| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After testing a 32-bit Release build on MSVC, only lzma_crc64_clmul()
has the bug. crc_simd_body() and lzma_crc32_clmul() do not need the
optimizations disabled.
|
|
|
|
crc_common.h depends on common.h. The headers include common.h except
when there is a reason to not do so.
|
|
|
|
Forcing this to be inline has a significant speed improvement at the
cost of a few repeated instructions. The compilers tested on did not
inline this function since it is large and is used twice in the same
translation unit.
|
|
This macro must be used instead of the inline keyword. On MSVC, it is
a replacement for __forceinline which is an MSVC specific keyword that
should not be used with inline (it will issue a warning if it is).
It does not use a build system check to determine if
__attribute__((__always_inline__)) since all compilers that can use
CLMUL extensions (except the special case for MSVC) should support this
attribute. If this assumption is incorrect then it will result in a bug
report instead of silently producing slow code.
|
|
A detailed description of the three dispatch methods was added. Also,
duplicated comments now only appear in crc32_fast.c or were removed from
both crc32_fast.c and crc64_fast.c if they appeared in crc_clmul.c.
|
|
Both crc32_clmul() and crc64_clmul() are now exported from
crc32_clmul.c as lzma_crc32_clmul() and lzma_crc64_clmul(). This
ensures that is_clmul_supported() (now lzma_is_clmul_supported()) is
not duplicated between crc32_fast.c and crc64_fast.c.
Also, it encapsulates the complexity of the CLMUL implementations into a
single file and reduces the complexity of crc32_fast.c and crc64_fast.c.
Before, CLMUL code was present in crc32_fast.c, crc64_fast.c, and
crc_common.h.
During the conversion, various cleanups were applied to code (thanks to
Lasse Collin) including:
- Require using semicolons with MASK_/L/H/LH macros.
- Variable typing and const handling improvements.
- Improvements to comments.
- Fixes to the pragmas used.
- Removed unneeded variables.
- Whitespace improvements.
- Fixed CRC_USE_GENERIC_FOR_SMALL_INPUTS handling.
- Silenced warnings and removed the need for some #pragmas
|
|
When ifunc is supported, we can define a simpler macro instead of
repeating the more complex check in both crc32_fast.c and crc64_fast.c.
|
|
|
|
crc64_fast.c was updated to use the code from crc_common.h instead.
|
|
|
|
The C standards don't allow an empty translation unit which can be
avoided by declaring something, without exporting any symbols.
When I committed f644473a211394447824ea00518d0a214ff3f7f2 I had
a feeling that some specific toolchain somewhere didn't like
empty object files (assembler or maybe "ar" complained) but
I cannot find anything to confirm this now. Quite likely I
remembered nonsense. I leave this here as a note to my future self. :-)
|
|
When the generic fast crc64 method is used, then we omit
lzma_crc64_table[][]. Similar to
d9166b52cf3458a4da3eb92224837ca8fc208d79, we can avoid compiler warnings
with -Wempty-translation-unit (Clang) or -pedantic (GCC) by creating a
never used typedef instead of an extra symbol.
|
|
|
|
|
|
This was done for both internal and API headers.
|
|
|
|
|
|
Before this commit, the following writes "foo" to the
console and deletes the input file:
echo foo | xz > con_xz
xz --suffix=_xz --decompress con_xz
It cannot happen without --suffix because names like con.xz
are also special and so attempting to decompress con.xz
(or compress con to con.xz) will already fail when opening
the input file.
Similar thing is possible when compressing. The following
writes to "nul" and the input file "n" is deleted.
echo foo | xz > n
xz --suffix=ul n
Now xz checks if the destination is a special file before
continuing. DOS/DJGPP version had a check for this but
Windows (and OS/2) didn't.
|
|
This also drops the check for _WIN32 as that shouldn't be needed.
|
|
The API headers have many attributes but these were left
as is for now.
|
|
For compatibility with C23's [[noreturn]], tuklib_attr_noreturn
must be at the beginning of declaration (before "extern" or
"static", and even before any GNU C's __attribute__).
This commit also moves all other function attributes to
the beginning of function declarations. "extern" is kept
at the beginning of a line so the attributes are listed on
separate lines before "extern" or "static".
|
|
xrealloc() is obviously incorrect, modern GCC docs even
mention realloc() as an example where this attribute
cannot be used.
liblzma's lzma_alloc() and lzma_alloc_zero() would be
correct uses most of the time but custom allocators
may use a memory pool or otherwise hold the pointer
so aliasing issues could happen in theory.
The xstrdup() case likely was correct but I removed it anyway.
Now there are no __malloc__ attributes left in the code.
The allocations aren't in hot paths so this should make
no practical difference.
|
|
This makes no difference for GCC or Clang as they support
GNU C's __attribute__((__noreturn__)) but this helps with MSVC:
- VS 2019 version 16.7 and later support _Noreturn if the
options /std:c11 or /std:c17 are used. This gets handled
with the check for __STDC_VERSION__ >= 201112.
- When MSVC isn't in C11/C17 mode, __declspec(noreturn) is used.
C23 will deprecate _Noreturn (and <stdnoreturn.h>)
for [[noreturn]]. This commit anticipates that but
the final __STDC_VERSION__ value isn't known yet.
|
|
Thanks to Kelvin Lee for the original patches
and testing the modifications I made.
|
|
It's available since Windows Vista.
|
|
|
|
|
|
|
|
|
|
|
|
Thanks to Agostino Sarubbo.
Fixes: https://github.com/tukaani-project/xz/issues/62
|
|
Now the two variations of the format strings are created with
a macro, and the whole detection code can be easily disabled
on platforms where thousand separator formatting is known to
not work (MSVC has no support, and on DJGPP 2.05 it can have
problems in some cases).
|
|
SSIZE_MAX isn't readily available on MSVC. Removing it means
that there is one thing less to worry when porting to MSVC.
|
|
The argument to vli_ceil4() should always guarantee the return value
is also a valid lzma_vli. Thus the highest three valid lzma_vli values
are invalid arguments. All uses of the function ensure this so the
assert is updated to match this.
|
|
This was not a security bug since there was no path to overflow
UINT64_MAX in lzma_index_append() or when it calls index_file_size().
The bug was discovered by a failing assert() in vli_ceil4() when called
from index_file_size() when unpadded_sum (the sum of the compressed size
of current Stream and the unpadded_size parameter) exceeds LZMA_VLI_MAX.
Previously, the unpadded_size parameter was checked to be not greater
than UNPADDED_SIZE_MAX, but no check was done once compressed_base was
added.
This could not have caused an integer overflow in index_file_size() when
called by lzma_index_append(). The calculation for file_size breaks down
into the sum of:
- Compressed base from all previous Streams
- 2 * LZMA_STREAM_HEADER_SIZE (size of the current Streams header and
footer)
- stream_padding (can be set by lzma_index_stream_padding())
- Compressed base from the current Stream
- Unpadded size (parameter to lzma_index_append())
The sum of everything except for Unpadded size must be less than
LZMA_VLI_MAX. This is guarenteed by overflow checks in the functions
that can set these values including lzma_index_stream_padding(),
lzma_index_append(), and lzma_index_cat(). The maximum value for
Unpadded size is enforced by lzma_index_append() to be less than or
equal UNPADDED_SIZE_MAX. Thus, the sum cannot exceed UINT64_MAX since
LZMA_VLI_MAX is half of UINT64_MAX.
Thanks to Joona Kannisto for reporting this.
|
|
The "once_" variable was accidentally referred to as just "once". This
prevented building with Vista threads when
HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR was not defined.
|
|
|
|
signal.h in WASI SDK doesn't currently provide sigprocmask()
or sigset_t. liblzma doesn't need them so this change makes
liblzma and xzdec build against WASI SDK. xz doesn't build yet
and the tests don't either as tuktest needs setjmp() which
isn't (yet?) implemented in WASI SDK.
Closes: https://github.com/tukaani-project/xz/pull/57
See also: https://github.com/tukaani-project/xz/pull/56
(The original commit was edited a little by Lasse Collin.)
|
|
|
|
To workaround Automake lacking Windows resource compiler support, an
empty source file is compiled to overwrite the resource files for static
library builds. Translation units without an external declaration are
not allowed by the C standard and result in a warning when used with
-Wempty-translation-unit (Clang) or -pedantic (GCC).
|
|
Clang 16.0.0 and earlier have a bug that the ifunc resolver function
triggers the -Wunused-function warning. The resolver function is static
and only "used" by the __attribute__((__ifunc()__)).
At this time, the bug is still unresolved, but has been reported:
https://github.com/llvm/llvm-project/issues/63957
This is not a problem in GCC.
|
|
This further improves the documentation from commit
f36ca7982f6bd5e9827219ed4f3c5a1fbf5d7bdf. The previous wording of
"supported options" was slightly misleading since the options that are
printed are the ones that are relevant for encoding/decoding. It is not
about which options can or must be specified.
|
|
The comment used "flag" when referring to decoder options. Just
referring to them as options is more clear and consistent.
|
|
This string is used to print a filename when using "xz -v" and
stderr isn't a terminal.
|
|
|
|
Maybe ICC always #defines _MSC_VER on Windows but now
it's very clear which code will get used.
|
|
|
|
|
|
The Memory limit information section described three output
columns when it actually has six. This was reworded to
"multiple" to make it more future proof.
|
|
* Moved max_block_list_size from a global to local variable.
* Reworded error message in validate_block_list_filter().
* Removed helper function filter_chain_error().
* Changed 1 << X to 1U << X in many places
|
|
|
|
|
|
Changed will print => prints in xz --robot --version description to
match --robot --info-memory description.
|
|
The order is now consistent with the order the command line arguments
are documented earlier in the man page. The new order is:
1. --list
2. --info-memory
3. --version
Instead of the previous order:
1. --version
2. --info-memory
3. --list
|
|
|
|
The --filters-help can be used to help create filter chains with the
--filters and --filtersX options. The message in --long-help is too
short to fully explain the syntax to construct complex filter chains.
In --robot mode, xz will only print the output from liblzma function
lzma_str_list_filters.
|
|
The --block-list option description needed updating since the new
--filtersX option changes how it can be used. The new entry for
--filters1=FILTERS ... --filter9=FILTERS was created right after
the --filters option.
|
|
|
|
If a filter chain is set but not used in --block-list, it introduced
unexpected behavior such as requiring an unneeded amount of memory to
compress, reducing the number of threads in multi-threaded encoding, and
printing an incorrect amount of memory needed to decompress.
This also renames filters_init_mask => filters_used_mask. A filter is
assumed to be used if it is specified in --filtersX until
coder_set_compression_settings() determines which filters are referenced
in --block-list.
|
|
When opt_block_size is not used, the Block size for mt encoder is
derived from the minimum of the largest Block specified by
--block-list and the recommended Block size on all filter chains
calculated by lzma_mt_block_size(). This avoids using unnecessary
memory and ensures that all Blocks are large enough for the most memory
needy filter chain.
|
|
|
|
Previously, only the default filter chain could have its memory usage
adjusted. The filter chains specified with --filtersX were not checked
for memory usage. Now, all used filter chains will be adjusted if
necessary.
|
|
The block splitting logic and split_block() function are not needed if
encoders are disabled. This will help slightly reduce the binary size
when built without encoders and allow split_block() to use functions
that require encoders being enabled.
|
|
This will only free filter chains created with --filters1-9 since the
default filter chain may be set from a static function variable. The
complexity to free the default filter chain is not worth the burden on
code maintenance.
|
|
--block-list is only supported with compression in xz format. This avoids
silently ignoring when --block-list is unused.
|
|
The new command line options are meant to be combined with --block-list.
They work as an optional extension to --block-list to specify a custom
filter chain for each block listed. The new options allow the creation
of up to 9 reusable filter chains. For instance:
xz --block-list=1:10MiB,3:5MiB,,2:5MiB,1:0 --filters1=delta--lzma2 \
--filters2=x86--lzma2 --filters3=arm64--lzma2
Will create the following blocks:
1. A block of size 10 MiB with filter chain delta, lzma2.
2. A block of size 5 MiB with filter chain arm64, lzma2.
3. A block of size 5 MiB with filter chain arm64, lzma2.
4. A block of size 5 MiB with filter chain x86, lzma2.
5. A block containing the rest of the file contents with filter chain
delta, lzma2.
|
|
This is a little cleaner than the previous implementation of
forget_filter_chain(). It is also more consistent since
lzma_str_to_filters() will always terminate the filter chain so there
is no need to terminate it later in coder_set_compression_settings().
|
|
Converting from string to filter will also need to be done for block
specific filter chains.
|
|
|
|
The --filters option uses the new lzma_str_to_filters() function
to convert a string into a full filter chain. Using this option
will reset all previous filters set by --preset, --[filter], or
--filters.
|
|
Commit 78704f36e74205857c898a351c757719a6c8b666 added an empty
initializer {} to prevent a warning. The empty initializer is a GNU
extension and results in a build failure on MSVC. The -wpedantic flag
warns about empty initializers.
|
|
This change only impacts the compiler warning since it was impossible
for the wait_abs struct in stream_encode_mt() to be used before it was
initialized since mythread_condtime_set() will always be called before
mythread_cond_timedwait().
Since the mythread.h code is different between the POSIX and
Windows versions, this warning was only present on Windows builds.
Thanks to Arthur S for reporting the warning and providing an initial
patch.
|
|
In lzma_memcmplen(), the <intrin.h> header file is only included if
_MSC_VER and _M_X64 are both defined but _BitScanForward64() was
previously used if _M_X64 was defined. GCC for MSYS2 defines _M_X64 but
not _MSC_VER so _BitScanForward64() was used without including
<intrin.h>.
Now, lzma_memcmplen() will use __builtin_ctzll() for MSYS2 GCC builds as
expected.
|
|
The ifunc method avoids indirection via the function pointer
crc64_func. This works on GNU/Linux and probably on FreeBSD too.
The previous __attribute((__constructor__)) method is kept for
compatibility with ELF platforms which do support ifunc.
The ifunc method has some limitations, for example, building
liblzma with -fsanitize=address will result in segfaults.
The configure option --disable-ifunc must be used for such builds.
Thanks to Hans Jansen for the original patch.
Closes: https://github.com/tukaani-project/xz/pull/53
|
|
Reword "options required" to "supported options". The previous may have
suggested that the options listed were all required anytime a filter is
used for encoding or decoding. The reword makes this more clear that
adjusting the options is optional.
|
|
None of the liblzma functions may throw an exception, so this
attribute should be applied to all liblzma API functions.
|
|
The lzma_mt_block_size() was previously just an internal function for
the multithreaded .xz encoder. It is used to provide a recommended Block
size for a given filter chain.
This function is helpful to determine the maximum Block size for the
multithreaded .xz encoder when one wants to change the filters between
blocks. Then, this determined Block size can be provided to
lzma_stream_encoder_mt() in the lzma_mt options parameter when
intializing the coder. This requires one to know all the filter chains
they are using before starting to encode (or at least the filter chain
that will need the largest Block size), but that isn't a bad limitation.
|
|
This creates an internal liblzma macro to test if the dictionary size
is valid for encoding.
|
|
Previous commit 6be460dde07113fe3f08f814b61ddc3264125a96 would cause an
error if the integer size was 32 bit.
|
|
|
|
Wrong line was changed in 7062348bf35c1e4cbfee00ad9fffb4a21aa6eff7.
Also, this has >= instead of == since ints larger than 32 bits would
work too even if not relevant in practice.
|
|
Legacy Windows did not need to #include <intrin.h> to use the MSVC
intrinsics. Newer versions likely just issue a warning, but the MSVC
documentation says to include the header file for the intrinsics we use.
GCC and Clang can "pretend" to be MSVC on Windows, so extra checks are
needed in tuklib_integer.h to only include <intrin.h> when it will is
actually needed.
|
|
Clang has support for __builtin_clz(), but previously Clang would
fallback to either the MSVC intrinsic or the regular C code. This was
discovered due to a bug where a new version of Clang required the
<intrin.h> header file in order to use the MSVC intrinsics.
Thanks to Anton Kochkov for notifying us about the bug.
|
|
AUTHORS was updated earlier, lzma.h was simply forgotten.
|
|
|
|
|
|
Thanks to Christian Hesse for reporting the issue.
Fixes: https://github.com/tukaani-project/xz/issues/44
|
|
The xz man page timestamp was intentionally left unchanged.
|
|
This was left in by mistake since an early version of the ARM64 filter
used a different struct for its options.
|
|
The \mainpage command is used in the first block of comments in lzma.h.
This changes the previously nearly empty index.html to use the first
comment block in lzma.h for its contents.
lzma.h is no longer documented separately, but this is for the better
since lzma.h only defined a few macros that users do not need to use.
The individual API header files all have a disclaimer that they should
not be #included directly, so there should be no confusion on the fact
that lzma.h should be the only header used by applications.
Additionally, the note "See ../lzma.h for information about liblzma as
a whole." was removed since lzma.h is now the main page of the
generated HTML and does not have its own page anymore. So it would be
confusing in the HTML version and was only a "nice to have" when
browsing the source files.
|
|
|
|
Also remove unneeded "sandbox_allowed = false;" as this code
will never be run more than once (making it work with multiple
input files isn't trivial).
|
|
|
|
The warning causes the exit status to be 2, so this will cause problems
for many scripted use cases for xz. The sandbox usage is already very
limited already, so silently disabling this allows it to be more usable.
|
|
Thanks to Xin Li for recommending the fix.
|
|
The warning is only used when errno == ENOSYS. Otherwise, xz still
issues a fatal error.
|
|
If a system has the Capsicum header files but does not actually
implement the system calls, then this would render xz unusable. Instead,
we can check if errno == ENOSYS and not issue a fatal error.
|
|
cap_enter() puts the process into the sandbox. If later calls to
cap_rights_limit() fail, then the process can still have some extra
protections.
|
|
lzma_lzma_preset() does not guarentee that the lzma_options_lzma are
usable in an encoder even if it returns false (success). If liblzma
is built with default configurations, then the options will always be
usable. However if the match finders hc3, hc4, or bt4 are disabled, then
the options may not be usable depending on the preset level requested.
The documentation was updated to reflect this complexity, since this
behavior was unclear before.
|
|
The '\n' renders as a newline when the comments are converted to html
by Doxygen.
|
|
Shorten the description for lzma_raw_encoder_memusage() and
lzma_raw_decoder_memusage().
|
|
|
|
All functions now explicitly specify parameter and return values.
The notes and code annotations were moved before the parameter and
return value descriptions for consistency.
Also, the description above lzma_filter_encoder_is_supported() about
not being able to list available filters was removed since
lzma_str_list_filters() will do this.
|
|
In the C99 and C17 standards, section 6.5.6 paragraph 8 means that
adding 0 to a null pointer is undefined behavior. As of writing,
"clang -fsanitize=undefined" (Clang 15) diagnoses this. However,
I'm not aware of any compiler that would take advantage of this
when optimizing (Clang 15 included). It's good to avoid this anyway
since compilers might some day infer that pointer arithmetic implies
that the pointer is not NULL. That is, the following foo() would then
unconditionally return 0, even for foo(NULL, 0):
void bar(char *a, char *b);
int foo(char *a, size_t n)
{
bar(a, a + n);
return a == NULL;
}
In contrast to C, C++ explicitly allows null pointer + 0. So if
the above is compiled as C++ then there is no undefined behavior
in the foo(NULL, 0) call.
To me it seems that changing the C standard would be the sane
thing to do (just add one sentence) as it would ensure that a huge
amount of old code won't break in the future. Based on web searches
it seems that a large number of codebases (where null pointer + 0
occurs) are being fixed instead to be future-proof in case compilers
will some day optimize based on it (like making the above foo(NULL, 0)
return 0) which in the worst case will cause security bugs.
Some projects don't plan to change it. For example, gnulib and thus
many GNU tools currently require that null pointer + 0 is defined:
https://lists.gnu.org/archive/html/bug-gnulib/2021-11/msg00000.html
https://www.gnu.org/software/gnulib/manual/html_node/Other-portability-assumptions.html
In XZ Utils null pointer + 0 issue should be fixed after this
commit. This adds a few if-statements and thus branches to avoid
null pointer + 0. These check for size > 0 instead of ptr != NULL
because this way bugs where size > 0 && ptr == NULL will likely
get caught quickly. None of them are in hot spots so it shouldn't
matter for performance.
A little less readable version would be replacing
ptr + offset
with
offset != 0 ? ptr + offset : ptr
or creating a macro for it:
#define my_ptr_add(ptr, offset) \
((offset) != 0 ? ((ptr) + (offset)) : (ptr))
Checking for offset != 0 instead of ptr != NULL allows GCC >= 8.1,
Clang >= 7, and Clang-based ICX to optimize it to the very same code
as ptr + offset. That is, it won't create a branch. So for hot code
this could be a good solution to avoid null pointer + 0. Unfortunately
other compilers like ICC 2021 or MSVC 19.33 (VS2022) will create a
branch from my_ptr_add().
Thanks to Marcin Kowalczyk for reporting the problem:
https://github.com/tukaani-project/xz/issues/36
|
|
|
|
|
|
|
|
lzma_microlzma_decoder -> lzma_microlzma_encoder
|
|
Standardizing each function to always specify parameters and return
values. Also moved the parameters and return values to the end of each
function description.
|
|
Use "member" to refer to struct members as that's the term used
by the C standard.
Use lzma_options_delta.dist and such in docs so that in Doxygen's
HTML output they will link to the doc of the struct member.
Clean up a few trailing white spaces too.
|
|
|
|
|
|
Also adjusted preset value => preset level.
|
|
It gives C4146 here since unary minus with unsigned integer
is still unsigned (which is the intention here). Doing it
with substraction makes it clearer and avoids the warning.
Thanks to Nathan Moinvaziri for reporting this.
|
|
Standardizing each function to always specify parameters and return
values. Also moved the parameters and return values to the end of each
function description.
A few small things were reworded and long sentences broken up.
|
|
All functions now explicitly specify parameter and return values.
|
|
All functions now explicitly specify parameter and return values.
Also moved the note about SHA-256 functions not being exported to the
top of the file.
|
|
All functions now explicitly specify parameter and return values.
|
|
|
|
Add \private above this field and its sub-fields since it is not meant
to be modified by users.
|
|
LZMA_MEMLIMIT_ERROR was missing the "<" character needed to put
documentation after a member.
|
|
Standardizing each function to always specify params and return values.
Also fixed a small grammar mistake.
|
|
|
|
Added [out] annotations to parameters that are pointers and can have
their value changed. Also added a clarification to lzma_vli_is_valid.
|
|
Document LZMA_DELTA_DIST_MIN and LZMA_DELTA_DIST_MAX for completeness
and to avoid Doxygen warnings.
|
|
All functions now explicitly specify parameter and return values.
Also reworded the description of lzma_index_hash_init() for readability.
|
|
start_time is relative to an arbitary point in time, it's not
time of day, so using it for anything else than time differences
wouldn't make sense.
|
|
|
|
Specified parameter and return values for API functions and documented
a few more of the macros.
|
|
The bug is only a problem in applications that do not properly terminate
the filters[] array with LZMA_VLI_UNKNOWN or have more than
LZMA_FILTERS_MAX filters. This bug does not affect xz.
|
|
|
|
Added a few sentences to the description for lzma_block_encoder() and
lzma_block_decoder() to highlight that the Block Header must be coded
before calling these functions.
|
|
|
|
|
|
|
|
|
|
Standardizing each function to always specify params and return values.
Output pointer parameters are also marked with doxygen style [out] to
make it clear. Any note sections were also moved above the parameter and
return sections for consistency.
|
|
The flag description for LZMA_STR_NO_VALIDATION was previously confusing
about the treatment for filters than cannot be used with .xz format
(lzma1) without using LZMA_STR_ALL_FILTERS. Now, it is clear that
LZMA_STR_NO_VALIDATION is not a super set of LZMA_STR_ALL_FILTERS.
|
|
mythread.h and thus liblzma already does it.
|
|
This way, if xz is stopped the elapsed time and estimated time
remaining won't get confused by the amount of time spent in
the stopped state.
This raises SIGSTOP. It's not clear to me if this is the correct way.
POSIX and glibc docs say that SIGTSTP shouldn't stop the process if
it is orphaned but this commit doesn't attempt to handle that.
Search for SIGTSTP in section 2.4.3:
https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
|
|
Clang can be configured to fake a too high GCC version so
this way it's more robust.
|
|
The previous documentation for lzma_str_to_filters() was technically
correct, but misleading. lzma_str_to_filters() returns NULL on success,
which is in practice always defined to 0. This is the same value as
LZMA_OK, but lzma_str_to_filters() does not return lzma_ret so we should
be more clear.
|
|
This reverts commit 82e3c968bfa10e3ff13333bd9cbbadb5988d6766.
Macros in the reserved namespace (_foo or __foo) shouldn't be #defined
without a very good reason. Here the alternative would have been
to #define tuklib_has_warning(str) to an approriate value.
Also the tuklib_* files should stay namespace clean if possible.
|
|
__has_warning and other __has_foo macros are meant to become
compiler-agnostic so it's not good to check for __clang__ with it.
This also relied on tuklib_common.h for #defining __has_warning
which was confusing as #defining reserved macros is generally
not a good idea.
|
|
Also edit style to match the existing coding style in the project.
|
|
|
|
This prevents the reserved fields from being part of the generated
Doxygen documentation.
|
|
This improves the generated Doxygen HTML files to better highlight
how to properly use the liblzma API header files.
|
|
tuklib_physmem depends on GetProcAddress() for both MSVC and MinGW-w64
to retrieve a function address. The proper way to do this is to cast the
return value to the type of function pointer retrieved. Unfortunately,
this causes a cast-function-type warning, so the best solution is to
simply ignore the warning.
|
|
clang supports the __has_warning macro to determine if the version of
clang compiling the code supports a given warning. If we do not define
it for other compilers, it may cause a preprocessor error.
|
|
|
|
Calling coder_set_compression_settings() in list mode with verbose mode
on caused the filter chain and memory requirements to print. This was
unnecessary since the command results in an error and not consistent
with other formats like lzma and alone.
|
|
It makes no difference here as the return value fits into an int
too and it then gets ignored but this looks better.
|
|
|
|
It doesn't warn on a 64-bit system because truncating
a ptrdiff_t (signed long) to uint32_t is diagnosed under
-Wconversion by GCC and -Wshorten-64-to-32 by Clang.
|
|
|
|
This is similar to 2ce4f36f179a81d0c6e182a409f363df759d1ad0.
The actual initialization of the variables is done inside
mythread_sync() macro. Clang doesn't seem to see that
the initialization code inside the macro is always executed.
|
|
|
|
clang and gcc differ in how they handle -Wformat-nonliteral. gcc will
allow a non-literal format string as long as the function takes its
format arguments as a va_list.
|
|
This affects only 32-bit x86 builds. x86-64 is OK as is.
I still cannot easily test this myself. The reporter has tested
this and it passes the tests included in the CMake build and
performance is good: raw CRC64 is 2-3 times faster than the
C version of the slice-by-four method. (Note that liblzma doesn't
include a MSVC-compatible version of the 32-bit x86 assembly code
for the slice-by-four method.)
Thanks to Iouri Kharon for figuring out a fix, testing, and
benchmarking.
|
|
This reverts commit 36edc65ab4cf10a131f239acbd423b4510ba52d5.
It was reported that it wasn't a good enough fix and MSVC
still produced (different kind of) bad code when building
for 32-bit x86 if optimizations are enabled.
Thanks to Iouri Kharon.
|
|
On some platforms src/xz/suffix.c may need <strings.h> for
strcasecmp() but suffix.c includes the header when it needs it.
Unless there is an old system that otherwise supports enough C99
to build XZ Utils but doesn't have C89/C90-compatible <string.h>,
there should be no need to include <strings.h> in sysdefs.h.
|
|
SUSv2 and POSIX.1‐2017 declare only a few functions in <strings.h>.
Of these, strcasecmp() is used on some platforms in suffix.c.
Nothing else in the project needs <strings.h> (at least if
building on a modern system).
sysdefs.h currently includes <strings.h> if HAVE_STRINGS_H is
defined and suffix.c relied on this.
Note that dos/config.h doesn't #define HAVE_STRINGS_H even though
DJGPP does have strings.h. It isn't needed with DJGPP as strcasecmp()
is also in <string.h> in DJGPP.
|
|
|
|
It quite probably was never needed, that is, any system where memory.h
was required likely couldn't compile XZ Utils for other reasons anyway.
XZ Utils 5.2.6 and later source packages were generated using
Autoconf 2.71 which no longer defines HAVE_MEMORY_H. So the code
being removed is no longer used anyway.
|
|
I haven't tested with MSVC myself and there doesn't seem to be
information about the problem online, so I'm relying on the bug report.
Thanks to Iouri Kharon for the bug report and the patch.
|
|
Tuktest index hash
|
|
|
|
common/index.h is needed by liblzma internally and tests. common.h will
include and define many things that are not needed by the tests. Also,
this prevents include order problems because common.h will redefine
LZMA_API resulting in a warning.
|
|
5.5.0alpha won't be released, it's just to mark that
the branch is not for stable 5.4.x.
Once again there is no API/ABI stability for new features
in devel versions. The major soname won't be bumped even
if API/ABI of new features breaks between devel releases.
|
|
HAVE_DECL_PROGRAM_INVOCATION_NAME is renamed to
HAVE_PROGRAM_INVOCATION_NAME. Previously,
HAVE_DECL_PROGRAM_INVOCATION_NAME was always set when
building with autotools. CMake would only set this when it was 1, and the
dos/config.h did not define it. The new macro definition is consistent
across build systems.
|
|
This is for consistency with lzma_index_append.
|
|
|
|
Previously, mytime.c depended on mythread.h for <time.h> to be included.
|
|
Previously, <sys/time.h> was always included, even if mythread only used
clock_gettime. <time.h> is still needed even if clock_gettime is not used
though because struct timespec is needed for mythread_condtime.
|
|
Previously, if threading was enabled HAVE_DECL_CLOCK_MONOTONIC would always
be set to 0 or 1. However, this macro was needed in xz so if xz was not
built with threading and HAVE_DECL_CLOCK_MONOTONIC was not defined but
HAVE_CLOCK_GETTIME was, it caused a warning during build. Now,
HAVE_DECL_CLOCK_MONOTONIC has been renamed to HAVE_CLOCK_MONOTONIC and
will only be set if it is 1.
|
|
|
|
Using return_if_error on lzma_lzma_lclppb_encode was improper because
return_if_error is expecting an lzma_ret value, but
lzma_lzma_lclppb_encode returns a boolean. This could result in
lzma_microlzma_encoder, which would be misleading for applications.
|
|
|
|
|
|
|
|
|
|
|
|
The code that parses --memlimit options and --block-list modified
the argv[] when parsing the option string from optarg. This was
visible in "ps auxf" and such and could be confusing. I didn't
understand it back in the day when I wrote that code. Now a copy
is allocated when modifiable strings are needed.
|
|
The API docs gave an impression that such checks are done
but they actually weren't done. In practice it made little
difference since the calling code has a bug if these are NULL.
Thanks to Jia Tan for the original patch that checked for
block->filters == NULL.
|
|
This also sorts the symbol names alphabetically in liblzma_*.map.
|
|
If someone sets up Clang to define __GNUC__ to 10 or greater
then symvers broke. __has_attribute is supported by such GCC
and Clang versions that don't support __symver__ so this should
be much better and simpler way to detect if __symver__ is
actually supported.
Thanks to Tomasz Gajc for the bug report.
|
|
It has some complicated downsides and its usefulness is more limited
than I originally thought. So this change is bad for certain very
specific situations but a generic solution that works for other
filters (and is otherwise better too) is planned anyway. And this
way 7-Zip can use the same compatible filter for the .7z format.
This is still marked as experimental with a new temporary Filter ID.
|
|
|
|
|
|
Thanks to Jia Tan for the original patch.
|
|
This was forgotten from 7484744af6cbabe81e92af7d9e061dfd597fff7b.
|
|
|
|
Thanks to Jia Tan.
|
|
Two uses: Displaying encoder filter chain when compressing with -vv,
and displaying the decoder filter chain in --list -vv.
|
|
lzma_str_to_filters() uses static error messages which makes
them not very precise. It tells the position in the string
where an error occurred though which helps quite a bit if
applications take advantage of it. Dynamic error messages can
be added later with a new flag if it seems important enough.
|
|
|
|
|
