aboutsummaryrefslogtreecommitdiff
path: root/src (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24liblzma: Remove unneeded <sys/types.h> from fastpos_tablegen.c.Lasse Collin1-1/+0
This file only generates fastpos_table.c. It isn't built as a part of liblzma.
2020-02-22Use defined(__GNUC__) before __GNUC__ in preprocessor lines.Lasse Collin2-3/+5
This should silence the equivalent of -Wundef in compilers that don't define __GNUC__.
2020-02-21liblzma: Add more uses of lzma_memcmplen() to the normal mode of LZMA.Lasse Collin1-6/+10
This gives a tiny encoder speed improvement. This could have been done in 2014 after the commit 544aaa3d13554e8640f9caf7db717a96360ec0f6 but it was forgotten.
2020-02-21xz: Silence a warning when sig_atomic_t is long int.Lasse Collin1-1/+1
It can be true at least on z/OS.
2020-02-21xz: Avoid unneeded access of a volatile variable.Lasse Collin1-1/+1
2020-02-20tuklib_exit: Add missing header.Lasse Collin1-0/+1
strerror() needs <string.h> which happened to be included via tuklib_common.h -> tuklib_config.h -> sysdefs.h if HAVE_CONFIG_H was defined. This wasn't tested without config.h before so it had worked fine.
2020-02-18Revert the previous commit and add a comment.Lasse Collin1-7/+10
The previous commit broke crc32_tablegen.c. If the whole package is built without config.h (with defines set on the compiler command line) this should still work fine as long as these headers conform to C99 well enough.
2020-02-17Do not check for HAVE_CONFIG_H in tuklib_config.h.Lasse Collin1-8/+7
In XZ Utils sysdefs.h takes care of it and the required headers.
2020-02-16sysdefs.h: Omit the conditionals around string.h and limits.h.Lasse Collin1-6/+2
string.h is used unconditionally elsewhere in the project and configure has always stopped if limits.h is missing, so these headers must have been always available even on the weirdest systems.
2020-02-07Build: Add support for translated man pages using po4a.Lasse Collin3-42/+127
The dependency on po4a is optional. It's never required to install the translated man pages when xz is built from a release tarball. If po4a is missing when building from xz.git, the translated man pages won't be generated but otherwise the build will work normally. The translations are only updated automatically by autogen.sh and by "make mydist". This makes it easy to keep po4a as an optional dependency and ensures that I won't forget to put updated translations to a release tarball. The translated man pages aren't installed if --disable-nls is used. The installation of translated man pages abuses Automake internals by calling "install-man" with redefined dist_man_MANS and man_MANS. This makes the hairy script code slightly less hairy. If it breaks some day, this code needs to be fixed; don't blame Automake developers. Also, this adds more quotes to the existing shell script code in the Makefile.am "-hook"s.
2020-02-05xz: Make it a fatal error if enabling the sandbox fails.Lasse Collin1-1/+1
Perhaps it's too drastic but on the other hand it will let me learn about possible problems if people report the errors. This won't be backported to the v5.2 branch.
2020-02-05xz: Comment out annoying sandboxing messages.Lasse Collin1-3/+7
2020-02-01xz: Limit --memlimit-compress to at most 4020 MiB for 32-bit xz.Lasse Collin2-2/+51
See the code comment for reasoning. It's far from perfect but hopefully good enough for certain cases while hopefully doing nothing bad in other situations. At presets -5 ... -9, 4020 MiB vs. 4096 MiB makes no difference on how xz scales down the number of threads. The limit has to be a few MiB below 4096 MiB because otherwise things like "xz --lzma2=dict=500MiB" won't scale down the dict size enough and xz cannot allocate enough memory. With "ulimit -v $((4096 * 1024))" on x86-64, the limit in xz had to be no more than 4085 MiB. Some safety margin is good though. This is hack but it should be useful when running 32-bit xz on a 64-bit kernel that gives full 4 GiB address space to xz. Hopefully this is enough to solve this: https://bugzilla.redhat.com/show_bug.cgi?id=1196786 FreeBSD has a patch that limits the result in tuklib_physmem() to SIZE_MAX on 32-bit systems. While I think it's not the way to do it, the results on --memlimit-compress have been good. This commit should achieve practically identical results for compression while leaving decompression and tuklib_physmem() and thus lzma_physmem() unaffected.
2020-01-26xz: Set the --flush-timeout deadline when the first input byte arrives.Lasse Collin3-7/+6
xz --flush-timeout=2000, old version: 1. xz is started. The next flush will happen after two seconds. 2. No input for one second. 3. A burst of a few kilobytes of input. 4. No input for one second. 5. Two seconds have passed and flushing starts. The first second counted towards the flush-timeout even though there was no pending data. This can cause flushing to occur more often than needed. xz --flush-timeout=2000, after this commit: 1. xz is started. 2. No input for one second. 3. A burst of a few kilobytes of input. The next flush will happen after two seconds counted from the time when the first bytes of the burst were read. 4. No input for one second. 5. No input for another second. 6. Two seconds have passed and flushing starts.
2020-01-26xz: Move flush_needed from mytime.h to file_pair struct in file_io.h.Lasse Collin5-9/+7
2020-01-26xz: coder.c: Make writing output a separate function.Lasse Collin1-13/+17
The same code sequence repeats so it's nicer as a separate function. Note that in one case there was no test for opt_mode != MODE_TEST, but that was only because that condition would always be true, so this commit doesn't change the behavior there.
2020-01-26xz: Fix semi-busy-waiting in xz --flush-timeout.Lasse Collin3-4/+19
When input blocked, xz --flush-timeout=1 would wake up every millisecond and initiate flushing which would have nothing to flush and thus would just waste CPU time. The fix disables the timeout when no input has been seen since the previous flush.
2020-01-26xz: Refactor io_read() a bit.Lasse Collin1-9/+8
2020-01-26xz: Update a comment in file_io.h.Lasse Collin1-1/+4
2020-01-26xz: Move the setting of flush_needed in file_io.c to a nicer location.Lasse Collin1-4/+2
2019-12-31Rename unaligned_read32ne to read32ne, and similarly for the others.Lasse Collin13-57/+49
2019-12-31Rename read32ne to aligned_read32ne, and similarly for the others.Lasse Collin3-32/+32
Using the aligned methods requires more care to ensure that the address really is aligned, so it's nicer if the aligned methods are prefixed. The next commit will remove the unaligned_ prefix from the unaligned methods which in liblzma are used in more places than the aligned ones.
2019-12-31Revise tuklib_integer.h and .m4.Lasse Collin1-217/+271
Add a configure option --enable-unsafe-type-punning to get the old non-conforming memory access methods. It can be useful with old compilers or in some other less typical situations but shouldn't normally be used. Omit the packed struct trick for unaligned access. While it's best in some cases, this is simpler. If the memcpy trick doesn't work, one can request unsafe type punning from configure. Because CRC32/CRC64 code needs fast aligned reads, if no very safe way to do it is found, type punning is used as a fallback. This sucks but since it currently works in practice, it seems to be the least bad option. It's never needed with GCC >= 4.7 or Clang >= 3.6 since these support __builtin_assume_aligned and thus fast aligned access can be done with the memcpy trick. Other things: - Support GCC/Clang __builtin_bswapXX - Cleaner bswap fallback macros - Minor cleanups
2019-09-24Scripts: Put /usr/xpg4/bin to the beginning of PATH on Solaris.Lasse Collin4-0/+4
This adds a configure option --enable-path-for-scripts=PREFIX which defaults to empty except on Solaris it is /usr/xpg4/bin to make POSIX grep and others available. The Solaris case had been documented in INSTALL with a manual fix but it's better to do this automatically since it is needed on most Solaris systems anyway. Thanks to Daniel Richard G.
2019-07-12Fix comment typos in tuklib_mbstr* files.Lasse Collin3-3/+3
2019-07-12Add missing include to tuklib_mbstr_width.c.Lasse Collin1-0/+1
It didn't matter in XZ Utils because sysdefs.h includes string.h anyway.
2019-07-12Update tuklib base headers to include stdbool.h.Lasse Collin2-1/+2
2019-06-28xz: Automatically align the strings in --info-memory.Lasse Collin1-11/+34
This makes it easier to translate the strings. Also, the string for amount of RAM was shortened.
2019-06-25liblzma: Fix a buggy comment.Lasse Collin1-1/+1
2019-06-24liblzma: Add a comment.Lasse Collin1-1/+1
2019-06-24liblzma: Silence clang -Wmissing-variable-declarations.Lasse Collin2-0/+6
2019-06-24Add LZMA_RET_INTERNAL1..8 to lzma_ret and use one for LZMA_TIMED_OUT.Lasse Collin4-7/+25
LZMA_TIMED_OUT is *internally* used as a value for lzma_ret enumeration. Previously it was #defined to 32 and cast to lzma_ret. That way it wasn't visible in the public API, but this was hackish. Now the public API has eight LZMA_RET_INTERNALx members and LZMA_TIMED_OUT is #defined to LZMA_RET_INTERNAL1. This way the code is cleaner overall although the public API has a few extra mysterious enum members.
2019-06-24xz: Silence a warning from clang -Wsign-conversion in main.c.Lasse Collin1-1/+1
2019-06-24xz: Make "headings" static in list.c.Lasse Collin1-1/+1
Caught by clang -Wmissing-variable-declarations.
2019-06-24liblzma: Remove incorrect uses of lzma_attribute((__unused__)).Lasse Collin3-6/+3
Caught by clang -Wused-but-marked-unused.
2019-06-24xz: Fix an integer overflow with 32-bit off_t.Lasse Collin1-2/+9
Or any off_t which isn't very big (like signed 64 bit integer that most system have). A small off_t could overflow if the file being decompressed had long enough run of zero bytes, which would result in corrupt output.
2019-06-24xz: Cleanup io_seek_src() a bit.Lasse Collin1-3/+1
lseek() returns -1 on error and checking for -1 is nicer.
2019-06-24xz: Change io_seek_src and io_pread arguments from off_t to uint64_t.Lasse Collin3-11/+18
This helps fixing warnings from -Wsign-conversion and makes the code look better too.
2019-06-24xz: list.c: Fix some warnings from -Wsign-conversion.Lasse Collin1-3/+4
2019-06-23tuklib_mbstr_width: Fix a warning from -Wsign-conversion.Lasse Collin1-1/+1
2019-06-23xz: Fix some of the warnings from -Wsign-conversion.Lasse Collin7-13/+14
2019-06-23tuklib_cpucores: Silence warnings from -Wsign-conversion.Lasse Collin1-5/+5
2019-06-23xzdec: Fix warnings from -Wsign-conversion.Lasse Collin1-1/+1
2019-06-23liblzma: Fix warnings from -Wsign-conversion.Lasse Collin11-29/+31
Also, more parentheses were added to the literal_subcoder macro in lzma_comon.h (better style but no functional change in the current usage).
2019-06-23tuklib_integer: Silence warnings from -Wsign-conversion.Lasse Collin1-3/+3
2019-06-20tuklib_integer: Fix usage of conv macros.Lasse Collin1-4/+8
Use a temporary variable instead of e.g. conv32le(unaligned_read32ne(buf)) because the macro can evaluate its argument multiple times.
2019-06-03liblzma: Fix comments.Lasse Collin6-7/+7
Thanks to Bruce Stark.
2019-06-02liblzma: Fix one more unaligned read to use unaligned_read16ne().Lasse Collin1-1/+1
2019-06-01liblzma: memcmplen: Use ctz32() from tuklib_integer.h.Lasse Collin1-9/+1
The same compiler-specific #ifdefs are already in tuklib_integer.h
2019-06-01tuklib_integer: Cleanup MSVC-specific code.Lasse Collin1-11/+9
2019-06-01liblzma: Use unaligned_readXXne functions instead of type punning.Lasse Collin2-7/+7
Now gcc -fsanitize=undefined should be clean. Thanks to Jeffrey Walton.
2019-06-01tuklib_integer: Improve unaligned memory access.Lasse Collin1-12/+168
Now memcpy() or GNU C packed structs for unaligned access instead of type punning. See the comment in this commit for details. Avoiding type punning with unaligned access is needed to silence gcc -fsanitize=undefined. New functions: unaliged_readXXne and unaligned_writeXXne where XX is 16, 32, or 64.
2019-05-13liblzma: Avoid memcpy(NULL, foo, 0) because it is undefined behavior.Lasse Collin3-5/+23
I should have always known this but I didn't. Here is an example as a reminder to myself: int mycopy(void *dest, void *src, size_t n) { memcpy(dest, src, n); return dest == NULL; } In the example, a compiler may assume that dest != NULL because passing NULL to memcpy() would be undefined behavior. Testing with GCC 8.2.1, mycopy(NULL, NULL, 0) returns 1 with -O0 and -O1. With -O2 the return value is 0 because the compiler infers that dest cannot be NULL because it was already used with memcpy() and thus the test for NULL gets optimized out. In liblzma, if a null-pointer was passed to memcpy(), there were no checks for NULL *after* the memcpy() call, so I cautiously suspect that it shouldn't have caused bad behavior in practice, but it's hard to be sure, and the problematic cases had to be fixed anyway. Thanks to Jeffrey Walton.
2019-05-11xz: Update xz man page date.Lasse Collin1-1/+1
2019-05-11spellingAntoine Cœur18-22/+22
2019-05-01xz: In xz -lvv look at the widths of the check names too.Lasse Collin1-6/+26
Now the widths of the check names is used to adjust the width of the Check column. This way there no longer is a need to restrict the widths of the check names to be at most ten terminal-columns.
2019-05-01xz: Fix xz -lvv column alignment to look at the translated strings.Lasse Collin1-2/+2
2019-03-04xz: Automatically align column headings in xz -lvv.Lasse Collin1-51/+212
2019-03-04xz: Automatically align strings ending in a colon in --list output.Lasse Collin1-12/+102
This should avoid alignment errors in translations with these strings.
2018-12-20xz: Fix a crash in progress indicator when in passthru mode.Lasse Collin3-7/+25
"xz -dcfv not_an_xz_file" crashed (all four options are required to trigger it). It caused xz to call lzma_get_progress(&strm, ...) when no coder was initialized in strm. In this situation strm.internal is NULL which leads to a crash in lzma_get_progress(). The bug was introduced when xz started using lzma_get_progress() to get progress info for multi-threaded compression, so the bug is present in versions 5.1.3alpha and higher. Thanks to Filip Palian <Filip.Palian@pjwstk.edu.pl> for the bug report.
2018-11-22xz: Update man page timestamp.Lasse Collin1-1/+1
2018-11-22'have have' typosPavel Raiskup2-2/+2
2018-10-26liblzma: Don't verify header CRC32s if building for fuzz testing.Lasse Collin4-5/+20
FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION is #defined when liblzma is being built for fuzz testing. Most fuzzed inputs would normally get rejected because of incorrect CRC32 and the actual header decoding code wouldn't get fuzzed. Disabling CRC32 checks avoids this problem. The fuzzer program must still use LZMA_IGNORE_CHECK flag to disable verification of integrity checks of uncompressed data.
2018-07-27xzless: Rename unused variables to silence static analysers.Lasse Collin1-1/+1
In this particular case I don't see this affecting readability of the code. Thanks to Pavel Raiskup.
2018-07-27liblzma: Remove an always-true condition from lzma_index_cat().Lasse Collin1-2/+2
This should help static analysis tools to see that newg isn't leaked. Thanks to Pavel Raiskup.
2018-05-19liblzma: Improve lzma_properties_decode() API documentation.Lasse Collin1-3/+4
2018-04-29Bump the version number to 5.3.1alpha.larhzu/v5.3.1alphaLasse Collin2-2/+2
2018-02-06nothrow: use noexcept for C++11 and newerBen Boeckel1-1/+5
In C++11, the `throw()` specifier is deprecated and `noexcept` is preffered instead.
2018-02-06liblzma: Remove incorrect #ifdef from range_common.h.Lasse Collin1-3/+1
In most cases it was harmless but it could affect some custom build systems. Thanks to Pippijn van Steenhoven.
2018-01-10tuklib_integer: New Intel C compiler needs immintrin.h.Lasse Collin1-0/+11
Thanks to Melanie Blower (Intel) for the patch.
2017-08-14Fix or hide warnings from GCC 7's -Wimplicit-fallthrough.Lasse Collin2-0/+8
2017-05-23xz: Fix "xz --list --robot missing_or_bad_file.xz".Lasse Collin1-2/+6
It ended up printing an uninitialized char-array when trying to print the check names (column 7) on the "totals" line. This also changes the column 12 (minimum xz version) to 50000002 (xz 5.0.0) instead of 0 when there are no valid input files. Thanks to kidmin for the bug report.
2017-04-24xz: Use lzma_file_info_decoder() for --list.Lasse Collin1-210/+44
2017-04-24liblzma: Add lzma_file_info_decoder().Lasse Collin4-1/+928
2017-04-21liblzma: Rename LZMA_SEEK to LZMA_SEEK_NEEDED and seek_in to seek_pos.Lasse Collin3-11/+11
2017-04-19Update the home page URLs to HTTPS.Lasse Collin3-6/+6
2017-04-05xz: Add io_seek_src().Lasse Collin2-3/+30
2017-03-30xz: Use POSIX_FADV_RANDOM for in "xz --list" mode.Lasse Collin1-2/+8
xz --list is random access so POSIX_FADV_SEQUENTIAL was clearly wrong.
2017-03-30liblzma: Make lzma_index_decoder_init() visible to other liblzma funcs.Lasse Collin3-5/+30
This is to allow other functions to use it without going via the public API (lzma_index_decoder()).
2017-03-30liblzma: Add generic support for input seeking (LZMA_SEEK).Lasse Collin3-2/+42
Also mention LZMA_SEEK in xz/message.c to silence a warning.
2017-03-30liblzma: Fix lzma_memlimit_set(strm, 0).Lasse Collin3-3/+13
The 0 got treated specially in a buggy way and as a result the function did nothing. The API doc said that 0 was supposed to return LZMA_PROG_ERROR but it didn't. Now 0 is treated as if 1 had been specified. This is done because 0 is already used to indicate an error from lzma_memlimit_get() and lzma_memusage(). In addition, lzma_memlimit_set() no longer checks that the new limit is at least LZMA_MEMUSAGE_BASE. It's counter-productive for the Index decoder and was actually needed only by the auto decoder. Auto decoder has now been modified to check for LZMA_MEMUSAGE_BASE.
2017-03-30liblzma: Similar memlimit fix for stream_, alone_, and auto_decoder.Lasse Collin4-16/+20
2017-03-30liblzma: Fix handling of memlimit == 0 in lzma_index_decoder().Lasse Collin2-9/+13
It returned LZMA_PROG_ERROR, which was done to avoid zero as the limit (because it's a special value elsewhere), but using LZMA_PROG_ERROR is simply inconvenient and can cause bugs. The fix/workaround is to treat 0 as if it were 1 byte. It's effectively the same thing. The only weird consequence is that then lzma_memlimit_get() will return 1 even when 0 was specified as the limit. This fixes a very rare corner case in xz --list where a specific memory usage limit and a multi-stream file could print the error message "Internal error (bug)" instead of saying that the memory usage limit is too low.
2016-11-21liblzma: Avoid multiple definitions of lzma_coder structures.Lasse Collin35-423/+532
Only one definition was visible in a translation unit. It avoided a few casts and temp variables but seems that this hack doesn't work with link-time optimizations in compilers as it's not C99/C11 compliant. Fixes: http://www.mail-archive.com/xz-devel@tukaani.org/msg00279.html
2016-10-24tuklib_cpucores: Add support for sched_getaffinity().Lasse Collin1-0/+9
It's available in glibc (GNU/Linux, GNU/kFreeBSD). It's better than sysconf(_SC_NPROCESSORS_ONLN) because sched_getaffinity() gives the number of cores available to the process instead of the total number of cores online. As a side effect, this commit fixes a bug on GNU/kFreeBSD where configure would detect the FreeBSD-specific cpuset_getaffinity() but it wouldn't actually work because on GNU/kFreeBSD it requires using -lfreebsd-glue when linking. Now the glibc-specific function will be used instead. Thanks to Sebastian Andrzej Siewior for the original patch and testing.
2016-06-30xz: Fix copying of timestamps on Windows.Lasse Collin1-0/+18
xz used to call utime() on Windows, but its result gets lost on close(). Using _futime() seems to work. Thanks to Martok for reporting the bug: http://www.mail-archive.com/xz-devel@tukaani.org/msg00261.html
2016-06-16xz: Silence warnings from -Wlogical-op.Lasse Collin1-2/+10
Thanks to Evan Nemerson.
2016-04-10Build: Fix = to += for xz_SOURCES in src/xz/Makefile.am.Lasse Collin1-1/+1
Thanks to Christian Kujau.
2016-03-13liblzma: Disable external SHA-256 by default.Lasse Collin1-10/+6
This is the sane thing to do. The conflict with OpenSSL on some OSes and especially that the OS-provided versions can be significantly slower makes it clear that it was a mistake to have the external SHA-256 support enabled by default. Those who want it can now pass --enable-external-sha256 to configure. INSTALL was updated with notes about OSes where this can be a bad idea. The SHA-256 detection code in configure.ac had some bugs that could lead to a build failure in some situations. These were fixed, although it doesn't matter that much now that the external SHA-256 is disabled by default. MINIX >= 3.2.0 uses NetBSD's libc and thus has SHA256_Init in libc instead of libutil. Support for the libutil version was removed.
2015-11-08tuklib_physmem: Hopefully silence a warning on Windows.Lasse Collin1-1/+2
2015-11-04liblzma: Make Valgrind happier with optimized (gcc -O2) liblzma.Lasse Collin1-0/+4
When optimizing, GCC can reorder code so that an uninitialized value gets used in a comparison, which makes Valgrind unhappy. It doesn't happen when compiled with -O0, which I tend to use when running Valgrind. Thanks to Rich Prohaska. I remember this being mentioned long ago by someone else but nothing was done back then.
2015-11-03liblzma: Rename lzma_presets.c back to lzma_encoder_presets.c.Lasse Collin2-2/+2
It would be too annoying to update other build systems just because of this.
2015-11-03xz: Make xz buildable even when encoders or decoders are disabled.Lasse Collin5-13/+58
The patch is quite long but it's mostly about adding new #ifdefs to omit code when encoders or decoders have been disabled. This adds two new #defines to config.h: HAVE_ENCODERS and HAVE_DECODERS.
2015-11-03Build: Build LZMA1/2 presets also when only decoder is wanted.Lasse Collin2-2/+7
People shouldn't rely on the presets when decoding raw streams, but xz uses the presets as the starting point for raw decoder options anyway. lzma_encocder_presets.c was renamed to lzma_presets.c to make it clear it's not used solely by the encoder code.
2015-11-03Build: Don't omit lzma_cputhreads() unless using --disable-threads.Lasse Collin1-1/+4
Previously it was omitted if encoders were disabled with --disable-encoders. It didn't make sense and it also broke the build.
2015-11-02liblzma: Fix a build failure related to external SHA-256 support.Lasse Collin1-9/+23
If an appropriate header and structure were found by configure, but a library with a usable SHA-256 functions wasn't, the build failed.
2015-11-02xz: Always close the file before trying to delete it.Lasse Collin1-13/+12
unlink() can return EBUSY in errno for open files on some operating systems and file systems.
2015-10-12liblzma: Fix lzma_index_dup() for empty Streams.Lasse Collin1-5/+6
Stream Flags and Stream Padding weren't copied from empty Streams.
2015-10-12liblzma: Add a note to index.c for those using static analyzers.Lasse Collin1-0/+3
2015-10-12liblzma: Fix a memory leak in error path of lzma_index_dup().Lasse Collin1-9/+9
lzma_index_dup() calls index_dup_stream() which, in case of an error, calls index_stream_end() to free memory allocated by index_stream_init(). However, it illogically didn't actually free the memory. To make it logical, the tree handling code was modified a bit in addition to changing index_stream_end(). Thanks to Evan Nemerson for the bug report.
2015-07-12liblzma: A MSVC-specific hack isn't needed with MSVC 2013 and newer.Lasse Collin1-5/+13
2015-05-11xz: Document that threaded decompression hasn't been implemented yet.Lasse Collin1-1/+9
2015-04-20Revert "xz: Use pipe2() if available."Lasse Collin1-8/+1
This reverts commit 7a11c4a8e5e15f13d5fa59233b3172e65428efdd. It is a problem when libc has pipe2() but the kernel is too old to have pipe2() and thus pipe2() fails. In xz it's pointless to have a fallback for non-functioning pipe2(); it's better to avoid pipe2() completely. Thanks to Michael Fox for the bug report.
2015-04-01xz: Fix the Capsicum rights on user_abort_pipe.Lasse Collin1-1/+5
2015-03-31xz: Add support for sandboxing with Capsicum.Lasse Collin5-1/+110
The sandboxing is used conditionally as described in main.c. This isn't optimal but it was much easier to implement than a full sandboxing solution and it still covers the most common use cases where xz is writing to standard output. This should have practically no effect on performance even with small files as fork() isn't needed. C and locale libraries can open files as needed. This has been fine in the past, but it's a problem with things like Capsicum. io_sandbox_enter() tries to ensure that various locale-related files have been loaded before cap_enter() is called, but it's possible that there are other similar problems which haven't been seen yet. Currently Capsicum is available on FreeBSD 10 and later and there is a port to Linux too. Thanks to Loganaden Velvindron for help.
2015-03-30Bump version to 5.3.0alpha and soname to 5.3.99.Lasse Collin2-4/+4
The idea of 99 is that it looks a bit weird in this context. For new features there's no API/ABI stability in devel versions.
2015-03-29Fix the detection of installed RAM on QNX.Lasse Collin1-1/+13
The earlier version compiled but didn't actually work since sysconf(_SC_PHYS_PAGES) always fails (or so I was told). Thanks to Ole André Vadla Ravnås for the patch and testing.
2015-03-07xz: size_t/uint32_t cleanup in options.c.Lasse Collin1-6/+6
2015-03-07xz: Fix a comment and silence a warning in message.c.Lasse Collin1-2/+3
2015-03-07liblzma: Silence more uint32_t vs. size_t warnings.Lasse Collin2-2/+2
2015-03-07xz: Make arg_count an unsigned int to silence a warning.Lasse Collin2-2/+2
Actually the value of arg_count cannot exceed INT_MAX but it's nicer as an unsigned int.
2015-03-07liblzma: Fix a warning in index.c.Lasse Collin1-1/+3
2015-02-26Bump version and soname for 5.2.1.larhzu/v5.2.1Lasse Collin2-2/+2
2015-02-22xz: Use pipe2() if available.Lasse Collin1-1/+8
2015-02-21liblzma: Fix a compression-ratio regression in LZMA1/2 in fast mode.Lasse Collin1-1/+1
The bug was added in the commit f48fce093b07aeda95c18850f5e086d9f2383380 and thus affected 5.1.4beta and 5.2.0. Luckily the bug cannot cause data corruption or other nasty things.
2015-02-21xz: Fix the fcntl() usage when creating a pipe for the self-pipe trick.Lasse Collin1-5/+11
Now it reads the old flags instead of blindly setting O_NONBLOCK. The old code may have worked correctly, but this is better.
2015-02-10tuklib_cpucores: Use cpuset_getaffinity() on FreeBSD if available.Lasse Collin1-0/+18
In FreeBSD, cpuset_getaffinity() is the preferred way to get the number of available cores. Thanks to Rui Paulo for the patch. I edited it slightly, but hopefully I didn't break anything.
2015-02-09xzdiff: Make the mktemp usage compatible with FreeBSD's mktemp.Lasse Collin1-1/+6
Thanks to Rui Paulo for the fix.
2015-02-03Add a few casts to tuklib_integer.h to silence possible warnings.Lasse Collin1-12/+12
I heard that Visual Studio 2013 gave warnings without the casts. Thanks to Gabi Davar.
2015-01-26liblzma: Set LZMA_MEMCMPLEN_EXTRA depending on the compare method.Lasse Collin1-5/+10
2015-01-26liblzma: Silence harmless Valgrind errors.Lasse Collin1-0/+6
Thanks to Torsten Rupp for reporting this. I had forgotten to run Valgrind before the 5.2.0 release.
2015-01-09xz: Fix comments.Lasse Collin1-4/+8
2015-01-09xz: Don't fail if stdout doesn't support O_NONBLOCK.Lasse Collin1-21/+15
This is similar to the case with stdin. Thanks to Brad Smith for the bug report and testing on OpenBSD.
2015-01-07xz: Fix a memory leak in DOS-specific code.Lasse Collin1-0/+2
2015-01-07xz: Don't fail if stdin doesn't support O_NONBLOCK.Lasse Collin1-11/+7
It's a problem at least on OpenBSD which doesn't support O_NONBLOCK on e.g. /dev/null. I'm not surprised if it's a problem on other OSes too since this behavior is allowed in POSIX-1.2008. The code relying on this behavior was committed in June 2013 and included in 5.1.3alpha released on 2013-10-26. Clearly the development releases only get limited testing.
2014-12-21Bump version and soname for 5.2.0.Lasse Collin3-5/+5
I know that soname != app version, but I skip AGE=1 in -version-info to make the soname match the liblzma version anyway. It doesn't hurt anything as long as it doesn't conflict with library versioning rules.
2014-12-21Fix build when --disable-threads is used.Lasse Collin1-0/+2
2014-12-21xz: Fix a comment.Lasse Collin1-2/+2
2014-12-16xz: Update the man page about --threads.Lasse Collin1-5/+0
2014-12-16xz: Update the man page about --block-size.Lasse Collin1-8/+33
2014-12-02liblzma: Document how lzma_mt.block_size affects memory usage.Lasse Collin1-0/+4
2014-11-26Remove LZMA_UNSTABLE macro.Lasse Collin3-7/+0
2014-11-26liblzma: Update lzma_stream_encoder_mt() API docs.Lasse Collin1-2/+3
2014-11-25liblzma: Verify the filter chain in threaded encoder initialization.Lasse Collin1-3/+6
This way an invalid filter chain is detected at the Stream encoder initialization instead of delaying it to the first call to lzma_code() which triggers the initialization of the actual filter encoder(s).
2014-11-10xzdiff: Use mkdir if mktemp isn't available.Lasse Collin1-1/+16
2014-11-10xzdiff: Create a temporary directory to hold a temporary file.Lasse Collin1-5/+5
This avoids the possibility of "File name too long" when creating a temp file when the input file name is very long. This also means that other users on the system can no longer see the input file names in /tmp (or whatever $TMPDIR is) since the temporary directory will have a generic name. This usually doesn't matter since on many systems one can see the arguments given to all processes anyway. The number X chars to mktemp where increased from 6 to 10. Note that with some shells temp files or dirs won't be used at all.
2014-11-10liblzma: Fix lzma_mt.preset in lzma_stream_encoder_mt_memusage().Lasse Collin1-2/+1
It read the filter chain from a wrong variable. This is a similar bug that was fixed in 9494fb6d0ff41c585326f00aa8f7fe58f8106a5e.
2014-10-29Build: Prepare to support Automake's subdir-objects.Lasse Collin5-14/+34
Due to a bug in Automake, subdir-objects won't be enabled for now. http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354 Thanks to Daniel Richard G. for the original patches.
2014-10-09Add support for AmigaOS/AROS to tuklib_physmem().Lasse Collin1-0/+7
Thanks to Fredrik Wikstrom.
2014-10-09xzgrep: Avoid passing both -q and -l to grep.Lasse Collin1-2/+4
The behavior of grep -ql varies: - GNU grep behaves like grep -q. - OpenBSD grep behaves like grep -l. POSIX doesn't make it 100 % clear what behavior is expected. Anyway, using both -q and -l at the same time makes no sense so both options simply should never be used at the same time. Thanks to Christian Weisgerber.
2014-09-20liblzma: Fix a portability problem in Makefile.am.Lasse Collin1-1/+1
POSIX supports $< only in inference rules (suffix rules). Using it elsewhere is a GNU make extension and doesn't work e.g. with OpenBSD make. Thanks to Christian Weisgerber for the patch.
2014-09-14Bump the version number to 5.1.4beta.larhzu/v5.1.4betaLasse Collin2-3/+3
2014-08-05xz: Add --ignore-check.Lasse Collin5-1/+38
2014-08-05liblzma: Add support for LZMA_IGNORE_CHECK.Lasse Collin3-2/+37
2014-08-05liblzma: Add support for lzma_block.ignore_check.Lasse Collin7-20/+68
Note that this slightly changes how lzma_block_header_decode() has been documented. Earlier it said that the .version is set to the lowest required value, but now it says that the .version field is kept unchanged if possible. In practice this doesn't affect any old code, because before this commit the only possible .version was 0.
2014-08-04liblzma: Use lzma_memcmplen() in the BT3 match finder.Lasse Collin1-3/+2
I had missed this when writing the commit 5db75054e900fa06ef5ade5f2c21dffdd5d16141. Thanks to Jun I Jin.
2014-08-03liblzma: SHA-256: Optimize the Maj macro slightly.Lasse Collin1-1/+1
The Maj macro is used where multiple things are added together, so making Maj a sum of two expressions allows some extra freedom for the compiler to schedule the instructions. I learned this trick from <http://www.hackersdelight.org/corres.txt>.
2014-08-03liblzma: SHA-256: Optimize the way rotations are done.Lasse Collin1-6/+11
This looks weird because the rotations become sequential, but it helps quite a bit on both 32-bit and 64-bit x86: - It requires fewer instructions on two-operand instruction sets like x86. - It requires one register less which matters especially on 32-bit x86. I hope this doesn't hurt other archs. I didn't invent this idea myself, but I don't remember where I saw it first.
2014-08-03liblzma: SHA-256: Remove the GCC #pragma that became unneeded.Lasse Collin1-5/+0
The unrolling in the previous commit should avoid the situation where a compiler may think that an uninitialized variable might be accessed.
2014-08-03liblzma: SHA-256: Unroll a little more.Lasse Collin1-9/+16
This way a branch isn't needed for each operation to choose between blk0 and blk2, and still the code doesn't grow as much as it would with full unrolling.
2014-08-03liblzma: SHA-256: Do the byteswapping without a temporary buffer.Lasse Collin1-12/+1
2014-07-25liblzma: Use lzma_memcmplen() in normal mode of LZMA.Lasse Collin1-15/+5
Two locations were not changed yet because the simplest change assumes that the initial "len" may be greater than "limit".
2014-07-25liblzma: Simplify LZMA fast mode code by using memcmp().Lasse Collin1-10/+1
2014-07-25liblzma: Use lzma_memcmplen() in fast mode of LZMA.Lasse Collin1-3/+3
2014-07-25liblzma: Use lzma_memcmplen() in the match finders.Lasse Collin2-23/+23
This doesn't change the match finder output.
2014-07-25liblzma: Add lzma_memcmplen() for fast memory comparison.Lasse Collin2-0/+171
This commit just adds the function. Its uses will be in separate commits. This hasn't been tested much yet and it's perhaps a bit early to commit it but if there are bugs they should get found quite quickly. Thanks to Jun I Jin from Intel for help and for pointing out that string comparison needs to be optimized in liblzma.
2014-06-29xz: Update the help message of a few options.Lasse Collin1-7/+11
Updated: --threads, --block-size, and --block-list Added: --flush-timeout
2014-06-18xz: Use lzma_cputhreads() instead of own copy of tuklib_cpucores().Lasse Collin2-4/+9
2014-06-18liblzma: Add lzma_cputhreads().Lasse Collin5-1/+45
2014-06-18xz: Check for filter chain compatibility for --flush-timeout.Lasse Collin1-9/+21
This avoids LZMA_PROG_ERROR from lzma_code() with filter chains that don't support LZMA_SYNC_FLUSH.
2014-06-11xzgrep: exit 0 when at least one file matches.Lasse Collin1-2/+13
Mimic the original grep behavior and return exit_success when at least one xz compressed file matches given pattern. Original bugreport: https://bugzilla.redhat.com/show_bug.cgi?id=1108085 Thanks to Pavel Raiskup for the patch.
2014-06-09xz: Force single-threaded mode when --flush-timeout is used.Lasse Collin1-0/+11
2014-05-25liblzma: Use lzma_alloc_zero() in LZ encoder initialization.Lasse Collin3-55/+62
This avoids a memzero() call for a newly-allocated memory, which can be expensive when encoding small streams with an over-sized dictionary. To avoid using lzma_alloc_zero() for memory that doesn't need to be zeroed, lzma_mf.son is now allocated separately, which requires handling it separately in normalize() too. Thanks to Vincenzo Innocente for reporting the problem.
2014-05-25liblzma: Add the internal function lzma_alloc_zero().Lasse Collin2-0/+27
2014-05-08xz: Fix uint64_t vs. size_t which broke 32-bit build.Lasse Collin1-1/+1
Thanks to Christian Hesse.
2014-05-04liblzma: Rename the private API header lzma/lzma.h to lzma/lzma12.h.Lasse Collin3-3/+3
It can be confusing that two header files have the same name. The public API file is still lzma.h.
2014-04-25Build: Fix the combination of --disable-xzdec --enable-lzmadec.Lasse Collin1-1/+9
In this case "make install" could fail if the man page directory didn't already exist at the destination. If it did exist, a dangling symlink was created there. Now the link is omitted instead. This isn't the best fix but it's better than the old behavior.
2014-04-09xz: Rename a variable to avoid a namespace collision on Solaris.Lasse Collin1-5/+7
I don't know the details but I have an impression that there's no problem in practice if using GCC since people have built xz with GCC (without patching xz), but renaming the variable cannot hurt either. Thanks to Mark Ashley.
2014-01-29liblzma: Fix lzma_mt.preset not working with lzma_stream_encoder_mt().Lasse Collin1-2/+2
It read the filter chain from a wrong variable.
2014-01-20liblzma: Fix typo in a comment.Lasse Collin1-1/+1
2014-01-12xz: Fix a comment.Lasse Collin1-2/+2
2014-01-12Windows: Add MSVC defines for inline and restrict keywords.Lasse Collin1-0/+10
2014-01-12liblzma: Avoid C99 compound literal arrays.Lasse Collin1-3/+5
MSVC 2013 doesn't like them. Maybe they aren't so good for readability either since many aren't used to them.
2014-01-12liblzma: Remove a useless C99ism from sha256.c.Lasse Collin1-1/+1
Unsurprisingly it makes no difference in compiled output.
2014-01-12xz: Fix use of wrong variable.Lasse Collin1-1/+1
Since the only call to suffix_set() uses optarg as the argument, fixing this bug doesn't change the behavior of the program.
2014-01-12Fix typos in comments.Lasse Collin2-2/+2
2013-11-26liblzma: Document the need for block->check for lzma_block_header_decode().Lasse Collin1-0/+3
Thanks to Tomer Chachamu.
2013-11-12xz: Update the man page about --block-size and --block-list.Lasse Collin1-9/+15
2013-11-12xz: Make --block-list and --block-size work together in single-threaded.Lasse Collin1-15/+75
Previously, --block-list and --block-size only worked together in threaded mode. Boundaries are specified by --block-list, but --block-size specifies the maximum size for a Block. Now this works in single-threaded mode too. Thanks to James M Leddy for the original patch.
2013-10-26Bump the version number to 5.1.3alpha.larhzu/v5.1.3alphaLasse Collin2-2/+2
2013-10-25xz: Document behavior of --block-list with threads.Lasse Collin1-3/+21
This needs to be updated before 5.2.0.
2013-10-22xz: Document --flush-timeout=TIMEOUT on the man page.Lasse Collin1-1/+36
2013-10-22xz: Take advantage of LZMA_FULL_BARRIER with --block-list.Lasse Collin1-17/+15
Now if --block-list is used in threaded mode, the encoder won't need to flush at each Block boundary specified via --block-list. This improves performance a lot, making threading helpful with --block-list. The flush timer was reset after LZMA_FULL_FLUSH but since LZMA_FULL_BARRIER doesn't flush, resetting the timer is no longer done.
2013-10-02liblzma: Support LZMA_FULL_FLUSH and _BARRIER in threaded encoder.Lasse Collin1-16/+39
Now --block-list=SIZES works with in the threaded mode too, although the performance is still bad due to the use of LZMA_FULL_FLUSH instead of the new LZMA_FULL_BARRIER.
2013-10-02liblzma: Add LZMA_FULL_BARRIER support to single-threaded encoder.Lasse Collin4-11/+54
In the single-threaded encoder LZMA_FULL_BARRIER is simply an alias for LZMA_FULL_FLUSH.
2013-09-17liblzma: Add block_buffer_encoder.h into Makefile.inc.Lasse Collin1-0/+1
This should have been in b465da5988dd59ad98fda10c2e4ea13d0b9c73bc.
2013-09-17xz: Add a missing test for TUKLIB_DOSLIKE.Lasse Collin1-0/+2
2013-09-17Add native threading support on Windows.Lasse Collin3-162/+442
Now liblzma only uses "mythread" functions and types which are defined in mythread.h matching the desired threading method. Before Windows Vista, there is no direct equivalent to pthread condition variables. Since this package doesn't use pthread_cond_broadcast(), pre-Vista threading can still be kept quite simple. The pre-Vista code doesn't use anything that wasn't already available in Windows 95, so the binaries should run even on Windows 95 if someone happens to care.
2013-09-09Build: Create liblzma.pc in a src/liblzma/Makefile.am.Lasse Collin1-0/+20
Previously it was done in configure, but doing that goes against the Autoconf manual. Autoconf requires that it is possible to override e.g. prefix after running configure and that doesn't work correctly if liblzma.pc is created by configure. A potential downside of this change is that now e.g. libdir in liblzma.pc is a standalone string instead of being defined via ${prefix}, so if one overrides prefix when running pkg-config the libdir won't get the new value. I don't know if this matters in practice. Thanks to Vincent Torri.
2013-08-04Fix the previous commit which broke the build.Lasse Collin1-1/+1
Apparently I didn't even compile-test the previous commit. Thanks to Christian Hesse.
2013-08-03Windows: Add Windows support to tuklib_cpucores().Lasse Collin1-1/+12
It is used for Cygwin too. I'm not sure if that is a good or bad idea. Thanks to Vincent Torri.
2013-07-04xz: Add preliminary support for --flush-timeout=TIMEOUT.Lasse Collin3-21/+78
When --flush-timeout=TIMEOUT is used, xz will use LZMA_SYNC_FLUSH if read() would block and at least TIMEOUT milliseconds has elapsed since the previous flush. This can be useful in realtime-like use cases where the data is simultanously decompressed by another process (possibly on a different computer). If new uncompressed input data is produced slowly, without this option xz could buffer the data for a long time until it would become decompressible from the output. If TIMEOUT is 0, the feature is disabled. This is the default. This commit affects the compression side. Using xz for the decompression side for the above purpose doesn't work yet so well because there is quite a bit of input and output buffering when decompressing. The --long-help or man page were not updated yet. The details of this feature may change.
2013-07-04xz: Don't set src_eof=true after an I/O error because it's useless.Lasse Collin1-3/+0
2013-07-04xz: Fix the test when to read more input.Lasse Collin1-3/+3
Testing for end of file was no longer correct after full flushing became possible with --block-size=SIZE and --block-list=SIZES. There was no bug in practice though because xz just made a few unneeded zero-byte reads.
2013-07-04xz: Move some of the timing code into mytime.[hc].Lasse Collin6-40/+158
This switches units from microseconds to milliseconds. New clock_gettime(CLOCK_MONOTONIC) will be used if available. There is still a fallback to gettimeofday().
2013-07-01xz: Silence a warning seen with _FORTIFY_SOURCE=2.Lasse Collin1-1/+7
Thanks to Christian Hesse.
2013-06-30Man pages: Use similar syntax for synopsis as in xz.Lasse Collin3-10/+10
The man pages of lzmainfo, xzmore, and xzdec had similar constructs as the man page of xz had before the commit eb6ca9854b8eb9fbf72497c1cf608d6b19d2d494. Eric S. Raymond didn't mention these man pages in his bug report, but it's nice to be consistent.
2013-06-29xz: Use non-blocking I/O for the output file.Lasse Collin1-8/+49
Now both reading and writing should be without race conditions with signals. They might still be signal handling issues left. Signals are blocked during many operations to avoid EINTR but it may cause problems e.g. if writing to stderr blocks when trying to display an error message.
2013-06-28xz: Fix return value type in io_write_buf().Lasse Collin1-1/+1
It didn't affect the behavior of the code since -1 becomes true anyway.
2013-06-28xz: Use the self-pipe trick to avoid a race condition with signals.Lasse Collin3-12/+57
It is possible that a signal to set user_abort arrives right before a blocking system call is made. In this case the call may block until another signal arrives, while the wanted behavior is to make xz clean up and exit as soon as possible. After this commit, the race condition is avoided with the input side which already uses non-blocking I/O. The output side still uses blocking I/O and thus has the race condition.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:27:28 +0000