Delete old and uneccessary digest, skel, etc

1 files changed, 0 insertions, 155 deletions

diff --git a/skel.ebuild b/skel.ebuild
deleted file mode 100644
index a9d82a2c..00000000
--- a/skel.ebuild
+++ /dev/null
@@ -1,155 +0,0 @@
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-# NOTE: The comments in this file are for instruction and documentation.  
-# They're not meant to appear with your final, production ebuild.  Please
-# remember to remove them before submitting or committing your ebuild.  That
-# doesn't mean you can't add your own comments though.
-
-# The 'Header' on the third line should just be left alone.  When your ebuild
-# will be committed to cvs, the details on that line will be automatically
-# generated to contain the correct data.
-
-# inherit lists eclasses to inherit functions from. Almost all ebuilds should
-# inherit eutils, as a large amount of important functionality has been
-# moved there. For example, the $(get_libdir) mentioned below wont work
-# without the following line:
-inherit eutils
-# A well-used example of an eclass function that needs eutils is epatch. If
-# your source needs patches applied, it's suggested to put your patch in the
-# 'files' directory and use:
-#
-#   epatch ${FILESDIR}/patch-name-here
-#
-# eclasses tend to list descriptions of how to use their functions properly.
-# take a look at /usr/portage/eclasses/ for more examples.
-
-# Short one-line description of this package.
-DESCRIPTION="This is a sample skeleton ebuild file"
-
-# Homepage, not used by Portage directly but handy for developer reference
-HOMEPAGE="http://foo.bar.com/"
-
-# Point to any required sources; these will be automatically downloaded by
-# Portage.
-SRC_URI="ftp://foo.bar.com/${P}.tar.gz"
-
-# License of the package.  This must match the name of file(s) in
-# /usr/portage/licenses/.  For complex license combination see the developer
-# docs on gentoo.org for details.
-LICENSE=""
-
-# The SLOT variable is used to tell Portage if it's OK to keep multiple
-# versions of the same package installed at the same time.  For example,
-# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible
-# with 1.2.2), it would be optimal to instruct Portage to not remove
-# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2.  To do this,
-# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2.
-# emerge clean understands SLOTs, and will keep the most recent version
-# of each SLOT and remove everything else.
-# Note that normal applications should use SLOT="0" if possible, since
-# there should only be exactly one version installed at a time.
-# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package.
-SLOT="0"
-
-# Using KEYWORDS, we can record masking information *inside* an ebuild
-# instead of relying on an external package.mask file.  Right now, you
-# should set the KEYWORDS variable for every ebuild so that it contains
-# the names of all the architectures with which the ebuild works.  All of
-# the official architectures can be found in the keywords.desc file which 
-# is in /usr/portage/profiles/.  Usually you should just set this to "~x86".  
-# The ~ in front of the architecture indicates that the package is new and 
-# should be considered unstable until testing proves its stability.  Once 
-# packages go stable the ~ prefix is removed.  So, if you've confirmed that 
-# your ebuild works on x86 and ppc, you'd specify: KEYWORDS="~x86 ~ppc"
-# For binary packages, use -* and then list the archs the bin package
-# exists for.  If the package was for an x86 binary package, then
-# KEYWORDS would be set like this: KEYWORDS="-* x86"
-# DO NOT USE KEYWORDS="*".  This is deprecated and only for backward
-# compatibility reasons.
-KEYWORDS="~x86"
-
-# Comprehensive list of any and all USE flags leveraged in the ebuild,
-# with the exception of any ARCH specific flags, i.e. "ppc", "sparc",
-# "x86" and "alpha".  This is a required variable.  If the ebuild doesn't 
-# use any USE flags, set to "".
-IUSE="X gnome"
-
-# A space delimited list of portage features to restrict. man 5 ebuild
-# for details.  Usually not needed.
-#RESTRICT="nostrip"
-
-# Build-time dependencies, such as
-#    ssl? ( >=dev-libs/openssl-0.9.6b )
-#    >=dev-lang/perl-5.6.1-r1
-# It is advisable to use the >= syntax show above, to reflect what you
-# had installed on your system when you tested the package.  Then
-# other users hopefully won't be caught without the right version of
-# a dependency.
-DEPEND=""
-
-# Run-time dependencies, same as DEPEND if RDEPEND isn't defined:
-#RDEPEND=""
-
-# Source directory; the dir where the sources can be found (automatically
-# unpacked) inside ${WORKDIR}.  The default value for S is ${WORKDIR}/${P}
-# If you don't need to change it, leave the S= line out of the ebuild
-# to keep it tidy.
-S=${WORKDIR}/${P}
-
-src_compile() {
-	# Most open-source packages use GNU autoconf for configuration.
-	# The quickest (and preferred) way of running configure is:
-	econf || die "econf failed"
-	#
-	# You could use something similar to the following lines to
-	# configure your package before compilation.  The "|| die" portion
-	# at the end will stop the build process if the command fails.
-	# You should use this at the end of critical commands in the build
-	# process.  (Hint: Most commands are critical, that is, the build
-	# process should abort if they aren't successful.)
-	#./configure \
-	#	--host=${CHOST} \
-	#	--prefix=/usr \
-	#	--infodir=/usr/share/info \
-	#	--mandir=/usr/share/man || die "./configure failed"
-	# Note the use of --infodir and --mandir, above. This is to make
-	# this package FHS 2.2-compliant.  For more information, see
-	#   http://www.pathname.com/fhs/
-
-	# emake (previously known as pmake) is a script that calls the
-	# standard GNU make with parallel building options for speedier
-	# builds (especially on SMP systems).  Try emake first.  It might
-	# not work for some packages, because some makefiles have bugs
-	# related to parallelism, in these cases, use emake -j1 to limit
-	# make to a single process.  The -j1 is a visual clue to others
-	# that the makefiles have bugs that have been worked around.
-	emake || die "emake failed"
-}
-
-src_install() {
-	# You must *personally verify* that this trick doesn't install
-	# anything outside of DESTDIR; do this by reading and
-	# understanding the install part of the Makefiles.
-	# This is the preferred way to install.
-	make DESTDIR=${D} install || die
-
-	# For Makefiles that don't make proper use of DESTDIR, setting
-	# prefix is often an alternative.  However if you do this, then
-	# you also need to specify mandir and infodir, since they were
-	# passed to ./configure as absolute paths (overriding the prefix
-	# setting).
-	#make \
-	#	prefix=${D}/usr \
-	#	mandir=${D}/usr/share/man \
-	#	infodir=${D}/usr/share/info \
-	#	libdir=${D}/usr/$(get_libdir) \
-	#	install || die
-	# Again, verify the Makefiles!  We don't want anything falling
-	# outside of ${D}.
-
-	# The portage shortcut to the above command is simply:
-	#
-	#einstall || die
-}