| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
This is to allow other functions to use it without going
via the public API (lzma_index_decoder()).
|
|
Also mention LZMA_SEEK in xz/message.c to silence a warning.
|
|
The 0 got treated specially in a buggy way and as a result
the function did nothing. The API doc said that 0 was supposed
to return LZMA_PROG_ERROR but it didn't.
Now 0 is treated as if 1 had been specified. This is done because
0 is already used to indicate an error from lzma_memlimit_get()
and lzma_memusage().
In addition, lzma_memlimit_set() no longer checks that the new
limit is at least LZMA_MEMUSAGE_BASE. It's counter-productive
for the Index decoder and was actually needed only by the
auto decoder. Auto decoder has now been modified to check for
LZMA_MEMUSAGE_BASE.
|
|
|
|
It returned LZMA_PROG_ERROR, which was done to avoid zero as
the limit (because it's a special value elsewhere), but using
LZMA_PROG_ERROR is simply inconvenient and can cause bugs.
The fix/workaround is to treat 0 as if it were 1 byte. It's
effectively the same thing. The only weird consequence is
that then lzma_memlimit_get() will return 1 even when 0 was
specified as the limit.
This fixes a very rare corner case in xz --list where a specific
memory usage limit and a multi-stream file could print the
error message "Internal error (bug)" instead of saying that
the memory usage limit is too low.
|
|
Only one definition was visible in a translation unit.
It avoided a few casts and temp variables but seems that
this hack doesn't work with link-time optimizations in compilers
as it's not C99/C11 compliant.
Fixes:
http://www.mail-archive.com/xz-devel@tukaani.org/msg00279.html
|
|
This is the sane thing to do. The conflict with OpenSSL
on some OSes and especially that the OS-provided versions
can be significantly slower makes it clear that it was
a mistake to have the external SHA-256 support enabled by
default.
Those who want it can now pass --enable-external-sha256 to
configure. INSTALL was updated with notes about OSes where
this can be a bad idea.
The SHA-256 detection code in configure.ac had some bugs that
could lead to a build failure in some situations. These were
fixed, although it doesn't matter that much now that the
external SHA-256 is disabled by default.
MINIX >= 3.2.0 uses NetBSD's libc and thus has SHA256_Init
in libc instead of libutil. Support for the libutil version
was removed.
|
|
When optimizing, GCC can reorder code so that an uninitialized
value gets used in a comparison, which makes Valgrind unhappy.
It doesn't happen when compiled with -O0, which I tend to use
when running Valgrind.
Thanks to Rich Prohaska. I remember this being mentioned long
ago by someone else but nothing was done back then.
|
|
It would be too annoying to update other build systems
just because of this.
|
|
People shouldn't rely on the presets when decoding raw streams,
but xz uses the presets as the starting point for raw decoder
options anyway.
lzma_encocder_presets.c was renamed to lzma_presets.c to
make it clear it's not used solely by the encoder code.
|
|
Previously it was omitted if encoders were disabled
with --disable-encoders. It didn't make sense and
it also broke the build.
|
|
If an appropriate header and structure were found by configure,
but a library with a usable SHA-256 functions wasn't, the build
failed.
|
|
Stream Flags and Stream Padding weren't copied from
empty Streams.
|
|
|
|
lzma_index_dup() calls index_dup_stream() which, in case of
an error, calls index_stream_end() to free memory allocated
by index_stream_init(). However, it illogically didn't
actually free the memory. To make it logical, the tree
handling code was modified a bit in addition to changing
index_stream_end().
Thanks to Evan Nemerson for the bug report.
|
|
|
|
The idea of 99 is that it looks a bit weird in this context.
For new features there's no API/ABI stability in devel versions.
|
|
|
|
|
|
|
|
The bug was added in the commit
f48fce093b07aeda95c18850f5e086d9f2383380 and thus
affected 5.1.4beta and 5.2.0. Luckily the bug cannot
cause data corruption or other nasty things.
|
|
|
|
Thanks to Torsten Rupp for reporting this. I had
forgotten to run Valgrind before the 5.2.0 release.
|
|
I know that soname != app version, but I skip AGE=1
in -version-info to make the soname match the liblzma
version anyway. It doesn't hurt anything as long as
it doesn't conflict with library versioning rules.
|
|
|
|
|
|
|
|
This way an invalid filter chain is detected at the Stream
encoder initialization instead of delaying it to the first
call to lzma_code() which triggers the initialization of
the actual filter encoder(s).
|
|
It read the filter chain from a wrong variable. This is a similar
bug that was fixed in 9494fb6d0ff41c585326f00aa8f7fe58f8106a5e.
|
|
Due to a bug in Automake, subdir-objects won't be enabled
for now.
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354
Thanks to Daniel Richard G. for the original patches.
|
|
POSIX supports $< only in inference rules (suffix rules).
Using it elsewhere is a GNU make extension and doesn't
work e.g. with OpenBSD make.
Thanks to Christian Weisgerber for the patch.
|
|
|
|
|
|
Note that this slightly changes how lzma_block_header_decode()
has been documented. Earlier it said that the .version is set
to the lowest required value, but now it says that the .version
field is kept unchanged if possible. In practice this doesn't
affect any old code, because before this commit the only
possible .version was 0.
|
|
I had missed this when writing the commit
5db75054e900fa06ef5ade5f2c21dffdd5d16141.
Thanks to Jun I Jin.
|
|
The Maj macro is used where multiple things are added
together, so making Maj a sum of two expressions allows
some extra freedom for the compiler to schedule the
instructions.
I learned this trick from
<http://www.hackersdelight.org/corres.txt>.
|
|
This looks weird because the rotations become sequential,
but it helps quite a bit on both 32-bit and 64-bit x86:
- It requires fewer instructions on two-operand
instruction sets like x86.
- It requires one register less which matters especially
on 32-bit x86.
I hope this doesn't hurt other archs.
I didn't invent this idea myself, but I don't remember where
I saw it first.
|
|
The unrolling in the previous commit should avoid the
situation where a compiler may think that an uninitialized
variable might be accessed.
|
|
This way a branch isn't needed for each operation
to choose between blk0 and blk2, and still the code
doesn't grow as much as it would with full unrolling.
|
|
|
|
Two locations were not changed yet because the simplest change
assumes that the initial "len" may be greater than "limit".
|
|
|
|
|
|
This doesn't change the match finder output.
|
|
This commit just adds the function. Its uses will be in
separate commits.
This hasn't been tested much yet and it's perhaps a bit early
to commit it but if there are bugs they should get found quite
quickly.
Thanks to Jun I Jin from Intel for help and for pointing out
that string comparison needs to be optimized in liblzma.
|
|
|
|
This avoids a memzero() call for a newly-allocated memory,
which can be expensive when encoding small streams with
an over-sized dictionary.
To avoid using lzma_alloc_zero() for memory that doesn't
need to be zeroed, lzma_mf.son is now allocated separately,
which requires handling it separately in normalize() too.
Thanks to Vincenzo Innocente for reporting the problem.
|
|
|
|
It can be confusing that two header files have the same name.
The public API file is still lzma.h.
|
|
It read the filter chain from a wrong variable.
|
|
|
|
MSVC 2013 doesn't like them. Maybe they aren't so good
for readability either since many aren't used to them.
|
|
Unsurprisingly it makes no difference in compiled output.
|
|
|
|
Thanks to Tomer Chachamu.
|
|
|
|
Now --block-list=SIZES works with in the threaded mode too,
although the performance is still bad due to the use of
LZMA_FULL_FLUSH instead of the new LZMA_FULL_BARRIER.
|
|
In the single-threaded encoder LZMA_FULL_BARRIER is simply
an alias for LZMA_FULL_FLUSH.
|
|
This should have been in b465da5988dd59ad98fda10c2e4ea13d0b9c73bc.
|
|
Now liblzma only uses "mythread" functions and types
which are defined in mythread.h matching the desired
threading method.
Before Windows Vista, there is no direct equivalent to
pthread condition variables. Since this package doesn't
use pthread_cond_broadcast(), pre-Vista threading can
still be kept quite simple. The pre-Vista code doesn't
use anything that wasn't already available in Windows 95,
so the binaries should run even on Windows 95 if someone
happens to care.
|
|
Previously it was done in configure, but doing that goes
against the Autoconf manual. Autoconf requires that it is
possible to override e.g. prefix after running configure
and that doesn't work correctly if liblzma.pc is created
by configure.
A potential downside of this change is that now e.g.
libdir in liblzma.pc is a standalone string instead of
being defined via ${prefix}, so if one overrides prefix
when running pkg-config the libdir won't get the new value.
I don't know if this matters in practice.
Thanks to Vincent Torri.
|
|
On Mac OS X wait() is declared in <sys/wait.h> that
we include one way or other so don't use "wait" as
a variable name.
Thanks to Christian Kujau.
|
|
To avoid false positives when detecting .lzma files,
rare values in dictionary size and uncompressed size fields
were rejected. They will still be rejected if .lzma files
are decoded with lzma_auto_decoder(), but when using
lzma_alone_decoder() directly, such files will now be accepted.
Hopefully this is an OK compromise.
This doesn't affect xz because xz still has its own file
format detection code. This does affect lzmadec though.
So after this commit lzmadec will accept files that xz or
xz-emulating-lzma doesn't.
NOTE: lzma_alone_decoder() still won't decode all .lzma files
because liblzma's LZMA decoder doesn't support lc + lp > 4.
Reported here:
http://sourceforge.net/projects/lzmautils/forums/forum/708858/topic/7068827
|
|
Now it uses lzma_block_uncomp_encode() if the data doesn't
fit into the space calculated by lzma_block_buffer_bound64().
|
|
This race condition could cause a deadlock if lzma_end() was
called before finishing the encoding. This can happen with
xz with debugging enabled (non-debugging version doesn't
call lzma_end() before exiting).
|
|
This also adds a new internal function
lzma_block_buffer_bound64() which is similar to
lzma_block_buffer_bound() but uses uint64_t instead
of size_t.
|
|
This adds lzma_get_progress() to liblzma and takes advantage
of it in xz.
lzma_get_progress() collects progress information from
the thread-specific structures so that fairly accurate
progress information is available to applications. Adding
a new function seemed to be a better way than making the
information directly available in lzma_stream (like total_in
and total_out are) because collecting the information requires
locking mutexes. It's waste of time to do it more often than
the up to date information is actually needed by an application.
|
|
Thanks to Jim Meyering.
|
|
There is a tiny risk of causing breakage: If an application
assigns lzma_stream.allocator to a non-const pointer, such
code won't compile anymore. I don't know why anyone would do
such a thing though, so in practice this shouldn't cause trouble.
Thanks to Jan Kratochvil for the patch.
|
|
It's required by "make mydist".
Fix also the location of EXTRA_DIST+= so that those files
get distributed also if symbol versioning isn't enabled.
|
|
|
|
It is just to be more pedantic and thus perhaps catch broken
files slightly earlier.
|
|
lzma_code() could incorrectly return LZMA_BUF_ERROR if
all of the following was true:
- The caller knows how many bytes of output to expect
and only provides that much output space.
- When the last output bytes are decoded, the
caller-provided input buffer ends right before
the LZMA2 end of payload marker. So LZMA2 won't
provide more output anymore, but it won't know it
yet and thus won't return LZMA_STREAM_END yet.
- A BCJ filter is in use and it hasn't left any
unfiltered bytes in the temp buffer. This can happen
with any BCJ filter, but in practice it's more likely
with filters other than the x86 BCJ.
Another situation where the bug can be triggered happens
if the uncompressed size is zero bytes and no output space
is provided. In this case the decompression can fail even
if the whole input file is given to lzma_code().
A similar bug was fixed in XZ Embedded on 2011-09-19.
|
|
|
|
|
|
It was triggered if initialization failed e.g. due to
running out of memory.
Thanks to Arkadiusz Miskiewicz.
|
|
It was triggered when reinitializing the encoder,
e.g. when encoding two files.
|
|
|
|
Symbol versioning is enabled by default on GNU/Linux,
other GNU-based systems, and FreeBSD.
I'm not sure how stable this is, so it may need
backward-incompatible changes before the next release.
The idea is that alpha and beta symbols are considered
unstable and require recompiling the applications that
use those symbols. Once a symbol is stable, it may get
extended with new features in ways that don't break
compatibility with older ABI & API.
The mydist target runs validate_map.sh which should
catch some probable problems in liblzma.map. Otherwise
I would forget to update the map file for new releases.
|
|
Thanks to Jim Meyering.
|
|
If the operating system libc or other base libraries
provide SHA-256, use that instead of our own copy.
Note that this doesn't use OpenSSL or libgcrypt or
such libraries to avoid creating dependencies to
other packages.
This supports at least FreeBSD, NetBSD, OpenBSD, Solaris,
MINIX, and Darwin. They all provide similar but not
identical SHA-256 APIs; everyone is a little different.
Thanks to Wim Lewis for the original patch, improvements,
and testing.
|
|
|
|
|
|
This way people hopefully won't complain if these APIs
change and break code that used an older API.
|
|
Spot candidates by running these commands:
git ls-files |xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g; print "$ARGV:$n:$v\n"}'
Thanks to Jim Meyering for the original patch.
|
|
This is the simplest method to do threading, which splits
the uncompressed data into blocks and compresses them
independently from each other. There's room for improvement
especially to reduce the memory usage, but nevertheless,
this is a good start.
|
|
This should have been in 5eefc0086d24a65e136352f8c1d19cefb0cbac7a.
|
|
|
|
It didn't mention the return value that is used if
an error occurs.
|
|
This is cleaner and makes it simpler to add new members
to lzma_action enumeration.
|
|
|
|
This is based lzma_chunk_size() that was included in some
development version of liblzma.
|
|
Empty Block was created if the input buffer was empty.
Empty Block wastes a few bytes of space, but more importantly
it triggers a bug in XZ Utils 5.0.1 and older when trying
to decompress such a file. 5.0.1 and older consider such
files to be corrupt. I thought that no encoder creates empty
Blocks when releasing 5.0.2 but I was wrong.
|
|
This return value was missing from the API comments of
four functions.
|
|
The biggest problem was that the integrity check type
wasn't validated, and e.g. lzma_easy_buffer_encode()
would create a corrupt .xz Stream if given an unsupported
Check ID. Luckily applications don't usually try to use
an unsupport Check ID, so this bug is unlikely to cause
many real-world problems.
|
|
It's an internal function and it's not needed by
anything outside stream_encoder.c.
|
|
This reverts commit 352ac82db5d3f64585c07b39e4759388dec0e4d7.
I don't know what I was thinking.
|
|
It's an internal function and it's not needed by
anything outside stream_encoder.c.
|
|
Passing --disable-decoders to configure broke a few
encoders due to missing #ifdefs in filter_common.c.
Thanks to Jason Gorski for the patch.
|
|
|
|
It leaks old filter options structures (hundred bytes or so)
every time the lzma_stream is reinitialized. With the xz tool,
this happens when compressing multiple files.
|
|
The decoder considered empty LZMA2 streams to be corrupt.
This shouldn't matter much with .xz files, because no encoder
creates empty LZMA2 streams in .xz. This bug is more likely
to cause problems in applications that use raw LZMA2 streams.
|
|
|
|
Thanks to Cristian Rodríguez for the original patch.
|
|
|
|
|
|
This has no semantic changes. I find the new names slightly
more logical and they match the names that are already used
in XZ Embedded.
The name fastpos wasn't changed (not worth the hassle).
|
|
|
|
|
|
If any of the reserved members in lzma_stream are non-zero
or non-NULL, LZMA_OPTIONS_ERROR is returned. It is possible
that a new feature in the future is indicated by just setting
a reserved member to some other value, so the old liblzma
version need to catch it as an unsupported feature.
|
|
This lets compiler use shifting instead of 64-bit division.
|
|
|
|
Adding support for LZMA_FINISH for Index encoding and
decoding needed tiny additions to the relevant .c files too.
|
|
lzma_chunk_size() was commented out because it is
currently useless.
|
|
|
|
depth=0 was missing.
|
|
This should reduce the cases where --extreme makes
compression worse. On the other hand, some other
files may now benefit slightly less from --extreme.
|
|
"Extreme" mode might need some further tweaking still.
Docs were not updated yet.
|
|
It was 8 + nice_len / 4, now it is 4 + nice_len / 4.
This allows faster settings at lower nice_len values,
even though it seems that I won't use automatic depth
calcuation with HC3 and HC4 in the presets.
|
|
When using -O2 with GCC, it liked to swap two comparisons
in one "if" statement. It's otherwise fine except that
the latter part, which is seemingly never executed, got
executed (nothing wrong with that) and then triggered
warning in Valgrind about conditional jump depending on
uninitialized variable. A few people find this annoying
so do things a bit differently to avoid the warning.
|
|
|
|
|
|
Thanks to Jonathan Nieder for the reminder.
|
|
This should avoid some minor portability issues.
|
|
The spec isn't finished and the code didn't compile anymore.
It won't be included in XZ Utils 5.0.0. It's easy to get it
back once the spec is done.
|
|
It isn't really useful so omitting it makes things
shorter and slightly more readable.
|
|
With bad luck, lzma_code() could return LZMA_BUF_ERROR
when it shouldn't.
This has been here since the early days of liblzma.
It got triggered by the modifications made to the xz
tool in commit 18c10c30d2833f394cd7bce0e6a821044b15832f
but only when decompressing .lzma files. Somehow I managed
to miss testing that with Valgrind earlier.
This fixes <http://bugs.gentoo.org/show_bug.cgi?id=305591>.
Thanks to Rafał Mużyło for helping to debug it on IRC.
|
|
Thanks to Jonathan Nieder.
|
|
|
|
This allows the files to work on HURD.
Thanks to Jonathan Nieder.
|
|
lzma_block.version has to be initialized even for
lzma_block_header_decode(). This way a future version
of liblzma won't allocate memory in a way that an old
application doesn't know how to free it.
The subtlety of this change is that all current apps
using lzma_block_header_decode() will keep working for
now, because the only possible version value is zero,
and lzma_block_header_decode() unconditionally sets the
version to zero even now. Unless fixed, these apps will
break in the future if a new version of the Block options
is ever needed.
|
|
|
|
This affects lzma_memusage() and lzma_memlimit_get().
|
|
This breaks API and ABI but most apps are not affected
since most apps don't use this part of the API. You will
get a compile error if you are using anything that got
broken.
Summary of changes:
- Ability to store Stream Flags, which are needed
for random-access reading in multi-Stream files.
- Separate function to set size of Stream Padding.
- Iterator structure makes it possible to read the same
lzma_index from multiple threads at the same time.
- A lot faster code to locate Blocks.
- Removed lzma_index_equal() without adding anything
to replace it. I don't know what it should do exactly
with the new features and what actually needs this
function in the first place other than test_index.c,
which now has its own code to compare lzma_indexes.
|
|
|
|
I understood that this is nicer, because then people
don't need to worry about the LZMA_API_STATIC macro.
Thanks to Charles Wilson and Keith Marshall.
|
|
lzma_index_read() didn't skip over Stream Padding
if it was the first record in the Index.
lzma_index_cat() didn't combine small Indexes correctly.
The test suite was updated to check for these bugs.
These bugs didn't affect the xz command line tool or
most users of liblzma in any way.
|
|
The Index decoder code didn't perfectly match the API docs,
which said that *i will be set to point to the decoded Index
only after decoding has succeeded. The docs were a bit unclear
too.
Now the decoder will initially set *i to NULL. *i will be set
to point to the decoded Index once decoding has succeeded.
This simplifies applications too, since it avoids dangling
pointers.
|
|
|
|
when --enable-small has been specified.
|
|
in the text editor.
|
|
I had hoped to keep liblzma as purely a compression
library as possible (e.g. file I/O will go into
a different library), but it seems that applications
linking agaisnt liblzma need some way to determine
the memory usage limit, and knowing the amount of RAM
is one reasonable way to help making such decisions.
Thanks to Jonathan Nieder for the original patch.
|
|
Originally the idea was that using LZMA_FULL_FLUSH
with Stream encoder would read the filter chain
from the same array that was used to intialize the
Stream encoder. Since most apps wouldn't use
LZMA_FULL_FLUSH, most apps wouldn't need to keep
the filter chain available after initializing the
Stream encoder. However, due to my mistake, it
actually required keeping the array always available.
Since setting the new filter chain via the array
used at initialization time is not a nice way to do
it for a couple of reasons, this commit ditches it
and introduces lzma_filters_update(). This new function
replaces also the "persistent" flag used by LZMA2
(and to-be-designed Subblock filter), which was also
an ugly thing to do.
Thanks to Alexey Tourbin for reminding me about the problem
that Stream encoder used to require keeping the filter
chain allocated.
|
|
It was meant to be lzma_filters_copy(), not lzma_filters_dup().
|
|
This will be needed internally by liblzma once I fix
a design mistake in the encoder API. This function may
be useful to applications too so it's good to export it.
|
|
This replaces bswap.h and integer.h.
The tuklib module uses <byteswap.h> on GNU,
<sys/endian.h> on *BSDs and <sys/byteorder.h>
on Solaris, which may contain optimized code
like inline assembly.
|
|
in lz_encoder_hash.h.
|
|
Seems that it is a problem in some cases if the same
version of XZ Utils produces different output on different
endiannesses, so this commit fixes that problem. The output
will still vary between different XZ Utils versions, but I
cannot avoid that for now.
This commit bloatens the code on big endian systems by 1 KiB,
which should be OK since liblzma is bloated already. ;-)
|
|
|
|
|
|
Thanks to Christian Weisgerber for pointing out some of these.
|
|
|
|
and use a fix that works on all systems using
GNU assembler.
Maybe the assembler code is used e.g. on Solaris x86
but let's worry about it if this doesn't work on it.
|
|
Thanks to Karl Berry.
|
|
|
|
Added lzma_nothrow for every function. It adds
throw() when the header is used in C++ code.
Some lzma_attrs were added or removed.
Lots of comments were improved.
|
|
Thanks to Jonathan Stott for the bug report.
|
|
|
|
This is a quick and slightly dirty fix to make the code
conform to the latest file format specification. Without
this patch, it's possible to make corrupt files by
specifying start offset that is not a multiple of the
filter's alignment. Custom start offset is almost never
used, so this was only a minor bug.
The xz command line tool doesn't validate the start offset,
so one will get a bit unclear error message if trying to use
an invalid start offset.
|
|
use AC_PROG_SED. We don't do anything fancy with sed,
so this should work OK. libtool 2.2 sets SED but 1.5
doesn't, so $(SED) happened to work when using libtool 2.2.
|
|
|
|
Don't use libtool convenience libraries to avoid recently
discovered long-standing subtle but somewhat severe bugs
in libtool (at least 1.5.22 and 2.2.6 are affected). It
was found when porting XZ Utils to Windows
<http://lists.gnu.org/archive/html/libtool/2009-06/msg00070.html>
but the problem is significant also e.g. on GNU/Linux.
Unless --disable-shared is passed to configure, static
library built from a set of convenience libraries will
contain PIC objects. That is, while libtool builds non-PIC
objects too, only PIC objects will be used from the
convenience libraries. On 32-bit x86 (tested on mobile XP2400+),
using PIC instead of non-PIC makes the decompressor 10 % slower
with the default CFLAGS.
So while xz was linked against static liblzma by default,
it got the slower PIC objects unless --disable-shared was
used. I tend develop and benchmark with --disable-shared
due to faster build time, so I hadn't noticed the problem
in benchmarks earlier.
This commit also adds support for building Windows resources
into liblzma and executables.
|
|
|
|
to prepare for building them with Autotools.
|
|
Autotools based builds on Windows.
|
|
the Autotools based build system. It's not good yet, more
fixes will follow.
|
|
Fix the ordering of libgnu.a and LTLIBINTL on the linker
command line and added missing LTLIBINTL to tests/Makefile.am.
|
|
Released .xz spec 1.0.2 due to this fix too.
|
|
via lzma_block structure.
This changes ABI but not doesn't break API.
|
|
-Wno-uninitialized to silence a bogus warning.
|
|
liblzma tries to avoid useless free()/malloc() pairs in
initialization when multiple files are handled using the
same lzma_stream. This didn't work with filter chains
due to comparison of wrong pointers in lzma_next_coder_init(),
making liblzma think that no memory reallocation is needed
even when it actually is.
Easy way to trigger this bug is to decompress two files with
a single xz command. The first file should have e.g. x86+LZMA2
as the filter chain, and the second file just LZMA2.
|
|
On 64-bit system it would have gone into infinite
loop if a single input buffer was over 4 GiB (unlikely).
|
|
Some minor documentation cleanups were made at the same time.
|
|
Fortunately, this bug had no security risk other than accepting
some corrupt files as valid.
|
|
|
|
pieces to avoid unneeded dependencies making statically
linked applications bigger than needed.
|
|
Now configure.ac will get the version number directly from
src/liblzma/api/lzma/version.h. The intent is to reduce the
number of places where the version number is duplicated. In
future, support for displaying Git commit ID may be added too.
|
|
Here DOS-like means DOS, Windows, and OS/2.
|
|
line. Previously custom CFLAGS worked only when they were
passed to configure.
|
|
table, which is used also by LZ encoder. This was needed
because calling lzma_crc32() and ignoring the result is
a no-op due to lzma_attr_pure.
|
|
avoid __declspec(dllexport) equivalent.
|
|
need to #define when linking against static liblzma on
platforms like Windows. Most developers don't need to
care about LZMA_API_STATIC at all.
|
|
- Use call/ret pair to get instruction pointer for PIC.
- Use PIC only if PIC or __PIC__ is #defined.
- The code should work on MinGW and Darwin in addition
to GNU/Linux and Solaris.
|
|
other compilers than MinGW. This may hurt readability
of the API headers slightly, but I don't know any
better way to do this.
|
|
function should be rewritten anyway.
|
|
functions, and cleaned up filter.h API header a little.
May be very buggy, not tested yet.
|
|
on Windows.
|
|
on Windows. sysdefs.h no longer #includes lzma.h, so lzma.h
has to be #included separately where needed.
|
|
beginning of the line.
|
|
stdint.h or inttypes.h.
|
|
|
|
|
|
triggered by the previous commit, since these variables were
not used by anything before support for a preset dictionary.
|
|
and LZMA2. It is not supported by the .xz format or the xz
command line tool yet.
|
|
|
|
|
|
|
|
|
