aboutsummaryrefslogtreecommitdiff
path: root/src/xz
diff options
context:
space:
mode:
authorLasse Collin <lasse.collin@tukaani.org>2010-01-24 16:57:40 +0200
committerLasse Collin <lasse.collin@tukaani.org>2010-01-24 16:57:40 +0200
commit0dd6d007669b946543ca939a44243833c79e08f4 (patch)
treeb3aaf5b94676275a603616abb3620ef3a112c582 /src/xz
parentFix a typo in README. (diff)
downloadxz-0dd6d007669b946543ca939a44243833c79e08f4.tar.xz
Some improvements to printing sizes in xz.
Diffstat (limited to '')
-rw-r--r--src/xz/coder.c56
-rw-r--r--src/xz/message.c80
-rw-r--r--src/xz/message.h4
-rw-r--r--src/xz/util.c72
-rw-r--r--src/xz/util.h44
5 files changed, 166 insertions, 90 deletions
diff --git a/src/xz/coder.c b/src/xz/coder.c
index 0ab8e467..48dfd4a6 100644
--- a/src/xz/coder.c
+++ b/src/xz/coder.c
@@ -103,11 +103,12 @@ coder_add_filter(lzma_vli id, void *options)
static void lzma_attribute((noreturn))
-memlimit_too_small(uint64_t memory_usage, uint64_t memory_limit)
+memlimit_too_small(uint64_t memory_usage)
{
- message_fatal(_("Memory usage limit (%" PRIu64 " MiB) is too small "
- "for the given filter setup (%" PRIu64 " MiB)"),
- memory_limit >> 20, memory_usage >> 20);
+ message(V_ERROR, _("Memory usage limit is too low for the given "
+ "filter setup."));
+ message_mem_needed(V_ERROR, memory_usage);
+ tuklib_exit(E_ERROR, E_ERROR, false);
}
@@ -180,22 +181,18 @@ coder_set_compression_settings(void)
memory_usage = lzma_raw_decoder_memusage(filters);
if (memory_usage == UINT64_MAX)
- message_fatal("Unsupported filter chain or filter options");
+ message_fatal(_("Unsupported filter chain or filter options"));
- // Print memory usage info.
- message(V_DEBUG, _("%s MiB (%s B) of memory is required per thread, "
- "limit is %s MiB (%s B)"),
- uint64_to_str(memory_usage >> 20, 0),
- uint64_to_str(memory_usage, 1),
- uint64_to_str(memory_limit >> 20, 2),
- uint64_to_str(memory_limit, 3));
+ // Print memory usage info before possible dictionary
+ // size auto-adjusting.
+ message_mem_needed(V_DEBUG, memory_usage);
if (memory_usage > memory_limit) {
// If --no-auto-adjust was used or we didn't find LZMA1 or
// LZMA2 as the last filter, give an error immediatelly.
// --format=raw implies --no-auto-adjust.
if (!auto_adjust || opt_format == FORMAT_RAW)
- memlimit_too_small(memory_usage, memory_limit);
+ memlimit_too_small(memory_usage);
assert(opt_mode == MODE_COMPRESS);
@@ -206,7 +203,7 @@ coder_set_compression_settings(void)
while (filters[i].id != LZMA_FILTER_LZMA2
&& filters[i].id != LZMA_FILTER_LZMA1) {
if (filters[i].id == LZMA_VLI_UNKNOWN)
- memlimit_too_small(memory_usage, memory_limit);
+ memlimit_too_small(memory_usage);
++i;
}
@@ -225,7 +222,7 @@ coder_set_compression_settings(void)
// FIXME: Displays the scaled memory usage instead
// of the original.
if (opt->dict_size < (UINT32_C(1) << 20))
- memlimit_too_small(memory_usage, memory_limit);
+ memlimit_too_small(memory_usage);
memory_usage = lzma_raw_encoder_memusage(filters);
if (memory_usage == UINT64_MAX)
@@ -245,14 +242,17 @@ coder_set_compression_settings(void)
// However, omit the message if no preset or custom chain
// was given. FIXME: Always warn?
if (!preset_default)
- message(V_WARNING, "Adjusted LZMA%c dictionary size "
+ message(V_WARNING, _("Adjusted LZMA%c dictionary size "
"from %s MiB to %s MiB to not exceed "
- "the memory usage limit of %s MiB",
+ "the memory usage limit of %s"),
filters[i].id == LZMA_FILTER_LZMA2
? '2' : '1',
uint64_to_str(orig_dict_size >> 20, 0),
uint64_to_str(opt->dict_size >> 20, 1),
- uint64_to_str(memory_limit >> 20, 2));
+ uint64_to_nicestr(memory_limit,
+ NICESTR_B,
+ NICESTR_MIB,
+ false, 2));
}
/*
@@ -538,24 +538,10 @@ coder_normal(file_pair *pair)
}
if (ret == LZMA_MEMLIMIT_ERROR) {
- // Figure out how much memory it would have
+ // Display how much memory it would have
// actually needed.
- uint64_t memusage = lzma_memusage(&strm);
- uint64_t memlimit = hardware_memlimit_get();
-
- // Round the memory limit down and usage up.
- // This way we don't display a ridiculous
- // message like "Limit was 9 MiB, but 9 MiB
- // would have been needed".
- memusage = (memusage + 1024 * 1024 - 1)
- / (1024 * 1024);
- memlimit /= 1024 * 1024;
-
- message_error(_("Limit was %s MiB, "
- "but %s MiB would "
- "have been needed"),
- uint64_to_str(memlimit, 0),
- uint64_to_str(memusage, 1));
+ message_mem_needed(V_ERROR,
+ lzma_memusage(&strm));
}
if (stop)
diff --git a/src/xz/message.c b/src/xz/message.c
index eca90592..6c26d0b4 100644
--- a/src/xz/message.c
+++ b/src/xz/message.c
@@ -111,29 +111,6 @@ my_time(void)
}
-/// Wrapper for snprintf() to help constructing a string in pieces.
-static void lzma_attribute((format(printf, 3, 4)))
-my_snprintf(char **pos, size_t *left, const char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
- const int len = vsnprintf(*pos, *left, fmt, ap);
- va_end(ap);
-
- // If an error occurred, we want the caller to think that the whole
- // buffer was used. This way no more data will be written to the
- // buffer. We don't need better error handling here.
- if (len < 0 || (size_t)(len) >= *left) {
- *left = 0;
- } else {
- *pos += len;
- *left -= len;
- }
-
- return;
-}
-
-
extern void
message_init(void)
{
@@ -356,35 +333,6 @@ progress_percentage(uint64_t in_pos, bool final)
}
-static void
-progress_sizes_helper(char **pos, size_t *left, uint64_t value, bool final)
-{
- // Allow high precision only for the final message, since it looks
- // stupid for in-progress information.
- if (final) {
- // A maximum of four digits are allowed for exact byte count.
- if (value < 10000) {
- my_snprintf(pos, left, "%s B",
- uint64_to_str(value, 0));
- return;
- }
-
- // A maximum of five significant digits are allowed for KiB.
- if (value < UINT64_C(10239900)) {
- my_snprintf(pos, left, "%s KiB", double_to_str(
- (double)(value) / 1024.0));
- return;
- }
- }
-
- // Otherwise we use MiB.
- my_snprintf(pos, left, "%s MiB",
- double_to_str((double)(value) / (1024.0 * 1024.0)));
-
- return;
-}
-
-
/// Make the string containing the amount of input processed, amount of
/// output produced, and the compression ratio.
static const char *
@@ -401,9 +349,12 @@ progress_sizes(uint64_t compressed_pos, uint64_t uncompressed_pos, bool final)
// Print the sizes. If this the final message, use more reasonable
// units than MiB if the file was small.
- progress_sizes_helper(&pos, &left, compressed_pos, final);
- my_snprintf(&pos, &left, " / ");
- progress_sizes_helper(&pos, &left, uncompressed_pos, final);
+ const enum nicestr_unit unit_min = final ? NICESTR_B : NICESTR_MIB;
+ my_snprintf(&pos, &left, "%s / %s",
+ uint64_to_nicestr(compressed_pos,
+ unit_min, NICESTR_MIB, false, 0),
+ uint64_to_nicestr(uncompressed_pos,
+ unit_min, NICESTR_MIB, false, 1));
// Avoid division by zero. If we cannot calculate the ratio, set
// it to some nice number greater than 10.0 so that it gets caught
@@ -890,6 +841,25 @@ message_strm(lzma_ret code)
extern void
+message_mem_needed(enum message_verbosity v, uint64_t memusage)
+{
+ if (v > verbosity)
+ return;
+
+ // NOTE: With bad luck, the rounded values may be the same, which
+ // can be confusing to the user when this function is called to
+ // tell that the memory usage limit was too low.
+ message(v, _("%s of memory is required. The limit is %s."),
+ uint64_to_nicestr(memusage,
+ NICESTR_B, NICESTR_MIB, false, 0),
+ uint64_to_nicestr(hardware_memlimit_get(),
+ NICESTR_B, NICESTR_MIB, false, 1));
+
+ return;
+}
+
+
+extern void
message_filters(enum message_verbosity v, const lzma_filter *filters)
{
if (v > verbosity)
diff --git a/src/xz/message.h b/src/xz/message.h
index d9edb7c0..9edc403c 100644
--- a/src/xz/message.h
+++ b/src/xz/message.h
@@ -87,6 +87,10 @@ extern void message_signal_handler(void) lzma_attribute((noreturn));
extern const char *message_strm(lzma_ret code);
+/// Display how much memory was needed and how much the limit was.
+extern void message_mem_needed(enum message_verbosity v, uint64_t memusage);
+
+
/// Print the filter chain.
extern void message_filters(
enum message_verbosity v, const lzma_filter *filters);
diff --git a/src/xz/util.c b/src/xz/util.c
index c0ac5384..a962421f 100644
--- a/src/xz/util.c
+++ b/src/xz/util.c
@@ -11,6 +11,7 @@
///////////////////////////////////////////////////////////////////////////////
#include "private.h"
+#include <stdarg.h>
extern void *
@@ -144,6 +145,55 @@ uint64_to_str(uint64_t value, uint32_t slot)
extern const char *
+uint64_to_nicestr(uint64_t value, enum nicestr_unit unit_min,
+ enum nicestr_unit unit_max, bool always_also_bytes,
+ uint32_t slot)
+{
+ assert(unit_min <= unit_max);
+ assert(unit_max <= NICESTR_TIB);
+
+ enum nicestr_unit unit = NICESTR_B;
+ const char *str;
+
+ if ((unit_min == NICESTR_B && value < 10000)
+ || unit_max == NICESTR_B) {
+ // The value is shown as bytes.
+ str = uint64_to_str(value, slot);
+ } else {
+ // Scale the value to a nicer unit. Unless unit_min and
+ // unit_max limit us, we will show at most five significant
+ // digits with one decimal place.
+ double d = (double)(value);
+ do {
+ d /= 1024.0;
+ ++unit;
+ } while (unit < unit_min || (d > 9999.9 && unit < unit_max));
+
+ str = double_to_str(d);
+ }
+
+ static const char suffix[5][4] = { "B", "KiB", "MiB", "GiB", "TiB" };
+
+ // Minimum buffer size:
+ // 11 "1,234.5 MiB"
+ // 2 " ("
+ // 26 2^64 with thousand separators
+ // 3 " B)"
+ // 1 '\0'
+ // 43 Total
+ static char buf[4][44];
+ char *pos = buf[slot];
+ size_t left = sizeof(buf[slot]);
+ my_snprintf(&pos, &left, "%s %s", str, suffix[unit]);
+
+ if (always_also_bytes && value >= 10000)
+ snprintf(pos, left, " (%s B)", uint64_to_str(value, slot));
+
+ return buf[slot];
+}
+
+
+extern const char *
double_to_str(double value)
{
// 64 bytes is surely enough, since it won't fit in some other
@@ -166,6 +216,28 @@ double_to_str(double value)
}
+extern void
+my_snprintf(char **pos, size_t *left, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ const int len = vsnprintf(*pos, *left, fmt, ap);
+ va_end(ap);
+
+ // If an error occurred, we want the caller to think that the whole
+ // buffer was used. This way no more data will be written to the
+ // buffer. We don't need better error handling here.
+ if (len < 0 || (size_t)(len) >= *left) {
+ *left = 0;
+ } else {
+ *pos += len;
+ *left -= len;
+ }
+
+ return;
+}
+
+
/*
/// \brief Simple quoting to get rid of ASCII control characters
///
diff --git a/src/xz/util.h b/src/xz/util.h
index 3657eb80..67bf3075 100644
--- a/src/xz/util.h
+++ b/src/xz/util.h
@@ -54,6 +54,42 @@ extern uint64_t str_to_uint64(const char *name, const char *value,
extern const char *uint64_to_str(uint64_t value, uint32_t slot);
+enum nicestr_unit {
+ NICESTR_B,
+ NICESTR_KIB,
+ NICESTR_MIB,
+ NICESTR_GIB,
+ NICESTR_TIB,
+};
+
+
+/// \brief Convert uint64_t to a nice human readable string
+///
+/// This is like uint64_to_str() but uses B, KiB, MiB, GiB, or TiB suffix
+/// and optionally includes the exact size in parenthesis.
+///
+/// \param value Value to be printed
+/// \param unit_min Smallest unit to use. This and unit_max are used
+/// e.g. when showing the progress indicator to force
+/// the unit to MiB.
+/// \param unit_max Biggest unit to use. assert(unit_min <= unit_max).
+/// \param always_also_bytes
+/// Show also the exact byte value in parenthesis
+/// if the nicely formatted string uses bigger unit
+/// than bytes.
+/// \param slot Which static buffer to use to hold the string.
+/// This is shared with uint64_to_str().
+///
+/// \return Pointer to statically allocated buffer containing the string.
+///
+/// \note This uses double_to_str() internally so the static buffer
+/// in double_to_str() will be overwritten.
+///
+extern const char *uint64_to_nicestr(uint64_t value,
+ enum nicestr_unit unit_min, enum nicestr_unit unit_max,
+ bool always_also_bytes, uint32_t slot);
+
+
/// \brief Convert double to a string with one decimal place
///
/// This is like uint64_to_str() except that this converts a double and
@@ -61,6 +97,14 @@ extern const char *uint64_to_str(uint64_t value, uint32_t slot);
extern const char *double_to_str(double value);
+/// \brief Wrapper for snprintf() to help constructing a string in pieces
+///
+/// A maximum of *left bytes is written starting from *pos. *pos and *left
+/// are updated accordingly.
+extern void my_snprintf(char **pos, size_t *left, const char *fmt, ...)
+ lzma_attribute((format(printf, 3, 4)));
+
+
/// \brief Check if filename is empty and print an error message
extern bool is_empty_filename(const char *filename);