| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
Thanks to Torsten Rupp for reporting this. I had
forgotten to run Valgrind before the 5.2.0 release.
|
|
|
|
|
|
This is similar to the case with stdin.
Thanks to Brad Smith for the bug report and testing
on OpenBSD.
|
|
|
|
It's a problem at least on OpenBSD which doesn't support
O_NONBLOCK on e.g. /dev/null. I'm not surprised if it's
a problem on other OSes too since this behavior is allowed
in POSIX-1.2008.
The code relying on this behavior was committed in June 2013
and included in 5.1.3alpha released on 2013-10-26. Clearly
the development releases only get limited testing.
|
|
Hiding them makes no sense since normally there's no error
when testing the "good" files. With "bad" files errors are
expected and then it makes sense to keep the messages hidden.
|
|
Mention the possible "make check" failure on Solaris in the
Solaris-specific section of INSTALL. It was already in
section 4.5 but it is better mention it in the OS-specific
section too.
|
|
|
|
|
|
|
|
|
|
|
|
I know that soname != app version, but I skip AGE=1
in -version-info to make the soname match the liblzma
version anyway. It doesn't hurt anything as long as
it doesn't conflict with library versioning rules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 32-bit build is now for i686 or newer because the
prebuilt MinGW-w64 toolchains include i686 code in the
executables even if one uses -march=i486.
The build script builds 32-bit SSE2 enabled version too.
Run-time detection of SSE2 support would be nice (on any OS)
but it's not implemented in XZ Utils yet.
|
|
It is to keep all symbols in the lzma_ namespace.
|
|
|
|
|
|
|
|
|
|
|
|
Four new error messages.
|
|
|
|
The following is a copy of a comment inside fr.po:
Note from translator on "file status flags".
The following entry is kept un-translated on purpose. It is difficult to
translate and should only happen in exceptional circumstances which means
that translating would:
- lose some of the meaning
- make it more difficult to look up in search engines; it might happen one
in
a million times, if we dilute the error message in 20 languages, it will be
almost impossible to find an explanation and support for the error.
|
|
Meaning doesn't change at all: it's only for better wording and/or
formatting of a few strings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This way an invalid filter chain is detected at the Stream
encoder initialization instead of delaying it to the first
call to lzma_code() which triggers the initialization of
the actual filter encoder(s).
|
|
|
|
|
|
Thanks to Daniel Richard G. for pointing out that it's
good to sometimes run autoreconf -fi with -Wall.
|
|
|
|
This avoids the possibility of "File name too long" when
creating a temp file when the input file name is very long.
This also means that other users on the system can no longer
see the input file names in /tmp (or whatever $TMPDIR is)
since the temporary directory will have a generic name. This
usually doesn't matter since on many systems one can see
the arguments given to all processes anyway.
The number X chars to mktemp where increased from 6 to 10.
Note that with some shells temp files or dirs won't be used at all.
|
|
It read the filter chain from a wrong variable. This is a similar
bug that was fixed in 9494fb6d0ff41c585326f00aa8f7fe58f8106a5e.
|
|
|
|
|
|
Due to a bug in Automake, subdir-objects won't be enabled
for now.
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354
Thanks to Daniel Richard G. for the original patches.
|
|
Thanks to Milo Casagrande.
|
|
Thanks to Jakub Bogusz.
|
|
Although the old address is still working, the new one should
be preferred. So this commit changes all three places in de.po
accordingly.
Signed-off-by: Andre Noll <maan@tuebingen.mpg.de>
|
|
Signed-off-by: Andre Noll <maan@systemlinux.org>
|
|
That's a funny one since "schießen" means to shoot :)
Signed-off-by: Andre Noll <maan@systemlinux.org>
|
|
|
|
Thanks to Fredrik Wikstrom.
|
|
The behavior of grep -ql varies:
- GNU grep behaves like grep -q.
- OpenBSD grep behaves like grep -l.
POSIX doesn't make it 100 % clear what behavior is expected.
Anyway, using both -q and -l at the same time makes no sense
so both options simply should never be used at the same time.
Thanks to Christian Weisgerber.
|
|
Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>
|
|
Clang and nowadays also GCC accept any -Wfoobar option
but then may give a warning that an unknown warning option
was specified. To avoid adding unsupported warning options,
the options are now tested with -Werror.
Thanks to Charles Diza.
|
|
|
|
POSIX supports $< only in inference rules (suffix rules).
Using it elsewhere is a GNU make extension and doesn't
work e.g. with OpenBSD make.
Thanks to Christian Weisgerber for the patch.
|
|
|
|
|
|
|
|
|
|
|
|
Note that this slightly changes how lzma_block_header_decode()
has been documented. Earlier it said that the .version is set
to the lowest required value, but now it says that the .version
field is kept unchanged if possible. In practice this doesn't
affect any old code, because before this commit the only
possible .version was 0.
|
|
I had missed this when writing the commit
5db75054e900fa06ef5ade5f2c21dffdd5d16141.
Thanks to Jun I Jin.
|
|
|
|
The Maj macro is used where multiple things are added
together, so making Maj a sum of two expressions allows
some extra freedom for the compiler to schedule the
instructions.
I learned this trick from
<http://www.hackersdelight.org/corres.txt>.
|
|
This looks weird because the rotations become sequential,
but it helps quite a bit on both 32-bit and 64-bit x86:
- It requires fewer instructions on two-operand
instruction sets like x86.
- It requires one register less which matters especially
on 32-bit x86.
I hope this doesn't hurt other archs.
I didn't invent this idea myself, but I don't remember where
I saw it first.
|
|
The unrolling in the previous commit should avoid the
situation where a compiler may think that an uninitialized
variable might be accessed.
|
|
This way a branch isn't needed for each operation
to choose between blk0 and blk2, and still the code
doesn't grow as much as it would with full unrolling.
|
|
|
|
Two locations were not changed yet because the simplest change
assumes that the initial "len" may be greater than "limit".
|
|
|
|
|
|
|
|
This doesn't change the match finder output.
|
|
This commit just adds the function. Its uses will be in
separate commits.
This hasn't been tested much yet and it's perhaps a bit early
to commit it but if there are bugs they should get found quite
quickly.
Thanks to Jun I Jin from Intel for help and for pointing out
that string comparison needs to be optimized in liblzma.
|
|
|
|
Thanks to Trần Ngọc Quân.
|
|
Updated: --threads, --block-size, and --block-list
Added: --flush-timeout
|
|
|
|
|
|
This avoids LZMA_PROG_ERROR from lzma_code() with filter chains
that don't support LZMA_SYNC_FLUSH.
|
|
|
|
Now it should be close to the functionality of the original
version by Pavel Raiskup.
|
|
This is a simplified version of Pavel Raiskup's
original patch.
|
|
Mimic the original grep behavior and return exit_success when
at least one xz compressed file matches given pattern.
Original bugreport:
https://bugzilla.redhat.com/show_bug.cgi?id=1108085
Thanks to Pavel Raiskup for the patch.
|
|
|
|
|
|
This avoids a memzero() call for a newly-allocated memory,
which can be expensive when encoding small streams with
an over-sized dictionary.
To avoid using lzma_alloc_zero() for memory that doesn't
need to be zeroed, lzma_mf.son is now allocated separately,
which requires handling it separately in normalize() too.
Thanks to Vincenzo Innocente for reporting the problem.
|
|
|
|
Thanks to Christian Hesse.
|
|
|
|
It can be confusing that two header files have the same name.
The public API file is still lzma.h.
|
|
In this case "make install" could fail if the man page directory
didn't already exist at the destination. If it did exist, a
dangling symlink was created there. Now the link is omitted
instead. This isn't the best fix but it's better than the old
behavior.
|
|
|
|
Add a note about failing "make check". The source of
the problem should be fixed in libtool (if it really is
a libtool bug and not mine) but I'm unable to spend time
on that for now. Thanks to Nelson H. F. Beebe for reporting
the issue.
Add a note about a possible need to run "ldconfig" after
"make install".
|
|
I don't know the details but I have an impression that there's
no problem in practice if using GCC since people have built xz
with GCC (without patching xz), but renaming the variable cannot
hurt either.
Thanks to Mark Ashley.
|
|
I didn't add -DLZMA_UNSTABLE to Makefile so one has to
specify it manually as long as LZMA_UNSTABLE is needed.
|
|
It read the filter chain from a wrong variable.
|
|
|
|
This is for building liblzma. Building xz tool too requires
a little more work. Maybe it will be supported, but for most
MSVC users it's enough to be able to build liblzma.
C99 support in MSVC 2013 is almost usable which is a big
improvement over earlier versions. It's "almost" because
there's a dumb bug that breaks mixed declarations after
an "if" statements unless the "if" statement uses braces:
https://connect.microsoft.com/VisualStudio/feedback/details/808650/visual-studio-2013-c99-compiler-bug
https://connect.microsoft.com/VisualStudio/feedback/details/808472/c99-support-of-mixed-declarations-and-statements-fails-with-certain-types-and-constructs
Hopefully it will get fixed. Then liblzma should be
compilable with MSVC 2013 without patching.
|
|
|
|
|
|
MSVC 2013 doesn't like them. Maybe they aren't so good
for readability either since many aren't used to them.
|
|
Unsurprisingly it makes no difference in compiled output.
|
|
Since the only call to suffix_set() uses optarg
as the argument, fixing this bug doesn't change
the behavior of the program.
|
|
|
|
|
|
Thanks to Tomer Chachamu.
|
|
|
|
|
|
Previously, --block-list and --block-size only worked together
in threaded mode. Boundaries are specified by --block-list, but
--block-size specifies the maximum size for a Block. Now this
works in single-threaded mode too.
Thanks to James M Leddy for the original patch.
|
|
|
|
|
|
|
|
This needs to be updated before 5.2.0.
|
|
|
|
Now if --block-list is used in threaded mode, the encoder
won't need to flush at each Block boundary specified via
--block-list. This improves performance a lot, making
threading helpful with --block-list.
The flush timer was reset after LZMA_FULL_FLUSH but since
LZMA_FULL_BARRIER doesn't flush, resetting the timer is
no longer done.
|
|
Now --block-list=SIZES works with in the threaded mode too,
although the performance is still bad due to the use of
LZMA_FULL_FLUSH instead of the new LZMA_FULL_BARRIER.
|
|
In the single-threaded encoder LZMA_FULL_BARRIER is simply
an alias for LZMA_FULL_FLUSH.
|
|
This should have been in b465da5988dd59ad98fda10c2e4ea13d0b9c73bc.
|
|
|
|
Now liblzma only uses "mythread" functions and types
which are defined in mythread.h matching the desired
threading method.
Before Windows Vista, there is no direct equivalent to
pthread condition variables. Since this package doesn't
use pthread_cond_broadcast(), pre-Vista threading can
still be kept quite simple. The pre-Vista code doesn't
use anything that wasn't already available in Windows 95,
so the binaries should run even on Windows 95 if someone
happens to care.
|
|
The previous commit supports silent rules and that requires
Automake 1.11.
|
|
Previously it was done in configure, but doing that goes
against the Autoconf manual. Autoconf requires that it is
possible to override e.g. prefix after running configure
and that doesn't work correctly if liblzma.pc is created
by configure.
A potential downside of this change is that now e.g.
libdir in liblzma.pc is a standalone string instead of
being defined via ${prefix}, so if one overrides prefix
when running pkg-config the libdir won't get the new value.
I don't know if this matters in practice.
Thanks to Vincent Torri.
|
|
Apparently I didn't even compile-test the previous commit.
Thanks to Christian Hesse.
|
|
It is used for Cygwin too. I'm not sure if that is
a good or bad idea.
Thanks to Vincent Torri.
|
|
|
|
|
|
|
|
|
|
Thanks to Vincent Torri.
|
|
When --flush-timeout=TIMEOUT is used, xz will use
LZMA_SYNC_FLUSH if read() would block and at least
TIMEOUT milliseconds has elapsed since the previous flush.
This can be useful in realtime-like use cases where the
data is simultanously decompressed by another process
(possibly on a different computer). If new uncompressed
input data is produced slowly, without this option xz could
buffer the data for a long time until it would become
decompressible from the output.
If TIMEOUT is 0, the feature is disabled. This is the default.
This commit affects the compression side. Using xz for
the decompression side for the above purpose doesn't work
yet so well because there is quite a bit of input and
output buffering when decompressing.
The --long-help or man page were not updated yet.
The details of this feature may change.
|
|
|
|
Testing for end of file was no longer correct after full flushing
became possible with --block-size=SIZE and --block-list=SIZES.
There was no bug in practice though because xz just made a few
unneeded zero-byte reads.
|
|
This switches units from microseconds to milliseconds.
New clock_gettime(CLOCK_MONOTONIC) will be used if available.
There is still a fallback to gettimeofday().
|
|
|
|
Thanks to Christian Hesse.
|
|
|
|
The man pages of lzmainfo, xzmore, and xzdec had similar
constructs as the man page of xz had before the commit
eb6ca9854b8eb9fbf72497c1cf608d6b19d2d494. Eric S. Raymond
didn't mention these man pages in his bug report, but
it's nice to be consistent.
|
|
Now both reading and writing should be without
race conditions with signals.
They might still be signal handling issues left.
Signals are blocked during many operations to avoid
EINTR but it may cause problems e.g. if writing to
stderr blocks when trying to display an error message.
|
|
It didn't affect the behavior of the code since -1
becomes true anyway.
|
|
It is possible that a signal to set user_abort arrives right
before a blocking system call is made. In this case the call
may block until another signal arrives, while the wanted
behavior is to make xz clean up and exit as soon as possible.
After this commit, the race condition is avoided with the
input side which already uses non-blocking I/O. The output
side still uses blocking I/O and thus has the race condition.
|
|
|
|
Nowadays errno == EFTYPE is documented in open(2).
|
|
POSIX says that fcntl(fd, F_SETFL, flags) returns -1 on
error and "other than -1" on success. This is how it is
documented e.g. on OpenBSD too. On Linux, success with
F_SETFL is always 0 (at least accorinding to fcntl(2)
from man-pages 3.51).
|
|
Due to a wrong variable name, when writing a sparse file
to standard output, *all* file status flags were cleared
(to the extent the operating system allowed it) instead of
only clearing the O_APPEND flag. In practice this worked
fine in the common situations on GNU/Linux, but I didn't
check how it behaved elsewhere.
The original flags were still restored correctly. I still
changed the code to use a separate boolean variable to
indicate when the flags should be restored instead of
relying on a special value in stdout_flags.
|
|
Input file can be a FIFO or something else that doesn't
support posix_fadvise() so don't check the return value
even with an assertion. Nothing bad happens if the call
to posix_fadvise() fails.
|
|
It is a no-op for now, but if an old xz version is used
together with a newer liblzma that supports something new,
then this check becomes important and will stop the old xz
from trying to parse files that it won't understand.
|
|
It should actually still work with Automake 1.10 if
the serial-tests option is removed. Automake 1.13 started
using parallel tests by default and the option to get
the old behavior isn't supported before 1.12.
At least for now, parallel tests don't improve anything
in XZ Utils but they hide the progress output from
test_compress.sh.
|
|
|
|
On Mac OS X wait() is declared in <sys/wait.h> that
we include one way or other so don't use "wait" as
a variable name.
Thanks to Christian Kujau.
|
|
This affects only "xz -lvv". Normal decompression with xz
already detected if Block Header and Index had mismatched
Uncompressed Size fields. So this just makes "xz -lvv"
show such files as corrupt instead of showing the
Uncompressed Size from Index.
|
|
|
|
Thanks to Eric S. Raymond.
|
|
Now the interaction of presets and custom filter chains
is described correctly. Earlier it contradicted itself.
Thanks to DevHC who reported these issues on IRC to me
on 2012-12-14.
|
|
There was somewhat illogical behavior when --extreme was
specified and mixed with custom filter chains.
Before this commit, "xz -9 --lzma2 -e" was equivalent
to "xz --lzma2". After it is equivalent to "xz -6e"
(all earlier preset options get forgotten when a custom
filter chain is specified and the default preset is 6
to which -e is applied). I find this less illogical.
This also affects the meaning of "xz -9e --lzma2 -7".
Earlier it was equivalent to "xz -7e" (the -e specified
before a custom filter chain wasn't forgotten). Now it
is "xz -7". Note that "xz -7e" still is the same as "xz -e7".
Hopefully very few cared about this in the first place,
so pretty much no one should even notice this change.
Thanks to Conley Moorhous.
|
|
Variable-length arrays are mandatory in C99 but optional in C11.
The code doesn't currently use any VLAs and it shouldn't in the
future either to stay compatible with C11 without requiring any
optional C11 features.
|
|
The options are now ordered in the same order as in xz's help
message.
Descriptions were added to the options that are ignored.
I left them in parenthesis even if it looks a bit weird
because I find it easier to spot the ignored vs. non-ignored
options from the list that way.
|
|
|
|
* src/scripts/xzgrep.in: Accept the '-h' option in argument parsing.
|
|
To avoid false positives when detecting .lzma files,
rare values in dictionary size and uncompressed size fields
were rejected. They will still be rejected if .lzma files
are decoded with lzma_auto_decoder(), but when using
lzma_alone_decoder() directly, such files will now be accepted.
Hopefully this is an OK compromise.
This doesn't affect xz because xz still has its own file
format detection code. This does affect lzmadec though.
So after this commit lzmadec will accept files that xz or
xz-emulating-lzma doesn't.
NOTE: lzma_alone_decoder() still won't decode all .lzma files
because liblzma's LZMA decoder doesn't support lc + lp > 4.
Reported here:
http://sourceforge.net/projects/lzmautils/forums/forum/708858/topic/7068827
|
|
Now it uses lzma_block_uncomp_encode() if the data doesn't
fit into the space calculated by lzma_block_buffer_bound64().
|
|
This race condition could cause a deadlock if lzma_end() was
called before finishing the encoding. This can happen with
xz with debugging enabled (non-debugging version doesn't
call lzma_end() before exiting).
|
|
This also adds a new internal function
lzma_block_buffer_bound64() which is similar to
lzma_block_buffer_bound() but uses uint64_t instead
of size_t.
|
|
Use "read" instead of "awk" in xzless to get the version
number of "less". The need for awk was introduced in
the commit db5c1817fabf7cbb9e4087b1576eb26f0747338e.
Thanks to Ariel P for the patch.
|
|
This adds lzma_get_progress() to liblzma and takes advantage
of it in xz.
lzma_get_progress() collects progress information from
the thread-specific structures so that fairly accurate
progress information is available to applications. Adding
a new function seemed to be a better way than making the
information directly available in lzma_stream (like total_in
and total_out are) because collecting the information requires
locking mutexes. It's waste of time to do it more often than
the up to date information is actually needed by an application.
|
|
|
|
Thanks to Olivier Delhomme for pointing out that this
was still missing.
|
|
In v4.999.9beta~30 (xzless: Support compressed standard input,
2009-08-09), xzless learned to parse ‘less -V’ output to figure out
whether less is new enough to handle $LESSOPEN settings starting
with “|-”. That worked well for a while, but the version string from
‘less’ versions 448 (June, 2012) is misparsed, producing a warning:
$ xzless /tmp/test.xz; echo $?
/usr/bin/xzless: line 49: test: 456 (GNU regular expressions): \
integer expression expected
0
More precisely, modern ‘less’ lists the regexp implementation along
with its version number, and xzless passes the entire version number
with attached parenthetical phrase as a number to "test $a -gt $b",
producing the above confusing message.
$ less-444 -V | head -1
less 444
$ less -V | head -1
less 456 (no regular expressions)
So relax the pattern matched --- instead of expecting "less <number>",
look for a line of the form "less <number>[ (extra parenthetical)]".
While at it, improve the behavior when no matching line is found ---
instead of producing a cryptic message, we can fall back on a LESSPIPE
setting that is supported by all versions of ‘less’.
The implementation uses "awk" for simplicity. Hopefully that’s
portable enough.
Reported-by: Jörg-Volker Peetz <jvpeetz@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
|
|
Thanks to Jim Meyering.
|
|
Thanks to Jim Meyering.
|
|
|
|
Otherwise too old version of m4/lib-link.m4 gets included
when autoreconf -fi is run.
|
|
|
|
There is a tiny risk of causing breakage: If an application
assigns lzma_stream.allocator to a non-const pointer, such
code won't compile anymore. I don't know why anyone would do
such a thing though, so in practice this shouldn't cause trouble.
Thanks to Jan Kratochvil for the patch.
|
|
|
|
It has been in the Git repository since 2010 but probably
few people have seen it since it hasn't been included in
the release tarballs. :-(
|
|
It's required by "make mydist".
Fix also the location of EXTRA_DIST+= so that those files
get distributed also if symbol versioning isn't enabled.
|
|
|
|
Also fix the script name mentioned in README.
|
|
Thanks to Jonathan Nieder.
|
|
|
|
|
|
The decoder bug was fixed in 5.0.2 instead of 5.0.3.
|
|
|
|
|
|
|
|
It's broken with threads and when also --block-size is used.
|
|
|
|
It is just to be more pedantic and thus perhaps catch broken
files slightly earlier.
|
