| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
This hopefully does more good than bad:
+ It's faster by default.
+ Only the threaded compressor creates files that
can be decompressed in threaded mode.
- Compression ratio is worse, usually not too much though.
When it matters, -T1 must be used.
- Memory usage increases.
- Scripts that assume single-threaded mode but don't use -T1 will
possibly use too much resources, for example, if they run
multiple xz processes in parallel to compress multiple files.
- Output from single-threaded and multi-threaded compressors
differ but such changes could happen for other reasons too
(they just haven't happened since 5.0.0).
|
|
|
|
Not all RISC-V processors support fast unaligned access so
it's better to read only one byte in the main loop. This can
be faster even on x86-64 when compared to reading 32 bits at
a time as half the time the address is only 16-bit aligned.
The downside is larger code size on archs that do support
fast unaligned access.
|
|
Version 5.6.0 will be shown, even though upcoming alphas and betas
will be able to support this filter. 5.6.0 looks nicer in the output and
people shouldn't be encouraged to use an unstable version in production
in any way.
|
|
|
|
A special note was added to suggest using four-byte alignment when the
compressed instruction extension is not present in a RISC-V binary.
|
|
|
|
The new Filter ID is 0x0B.
Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter,
the xz CLI updates, and the Autotools build system modifications.
Thanks to Igor Pavlov for his many contributions to the design of
the filter.
|
|
|
|
|
|
|
|
Now crc_simd_body() in crc_x86_clmul.h is only called once
in a translation unit, we no longer need to be so cautious
about ensuring the always-inline behavior.
|
|
|
|
CRC_CLMUL was split to CRC_ARCH_OPTIMIZED and CRC_X86_CLMUL.
CRC_ARCH_OPTIMIZED is defined when an arch-optimized version is used.
Currently the x86 CLMUL implementations are the only arch-optimized
versions, and these also use the CRC_x86_CLMUL macro to tell when
crc_x86_clmul.h needs to be included.
is_clmul_supported() was renamed to is_arch_extension_supported().
crc32_clmul() and crc64_clmul() were renamed to
crc32_arch_optimized() and crc64_arch_optimized().
This way the names make sense with arch-specific non-CLMUL
implementations as well.
|
|
|
|
A CLMUL-only build will have the crcxx_clmul() inlined into
lzma_crcxx(). Previously a jump to the extern lzma_crcxx_clmul()
was needed. Notes about shared liblzma on ELF platforms:
- On platforms that support ifunc and -fvisibility=hidden, this
was silly because CLMUL-only build would have that single extra
jump instruction of extra overhead.
- On platforms that support neither -fvisibility=hidden nor linker
version script (liblzma*.map), jumping to lzma_crcxx_clmul()
would go via PLT so a few more instructions of overhead (still
not a big issue but silly nevertheless).
There was a downside with static liblzma too: if an application only
needs lzma_crc64(), static linking would make the linker include the
CLMUL code for both CRC32 and CRC64 from crc_x86_clmul.o even though
the CRC32 code wouldn't be needed, thus increasing code size of the
executable (assuming that -ffunction-sections isn't used).
Also, now compilers are likely to inline crc_simd_body()
even if they don't support the always_inline attribute
(or MSVC's __forceinline). Quite possibly all compilers
that build the code do support such an attribute. But now
it likely isn't a problem even if the attribute wasn't supported.
Now all x86-specific stuff is in crc_x86_clmul.h. If other archs
The other archs can then have their own headers with their own
is_clmul_supported() and crcxx_clmul().
Another bonus is that the build system doesn't need to care if
crc_clmul.c is needed.
is_clmul_supported() stays as inline function as it's not needed
when doing a CLMUL-only build (avoids a warning about unused function).
|
|
This reduces the number of the complex #if directives.
|
|
|
|
|
|
And remove one too.
|
|
It makes no difference in practice.
|
|
It requires fast unaligned access to 64-bit integers
and a fast instruction to count leading zeros in
a 64-bit integer (__builtin_ctzll()). This perhaps
should be enabled on some other archs too.
Thanks to Chenxi Mao for the original patch:
https://github.com/tukaani-project/xz/pull/75 (the first commit)
According to the numbers there, this may improve encoding
speed by about 3-5 %.
This enables the 8-byte method on MSVC ARM64 too which
should work but wasn't tested.
|
|
This change hopefully makes no practical difference as Clang
likely was detected via __GNUC__ or _MSC_VER already.
|
|
This comment is repeated in xzdec.c to help remind us why all the
capabilities are removed from stdin in certain situations.
|
|
A very strict sandbox is used when the last file is decompressed. The
likely most common use case of xzdec is to decompress a single file.
The Pledge sandbox is applied to the entire process with slightly more
relaxed promises, until the last file is processed.
Thanks to Christian Weisgerber for the initial patch adding Pledge
sandboxing.
|
|
This fixes the recent change to lzma_lz_encoder that used memzero
instead of the NULL constant. On some compilers the NULL constant
(always 0) may not equal the NULL pointer (this only needs to guarentee
to not point to valid memory address).
Later code compares the pointers to the NULL pointer so we must
initialize them with the NULL pointer instead of 0 to guarentee
code correctness.
|
|
The first member of lzma_lz_encoder doesn't necessarily need to be set
to NULL since it will always be set before anything tries to use it.
However the function pointer members must be set to NULL since other
functions rely on this NULL value to determine if this behavior is
supported or not.
This fixes a somewhat serious bug, where the options_update() and
set_out_limit() function pointers are not set to NULL. This seems to
have been forgotten since these function pointers were added many years
after the original two (code() and end()).
The problem is that by not setting this to NULL we are relying on the
memory allocation to zero things out if lzma_filters_update() is called
on a LZMA1 encoder. The function pointer for set_out_limit() is less
serious because there is not an API function that could call this in an
incorrect way. set_out_limit() is only called by the MicroLZMA encoder,
which must use LZMA1 where set_out_limit() is always set. Its currently
not possible to call set_out_limit() on an LZMA2 encoder at this time.
So calling lzma_filters_update() on an LZMA1 encoder had undefined
behavior since its possible that memory could be manipulated so the
options_update member pointed to a different instruction sequence.
This is unlikely to be a bug in an existing application since it relies
on calling lzma_filters_update() on an LZMA1 encoder in the first place.
For instance, it does not affect xz because lzma_filters_update() can
only be used when encoding to the .xz format.
This is fixed by using memzero() to set all members of lzma_lz_encoder
to NULL after it is allocated. This ensures this mistake will not occur
here in the future if any additional function pointers are added.
|
|
|
|
lzma_raw_encoder() and lzma_raw_encoder_init() used "options" as the
parameter name instead of "filters" (used by the declaration). "filters"
is more clear since the parameter represents the list of filters passed
to the raw encoder, each of which contains filter options.
|
|
lzma_encoder_init() did not check for NULL options, but
lzma2_encoder_init() did. This is more of a code style improvement than
anything else to help make lzma_encoder_init() and lzma2_encoder_init()
more similar.
|
|
|
|
|
|
|
|
The new is_tty() will report if a file descriptor is a terminal or not.
On POSIX systems, it is a wrapper around isatty(). However, the native
Windows implementation of isatty() will return true for all character
devices, not just terminals. So is_tty() has a special case for Windows
so it can use alternative Windows API functions to determine if a file
descriptor is a terminal.
This fixes a bug with MSVC and MinGW-w64 builds that refused to read from
or write to non-terminal character devices because xz thought it was a
terminal. For instance:
xz foo -c > /dev/null
would fail because /dev/null was assumed to be a terminal.
|
|
Based on internet dictionary searches, 'choise' is an outdated spelling
of 'choice'.
|
|
Now it reads from argv[] instead of args->arg_names.
|
|
The following command caused a segmentation fault:
xz -Fraw --lzma1 --files=foo
when foo was a valid file. The usage of --files or --files0 was not
being checked when compressing or decompressing in raw mode without a
suffix. The suffix checking code was meant to validate that all files
to be processed are "-" (if not writing to standard out), meaning the
data is only coming from standard in. In this case, there were no file
names to check since --files and --files0 store their file name in a
different place.
Later code assumed the suffix was set and caused a segmentation fault.
Now, the above command results in an error.
|
|
The previous version set opt_stdout, but this caused an issue with
copying an input file to standard out when decompressing an unknown file
type. The following needs to result in an error:
echo foo | xz -df
since -c, --stdout is not used. This fixes the previous error by not
setting opt_stdout.
|
|
This fixes a bug introduced in cc5aa9ab138beeecaee5a1e81197591893ee9ca0
when the suffix check was initially moved. This caused a situation that
previously worked:
echo foo | xz -Fraw --lzma1 | wc -c
to fail because the old code knew that this would write to standard out
so a suffix was not needed.
|
|
If the -c, --stdout argument is not used, then we can still detect when
the data will be written to standard out if all of the provided
filenames are "-" (denoting standard in) or if no filenames are
provided.
|
|
|
|
The macro lzma_attr_visibility_hidden has to be defined to make
fastpos.h usable. The visibility attribute is irrelevant to
fastpos_tablegen.c so simply #define the macro to an empty value.
fastpos_tablegen.c is never built by the included build systems
and so the problem wasn't noticed earlier. It's just a standalone
program for generating fastpos_table.c.
Fixes: https://github.com/tukaani-project/xz/pull/69
Thanks to GitHub user Jamaika1.
|
|
Solaris Studio is a possible example (not tested) which
supports the always_inline attribute but might not get
detected by the common.h #ifdefs.
|
|
|
|
|
|
These variables are internal to liblzma and not exposed in the API.
|
|
In ELF shared libs:
-fvisibility=hidden affects definitions of symbols but not
declarations.[*] This doesn't affect direct calls to functions
inside liblzma as a linker can replace a call to lzma_foo@plt
with a call directly to lzma_foo when -fvisibility=hidden is used.
[*] It has to be like this because otherwise every installed
header file would need to explictly set the symbol visibility
to default.
When accessing extern variables that aren't defined in the
same translation unit, compiler assumes that the variable has
the default visibility and thus indirection is needed. Unlike
function calls, linker cannot optimize this.
Using __attribute__((__visibility__("hidden"))) with the extern
variable declarations tells the compiler that indirection isn't
needed because the definition is in the same shared library.
About 15+ years ago, someone told me that it would be good if
the CRC tables would be defined in the same translation unit
as the C code of the CRC functions. While I understood that it
could help a tiny amount, I didn't want to change the code because
a separate translation unit for the CRC tables was needed for the
x86 assembly code anyway. But when visibility attributes are
supported, simply marking the extern declaration with the
hidden attribute will get identical result. When there are only
a few affected variables, this is trivial to do. I wish I had
understood this back then already.
|
|
MinGW (formely a MinGW.org Project, later the MinGW.OSDN Project
at <https://osdn.net/projects/mingw/>) has GCC 9.2.0 as the
most recent GCC package (released 2021-02-02). The project might
still be alive but majority of people have switched to MinGW-w64.
Thus it seems clearer to refer to MinGW-w64 in our API headers too.
Building with MinGW is likely to still work but I haven't tested it
in the recent years.
|
|
It properly adds -DLZMA_API_STATIC when compiling code that
will be linked against static liblzma. Having it there on
systems other than Windows does no harm.
See: https://www.msys2.org/docs/pkgconfig/
|
|
It is enabled only when decompressing one file to stdout,
similar to how Capsicum is used.
Landlock was added in Linux 5.13.
|
|
This removes support for FreeBSD 10.0 and 10.1 which used
<sys/capability.h> instead of <sys/capsicum.h>. Support for
FreeBSD 10.1 ended on 2016-12-31. So now FreeBSD >= 10.2 is
required to enable Capsicum support.
This also removes support for Capsicum on Linux (libcaprights)
which seems to have been unmaintained since 2017 and Linux 4.11:
https://github.com/google/capsicum-linux
|
|
If winpthreads are used for threading, it's OK to use clock_gettime()
from winpthreads too.
|
|
This might be almost useless but it doesn't need much extra code either.
|
|
This commit alone doesn't change anything in the real-world:
- configure.ac currently checks for clock_gettime() only
when using pthreads.
- CMakeLists.txt doesn't check for clock_gettime() on Windows.
So clock_gettime() wasn't used with MinGW-w64 before either.
clock_gettime() provides monotonic time and it's better than
gettimeofday() in this sense. But clock_gettime() is defined
in winpthreads, and liblzma or xz needs nothing else from
winpthreads. By avoiding clock_gettime(), we avoid the dependency on
libwinpthread-1.dll or the need to link against the static version.
As a bonus, GetTickCount64() and MinGW-w64's gettimeofday() can be
faster than clock_gettime(CLOCK_MONOTONIC, &tv). The resolution
is more than good enough for the progress indicator in xz.
|
|
|
|
This partially reverts creating crc_clmul.c
(8c0f9376f58c0696d5d6719705164d35542dd891) where is_clmul_supported()
was moved, extern'ed, and renamed to lzma_is_clmul_supported(). This
caused a problem when the function call to lzma_is_clmul_supported()
results in a call through the PLT. ifunc resolvers run very early in
the dynamic loading sequence, so the PLT may not be setup properly at
this point. Whether the PLT is used or not for
lzma_is_clmul_supported() depened upon the compiler-toolchain used and
flags.
In liblzma compiled with GCC, for instance, GCC will go through the PLT
for function calls internal to liblzma if the version scripts and
symbol visibility hiding are not used. If lazy-binding is disabled,
then it would have made any program linked with liblzma fail during
dynamic loading in the ifunc resolver.
|
|
Currently crc32 is always enabled, so COND_CHECK_CRC32 must always be
set. Because of this, it makes the recent change to conditionally
compile check/crc_clmul.c appear wrong since that file has CLMUL
implementations for both CRC32 and CRC64.
|
|
After forcing crc_simd_body() to always be inlined it caused
-fsanitize=address to fail for lzma_crc32_clmul() and
lzma_crc64_clmul(). The __no_sanitize_address__ attribute was added
to lzma_crc32_clmul() and lzma_crc64_clmul(), but not removed from
crc_simd_body(). ASAN and inline functions behavior has changed over
the years for GCC specifically, so while strictly required we will
keep __attribute__((__no_sanitize_address__)) on crc_simd_body() in
case this becomes a requirement in the future.
Older GCC versions refuse to inline a function with ASAN if the
caller and callee do not agree on sanitization flags
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124#c3). If the
function was forced to be inlined, it will not compile if the callee
function has __no_sanitize_address__ but the caller doesn't.
|
|
In XZ Utils context this doesn't matter much because
unaligned reads and writes aren't used in hot code
when TUKLIB_FAST_UNALIGNED_ACCESS isn't #defined.
|
|
|
|
After testing a 32-bit Release build on MSVC, only lzma_crc64_clmul()
has the bug. crc_simd_body() and lzma_crc32_clmul() do not need the
optimizations disabled.
|
|
|
|
crc_common.h depends on common.h. The headers include common.h except
when there is a reason to not do so.
|
|
|
|
Forcing this to be inline has a significant speed improvement at the
cost of a few repeated instructions. The compilers tested on did not
inline this function since it is large and is used twice in the same
translation unit.
|
|
This macro must be used instead of the inline keyword. On MSVC, it is
a replacement for __forceinline which is an MSVC specific keyword that
should not be used with inline (it will issue a warning if it is).
It does not use a build system check to determine if
__attribute__((__always_inline__)) since all compilers that can use
CLMUL extensions (except the special case for MSVC) should support this
attribute. If this assumption is incorrect then it will result in a bug
report instead of silently producing slow code.
|
|
A detailed description of the three dispatch methods was added. Also,
duplicated comments now only appear in crc32_fast.c or were removed from
both crc32_fast.c and crc64_fast.c if they appeared in crc_clmul.c.
|
|
Both crc32_clmul() and crc64_clmul() are now exported from
crc32_clmul.c as lzma_crc32_clmul() and lzma_crc64_clmul(). This
ensures that is_clmul_supported() (now lzma_is_clmul_supported()) is
not duplicated between crc32_fast.c and crc64_fast.c.
Also, it encapsulates the complexity of the CLMUL implementations into a
single file and reduces the complexity of crc32_fast.c and crc64_fast.c.
Before, CLMUL code was present in crc32_fast.c, crc64_fast.c, and
crc_common.h.
During the conversion, various cleanups were applied to code (thanks to
Lasse Collin) including:
- Require using semicolons with MASK_/L/H/LH macros.
- Variable typing and const handling improvements.
- Improvements to comments.
- Fixes to the pragmas used.
- Removed unneeded variables.
- Whitespace improvements.
- Fixed CRC_USE_GENERIC_FOR_SMALL_INPUTS handling.
- Silenced warnings and removed the need for some #pragmas
|
|
When ifunc is supported, we can define a simpler macro instead of
repeating the more complex check in both crc32_fast.c and crc64_fast.c.
|
|
|
|
crc64_fast.c was updated to use the code from crc_common.h instead.
|
|
|
|
The C standards don't allow an empty translation unit which can be
avoided by declaring something, without exporting any symbols.
When I committed f644473a211394447824ea00518d0a214ff3f7f2 I had
a feeling that some specific toolchain somewhere didn't like
empty object files (assembler or maybe "ar" complained) but
I cannot find anything to confirm this now. Quite likely I
remembered nonsense. I leave this here as a note to my future self. :-)
|
|
When the generic fast crc64 method is used, then we omit
lzma_crc64_table[][]. Similar to
d9166b52cf3458a4da3eb92224837ca8fc208d79, we can avoid compiler warnings
with -Wempty-translation-unit (Clang) or -pedantic (GCC) by creating a
never used typedef instead of an extra symbol.
|
|
|
|
|
|
This was done for both internal and API headers.
|
|
|
|
|
|
Before this commit, the following writes "foo" to the
console and deletes the input file:
echo foo | xz > con_xz
xz --suffix=_xz --decompress con_xz
It cannot happen without --suffix because names like con.xz
are also special and so attempting to decompress con.xz
(or compress con to con.xz) will already fail when opening
the input file.
Similar thing is possible when compressing. The following
writes to "nul" and the input file "n" is deleted.
echo foo | xz > n
xz --suffix=ul n
Now xz checks if the destination is a special file before
continuing. DOS/DJGPP version had a check for this but
Windows (and OS/2) didn't.
|
|
This also drops the check for _WIN32 as that shouldn't be needed.
|
|
The API headers have many attributes but these were left
as is for now.
|
|
For compatibility with C23's [[noreturn]], tuklib_attr_noreturn
must be at the beginning of declaration (before "extern" or
"static", and even before any GNU C's __attribute__).
This commit also moves all other function attributes to
the beginning of function declarations. "extern" is kept
at the beginning of a line so the attributes are listed on
separate lines before "extern" or "static".
|
|
xrealloc() is obviously incorrect, modern GCC docs even
mention realloc() as an example where this attribute
cannot be used.
liblzma's lzma_alloc() and lzma_alloc_zero() would be
correct uses most of the time but custom allocators
may use a memory pool or otherwise hold the pointer
so aliasing issues could happen in theory.
The xstrdup() case likely was correct but I removed it anyway.
Now there are no __malloc__ attributes left in the code.
The allocations aren't in hot paths so this should make
no practical difference.
|
|
This makes no difference for GCC or Clang as they support
GNU C's __attribute__((__noreturn__)) but this helps with MSVC:
- VS 2019 version 16.7 and later support _Noreturn if the
options /std:c11 or /std:c17 are used. This gets handled
with the check for __STDC_VERSION__ >= 201112.
- When MSVC isn't in C11/C17 mode, __declspec(noreturn) is used.
C23 will deprecate _Noreturn (and <stdnoreturn.h>)
for [[noreturn]]. This commit anticipates that but
the final __STDC_VERSION__ value isn't known yet.
|
|
Thanks to Kelvin Lee for the original patches
and testing the modifications I made.
|
|
It's available since Windows Vista.
|
|
|
|
|
|
|
|
|
|
|
|
Thanks to Agostino Sarubbo.
Fixes: https://github.com/tukaani-project/xz/issues/62
|
|
Now the two variations of the format strings are created with
a macro, and the whole detection code can be easily disabled
on platforms where thousand separator formatting is known to
not work (MSVC has no support, and on DJGPP 2.05 it can have
problems in some cases).
|
|
SSIZE_MAX isn't readily available on MSVC. Removing it means
that there is one thing less to worry when porting to MSVC.
|
|
The argument to vli_ceil4() should always guarantee the return value
is also a valid lzma_vli. Thus the highest three valid lzma_vli values
are invalid arguments. All uses of the function ensure this so the
assert is updated to match this.
|
|
This was not a security bug since there was no path to overflow
UINT64_MAX in lzma_index_append() or when it calls index_file_size().
The bug was discovered by a failing assert() in vli_ceil4() when called
from index_file_size() when unpadded_sum (the sum of the compressed size
of current Stream and the unpadded_size parameter) exceeds LZMA_VLI_MAX.
Previously, the unpadded_size parameter was checked to be not greater
than UNPADDED_SIZE_MAX, but no check was done once compressed_base was
added.
This could not have caused an integer overflow in index_file_size() when
called by lzma_index_append(). The calculation for file_size breaks down
into the sum of:
- Compressed base from all previous Streams
- 2 * LZMA_STREAM_HEADER_SIZE (size of the current Streams header and
footer)
- stream_padding (can be set by lzma_index_stream_padding())
- Compressed base from the current Stream
- Unpadded size (parameter to lzma_index_append())
The sum of everything except for Unpadded size must be less than
LZMA_VLI_MAX. This is guarenteed by overflow checks in the functions
that can set these values including lzma_index_stream_padding(),
lzma_index_append(), and lzma_index_cat(). The maximum value for
Unpadded size is enforced by lzma_index_append() to be less than or
equal UNPADDED_SIZE_MAX. Thus, the sum cannot exceed UINT64_MAX since
LZMA_VLI_MAX is half of UINT64_MAX.
Thanks to Joona Kannisto for reporting this.
|
|
The "once_" variable was accidentally referred to as just "once". This
prevented building with Vista threads when
HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR was not defined.
|
|
|
|
signal.h in WASI SDK doesn't currently provide sigprocmask()
or sigset_t. liblzma doesn't need them so this change makes
liblzma and xzdec build against WASI SDK. xz doesn't build yet
and the tests don't either as tuktest needs setjmp() which
isn't (yet?) implemented in WASI SDK.
Closes: https://github.com/tukaani-project/xz/pull/57
See also: https://github.com/tukaani-project/xz/pull/56
(The original commit was edited a little by Lasse Collin.)
|
|
|
|
To workaround Automake lacking Windows resource compiler support, an
empty source file is compiled to overwrite the resource files for static
library builds. Translation units without an external declaration are
not allowed by the C standard and result in a warning when used with
-Wempty-translation-unit (Clang) or -pedantic (GCC).
|
|
Clang 16.0.0 and earlier have a bug that the ifunc resolver function
triggers the -Wunused-function warning. The resolver function is static
and only "used" by the __attribute__((__ifunc()__)).
At this time, the bug is still unresolved, but has been reported:
https://github.com/llvm/llvm-project/issues/63957
This is not a problem in GCC.
|
|
This further improves the documentation from commit
f36ca7982f6bd5e9827219ed4f3c5a1fbf5d7bdf. The previous wording of
"supported options" was slightly misleading since the options that are
printed are the ones that are relevant for encoding/decoding. It is not
about which options can or must be specified.
|
|
The comment used "flag" when referring to decoder options. Just
referring to them as options is more clear and consistent.
|
|
This string is used to print a filename when using "xz -v" and
stderr isn't a terminal.
|
|
|
|
Maybe ICC always #defines _MSC_VER on Windows but now
it's very clear which code will get used.
|
|
|
|
|
|
The Memory limit information section described three output
columns when it actually has six. This was reworded to
"multiple" to make it more future proof.
|
|
* Moved max_block_list_size from a global to local variable.
* Reworded error message in validate_block_list_filter().
* Removed helper function filter_chain_error().
* Changed 1 << X to 1U << X in many places
|
|
|
|
|
|
Changed will print => prints in xz --robot --version description to
match --robot --info-memory description.
|
|
The order is now consistent with the order the command line arguments
are documented earlier in the man page. The new order is:
1. --list
2. --info-memory
3. --version
Instead of the previous order:
1. --version
2. --info-memory
3. --list
|
|
|
|
The --filters-help can be used to help create filter chains with the
--filters and --filtersX options. The message in --long-help is too
short to fully explain the syntax to construct complex filter chains.
In --robot mode, xz will only print the output from liblzma function
lzma_str_list_filters.
|
|
The --block-list option description needed updating since the new
--filtersX option changes how it can be used. The new entry for
--filters1=FILTERS ... --filter9=FILTERS was created right after
the --filters option.
|
|
|
|
If a filter chain is set but not used in --block-list, it introduced
unexpected behavior such as requiring an unneeded amount of memory to
compress, reducing the number of threads in multi-threaded encoding, and
printing an incorrect amount of memory needed to decompress.
This also renames filters_init_mask => filters_used_mask. A filter is
assumed to be used if it is specified in --filtersX until
coder_set_compression_settings() determines which filters are referenced
in --block-list.
|
|
When opt_block_size is not used, the Block size for mt encoder is
derived from the minimum of the largest Block specified by
--block-list and the recommended Block size on all filter chains
calculated by lzma_mt_block_size(). This avoids using unnecessary
memory and ensures that all Blocks are large enough for the most memory
needy filter chain.
|
|
|
|
Previously, only the default filter chain could have its memory usage
adjusted. The filter chains specified with --filtersX were not checked
for memory usage. Now, all used filter chains will be adjusted if
necessary.
|
|
The block splitting logic and split_block() function are not needed if
encoders are disabled. This will help slightly reduce the binary size
when built without encoders and allow split_block() to use functions
that require encoders being enabled.
|
|
This will only free filter chains created with --filters1-9 since the
default filter chain may be set from a static function variable. The
complexity to free the default filter chain is not worth the burden on
code maintenance.
|
|
--block-list is only supported with compression in xz format. This avoids
silently ignoring when --block-list is unused.
|
|
The new command line options are meant to be combined with --block-list.
They work as an optional extension to --block-list to specify a custom
filter chain for each block listed. The new options allow the creation
of up to 9 reusable filter chains. For instance:
xz --block-list=1:10MiB,3:5MiB,,2:5MiB,1:0 --filters1=delta--lzma2 \
--filters2=x86--lzma2 --filters3=arm64--lzma2
Will create the following blocks:
1. A block of size 10 MiB with filter chain delta, lzma2.
2. A block of size 5 MiB with filter chain arm64, lzma2.
3. A block of size 5 MiB with filter chain arm64, lzma2.
4. A block of size 5 MiB with filter chain x86, lzma2.
5. A block containing the rest of the file contents with filter chain
delta, lzma2.
|
|
This is a little cleaner than the previous implementation of
forget_filter_chain(). It is also more consistent since
lzma_str_to_filters() will always terminate the filter chain so there
is no need to terminate it later in coder_set_compression_settings().
|
|
Converting from string to filter will also need to be done for block
specific filter chains.
|
|
|
|
The --filters option uses the new lzma_str_to_filters() function
to convert a string into a full filter chain. Using this option
will reset all previous filters set by --preset, --[filter], or
--filters.
|
|
Commit 78704f36e74205857c898a351c757719a6c8b666 added an empty
initializer {} to prevent a warning. The empty initializer is a GNU
extension and results in a build failure on MSVC. The -wpedantic flag
warns about empty initializers.
|
|
This change only impacts the compiler warning since it was impossible
for the wait_abs struct in stream_encode_mt() to be used before it was
initialized since mythread_condtime_set() will always be called before
mythread_cond_timedwait().
Since the mythread.h code is different between the POSIX and
Windows versions, this warning was only present on Windows builds.
Thanks to Arthur S for reporting the warning and providing an initial
patch.
|
|
In lzma_memcmplen(), the <intrin.h> header file is only included if
_MSC_VER and _M_X64 are both defined but _BitScanForward64() was
previously used if _M_X64 was defined. GCC for MSYS2 defines _M_X64 but
not _MSC_VER so _BitScanForward64() was used without including
<intrin.h>.
Now, lzma_memcmplen() will use __builtin_ctzll() for MSYS2 GCC builds as
expected.
|
|
The ifunc method avoids indirection via the function pointer
crc64_func. This works on GNU/Linux and probably on FreeBSD too.
The previous __attribute((__constructor__)) method is kept for
compatibility with ELF platforms which do support ifunc.
The ifunc method has some limitations, for example, building
liblzma with -fsanitize=address will result in segfaults.
The configure option --disable-ifunc must be used for such builds.
Thanks to Hans Jansen for the original patch.
Closes: https://github.com/tukaani-project/xz/pull/53
|
|
Reword "options required" to "supported options". The previous may have
suggested that the options listed were all required anytime a filter is
used for encoding or decoding. The reword makes this more clear that
adjusting the options is optional.
|
|
None of the liblzma functions may throw an exception, so this
attribute should be applied to all liblzma API functions.
|
|
The lzma_mt_block_size() was previously just an internal function for
the multithreaded .xz encoder. It is used to provide a recommended Block
size for a given filter chain.
This function is helpful to determine the maximum Block size for the
multithreaded .xz encoder when one wants to change the filters between
blocks. Then, this determined Block size can be provided to
lzma_stream_encoder_mt() in the lzma_mt options parameter when
intializing the coder. This requires one to know all the filter chains
they are using before starting to encode (or at least the filter chain
that will need the largest Block size), but that isn't a bad limitation.
|
|
This creates an internal liblzma macro to test if the dictionary size
is valid for encoding.
|
|
Previous commit 6be460dde07113fe3f08f814b61ddc3264125a96 would cause an
error if the integer size was 32 bit.
|
|
|
|
Wrong line was changed in 7062348bf35c1e4cbfee00ad9fffb4a21aa6eff7.
Also, this has >= instead of == since ints larger than 32 bits would
work too even if not relevant in practice.
|
|
Legacy Windows did not need to #include <intrin.h> to use the MSVC
intrinsics. Newer versions likely just issue a warning, but the MSVC
documentation says to include the header file for the intrinsics we use.
GCC and Clang can "pretend" to be MSVC on Windows, so extra checks are
needed in tuklib_integer.h to only include <intrin.h> when it will is
actually needed.
|
|
Clang has support for __builtin_clz(), but previously Clang would
fallback to either the MSVC intrinsic or the regular C code. This was
discovered due to a bug where a new version of Clang required the
<intrin.h> header file in order to use the MSVC intrinsics.
Thanks to Anton Kochkov for notifying us about the bug.
|
|
AUTHORS was updated earlier, lzma.h was simply forgotten.
|
|
|
|
|
|
Thanks to Christian Hesse for reporting the issue.
Fixes: https://github.com/tukaani-project/xz/issues/44
|
|
The xz man page timestamp was intentionally left unchanged.
|
|
This was left in by mistake since an early version of the ARM64 filter
used a different struct for its options.
|
|
The \mainpage command is used in the first block of comments in lzma.h.
This changes the previously nearly empty index.html to use the first
comment block in lzma.h for its contents.
lzma.h is no longer documented separately, but this is for the better
since lzma.h only defined a few macros that users do not need to use.
The individual API header files all have a disclaimer that they should
not be #included directly, so there should be no confusion on the fact
that lzma.h should be the only header used by applications.
Additionally, the note "See ../lzma.h for information about liblzma as
a whole." was removed since lzma.h is now the main page of the
generated HTML and does not have its own page anymore. So it would be
confusing in the HTML version and was only a "nice to have" when
browsing the source files.
|
|
|
|
Also remove unneeded "sandbox_allowed = false;" as this code
will never be run more than once (making it work with multiple
input files isn't trivial).
|
|
|
|
The warning causes the exit status to be 2, so this will cause problems
for many scripted use cases for xz. The sandbox usage is already very
limited already, so silently disabling this allows it to be more usable.
|
|
Thanks to Xin Li for recommending the fix.
|
|
The warning is only used when errno == ENOSYS. Otherwise, xz still
issues a fatal error.
|
|
If a system has the Capsicum header files but does not actually
implement the system calls, then this would render xz unusable. Instead,
we can check if errno == ENOSYS and not issue a fatal error.
|
|
cap_enter() puts the process into the sandbox. If later calls to
cap_rights_limit() fail, then the process can still have some extra
protections.
|
|
lzma_lzma_preset() does not guarentee that the lzma_options_lzma are
usable in an encoder even if it returns false (success). If liblzma
is built with default configurations, then the options will always be
usable. However if the match finders hc3, hc4, or bt4 are disabled, then
the options may not be usable depending on the preset level requested.
The documentation was updated to reflect this complexity, since this
behavior was unclear before.
|
|
The '\n' renders as a newline when the comments are converted to html
by Doxygen.
|
|
Shorten the description for lzma_raw_encoder_memusage() and
lzma_raw_decoder_memusage().
|
|
|
|
All functions now explicitly specify parameter and return values.
The notes and code annotations were moved before the parameter and
return value descriptions for consistency.
Also, the description above lzma_filter_encoder_is_supported() about
not being able to list available filters was removed since
lzma_str_list_filters() will do this.
|
|
In the C99 and C17 standards, section 6.5.6 paragraph 8 means that
adding 0 to a null pointer is undefined behavior. As of writing,
"clang -fsanitize=undefined" (Clang 15) diagnoses this. However,
I'm not aware of any compiler that would take advantage of this
when optimizing (Clang 15 included). It's good to avoid this anyway
since compilers might some day infer that pointer arithmetic implies
that the pointer is not NULL. That is, the following foo() would then
unconditionally return 0, even for foo(NULL, 0):
void bar(char *a, char *b);
int foo(char *a, size_t n)
{
bar(a, a + n);
return a == NULL;
}
In contrast to C, C++ explicitly allows null pointer + 0. So if
the above is compiled as C++ then there is no undefined behavior
in the foo(NULL, 0) call.
To me it seems that changing the C standard would be the sane
thing to do (just add one sentence) as it would ensure that a huge
amount of old code won't break in the future. Based on web searches
it seems that a large number of codebases (where null pointer + 0
occurs) are being fixed instead to be future-proof in case compilers
will some day optimize based on it (like making the above foo(NULL, 0)
return 0) which in the worst case will cause security bugs.
Some projects don't plan to change it. For example, gnulib and thus
many GNU tools currently require that null pointer + 0 is defined:
https://lists.gnu.org/archive/html/bug-gnulib/2021-11/msg00000.html
https://www.gnu.org/software/gnulib/manual/html_node/Other-portability-assumptions.html
In XZ Utils null pointer + 0 issue should be fixed after this
commit. This adds a few if-statements and thus branches to avoid
null pointer + 0. These check for size > 0 instead of ptr != NULL
because this way bugs where size > 0 && ptr == NULL will likely
get caught quickly. None of them are in hot spots so it shouldn't
matter for performance.
A little less readable version would be replacing
ptr + offset
with
offset != 0 ? ptr + offset : ptr
or creating a macro for it:
#define my_ptr_add(ptr, offset) \
((offset) != 0 ? ((ptr) + (offset)) : (ptr))
Checking for offset != 0 instead of ptr != NULL allows GCC >= 8.1,
Clang >= 7, and Clang-based ICX to optimize it to the very same code
as ptr + offset. That is, it won't create a branch. So for hot code
this could be a good solution to avoid null pointer + 0. Unfortunately
other compilers like ICC 2021 or MSVC 19.33 (VS2022) will create a
branch from my_ptr_add().
Thanks to Marcin Kowalczyk for reporting the problem:
https://github.com/tukaani-project/xz/issues/36
|
|
|
|
|
|
|
|
lzma_microlzma_decoder -> lzma_microlzma_encoder
|
|
Standardizing each function to always specify parameters and return
values. Also moved the parameters and return values to the end of each
function description.
|
|
Use "member" to refer to struct members as that's the term used
by the C standard.
Use lzma_options_delta.dist and such in docs so that in Doxygen's
HTML output they will link to the doc of the struct member.
Clean up a few trailing white spaces too.
|
|
|
|
|
|
Also adjusted preset value => preset level.
|
|
It gives C4146 here since unary minus with unsigned integer
is still unsigned (which is the intention here). Doing it
with substraction makes it clearer and avoids the warning.
Thanks to Nathan Moinvaziri for reporting this.
|
|
Standardizing each function to always specify parameters and return
values. Also moved the parameters and return values to the end of each
function description.
A few small things were reworded and long sentences broken up.
|
|
All functions now explicitly specify parameter and return values.
|
|
All functions now explicitly specify parameter and return values.
Also moved the note about SHA-256 functions not being exported to the
top of the file.
|
|
All functions now explicitly specify parameter and return values.
|
|
|
|
Add \private above this field and its sub-fields since it is not meant
to be modified by users.
|
|
LZMA_MEMLIMIT_ERROR was missing the "<" character needed to put
documentation after a member.
|
|
Standardizing each function to always specify params and return values.
Also fixed a small grammar mistake.
|
|
|
|
Added [out] annotations to parameters that are pointers and can have
their value changed. Also added a clarification to lzma_vli_is_valid.
|
|
Document LZMA_DELTA_DIST_MIN and LZMA_DELTA_DIST_MAX for completeness
and to avoid Doxygen warnings.
|
|
All functions now explicitly specify parameter and return values.
Also reworded the description of lzma_index_hash_init() for readability.
|
|
start_time is relative to an arbitary point in time, it's not
time of day, so using it for anything else than time differences
wouldn't make sense.
|
|
|
|
Specified parameter and return values for API functions and documented
a few more of the macros.
|
|
The bug is only a problem in applications that do not properly terminate
the filters[] array with LZMA_VLI_UNKNOWN or have more than
LZMA_FILTERS_MAX filters. This bug does not affect xz.
|
|
|
|
Added a few sentences to the description for lzma_block_encoder() and
lzma_block_decoder() to highlight that the Block Header must be coded
before calling these functions.
|
|
|
|
|
|
|
|
|
|
Standardizing each function to always specify params and return values.
Output pointer parameters are also marked with doxygen style [out] to
make it clear. Any note sections were also moved above the parameter and
return sections for consistency.
|
