From 0dd6d007669b946543ca939a44243833c79e08f4 Mon Sep 17 00:00:00 2001 From: Lasse Collin Date: Sun, 24 Jan 2010 16:57:40 +0200 Subject: Some improvements to printing sizes in xz. --- src/xz/coder.c | 56 +++++++++++++++------------------------ src/xz/message.c | 80 ++++++++++++++++++-------------------------------------- src/xz/message.h | 4 +++ src/xz/util.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++ src/xz/util.h | 44 +++++++++++++++++++++++++++++++ 5 files changed, 166 insertions(+), 90 deletions(-) (limited to 'src/xz') diff --git a/src/xz/coder.c b/src/xz/coder.c index 0ab8e467..48dfd4a6 100644 --- a/src/xz/coder.c +++ b/src/xz/coder.c @@ -103,11 +103,12 @@ coder_add_filter(lzma_vli id, void *options) static void lzma_attribute((noreturn)) -memlimit_too_small(uint64_t memory_usage, uint64_t memory_limit) +memlimit_too_small(uint64_t memory_usage) { - message_fatal(_("Memory usage limit (%" PRIu64 " MiB) is too small " - "for the given filter setup (%" PRIu64 " MiB)"), - memory_limit >> 20, memory_usage >> 20); + message(V_ERROR, _("Memory usage limit is too low for the given " + "filter setup.")); + message_mem_needed(V_ERROR, memory_usage); + tuklib_exit(E_ERROR, E_ERROR, false); } @@ -180,22 +181,18 @@ coder_set_compression_settings(void) memory_usage = lzma_raw_decoder_memusage(filters); if (memory_usage == UINT64_MAX) - message_fatal("Unsupported filter chain or filter options"); + message_fatal(_("Unsupported filter chain or filter options")); - // Print memory usage info. - message(V_DEBUG, _("%s MiB (%s B) of memory is required per thread, " - "limit is %s MiB (%s B)"), - uint64_to_str(memory_usage >> 20, 0), - uint64_to_str(memory_usage, 1), - uint64_to_str(memory_limit >> 20, 2), - uint64_to_str(memory_limit, 3)); + // Print memory usage info before possible dictionary + // size auto-adjusting. + message_mem_needed(V_DEBUG, memory_usage); if (memory_usage > memory_limit) { // If --no-auto-adjust was used or we didn't find LZMA1 or // LZMA2 as the last filter, give an error immediatelly. // --format=raw implies --no-auto-adjust. if (!auto_adjust || opt_format == FORMAT_RAW) - memlimit_too_small(memory_usage, memory_limit); + memlimit_too_small(memory_usage); assert(opt_mode == MODE_COMPRESS); @@ -206,7 +203,7 @@ coder_set_compression_settings(void) while (filters[i].id != LZMA_FILTER_LZMA2 && filters[i].id != LZMA_FILTER_LZMA1) { if (filters[i].id == LZMA_VLI_UNKNOWN) - memlimit_too_small(memory_usage, memory_limit); + memlimit_too_small(memory_usage); ++i; } @@ -225,7 +222,7 @@ coder_set_compression_settings(void) // FIXME: Displays the scaled memory usage instead // of the original. if (opt->dict_size < (UINT32_C(1) << 20)) - memlimit_too_small(memory_usage, memory_limit); + memlimit_too_small(memory_usage); memory_usage = lzma_raw_encoder_memusage(filters); if (memory_usage == UINT64_MAX) @@ -245,14 +242,17 @@ coder_set_compression_settings(void) // However, omit the message if no preset or custom chain // was given. FIXME: Always warn? if (!preset_default) - message(V_WARNING, "Adjusted LZMA%c dictionary size " + message(V_WARNING, _("Adjusted LZMA%c dictionary size " "from %s MiB to %s MiB to not exceed " - "the memory usage limit of %s MiB", + "the memory usage limit of %s"), filters[i].id == LZMA_FILTER_LZMA2 ? '2' : '1', uint64_to_str(orig_dict_size >> 20, 0), uint64_to_str(opt->dict_size >> 20, 1), - uint64_to_str(memory_limit >> 20, 2)); + uint64_to_nicestr(memory_limit, + NICESTR_B, + NICESTR_MIB, + false, 2)); } /* @@ -538,24 +538,10 @@ coder_normal(file_pair *pair) } if (ret == LZMA_MEMLIMIT_ERROR) { - // Figure out how much memory it would have + // Display how much memory it would have // actually needed. - uint64_t memusage = lzma_memusage(&strm); - uint64_t memlimit = hardware_memlimit_get(); - - // Round the memory limit down and usage up. - // This way we don't display a ridiculous - // message like "Limit was 9 MiB, but 9 MiB - // would have been needed". - memusage = (memusage + 1024 * 1024 - 1) - / (1024 * 1024); - memlimit /= 1024 * 1024; - - message_error(_("Limit was %s MiB, " - "but %s MiB would " - "have been needed"), - uint64_to_str(memlimit, 0), - uint64_to_str(memusage, 1)); + message_mem_needed(V_ERROR, + lzma_memusage(&strm)); } if (stop) diff --git a/src/xz/message.c b/src/xz/message.c index eca90592..6c26d0b4 100644 --- a/src/xz/message.c +++ b/src/xz/message.c @@ -111,29 +111,6 @@ my_time(void) } -/// Wrapper for snprintf() to help constructing a string in pieces. -static void lzma_attribute((format(printf, 3, 4))) -my_snprintf(char **pos, size_t *left, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - const int len = vsnprintf(*pos, *left, fmt, ap); - va_end(ap); - - // If an error occurred, we want the caller to think that the whole - // buffer was used. This way no more data will be written to the - // buffer. We don't need better error handling here. - if (len < 0 || (size_t)(len) >= *left) { - *left = 0; - } else { - *pos += len; - *left -= len; - } - - return; -} - - extern void message_init(void) { @@ -356,35 +333,6 @@ progress_percentage(uint64_t in_pos, bool final) } -static void -progress_sizes_helper(char **pos, size_t *left, uint64_t value, bool final) -{ - // Allow high precision only for the final message, since it looks - // stupid for in-progress information. - if (final) { - // A maximum of four digits are allowed for exact byte count. - if (value < 10000) { - my_snprintf(pos, left, "%s B", - uint64_to_str(value, 0)); - return; - } - - // A maximum of five significant digits are allowed for KiB. - if (value < UINT64_C(10239900)) { - my_snprintf(pos, left, "%s KiB", double_to_str( - (double)(value) / 1024.0)); - return; - } - } - - // Otherwise we use MiB. - my_snprintf(pos, left, "%s MiB", - double_to_str((double)(value) / (1024.0 * 1024.0))); - - return; -} - - /// Make the string containing the amount of input processed, amount of /// output produced, and the compression ratio. static const char * @@ -401,9 +349,12 @@ progress_sizes(uint64_t compressed_pos, uint64_t uncompressed_pos, bool final) // Print the sizes. If this the final message, use more reasonable // units than MiB if the file was small. - progress_sizes_helper(&pos, &left, compressed_pos, final); - my_snprintf(&pos, &left, " / "); - progress_sizes_helper(&pos, &left, uncompressed_pos, final); + const enum nicestr_unit unit_min = final ? NICESTR_B : NICESTR_MIB; + my_snprintf(&pos, &left, "%s / %s", + uint64_to_nicestr(compressed_pos, + unit_min, NICESTR_MIB, false, 0), + uint64_to_nicestr(uncompressed_pos, + unit_min, NICESTR_MIB, false, 1)); // Avoid division by zero. If we cannot calculate the ratio, set // it to some nice number greater than 10.0 so that it gets caught @@ -889,6 +840,25 @@ message_strm(lzma_ret code) } +extern void +message_mem_needed(enum message_verbosity v, uint64_t memusage) +{ + if (v > verbosity) + return; + + // NOTE: With bad luck, the rounded values may be the same, which + // can be confusing to the user when this function is called to + // tell that the memory usage limit was too low. + message(v, _("%s of memory is required. The limit is %s."), + uint64_to_nicestr(memusage, + NICESTR_B, NICESTR_MIB, false, 0), + uint64_to_nicestr(hardware_memlimit_get(), + NICESTR_B, NICESTR_MIB, false, 1)); + + return; +} + + extern void message_filters(enum message_verbosity v, const lzma_filter *filters) { diff --git a/src/xz/message.h b/src/xz/message.h index d9edb7c0..9edc403c 100644 --- a/src/xz/message.h +++ b/src/xz/message.h @@ -87,6 +87,10 @@ extern void message_signal_handler(void) lzma_attribute((noreturn)); extern const char *message_strm(lzma_ret code); +/// Display how much memory was needed and how much the limit was. +extern void message_mem_needed(enum message_verbosity v, uint64_t memusage); + + /// Print the filter chain. extern void message_filters( enum message_verbosity v, const lzma_filter *filters); diff --git a/src/xz/util.c b/src/xz/util.c index c0ac5384..a962421f 100644 --- a/src/xz/util.c +++ b/src/xz/util.c @@ -11,6 +11,7 @@ /////////////////////////////////////////////////////////////////////////////// #include "private.h" +#include extern void * @@ -143,6 +144,55 @@ uint64_to_str(uint64_t value, uint32_t slot) } +extern const char * +uint64_to_nicestr(uint64_t value, enum nicestr_unit unit_min, + enum nicestr_unit unit_max, bool always_also_bytes, + uint32_t slot) +{ + assert(unit_min <= unit_max); + assert(unit_max <= NICESTR_TIB); + + enum nicestr_unit unit = NICESTR_B; + const char *str; + + if ((unit_min == NICESTR_B && value < 10000) + || unit_max == NICESTR_B) { + // The value is shown as bytes. + str = uint64_to_str(value, slot); + } else { + // Scale the value to a nicer unit. Unless unit_min and + // unit_max limit us, we will show at most five significant + // digits with one decimal place. + double d = (double)(value); + do { + d /= 1024.0; + ++unit; + } while (unit < unit_min || (d > 9999.9 && unit < unit_max)); + + str = double_to_str(d); + } + + static const char suffix[5][4] = { "B", "KiB", "MiB", "GiB", "TiB" }; + + // Minimum buffer size: + // 11 "1,234.5 MiB" + // 2 " (" + // 26 2^64 with thousand separators + // 3 " B)" + // 1 '\0' + // 43 Total + static char buf[4][44]; + char *pos = buf[slot]; + size_t left = sizeof(buf[slot]); + my_snprintf(&pos, &left, "%s %s", str, suffix[unit]); + + if (always_also_bytes && value >= 10000) + snprintf(pos, left, " (%s B)", uint64_to_str(value, slot)); + + return buf[slot]; +} + + extern const char * double_to_str(double value) { @@ -166,6 +216,28 @@ double_to_str(double value) } +extern void +my_snprintf(char **pos, size_t *left, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + const int len = vsnprintf(*pos, *left, fmt, ap); + va_end(ap); + + // If an error occurred, we want the caller to think that the whole + // buffer was used. This way no more data will be written to the + // buffer. We don't need better error handling here. + if (len < 0 || (size_t)(len) >= *left) { + *left = 0; + } else { + *pos += len; + *left -= len; + } + + return; +} + + /* /// \brief Simple quoting to get rid of ASCII control characters /// diff --git a/src/xz/util.h b/src/xz/util.h index 3657eb80..67bf3075 100644 --- a/src/xz/util.h +++ b/src/xz/util.h @@ -54,6 +54,42 @@ extern uint64_t str_to_uint64(const char *name, const char *value, extern const char *uint64_to_str(uint64_t value, uint32_t slot); +enum nicestr_unit { + NICESTR_B, + NICESTR_KIB, + NICESTR_MIB, + NICESTR_GIB, + NICESTR_TIB, +}; + + +/// \brief Convert uint64_t to a nice human readable string +/// +/// This is like uint64_to_str() but uses B, KiB, MiB, GiB, or TiB suffix +/// and optionally includes the exact size in parenthesis. +/// +/// \param value Value to be printed +/// \param unit_min Smallest unit to use. This and unit_max are used +/// e.g. when showing the progress indicator to force +/// the unit to MiB. +/// \param unit_max Biggest unit to use. assert(unit_min <= unit_max). +/// \param always_also_bytes +/// Show also the exact byte value in parenthesis +/// if the nicely formatted string uses bigger unit +/// than bytes. +/// \param slot Which static buffer to use to hold the string. +/// This is shared with uint64_to_str(). +/// +/// \return Pointer to statically allocated buffer containing the string. +/// +/// \note This uses double_to_str() internally so the static buffer +/// in double_to_str() will be overwritten. +/// +extern const char *uint64_to_nicestr(uint64_t value, + enum nicestr_unit unit_min, enum nicestr_unit unit_max, + bool always_also_bytes, uint32_t slot); + + /// \brief Convert double to a string with one decimal place /// /// This is like uint64_to_str() except that this converts a double and @@ -61,6 +97,14 @@ extern const char *uint64_to_str(uint64_t value, uint32_t slot); extern const char *double_to_str(double value); +/// \brief Wrapper for snprintf() to help constructing a string in pieces +/// +/// A maximum of *left bytes is written starting from *pos. *pos and *left +/// are updated accordingly. +extern void my_snprintf(char **pos, size_t *left, const char *fmt, ...) + lzma_attribute((format(printf, 3, 4))); + + /// \brief Check if filename is empty and print an error message extern bool is_empty_filename(const char *filename); -- cgit v1.2.3