From c6ca26eef7cd07eba449035514e2b8f9ac3111c0 Mon Sep 17 00:00:00 2001 From: Lasse Collin Date: Sat, 27 Sep 2008 19:11:02 +0300 Subject: Updated file format specification. It changes the suffix of the new format to .xz and removes the recently added LZMA filter. --- doc/file-format.txt | 125 ++++++++++++++-------------------------------------- 1 file changed, 32 insertions(+), 93 deletions(-) (limited to 'doc') diff --git a/doc/file-format.txt b/doc/file-format.txt index 60ec6b72..b703d680 100644 --- a/doc/file-format.txt +++ b/doc/file-format.txt @@ -1,6 +1,6 @@ -The .lzma File Format ---------------------- +The .xz File Format +------------------- 0. Preface 0.1. Copyright Notices @@ -8,7 +8,7 @@ The .lzma File Format 1. Conventions 1.1. Byte and Its Representation 1.2. Multibyte Integers - 2. Overall Structure of .lzma File + 2. Overall Structure of .xz File 2.1. Stream 2.1.1. Stream Header 2.1.1.1. Header Magic Bytes @@ -43,11 +43,10 @@ The .lzma File Format 5.1. Alignment 5.2. Security 5.3. Filters - 5.3.1. LZMA - 5.3.2. LZMA2 - 5.3.3. Branch/Call/Jump Filters for Executables - 5.3.4. Delta - 5.3.4.1. Format of the Encoded Output + 5.3.1. LZMA2 + 5.3.2. Branch/Call/Jump Filters for Executables + 5.3.3. Delta + 5.3.3.1. Format of the Encoded Output 5.4. Custom Filter IDs 5.4.1. Reserved Custom Filter ID Ranges 6. Cyclic Redundancy Checks @@ -56,10 +55,10 @@ The .lzma File Format 0. Preface - This document describes the .lzma file format (filename suffix - `.lzma', MIME type `application/x-lzma'). It is intended that - this format replace the format used by the LZMA_Alone tool - included in LZMA SDK up to and including version 4.57. + This document describes the .xz file format (filename suffix + `.xz', MIME type `application/x-xz'). It is intended that this + this format replace the old .lzma format used by LZMA SDK and + LZMA Utils. IMPORTANT: The version described in this document is a draft, NOT a final, official version. Changes @@ -86,7 +85,7 @@ The .lzma File Format 0.2. Changes - Last modified: 2008-09-07 10:20+0300 + Last modified: 2008-09-24 21:05+0300 (A changelog will be kept once the first official version is made.) @@ -205,7 +204,7 @@ The .lzma File Format } -2. Overall Structure of .lzma File +2. Overall Structure of .xz File +========+================+========+================+ | Stream | Stream Padding | Stream | Stream Padding | ... @@ -243,9 +242,9 @@ The .lzma File Format The same limit applies to the total amount of uncompressed data stored in a Stream. - If an implementation supports handling .lzma files with - multiple concatenated Streams, it may apply the above limits - to the file as a whole instead of limiting per Stream basis. + If an implementation supports handling .xz files with multiple + concatenated Streams, it may apply the above limits to the file + as a whole instead of limiting per Stream basis. 2.1.1. Stream Header @@ -262,15 +261,15 @@ The .lzma File Format Using a C array and ASCII: const uint8_t HEADER_MAGIC[6] - = { 0xFF, 'L', 'Z', 'M', 'A', 0x00 }; + = { 0xFD, '7', 'z', 'X', 'Z', 0x00 }; In plain hexadecimal: - FF 4C 5A 4D 41 00 + FD 37 7A 58 5A 00 Notes: - - The first byte (0xFF) was chosen so that the files cannot - be erroneously detected as being in LZMA_Alone format, in - which the first byte is in the range [0x00, 0xE0]. + - The first byte (0xFD) was chosen so that the files cannot + be erroneously detected as being in .lzma format, in which + the first byte is in the range [0x00, 0xE0]. - The sixth byte (0x00) was chosen to prevent applications from misdetecting the file as a text file. @@ -704,15 +703,15 @@ The .lzma File Format PowerPC executable files in the archive stream start at offsets that are multiples of four bytes. - Some filters, for example LZMA, can be configured to take + Some filters, for example LZMA2, can be configured to take advantage of specified alignment of input data. Note that taking advantage of aligned input can be benefical also when a filter is not the first filter in the chain. For example, if you compress PowerPC executables, you may want to use the - PowerPC filter and chain that with the LZMA filter. Because not - only the input but also the output alignment of the PowerPC - filter is four bytes, it is now benefical to set LZMA settings - so that the LZMA encoder can take advantage of its + PowerPC filter and chain that with the LZMA2 filter. Because + not only the input but also the output alignment of the PowerPC + filter is four bytes, it is now benefical to set LZMA2 settings + so that the LZMA2 encoder can take advantage of its four-byte-aligned input data. The output of the last filter in the chain is stored to the @@ -770,78 +769,18 @@ The .lzma File Format 5.3. Filters -5.3.1. LZMA +5.3.1. LZMA2 LZMA (Lempel-Ziv-Markov chain-Algorithm) is a general-purporse compression algorithm with high compression ratio and fast decompression. LZMA is based on LZ77 and range coding algorithms. - Filter ID: 0x20 - Size of Filter Properties: 5 bytes - Changes size of data: Yes - Allow as a non-last filter: No - Allow as the last filter: Yes - - Preferred alignment: - Input data: Adjustable to 1/2/4/8/16 byte(s) - Output data: 1 byte - - At the time of writing, there is no other documentation about - how LZMA works than the source code in LZMA SDK. Once such - documentation gets written, it will probably be published as - a separate document, because including the documentation here - would lengthen this document considerably. - - The format of the Filter Properties field is as follows: - - +-----------------+----+----+----+----+ - | LZMA Properties | Dictionary Size | - +-----------------+----+----+----+----+ - - The LZMA Properties field contains three properties. An - abbreviation is given in parentheses, followed by the value - range of the property. The field consists of - - 1) the number of literal context bits (lc, [0, 4]); - 2) the number of literal position bits (lp, [0, 4]); and - 3) the number of position bits (pb, [0, 4]). - - In addition to above ranges, the sum of lc and lp must not - exceed four. Note that this limit didn't exist in the old - LZMA_Alone format, which allowed lc to be in the range [0, 8]. - - The properties are encoded using the following formula: - - LZMA Properties = (pb * 5 + lp) * 9 + lc - - The following C code illustrates a straightforward way to - decode the properties: - - uint8_t lc, lp, pb; - uint8_t prop = get_lzma_properties(); - if (prop > (4 * 5 + 4) * 9 + 8) - return LZMA_PROPERTIES_ERROR; - - pb = prop / (9 * 5); - prop -= pb * 9 * 5; - lp = prop / 9; - lc = prop - lp * 9; - - if (lc + lp > 4) - return LZMA_PROPERTIES_ERROR; - - Dictionary Size is encoded as unsigned 32-bit little endian - integer. - - -5.3.2. LZMA2 - LZMA2 is an extensions on top of the original LZMA. LZMA2 uses LZMA internally, but adds support for flushing the encoder, uncompressed chunks, eases stateful decoder implementations, - and improves support for multithreading. For most uses, it is - recommended to use LZMA2 instead of LZMA. + and improves support for multithreading. Thus, the plain LZMA + will not be supported in this file format. Filter ID: 0x21 Size of Filter Properties: 1 byte @@ -896,7 +835,7 @@ The .lzma File Format } -5.3.3. Branch/Call/Jump Filters for Executables +5.3.2. Branch/Call/Jump Filters for Executables These filters convert relative branch, call, and jump instructions to their absolute counterparts in executable @@ -936,7 +875,7 @@ The .lzma File Format the Subblock filter. -5.3.4. Delta +5.3.3. Delta The Delta filter may increase compression ratio when the value of the next byte correlates with the value of an earlier byte @@ -957,7 +896,7 @@ The .lzma File Format distance of 1 byte and 0xFF distance of 256 bytes. -5.3.4.1. Format of the Encoded Output +5.3.3.1. Format of the Encoded Output The code below illustrates both encoding and decoding with the Delta filter. -- cgit v1.2.3