| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
This makes these sandboxing methods stricter when no files are
created or deleted. That is, it's a middle ground between the
initial sandbox and the strictest single-file-to-stdout sandbox:
this allows opening files for reading but output has to go to stdout.
|
|
Linux 6.7 added support for ABI version 4 which restricts
TCP connections which xz won't need and thus those can be
forbidden now. Since the ABI version is handled at runtime,
supporting version 4 won't cause any compatibility issues.
Note that new enough kernel headers are required to get
version 4 support enabled at build time.
|
|
Landlock is now always used just like pledge(2) is: first in more
permissive mode and later (under certain common conditions) in
a strict mode that doesn't allow opening more files.
I put pledge(2) first in sandbox.c because it's the simplest API
to use and still somewhat fine-grained for basic applications.
So it's the simplest thing to understand for anyone reading sandbox.c.
|
|
|
|
Also explicitly initialize progress_automatic to make it clear
that it can be read before message_init() sets it. Static variable
was initialized to false by default already so this is only for
clarity.
|
|
This kind of fixes the problem reported here:
https://bugs.launchpad.net/ubuntu/+source/xz-utils/+bug/1291020
|
|
|
|
|
|
Translations and doc/xz-file-format.txt and doc/lzma-file-format.txt
were not touched.
COPYING.0BSD was added.
|
|
This hopefully does more good than bad:
+ It's faster by default.
+ Only the threaded compressor creates files that
can be decompressed in threaded mode.
- Compression ratio is worse, usually not too much though.
When it matters, -T1 must be used.
- Memory usage increases.
- Scripts that assume single-threaded mode but don't use -T1 will
possibly use too much resources, for example, if they run
multiple xz processes in parallel to compress multiple files.
- Output from single-threaded and multi-threaded compressors
differ but such changes could happen for other reasons too
(they just haven't happened since 5.0.0).
|
|
|
|
Version 5.6.0 will be shown, even though upcoming alphas and betas
will be able to support this filter. 5.6.0 looks nicer in the output and
people shouldn't be encouraged to use an unstable version in production
in any way.
|
|
|
|
A special note was added to suggest using four-byte alignment when the
compressed instruction extension is not present in a RISC-V binary.
|
|
The new Filter ID is 0x0B.
Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter,
the xz CLI updates, and the Autotools build system modifications.
Thanks to Igor Pavlov for his many contributions to the design of
the filter.
|
|
|
|
This comment is repeated in xzdec.c to help remind us why all the
capabilities are removed from stdin in certain situations.
|
|
|
|
|
|
|
|
The new is_tty() will report if a file descriptor is a terminal or not.
On POSIX systems, it is a wrapper around isatty(). However, the native
Windows implementation of isatty() will return true for all character
devices, not just terminals. So is_tty() has a special case for Windows
so it can use alternative Windows API functions to determine if a file
descriptor is a terminal.
This fixes a bug with MSVC and MinGW-w64 builds that refused to read from
or write to non-terminal character devices because xz thought it was a
terminal. For instance:
xz foo -c > /dev/null
would fail because /dev/null was assumed to be a terminal.
|
|
Now it reads from argv[] instead of args->arg_names.
|
|
The following command caused a segmentation fault:
xz -Fraw --lzma1 --files=foo
when foo was a valid file. The usage of --files or --files0 was not
being checked when compressing or decompressing in raw mode without a
suffix. The suffix checking code was meant to validate that all files
to be processed are "-" (if not writing to standard out), meaning the
data is only coming from standard in. In this case, there were no file
names to check since --files and --files0 store their file name in a
different place.
Later code assumed the suffix was set and caused a segmentation fault.
Now, the above command results in an error.
|
|
The previous version set opt_stdout, but this caused an issue with
copying an input file to standard out when decompressing an unknown file
type. The following needs to result in an error:
echo foo | xz -df
since -c, --stdout is not used. This fixes the previous error by not
setting opt_stdout.
|
|
This fixes a bug introduced in cc5aa9ab138beeecaee5a1e81197591893ee9ca0
when the suffix check was initially moved. This caused a situation that
previously worked:
echo foo | xz -Fraw --lzma1 | wc -c
to fail because the old code knew that this would write to standard out
so a suffix was not needed.
|
|
If the -c, --stdout argument is not used, then we can still detect when
the data will be written to standard out if all of the provided
filenames are "-" (denoting standard in) or if no filenames are
provided.
|
|
It is enabled only when decompressing one file to stdout,
similar to how Capsicum is used.
Landlock was added in Linux 5.13.
|
|
This removes support for FreeBSD 10.0 and 10.1 which used
<sys/capability.h> instead of <sys/capsicum.h>. Support for
FreeBSD 10.1 ended on 2016-12-31. So now FreeBSD >= 10.2 is
required to enable Capsicum support.
This also removes support for Capsicum on Linux (libcaprights)
which seems to have been unmaintained since 2017 and Linux 4.11:
https://github.com/google/capsicum-linux
|
|
If winpthreads are used for threading, it's OK to use clock_gettime()
from winpthreads too.
|
|
This commit alone doesn't change anything in the real-world:
- configure.ac currently checks for clock_gettime() only
when using pthreads.
- CMakeLists.txt doesn't check for clock_gettime() on Windows.
So clock_gettime() wasn't used with MinGW-w64 before either.
clock_gettime() provides monotonic time and it's better than
gettimeofday() in this sense. But clock_gettime() is defined
in winpthreads, and liblzma or xz needs nothing else from
winpthreads. By avoiding clock_gettime(), we avoid the dependency on
libwinpthread-1.dll or the need to link against the static version.
As a bonus, GetTickCount64() and MinGW-w64's gettimeofday() can be
faster than clock_gettime(CLOCK_MONOTONIC, &tv). The resolution
is more than good enough for the progress indicator in xz.
|
|
|
|
|
|
Before this commit, the following writes "foo" to the
console and deletes the input file:
echo foo | xz > con_xz
xz --suffix=_xz --decompress con_xz
It cannot happen without --suffix because names like con.xz
are also special and so attempting to decompress con.xz
(or compress con to con.xz) will already fail when opening
the input file.
Similar thing is possible when compressing. The following
writes to "nul" and the input file "n" is deleted.
echo foo | xz > n
xz --suffix=ul n
Now xz checks if the destination is a special file before
continuing. DOS/DJGPP version had a check for this but
Windows (and OS/2) didn't.
|
|
For compatibility with C23's [[noreturn]], tuklib_attr_noreturn
must be at the beginning of declaration (before "extern" or
"static", and even before any GNU C's __attribute__).
This commit also moves all other function attributes to
the beginning of function declarations. "extern" is kept
at the beginning of a line so the attributes are listed on
separate lines before "extern" or "static".
|
|
xrealloc() is obviously incorrect, modern GCC docs even
mention realloc() as an example where this attribute
cannot be used.
liblzma's lzma_alloc() and lzma_alloc_zero() would be
correct uses most of the time but custom allocators
may use a memory pool or otherwise hold the pointer
so aliasing issues could happen in theory.
The xstrdup() case likely was correct but I removed it anyway.
Now there are no __malloc__ attributes left in the code.
The allocations aren't in hot paths so this should make
no practical difference.
|
|
Thanks to Kelvin Lee for the original patches
and testing the modifications I made.
|
|
It's available since Windows Vista.
|
|
|
|
|
|
|
|
|
|
Now the two variations of the format strings are created with
a macro, and the whole detection code can be easily disabled
on platforms where thousand separator formatting is known to
not work (MSVC has no support, and on DJGPP 2.05 it can have
problems in some cases).
|
|
SSIZE_MAX isn't readily available on MSVC. Removing it means
that there is one thing less to worry when porting to MSVC.
|
|
|
|
|
|
This string is used to print a filename when using "xz -v" and
stderr isn't a terminal.
|
|
|
|
|
|
The Memory limit information section described three output
columns when it actually has six. This was reworded to
"multiple" to make it more future proof.
|
|
* Moved max_block_list_size from a global to local variable.
* Reworded error message in validate_block_list_filter().
* Removed helper function filter_chain_error().
* Changed 1 << X to 1U << X in many places
|
|
|
|
|
|
Changed will print => prints in xz --robot --version description to
match --robot --info-memory description.
|
|
The order is now consistent with the order the command line arguments
are documented earlier in the man page. The new order is:
1. --list
2. --info-memory
3. --version
Instead of the previous order:
1. --version
2. --info-memory
3. --list
|
|
|
|
The --filters-help can be used to help create filter chains with the
--filters and --filtersX options. The message in --long-help is too
short to fully explain the syntax to construct complex filter chains.
In --robot mode, xz will only print the output from liblzma function
lzma_str_list_filters.
|
|
The --block-list option description needed updating since the new
--filtersX option changes how it can be used. The new entry for
--filters1=FILTERS ... --filter9=FILTERS was created right after
the --filters option.
|
|
|
|
If a filter chain is set but not used in --block-list, it introduced
unexpected behavior such as requiring an unneeded amount of memory to
compress, reducing the number of threads in multi-threaded encoding, and
printing an incorrect amount of memory needed to decompress.
This also renames filters_init_mask => filters_used_mask. A filter is
assumed to be used if it is specified in --filtersX until
coder_set_compression_settings() determines which filters are referenced
in --block-list.
|
|
When opt_block_size is not used, the Block size for mt encoder is
derived from the minimum of the largest Block specified by
--block-list and the recommended Block size on all filter chains
calculated by lzma_mt_block_size(). This avoids using unnecessary
memory and ensures that all Blocks are large enough for the most memory
needy filter chain.
|
|
|
|
Previously, only the default filter chain could have its memory usage
adjusted. The filter chains specified with --filtersX were not checked
for memory usage. Now, all used filter chains will be adjusted if
necessary.
|
|
The block splitting logic and split_block() function are not needed if
encoders are disabled. This will help slightly reduce the binary size
when built without encoders and allow split_block() to use functions
that require encoders being enabled.
|
|
This will only free filter chains created with --filters1-9 since the
default filter chain may be set from a static function variable. The
complexity to free the default filter chain is not worth the burden on
code maintenance.
|
|
--block-list is only supported with compression in xz format. This avoids
silently ignoring when --block-list is unused.
|
|
The new command line options are meant to be combined with --block-list.
They work as an optional extension to --block-list to specify a custom
filter chain for each block listed. The new options allow the creation
of up to 9 reusable filter chains. For instance:
xz --block-list=1:10MiB,3:5MiB,,2:5MiB,1:0 --filters1=delta--lzma2 \
--filters2=x86--lzma2 --filters3=arm64--lzma2
Will create the following blocks:
1. A block of size 10 MiB with filter chain delta, lzma2.
2. A block of size 5 MiB with filter chain arm64, lzma2.
3. A block of size 5 MiB with filter chain arm64, lzma2.
4. A block of size 5 MiB with filter chain x86, lzma2.
5. A block containing the rest of the file contents with filter chain
delta, lzma2.
|
|
This is a little cleaner than the previous implementation of
forget_filter_chain(). It is also more consistent since
lzma_str_to_filters() will always terminate the filter chain so there
is no need to terminate it later in coder_set_compression_settings().
|
|
Converting from string to filter will also need to be done for block
specific filter chains.
|
|
|
|
The --filters option uses the new lzma_str_to_filters() function
to convert a string into a full filter chain. Using this option
will reset all previous filters set by --preset, --[filter], or
--filters.
|
|
The xz man page timestamp was intentionally left unchanged.
|
|
Also remove unneeded "sandbox_allowed = false;" as this code
will never be run more than once (making it work with multiple
input files isn't trivial).
|
|
|
|
The warning causes the exit status to be 2, so this will cause problems
for many scripted use cases for xz. The sandbox usage is already very
limited already, so silently disabling this allows it to be more usable.
|
|
Thanks to Xin Li for recommending the fix.
|
|
The warning is only used when errno == ENOSYS. Otherwise, xz still
issues a fatal error.
|
|
If a system has the Capsicum header files but does not actually
implement the system calls, then this would render xz unusable. Instead,
we can check if errno == ENOSYS and not issue a fatal error.
|
|
cap_enter() puts the process into the sandbox. If later calls to
cap_rights_limit() fail, then the process can still have some extra
protections.
|
|
start_time is relative to an arbitary point in time, it's not
time of day, so using it for anything else than time differences
wouldn't make sense.
|
|
|
|
mythread.h and thus liblzma already does it.
|
|
This way, if xz is stopped the elapsed time and estimated time
remaining won't get confused by the amount of time spent in
the stopped state.
This raises SIGSTOP. It's not clear to me if this is the correct way.
POSIX and glibc docs say that SIGTSTP shouldn't stop the process if
it is orphaned but this commit doesn't attempt to handle that.
Search for SIGTSTP in section 2.4.3:
https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
|
|
Also edit style to match the existing coding style in the project.
|
|
|
|
|
|
Calling coder_set_compression_settings() in list mode with verbose mode
on caused the filter chain and memory requirements to print. This was
unnecessary since the command results in an error and not consistent
with other formats like lzma and alone.
|
|
It makes no difference here as the return value fits into an int
too and it then gets ignored but this looks better.
|
|
|
|
|
|
clang and gcc differ in how they handle -Wformat-nonliteral. gcc will
allow a non-literal format string as long as the function takes its
format arguments as a va_list.
|
|
SUSv2 and POSIX.1‐2017 declare only a few functions in <strings.h>.
Of these, strcasecmp() is used on some platforms in suffix.c.
Nothing else in the project needs <strings.h> (at least if
building on a modern system).
sysdefs.h currently includes <strings.h> if HAVE_STRINGS_H is
defined and suffix.c relied on this.
Note that dos/config.h doesn't #define HAVE_STRINGS_H even though
DJGPP does have strings.h. It isn't needed with DJGPP as strcasecmp()
is also in <string.h> in DJGPP.
|
|
Previously, mytime.c depended on mythread.h for <time.h> to be included.
|
|
Previously, if threading was enabled HAVE_DECL_CLOCK_MONOTONIC would always
be set to 0 or 1. However, this macro was needed in xz so if xz was not
built with threading and HAVE_DECL_CLOCK_MONOTONIC was not defined but
HAVE_CLOCK_GETTIME was, it caused a warning during build. Now,
HAVE_DECL_CLOCK_MONOTONIC has been renamed to HAVE_CLOCK_MONOTONIC and
will only be set if it is 1.
|
|
|
|
|
|
The code that parses --memlimit options and --block-list modified
the argv[] when parsing the option string from optarg. This was
visible in "ps auxf" and such and could be confusing. I didn't
understand it back in the day when I wrote that code. Now a copy
is allocated when modifiable strings are needed.
|
|
|
|
This was forgotten from 7484744af6cbabe81e92af7d9e061dfd597fff7b.
|
|
Two uses: Displaying encoder filter chain when compressing with -vv,
and displaying the decoder filter chain in --list -vv.
|
|
|
|
Now that liblzma accepts these, we avoid the extra check and
there's one message less for translators too.
|
|
|
|
|
|
This is incompatible with the previous version.
This has space/tab fixes in filter_*.c and bcj.h too.
|
|
The --arm64 isn't actually implemented yet in the form
described in this commit.
Thanks to Jia Tan.
|
|
Modern 32-bit ARM in big endian mode use little endian for
instruction encoding still, so the filters work on such
executables too. It's likely less confusing for users this way.
The --arm64 option hasn't been implemented yet (there is
--experimental-arm64 but it's different). The --arm64 option
is added now anyway because this is the likely result and the
strings need to be ready for translators.
Thanks to Jia Tan.
|
|
|
|
If configured with --disable-lzip-decoder then --long-help will
still list `lzip' in --format but I left it like that since
due to translations it would be messy to have two help strings.
Features are disabled only in special situations so wrong help
in such a situation shouldn't matter much.
Thanks to Michał Górny for the original patch.
|
|
"xz -v < regular_file > out.xz" doesn't display the percentage
and estimated remaining time because it doesn't even try to
check the input file size when input is read from stdin.
This could be improved but for now there's just a comment
to remind about it.
|
|
It worked for one input file since the counters are zero when
xz starts but they weren't reset when starting a new file in
passthru mode. For example, if files A, B, and C are one byte each,
then "xz -dcvf A B C" would show file sizes as 1, 2, and 3 bytes
instead of 1, 1, and 1 byte.
|
|
It is on the man page still.
|
|
|
|
It feels better that the initializations are sandboxed too.
They don't do anything that the pledge() call wouldn't allow.
|
|
Now it includes everything that the human-readable --info-memory shows.
|
|
This should be smaller too since it avoids the string constants.
|
|
Example:
$ xz -dc --single-stream good-0-empty.xz
xz: good-0-empty.xz: Internal error (bug)
The code, that is tries to catch some input file issues early,
didn't anticipate LZMA_STREAM_END which is possible in that
code only when --single-stream is used.
|
|
|
|
Now files with unsupported check will make xz display
a warning, set the exit status to 2 (unless --no-warn is used),
and then decompress the file normally. This is how it was
supposed to work since the beginning but this was broken by
the commit 231c3c7098f1099a56abb8afece76fc9b8699f05, that is,
a little before 5.0.0 was released. The buggy behavior displayed
a message, set exit status 1 (error), and xz didn't attempt to
to decompress the file.
This doesn't matter today except for special builds that disable
CRC64 or SHA-256 at build time (but such builds should be used
in special situations only). The bug matters if new check type
is added in the future and an old xz version is used to decompress
such a file; however, it's likely that such files would use a new
filter too and an old xz wouldn't be able to decompress the file
anyway.
The first hunk in the commit is the actual fix. The second hunk
is a cleanup since LZMA_TELL_ANY_CHECK isn't used in xz.
There is a test file for unsupported check type but it wasn't
used by test_files.sh, perhaps due to different behavior between
xz and the simpler xzdec.
|
|
|
|
Long ago it was used in list.c too but nowadays it's needed
only in io_open_src() so it's nicer to avoid a separate function.
|
|
Treating it as a warning (message + exit status 2) matches gzip
and it seems more logical as at that point the output file has
already been successfully closed. When it's a warning it is
possible to suppress it with --no-warn.
|
|
It will be renamed to --arm64 once it is stable.
Man page or --long-help weren't updated yet.
|
|
|
|
The strings could be more descriptive but it's good
to have some version of this committed now.
--robot mode wasn't changed yet.
|
|
This documents the changes made in commits
6c6da57ae2aa962aabde6892442227063d87e88c,
cad299008cf73ec566f0662a9cf2b94f86a99659, and
898faa97287a756231c663a3ed5165672b417207.
The --info-memory bit hasn't been finished yet
even though it's already mentioned in this commit
under --memlimit-mt-decompress and --threads.
|
|
|
|
See commit fc3d3a7296ef58bb799a73943636b8bfd95339f7.
|
|
|
|
The SIZE_MAX / 3 was 1365 MiB. 1400 MiB gives little more room
and it looks like a round (artificial) number in --info-memory
once --info-memory is made to display it.
Also, using #if avoids useless code on 64-bit builds.
|
|
This is a soft limit in sense that it only affects the number of
threads. It never makes xz fail and it never makes xz change
settings that would affect the compressed output.
The idea is to make -T0 have more reasonable behavior when
the system has very many cores or when a memory-hungry
compression options are used. This also helps with 32-bit xz,
preventing it from running out of address space.
The downside of this commit is that now the number of threads
might become too low compared to what the user expected. I
hope this to be an acceptable compromise as the old behavior
has been a source of well-argued complaints for a long time.
|
|
The main problem withi the old behavior is that the compressed
output is different on single-core systems vs. multicore systems.
This commit fixes it by making -T0 one thread in multithreaded mode
on single-core systems.
The downside of this is that it uses more memory. However, if
--memlimit-compress is used, xz can (thanks to the previous commit)
drop to the single-threaded mode still.
|
|
In single-threaded mode, --memlimit-compress can make xz scale down
the LZMA2 dictionary size to meet the memory usage limit. This
obviously affects the compressed output. However, if xz was in
threaded mode, --memlimit-compress could make xz reduce the number
of threads but it wouldn't make xz switch from multithreaded mode
to single-threaded mode or scale down the LZMA2 dictionary size.
This seemed illogical and there was even a "FIXME?" about it.
Now --memlimit-compress can make xz switch to single-threaded
mode if one thread in multithreaded mode uses too much memory.
If memory usage is still too high, then the LZMA2 dictionary
size can be scaled down too.
The option --no-adjust was also changed so that it no longer
prevents xz from scaling down the number of threads as that
doesn't affect compressed output (only performance). After
this commit --no-adjust only prevents adjustments that affect
compressed output, that is, with --no-adjust xz won't switch
from multithreaded mode to single-threaded mode and won't
scale down the LZMA2 dictionary size.
The man page wasn't updated yet.
|
|
--memlimit-mt-decompress allows specifying the limit for
multithreaded decompression. This matches memlimit_threading in
liblzma. This limit can only affect the number of threads being
used; it will never prevent xz from decompressing a file. The
old --memlimit-decompress option is still used at the same time.
If the value of --memlimit-decompress (the default value or
one specified by the user) is less than the value of
--memlimit-mt-decompress , then --memlimit-mt-decompress is
reduced to match --memlimit-decompress.
Man page wasn't updated yet.
|
|
If threading support is enabled at build time, this will
use lzma_stream_decoder_mt() even for single-threaded mode.
With memlimit_threading=0 the behavior should be identical.
This needs some work like adding --memlimit-threading=LIMIT.
The original patch from Sebastian Andrzej Siewior included
a method to get currently available RAM on Linux. It might
be one way to go but as it is Linux-only, the available-RAM
approach needs work for portability or using a fallback method
on other OSes.
The man page wasn't updated yet.
|
|
It isn't any better now but it's consistent with
the rest of the code base.
|
|
OpenBSD does not allow to change the group of a file if the user
does not belong to this group. In contrast to Linux, OpenBSD also
fails if the new group is the same as the old one. Do not call
fchown(2) in this case, it would change nothing anyway.
This fixes an issue with Perl Alien::Build module.
https://github.com/PerlAlien/Alien-Build/issues/62
|
|
Due to architectural limitations, address space available to a single
userspace process on MIPS32 is limited to 2 GiB, not 4, even on systems
that have more physical RAM -- e.g. 64-bit systems with 32-bit
userspace, or systems that use XPA (an extension similar to x86's PAE).
So, for MIPS32, we have to impose stronger memory limits. I've chosen
2000MiB to give the process some headroom.
|
|
Previously this required using --force but that has other
effects too which might be undesirable. Changing the behavior
of --keep has a small risk of breaking existing scripts but
since this is a fairly special corner case I expect the
likehood of breakage to be low enough.
I think the new behavior is more logical. The only reason for
the old behavior was to be consistent with gzip and bzip2.
Thanks to Vincent Lefevre and Sebastian Andrzej Siewior.
|
|
I don't want to use \c in macro arguments but groff_man(7)
suggests that \f has better portability. \f would be needed
for the .TP strings for portability reasons anyway.
Thanks to Bjarni Ingi Gislason.
|
|
This silences some style checker warnings. Seems that spaces
in the beginning of a line don't need this treatment.
Thanks to Bjarni Ingi Gislason.
|
|
This does it only when ... appears outside macro calls.
Thanks to Bjarni Ingi Gislason.
|
|
A few are simply omitted, most are converted to "for example"
and surrounded with commas. Sounds like that this is better
style, for example, man-pages(7) recommends avoiding such
abbreviations except in parenthesis.
Thanks to Bjarni Ingi Gislason.
|
|
Docs of ancient troff/nroff mention \(em (em-dash) but not \(en
and \- was used for both minus and en-dash. I don't know how
portable \(en is nowadays but it can be changed back if someone
complains. At least GNU groff and OpenBSD's mandoc support it.
Thanks to Bjarni Ingi Gislason for the patch.
|
|
Output is from: test-groff -b -e -mandoc -T utf8 -rF0 -t -w w -z
[ "test-groff" is a developmental version of "groff" ]
Input file is ./src/xz/xz.1
<src/xz/xz.1>:408 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1009 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1743 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:1920 (macro BR): only 1 argument, but more are expected
<src/xz/xz.1>:2213 (macro BR): only 1 argument, but more are expected
Output from nroff and troff is unchanged, except for a font change of a
full stop (.).
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
|
|
https://fossies.org/linux/misc/xz-5.2.5.tar.xz/codespell.html
|
|
DJGPP 2.05 added support for thousands separators but it's
broken at least under WinXP with Finnish locale that uses
a non-breaking space as the thousands separator. Workaround
by disabling thousands separators for DJGPP builds.
|
|
It can be true at least on z/OS.
|
|
|
|
The dependency on po4a is optional. It's never required to install
the translated man pages when xz is built from a release tarball.
If po4a is missing when building from xz.git, the translated man
pages won't be generated but otherwise the build will work normally.
The translations are only updated automatically by autogen.sh and
by "make mydist". This makes it easy to keep po4a as an optional
dependency and ensures that I won't forget to put updated
translations to a release tarball.
The translated man pages aren't installed if --disable-nls is used.
The installation of translated man pages abuses Automake internals
by calling "install-man" with redefined dist_man_MANS and man_MANS.
This makes the hairy script code slightly less hairy. If it breaks
some day, this code needs to be fixed; don't blame Automake developers.
Also, this adds more quotes to the existing shell script code in
the Makefile.am "-hook"s.
|
|
Perhaps it's too drastic but on the other hand it will let me
learn about possible problems if people report the errors.
This won't be backported to the v5.2 branch.
|
|
|
|
See the code comment for reasoning. It's far from perfect but
hopefully good enough for certain cases while hopefully doing
nothing bad in other situations.
At presets -5 ... -9, 4020 MiB vs. 4096 MiB makes no difference
on how xz scales down the number of threads.
The limit has to be a few MiB below 4096 MiB because otherwise
things like "xz --lzma2=dict=500MiB" won't scale down the dict
size enough and xz cannot allocate enough memory. With
"ulimit -v $((4096 * 1024))" on x86-64, the limit in xz had
to be no more than 4085 MiB. Some safety margin is good though.
This is hack but it should be useful when running 32-bit xz on
a 64-bit kernel that gives full 4 GiB address space to xz.
Hopefully this is enough to solve this:
https://bugzilla.redhat.com/show_bug.cgi?id=1196786
FreeBSD has a patch that limits the result in tuklib_physmem()
to SIZE_MAX on 32-bit systems. While I think it's not the way
to do it, the results on --memlimit-compress have been good. This
commit should achieve practically identical results for compression
while leaving decompression and tuklib_physmem() and thus
lzma_physmem() unaffected.
|
|
xz --flush-timeout=2000, old version:
1. xz is started. The next flush will happen after two seconds.
2. No input for one second.
3. A burst of a few kilobytes of input.
4. No input for one second.
5. Two seconds have passed and flushing starts.
The first second counted towards the flush-timeout even though
there was no pending data. This can cause flushing to occur more
often than needed.
xz --flush-timeout=2000, after this commit:
1. xz is started.
2. No input for one second.
3. A burst of a few kilobytes of input. The next flush will
happen after two seconds counted from the time when the
first bytes of the burst were read.
4. No input for one second.
5. No input for another second.
6. Two seconds have passed and flushing starts.
|
|
|
|
The same code sequence repeats so it's nicer as a separate function.
Note that in one case there was no test for opt_mode != MODE_TEST,
but that was only because that condition would always be true, so
this commit doesn't change the behavior there.
|
|
When input blocked, xz --flush-timeout=1 would wake up every
millisecond and initiate flushing which would have nothing to
flush and thus would just waste CPU time. The fix disables the
timeout when no input has been seen since the previous flush.
|
|
|
|
|
|
|
|
This makes it easier to translate the strings.
Also, the string for amount of RAM was shortened.
|
|
LZMA_TIMED_OUT is *internally* used as a value for lzma_ret
enumeration. Previously it was #defined to 32 and cast to lzma_ret.
That way it wasn't visible in the public API, but this was hackish.
Now the public API has eight LZMA_RET_INTERNALx members and
LZMA_TIMED_OUT is #defined to LZMA_RET_INTERNAL1. This way
the code is cleaner overall although the public API has a few
extra mysterious enum members.
|
|
|
|
Caught by clang -Wmissing-variable-declarations.
|
|
Or any off_t which isn't very big (like signed 64 bit integer
that most system have). A small off_t could overflow if the
file being decompressed had long enough run of zero bytes,
which would result in corrupt output.
|
|
lseek() returns -1 on error and checking for -1 is nicer.
|
|
This helps fixing warnings from -Wsign-conversion and makes the
code look better too.
|
|
|
|
|
|
|
|
|
|
Now the widths of the check names is used to adjust the width
of the Check column. This way there no longer is a need to restrict
the widths of the check names to be at most ten terminal-columns.
|
|
|
|
|
|
This should avoid alignment errors in translations with these
strings.
|
|
"xz -dcfv not_an_xz_file" crashed (all four options are
required to trigger it). It caused xz to call
lzma_get_progress(&strm, ...) when no coder was initialized
in strm. In this situation strm.internal is NULL which leads
to a crash in lzma_get_progress().
The bug was introduced when xz started using lzma_get_progress()
to get progress info for multi-threaded compression, so the
bug is present in versions 5.1.3alpha and higher.
Thanks to Filip Palian <Filip.Palian@pjwstk.edu.pl> for
the bug report.
|
|
|
|
|
|
|
|
It ended up printing an uninitialized char-array when trying to
print the check names (column 7) on the "totals" line.
This also changes the column 12 (minimum xz version) to
50000002 (xz 5.0.0) instead of 0 when there are no valid
input files.
Thanks to kidmin for the bug report.
|
|
|
|
|
|
|
|
|
|
xz --list is random access so POSIX_FADV_SEQUENTIAL was clearly
wrong.
|
|
Also mention LZMA_SEEK in xz/message.c to silence a warning.
|
|
xz used to call utime() on Windows, but its result gets lost
on close(). Using _futime() seems to work.
Thanks to Martok for reporting the bug:
http://www.mail-archive.com/xz-devel@tukaani.org/msg00261.html
|
|
Thanks to Evan Nemerson.
|
|
Thanks to Christian Kujau.
|
|
The patch is quite long but it's mostly about adding new #ifdefs
to omit code when encoders or decoders have been disabled.
This adds two new #defines to config.h: HAVE_ENCODERS and
HAVE_DECODERS.
|
|
unlink() can return EBUSY in errno for open files on some
operating systems and file systems.
|
|
|
|
This reverts commit 7a11c4a8e5e15f13d5fa59233b3172e65428efdd.
It is a problem when libc has pipe2() but the kernel is too
old to have pipe2() and thus pipe2() fails. In xz it's pointless
to have a fallback for non-functioning pipe2(); it's better to
avoid pipe2() completely.
Thanks to Michael Fox for the bug report.
|
|
|
|
The sandboxing is used conditionally as described in main.c.
This isn't optimal but it was much easier to implement than
a full sandboxing solution and it still covers the most common
use cases where xz is writing to standard output. This should
have practically no effect on performance even with small files
as fork() isn't needed.
C and locale libraries can open files as needed. This has been
fine in the past, but it's a problem with things like Capsicum.
io_sandbox_enter() tries to ensure that various locale-related
files have been loaded before cap_enter() is called, but it's
possible that there are other similar problems which haven't
been seen yet.
Currently Capsicum is available on FreeBSD 10 and later
and there is a port to Linux too.
Thanks to Loganaden Velvindron for help.
|
|
|
|
|
|
Actually the value of arg_count cannot exceed INT_MAX
but it's nicer as an unsigned int.
|
|
|
|
Now it reads the old flags instead of blindly setting O_NONBLOCK.
The old code may have worked correctly, but this is better.
|
