| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
simply nothing that would use it. Allow LZMA_FINISH to the
decoders, which will usually ignore it (auto decoder and
Stream decoder being exceptions).
|
|
|
|
LZMA_Alone files. Decoding of concatenated LZMA_Alone files is
intentionally not supported, so it is better to put this in
auto decoder than LZMA_Alone decoder.
|
|
|
|
|
|
|
|
broken. API has changed a lot and it will still change a
little more here and there. The command line tool doesn't
have all the required changes to reflect the API changes, so
it's easy to get "internal error" or trigger assertions.
|
|
|
|
literal coder as part of the main LZMA encoder or
decoder structure.
Make the LZMA decoder to rely on the current internal API
to free the allocated memory in case an error occurs.
|
|
|
|
specification. Simplify things by removing most of the
support for known uncompressed size in most places.
There are some miscellaneous changes here and there too.
The API of liblzma has got many changes and still some
more will be done soon. While most of the code has been
updated, some things are not fixed (the command line tool
will choke with invalid filter chain, if nothing else).
Subblock filter is somewhat broken for now. It will be
updated once the encoded format of the Subblock filter
has been decided.
|
|
introduced in 369f72fd656f537a9a8e06f13e6d0d4c242be22f.
|
|
misunderstanding of the code. There's no tiny fix for this
problem, so I also cleaned up the code in general.
This reduces the speed of the encoder 2-5 % in the fastest
compression mode ("lzma -1"). High compression modes should
have no noticeable performance difference.
This commit breaks things (especially LZMA_SYNC_FLUSH) but I
will fix them once the new format and LZMA2 has been roughly
implemented. Plain LZMA won't support LZMA_SYNC_FLUSH at all
and won't be supported in the new .lzma format. This may
change still but this is what it looks like now.
Support for known uncompressed size (that is, LZMA or LZMA2
without EOPM) is likely to go away. This means there will
be API changes.
|
|
memmove, and memset.
|
|
|
|
|
|
liblzma's API.
|
|
size. The "fix" breaks LZMA_SYNC_FLUSH at end of stream
with known uncompressed size, but since it currently seems
likely that support for encoding with known uncompressed
size will go away anyway, I'm not fixing this problem now.
|
|
annoying, because "make dist" put two copies of sysdefs.h
into the tarball instead of the symlink.
|
|
once we have a stable release (won't be very soon). The
version number is no longer related to version of LZMA SDK.
Made some small Automake-related changes to toplevel
Makefile.am and configure.ac.
|
|
lzma_extra_free().
|
|
|
|
|
|
|
|
|
|
|
|
theoretical data corruption, which should be very hard to trigger
even intentionally.
|
|
right shift with as fast version that doesn't need
arithmetic right shift. Removed the related check from
configure.ac.
|
|
|
|
(And BTW, the previous commit actually did change the
program logic slightly.)
|
|
word literal instead of char for better consistency.
There are still some names with _char instead of _literal
in lzma_optimum, these may be changed later.
Renamed length coder variables.
This commit doesn't change the program logic.
|
|
specific to liblzma and was *not* present in LZMA SDK.
|
|
|
|
|
|
|
|
lz_get_byte(lz, 0) returns zero. This was broken by
1a3b21859818e4d8e89a1da99699233c1bfd197d.
|
|
|
|
lzma_encoder_init.c. While we don't call
fill_distances_prices() and fill_align_prices() in
lzma_lzma_encoder_init(), we still need to initialize
these two variables so that the fill functions get
called in lzma_encoder_getoptimum.c in the beginning
of a stream.
|
|
get initialized as a side-effect after allocating a new decoder,
but not when the decoder was reused.
|
|
enabled. It hides errors from Valgrind.
|
|
These are already checked elsewhere, so omitting these
gives (very) tiny speed up.
|
|
decoder. There's no danger of information leak here, so
it isn't required. Doing memzero() takes a lot of time
with large dictionaries, which could make it easier to
construct DoS attack to consume too much CPU time.
|
|
it gets done for not only raw encoder, but also Block
and LZMA_Alone encoders.
|
|
|
|
when using non-executable stack.
|
|
git repo. Thanks to Stephan Kulow.
|
|
of the so called simple filters. If there is demand, limited
support for LZMA_SYNC_FLUSH may be added in future.
After this commit, using LZMA_SYNC_FLUSH shouldn't cause
undefined behavior in any situation.
|
|
encoder and decoder, and put the shared things to
block_private.h. Improved the checks a little so that
they may detect too big Compressed Size at initialization
time if lzma_options_block.total_size or .total_limit is
known.
Allow encoding and decoding Blocks with combinations of
fields that are not allowed by the file format specification.
Doing this requires that the application passes such a
combination in lzma_options_lzma; liblzma doesn't do that,
but it's not impossible that someone could find them useful
in some custom file format.
|
|
- Added lzma_memlimit_max() and lzma_memlimit_reached()
API functions.
- Added simple estimation of malloc()'s memory usage
overhead.
- Fixed integer overflow detection in lzma_memlimit_alloc().
- Made some white space cleanups and added more comments.
The description of lzma_memlimit_max() in memlimit.h is bad
and should be improved.
|
|
even the Metadata Flags field. Earlier the code allowed
such files; now they are prohibited as the file format
specification requires.
|
|
lzma_metadata.header_metadata_size was not properly set to
zero if the Metadata had only the Metadata Flags field.
|
|
|
|
already documents.
|
|
LZMA_SYNC_FLUSH or LZMA_FULL_FLUSH is used when
there's no unfinished Block open.
|
|
|
|
|
|
lzma_metadata.header_metadata_size == LZMA_VLI_VALUE_UNKNOWN
is not allowed at all. To indicate missing Header Metadata
Block, header_metadata_size must be set to zero. This is
what Metadata decoder does after this patch too.
Note that other missing fields in lzma_metadata are still
indicated with LZMA_VLI_VALUE_UNKNOWN. This isn't as
illogical as it sounds at first, because missing Size of
Header Metadata Block means that Header Metadata Block is
not present in the Stream. With other Metadata fields,
a missing field means only that the value is unknown.
|
|
|
|
just moved to problem. Now it's really fixed.
|
|
lzma_info_metadata_set() in info.c.
|
|
|
|
liblzma as easy as using zlib, because the easy API
don't require developers to know any fancy LZMA options.
Note that Multi-Block Stream encoding is currently broken.
The easy API should be OK, the bug(s) are elsewhere.
|
|
|
|
|
|
This leaves one known alignment bug unfixed: If repeat count
doesn't fit into 28-bit integer, the encoder has to split
this to multiple Subblocks with Subblock Type `Repeating Data'.
The extra Subblocks may have wrong alignment. Correct alignment
is restored after the split Repeating Data has been completely
written out.
Since the encoder doesn't even try to fix the alignment unless
the size of Data is at least 4 bytes, to trigger this bug you
need at least 4 GiB of repeating data with sequence length of
4 or more bytes. Since the worst thing done by this bug is
misaligned data (no data corruption), this bug simply isn't
worth fixing, because a proper fix isn't simple.
|
|
The API for handing Subfilters was changed to make it
consistent with LZMA_SYNC_FLUSH.
A few sanity checks were added for Subfilter handling. Some
small bugs were fixed. More comments were added.
|
|
function is still shared between encoder and decoder, but the
actual coding is in separate files for encoder and decoder.
There are now separate functions for the actual delta
calculation depending on if Delta is the last filter in the
chain or not. If it is the last, the new code copies the
data from input to output buffer and does the delta
calculation at the same time. The old code first copied the
data, then did the delta in the target buffer, which required
reading through the data twice.
Support for LZMA_SYNC_FLUSH was added to the Delta encoder.
This doesn't change anything in the file format.
|
|
That code is now almost completely in LZ coder, where
it can be shared with other LZ77-based algorithms in
future.
|
|
too early if we hit End of Input while decoding a Subblock of
type Repeating Data. To keep the loop termination condition
elegant, the order of enumerations in coder->sequence were
changed.
To keep the case-labels in roughly the same order as the
enumerations in coder->sequence, large chunks of code was
moved around. This made the diff big and ugly compared to
the amount of the actual changes made.
|
|
in ia64_coder_init(). It triggered assert() in
simple_coder.c, and could have caused a buffer overflow.
This error was probably a copypaste mistake, since most
of the simple filters use unfiltered_max = 4.
|
|
Uncompressed Size, and the last output byte was from RLE,
the code didn't stop decoding as it should have done.
|
|
|
|
|
|
in alone_decoder.c.
|
|
Filter Flags encoder.
|
|
table-based version from LZMA SDK 4.57. This should be
fast on most systems.
A simpler and smaller alternative version is also provided.
On some CPUs this can be even a little faster than the
default table-based version (see comments in fastpos.h),
but on most systems the table-based code is faster.
|
|
|
|
in price_table_gen.c.
|
|
|
|
|
|
from macros to inline functions.
|
|
|
|
|
|
and replace it with a sanity check.
|
|
These changes implement support for LZMA_SYNC_FLUSH in LZMA
encoder, and move the temporary buffer needed by range encoder
from lzma_range_encoder structure to lzma_lz_encoder.
|
|
in match_c.h.
|
|
coder->lz.stream_end_was_reached. That variable
will be removed, and the check isn't required anyway.
Rearrange the check so that it doesn't make one to
think that there could be an integer overflow.
|
|
|
|
|
|
only in one place which isn't performance criticial.
|
|
|
|
|
|
were in wrong order in block_encoder.c.
|
|
should work even if the system has no inttypes.h.
|
|
or no inttypes.h. This is useful when the compiler has
good enough support for C99, but libc headers don't.
Changed liblzma API so that sys/types.h and inttypes.h
have to be #included before #including lzma.h. On systems
that don't have C99 inttypes.h, it's the problem of the
applications to provide the required types and macros
before #including lzma.h.
If lzma.h defined the missing types and macros, it could
conflict with third-party applications whose configure
has detected that the types are missing and defined them
in config.h already. An alternative would have been
introducing lzma_uint32 and similar types, but that would
just be an extra pain on modern systems.
|
|
|
|
|
|
|
|
that use LZMA_SYNC_FLUSH with encoder (not implemented
yet). This is a new feature in the raw LZMA format,
which isn't supported by old decoders. This shouldn't
be a problem in practice, since lzma_alone_encoder()
will not allow LZMA_SYNC_FLUSH, and thus not allow
creating files on decodable with old decoders.
Made lzma_decoder.c to require tab width of 4 characters
if one wants to fit the code in 80 columns. This makes
the code easier to read.
|
|
five input bytes) from LZMA decoder to range decoder
header. Did the same for decoding of direct bits.
|
|
so that the preprocessor removes the /* */ style comments,
which are not supported by some non-GNU assemblers (Solaris)
that otherwise work with this code.
|
|
|
|
better portability. Still needs fixing the commenting.
|
|
|
|
It's not strictly needed there, and just complicates the
code. LZ encoder never even had this feature.
The primary reason to have uncompressed size tracking in
filter encoders was validating that the application
doesn't give different amount of input that it had
promised. A side effect was to validate internal workings
of liblzma.
Uncompressed size tracking is still present in the Block
encoder. Maybe it should be added to LZMA_Alone and raw
encoders too. It's simpler to have one coder just to
validate the uncompressed size instead of having it
in every filter.
|
|
|
|
|
|
|
|
The x86 assembler versions were already OK.
|
|
Cleaned Subblock filter's initialization code too.
|
|
that were disabled for debugging reasons.
|
|
|
