| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
This change is no-op, but good to have just in case
for the future.
|
|
Thanks to Jonathan Nieder.
|
|
This should have been done in
920a69a8d8e4203c5edddd829d932130eac188ea.
|
|
This should avoid some minor portability issues.
|
|
The spec isn't finished and the code didn't compile anymore.
It won't be included in XZ Utils 5.0.0. It's easy to get it
back once the spec is done.
|
|
message_filters_to_str() converts the filter chain to
a string. message_filters_show() replaces the original
message_filters().
uint32_to_optstr() was also added to show the dictionary
size in nicer format when possible.
|
|
The extra space for showing both has been taken from the
sizes field. If the sizes grow big, bigger units than MiB
will be used. It makes it slightly difficult to see that
progress is still happening with huge files, but it should
be OK in practice.
Thanks to Trent W. Buck for <http://bugs.debian.org/574583>
and Jonathan Nieder for suggestions how to fix it.
|
|
Originally both base-2 and base-10 were supported, but since
there seems to be little need for base-10 in XZ Utils, treat
everything as base-2 and also be more relaxed about the case
of the first letter of the suffix. Now xz will accept e.g.
KiB, Ki, k, K, kB, and KB, and interpret them all as 1024. The
recommended spelling of the suffixes are still KiB, MiB, and GiB.
|
|
It still feels a bit wrong to round 1 byte to 1 MiB but
at least it is now done consistently so that the same
byte value is always rounded the same way to MiB.
|
|
Previously the default limit was always 40 % of RAM. The
new limit is a little bit more complex:
- If 40 % of RAM is at least 80 MiB, 40 % of RAM is used
as the limit.
- If 80 % of RAM is over 80 MiB, 80 MiB is used as the limit.
- Otherwise 80 % of RAM is used as the limit.
This should make it possible to decompress files created with
"xz -9" on more systems. Swapping is generally more expected
on systems with less RAM, so higher default limit on them
shouldn't cause too bad surprises in terms of heavy swapping.
Instead, the higher default limit should reduce the number of
bad surprises when it used to prevent decompression of files
created with "xz -9". The DoS prevention system shouldn't be
a DoS itself.
Note that even with the new default limit, a system with 64 MiB
RAM cannot decompress files created with "xz -9" without user
overriding the limit. This should be OK, because if xz is going
to need more memory than the system has RAM, it will run very
very slowly and thus it's good that user has to override the limit
in that case.
|
|
Thanks to Jonathan Nieder.
|
|
This was added in 455e68c030fde8a8c2f5e254c3b3ab9489bf3735.
|
|
|
|
|
|
xz --force accepted symlinks, but didn't remove
them after successful compression. Instead, an error
message was displayed.
|
|
Previously it was set statically to CRC64 or CRC32
depending on options passed to the configure script.
|
|
|
|
If signal handlers haven't been established, then it's
useless to try to block them, especially since the sigset_t
used for blocking hasn't been initialized yet.
|
|
The opening of the destination file is now delayed a little.
The coder is initialized, and if decompressing, the memory
usage of the first Block compared against the memory
usage limit before the destination file is opened. This
means that if --force was used, the old "target" file won't
be deleted so easily when something goes wrong very early.
Thanks to Mark K for the bug report.
The above fix required some changes to progress message
handling. Now there is a separate function for setting and
printing the filename. It is used also in list.c.
list_file() now handles stdin correctly (gives an error).
A useless check for user_abort was removed from file_io.c.
|
|
This should have been already in
0bc9eab243dee3be764b3530433a7fcdc3f7c6a1.
|
|
|
|
|
|
Thanks to Robert Readman.
|
|
Added a note to translators too.
Thanks to Robert Readman.
|
|
This was introduced in
0dd6d007669b946543ca939a44243833c79e08f4 two days ago.
|
|
|
|
This is a bit rough but should be useful for basic things.
Ideas (with detailed examples) about the output format are
welcome.
The output of --robot --list is not necessarily stable yet,
although I don't currently have any plans about changing it.
The man page hasn't been updated yet.
|
|
It will be used by --list.
|
|
It is to ensure that floating point numbers
will always have a dot as the decimal separator.
|
|
|
|
|
|
to a terminal even if --force is specified.
It just seems more reasonable this way.
The new behavior matches bzip2. The old one matched gzip.
|
|
to stdout even if --force is used.
--force will still enable compression of symlinks, but only
in case they point to a regular file.
The new way simply seems more reasonable. It matches gzip's
behavior while the old one matched bzip2's behavior.
|
|
The problem was introduced when adding sparse file
support in 465d1b0d6518c5d980f2db4c2d769f9905bdd902.
Thanks to Charles Wilson.
|
|
for translation bugs.
|
|
Thanks to Marek Černocký.
|
|
Fix a missing _() in the error message too.
|
|
With bad luck this could cause a segfault due to
reading (but not writing) past the end of the buffer.
|
|
a regular file.
Sparse file creation can be disabled with --no-sparse.
I don't promise yet that the name of this option won't
change before 5.0.0. It's possible that the code, that
checks when it is safe to use sparse output on stdout,
is not good enough, and a more flexible command line
option is needed to configure sparse file handling.
|
|
Currently --robot works only with --info-memory and
--version. --help and --long-help work too, but --robot
has no effect on them.
Thanks to Jonathan Nieder for the original patches.
|
|
I had hoped to keep liblzma as purely a compression
library as possible (e.g. file I/O will go into
a different library), but it seems that applications
linking agaisnt liblzma need some way to determine
the memory usage limit, and knowing the amount of RAM
is one reasonable way to help making such decisions.
Thanks to Jonathan Nieder for the original patch.
|
|
|
|
|
|
Originally the idea was that using LZMA_FULL_FLUSH
with Stream encoder would read the filter chain
from the same array that was used to intialize the
Stream encoder. Since most apps wouldn't use
LZMA_FULL_FLUSH, most apps wouldn't need to keep
the filter chain available after initializing the
Stream encoder. However, due to my mistake, it
actually required keeping the array always available.
Since setting the new filter chain via the array
used at initialization time is not a nice way to do
it for a couple of reasons, this commit ditches it
and introduces lzma_filters_update(). This new function
replaces also the "persistent" flag used by LZMA2
(and to-be-designed Subblock filter), which was also
an ugly thing to do.
Thanks to Alexey Tourbin for reminding me about the problem
that Stream encoder used to require keeping the filter
chain allocated.
|
|
the man page though.
Thanks to Jim Meyering for noticing this.
|
|
|
|
Thanks to Jouk Jansen.
|
|
Thanks to Jouk Jansen.
|
|
Separate a few reusable components from XZ Utils specific
code. The reusable code is now in "tuklib" modules. A few
more could be separated still, e.g. bswap.h.
Fix some bugs in lzmainfo.
Fix physmem and cpucores code on OS/2. Thanks to Elbert Pol
for help.
Add OpenVMS support into physmem. Add a few #ifdefs to ease
building XZ Utils on OpenVMS. Thanks to Jouk Jansen for the
original patch.
|
|
Thanks to Christian Weisgerber for pointing out some of these.
|
|
This fixes "make install" on operating systems using
a suffix for executables.
Cygwin is treated specially. The symlink names won't have
.exe suffix even though the executables themselves have.
Thanks to Charles Wilson.
|
|
|
|
xz used to reject "xz --lzma2=pb=2," while
"xz --lzma2=pb=2,," worked. Now both work.
|
|
Seems that in addition on Windows and DOS, also OpenBSD
lacks support for %'d style printf() format strings.
So far that is the only modern POSIX-like system I know
with this problem, but after this hack, the thousand
separator shouldn't be a problem on any system.
Maybe testing if a format string like %'d produces
reasonable output is invoking undefined behavior on some
systems, but so far all the problematic systems I've tried
just print the raw format string (e.g. %'d prints 'd).
Maybe Autoconf test would have been better, but this
hack works also for cross-compilation, and avoids
recompilation in case the system libc starts to support
the thousand separator.
|
|
|
|
|
|
|
|
install-exec-hook -> install-data-hook
|
|
Make xz error message translation usable outside
xz (at least in upcoming lzmainfo).
|
|
|
|
|
|
invalid memory access if XZ_OPT was defined.
|
|
|
|
|
|
This may slightly ease writing scripts that construct
filter-specific option strings dynamically.
|
|
when no custom chain is in use.
|
|
like "un", "cat", and "lz" when determining if
xz is run as unxz, xzcat, lzma, unlzma, or lzcat.
This is to ensure that if xz is renamed (e.g. via
--program-transform-name), it doesn't so easily
work in wrong mode.
|
|
use AC_PROG_SED. We don't do anything fancy with sed,
so this should work OK. libtool 2.2 sets SED but 1.5
doesn't, so $(SED) happened to work when using libtool 2.2.
|
|
files as is to standard output.
This feature is needed to be more compatible with gzip's
behavior. This was more complicated to implement than it
sounds, because the way liblzma is able to return errors with
files of only a few bytes in size. xz now has its own file
type detection code and no longer uses lzma_auto_decoder().
|
|
xz and xzdec.
Use also PACKAGE_NAME instead of hardcoding "XZ Utils".
|
|
Don't use libtool convenience libraries to avoid recently
discovered long-standing subtle but somewhat severe bugs
in libtool (at least 1.5.22 and 2.2.6 are affected). It
was found when porting XZ Utils to Windows
<http://lists.gnu.org/archive/html/libtool/2009-06/msg00070.html>
but the problem is significant also e.g. on GNU/Linux.
Unless --disable-shared is passed to configure, static
library built from a set of convenience libraries will
contain PIC objects. That is, while libtool builds non-PIC
objects too, only PIC objects will be used from the
convenience libraries. On 32-bit x86 (tested on mobile XP2400+),
using PIC instead of non-PIC makes the decompressor 10 % slower
with the default CFLAGS.
So while xz was linked against static liblzma by default,
it got the slower PIC objects unless --disable-shared was
used. I tend develop and benchmark with --disable-shared
due to faster build time, so I hadn't noticed the problem
in benchmarks earlier.
This commit also adds support for building Windows resources
into liblzma and executables.
|
|
to prepare for building them with Autotools.
|
|
|
|
--program-{prefix,suffix,transform} is passed to configure.
|
|
|
|
|
|
to avoid problems on systems with system headers with those
names.
|
|
|
|
format character with snprintf() on POSIX systems but not
on non-POSIX systems and still keep xgettext working.
|
|
Fix the ordering of libgnu.a and LTLIBINTL on the linker
command line and added missing LTLIBINTL to tests/Makefile.am.
|
|
|
|
and --itanium.
|
|
in the xz command line tool.
|
|
|
|
|
|
|
|
--format=lzma. This means that xz emulating lzma
doesn't decompress .xz files, while before this
commit it did. The new way is slightly simpler in
code and especially in upcoming documentation.
|
|
compressing and decompressing. This should be OK now that
xz automatically scales down the compression settings if
they would exceed the memory usage limit (earlier, the limit
for compression was increased to 90 % because low limit broke
scripts that used "xz -9" on systems with low RAM).
Support spcifying the memory usage limit as a percentage
of RAM (e.g. --memory=50%).
Support --threads=0 to reset the thread limit to the default
value (number of available CPU cores). Use UINT32_MAX instead
of SIZE_MAX as the maximum in args.c. hardware.c was already
expecting uint32_t value.
Cleaned up the output of --help and --long-help.
|
|
Don't round the memory usage limit in xzdec --help to avoid
an integer overflow and to not give wrong impression that
the limit is high enough when it may not actually be.
|
|
Some minor documentation cleanups were made at the same time.
|
|
|
|
- Don't use Windows-specific code on Windows. The old code
required at least Windows 2000. Now it should work on
Windows 98 and later, and maybe on Windows 95 too.
- Use less precision when showing estimated remaining time.
- Fix some small design issues.
|
|
|
|
the number of CPU cores. Added support for using sysinfo()
on Linux systems whose libc lacks appropriate sysconf()
support (at least dietlibc). The Autoconf macros were
split into separate files, and CPU core count detection
was moved from hardware.c to cpucores.h. The core count
isn't used for anything real for now, so a problematic
part in process.c was commented out.
|
|
Now configure.ac will get the version number directly from
src/liblzma/api/lzma/version.h. The intent is to reduce the
number of places where the version number is duplicated. In
future, support for displaying Git commit ID may be added too.
|
|
|
|
Here DOS-like means DOS, Windows, and OS/2.
|
|
message suggests.
|
|
separator on Windows when parsing argv[0].
|
|
linked statically or dynamically against liblzma. The
default is still to use static liblzma, but it can now
be changed by passing --enable-dynamic to configure.
Thanks to Mike Frysinger for the original patch.
Fixed a few minor bugs in configure.ac.
|
|
the comment in hardware.c already said.
|
|
It now builds with MinGW.
|
|
|
|
This doesn't affect most systems, since most systems
have better functions available.
|
|
on Windows. sysdefs.h no longer #includes lzma.h, so lzma.h
has to be #included separately where needed.
|
|
lzma_memlimit_encoder and lzma_memlimit_decoder to
lzma_raw_encoder_memlimit and lzma_raw_decoder_memlimit. :-(
Now it is fixed. Hopefully it doesn't cause too much trouble
to those who already thought API is stable.
|
|
are enabled.
|
|
Half of developers were already forgetting to use these
functions, which could have caused total breakage in some future
liblzma version or even now if --enable-small was used. Now
liblzma uses pthread_once() to do the initializations unless
it has been built with --disable-threads which make these
initializations thread-unsafe.
When --enable-small isn't used, liblzma currently gets needlessly
linked against libpthread (on systems that have it). While it is
stupid for now, liblzma will need threads in future anyway, so
this stupidity will be temporary only.
When --enable-small is used, different code CRC32 and CRC64 is
now used than without --enable-small. This made the resulting
binary slightly smaller, but the main reason was to clean it up
and to handle the lack of lzma_init_check().
The pkg-config file lzma.pc was renamed to liblzma.pc. I'm not
sure if it works correctly and portably for static linking
(Libs.private includes -pthread or other operating system
specific flags). Hopefully someone complains if it is bad.
lzma_rc_prices[] is now included as a precomputed array even
with --enable-small. It's just 128 bytes now that it uses uint8_t
instead of uint32_t. Smaller array seemed to be at least as fast
as the more bloated uint32_t array on x86; hopefully it's not bad
on other architectures.
|
|
|
|
|
|
|
|
|
|
to take a preset as a template and modify it a little.
|
|
ability to also validate the filter chain and options (not
implemented yet for all filters).
|
|
progress indicator but since COLUMNS isn't usually available,
the code was left commented out.
|
|
|
|
|
|
|
|
lzma, unlzma, and lzcat in "make install" for backwards
compatibility with LZMA Utils 4.32.x; I'm not sure if this
should be the default though.
|
