aboutsummaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/common/tuklib_integer.h256
1 files changed, 189 insertions, 67 deletions
diff --git a/src/common/tuklib_integer.h b/src/common/tuklib_integer.h
index 0eaca369..e22aa8ad 100644
--- a/src/common/tuklib_integer.h
+++ b/src/common/tuklib_integer.h
@@ -195,6 +195,9 @@
// Unaligned reads and writes //
////////////////////////////////
+// No-strict-align archs like x86-64
+// ---------------------------------
+//
// The traditional way of casting e.g. *(const uint16_t *)uint8_pointer
// is bad even if the uint8_pointer is properly aligned because this kind
// of casts break strict aliasing rules and result in undefined behavior.
@@ -209,12 +212,115 @@
// build time. A third method, casting to a packed struct, would also be
// an option but isn't provided to keep things simpler (it's already a mess).
// Hopefully this is flexible enough in practice.
+//
+// Some compilers on x86-64 like Clang >= 10 and GCC >= 5.1 detect that
+//
+// buf[0] | (buf[1] << 8)
+//
+// reads a 16-bit value and can emit a single 16-bit load and produce
+// identical code than with the memcpy() method. In other cases Clang and GCC
+// produce either the same or better code with memcpy(). For example, Clang 9
+// on x86-64 can detect 32-bit load but not 16-bit load.
+//
+// MSVC uses unaligned access with the memcpy() method but emits byte-by-byte
+// code for "buf[0] | (buf[1] << 8)".
+//
+// Conclusion: The memcpy() method is the best choice when unaligned access
+// is supported.
+//
+// Strict-align archs like SPARC
+// -----------------------------
+//
+// GCC versions from around 4.x to to at least 13.2.0 produce worse code
+// from the memcpy() method than from simple byte-by-byte shift-or code
+// when reading a 32-bit integer:
+//
+// (1) It may be constructed on stack using using four 8-bit loads,
+// four 8-bit stores to stack, and finally one 32-bit load from stack.
+//
+// (2) Especially with -Os, an actual memcpy() call may be emitted.
+//
+// This is true on at least on ARM, ARM64, SPARC, SPARC64, MIPS64EL, and
+// RISC-V. Of these, ARM, ARM64, and RISC-V support unaligned access in
+// some processors but not all so this is relevant only in the case when
+// GCC assumes that unaligned is not supported or -mstrict-align or
+// -mno-unaligned-access is used.
+//
+// For Clang it makes little difference. ARM64 with -O2 -mstrict-align
+// was one the very few with a minor difference: the memcpy() version
+// was one instruction longer.
+//
+// Conclusion: At least in case of GCC and Clang, byte-by-byte code is
+// the best choise for strict-align archs to do unaligned access.
+//
+// See also: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111502
+//
+// Thanks to <https://godbolt.org/> it was easy to test different compilers.
+// The following is for little endian targets:
+/*
+#include <stdint.h>
+#include <string.h>
+
+uint32_t bytes16(const uint8_t *b)
+{
+ return (uint32_t)b[0]
+ | ((uint32_t)b[1] << 8);
+}
+
+uint32_t copy16(const uint8_t *b)
+{
+ uint16_t v;
+ memcpy(&v, b, sizeof(v));
+ return v;
+}
+
+uint32_t bytes32(const uint8_t *b)
+{
+ return (uint32_t)b[0]
+ | ((uint32_t)b[1] << 8)
+ | ((uint32_t)b[2] << 16)
+ | ((uint32_t)b[3] << 24);
+}
+
+uint32_t copy32(const uint8_t *b)
+{
+ uint32_t v;
+ memcpy(&v, b, sizeof(v));
+ return v;
+}
+
+void wbytes16(uint8_t *b, uint16_t v)
+{
+ b[0] = (uint8_t)v;
+ b[1] = (uint8_t)(v >> 8);
+}
+
+void wcopy16(uint8_t *b, uint16_t v)
+{
+ memcpy(b, &v, sizeof(v));
+}
+
+void wbytes32(uint8_t *b, uint32_t v)
+{
+ b[0] = (uint8_t)v;
+ b[1] = (uint8_t)(v >> 8);
+ b[2] = (uint8_t)(v >> 16);
+ b[3] = (uint8_t)(v >> 24);
+}
+
+void wcopy32(uint8_t *b, uint32_t v)
+{
+ memcpy(b, &v, sizeof(v));
+}
+*/
+
+
+#ifdef TUKLIB_FAST_UNALIGNED_ACCESS
static inline uint16_t
read16ne(const uint8_t *buf)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
return *(const uint16_t *)buf;
#else
uint16_t num;
@@ -227,8 +333,7 @@ read16ne(const uint8_t *buf)
static inline uint32_t
read32ne(const uint8_t *buf)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
return *(const uint32_t *)buf;
#else
uint32_t num;
@@ -241,8 +346,7 @@ read32ne(const uint8_t *buf)
static inline uint64_t
read64ne(const uint8_t *buf)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
return *(const uint64_t *)buf;
#else
uint64_t num;
@@ -255,8 +359,7 @@ read64ne(const uint8_t *buf)
static inline void
write16ne(uint8_t *buf, uint16_t num)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
*(uint16_t *)buf = num;
#else
memcpy(buf, &num, sizeof(num));
@@ -268,8 +371,7 @@ write16ne(uint8_t *buf, uint16_t num)
static inline void
write32ne(uint8_t *buf, uint32_t num)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
*(uint32_t *)buf = num;
#else
memcpy(buf, &num, sizeof(num));
@@ -281,8 +383,7 @@ write32ne(uint8_t *buf, uint32_t num)
static inline void
write64ne(uint8_t *buf, uint64_t num)
{
-#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \
- && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING)
+#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING
*(uint64_t *)buf = num;
#else
memcpy(buf, &num, sizeof(num));
@@ -294,68 +395,122 @@ write64ne(uint8_t *buf, uint64_t num)
static inline uint16_t
read16be(const uint8_t *buf)
{
-#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
uint16_t num = read16ne(buf);
return conv16be(num);
-#else
- uint16_t num = ((uint16_t)buf[0] << 8) | (uint16_t)buf[1];
- return num;
-#endif
}
static inline uint16_t
read16le(const uint8_t *buf)
{
-#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
uint16_t num = read16ne(buf);
return conv16le(num);
-#else
- uint16_t num = ((uint16_t)buf[0]) | ((uint16_t)buf[1] << 8);
- return num;
-#endif
}
static inline uint32_t
read32be(const uint8_t *buf)
{
-#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
uint32_t num = read32ne(buf);
return conv32be(num);
+}
+
+
+static inline uint32_t
+read32le(const uint8_t *buf)
+{
+ uint32_t num = read32ne(buf);
+ return conv32le(num);
+}
+
+
+static inline uint64_t
+read64be(const uint8_t *buf)
+{
+ uint64_t num = read64ne(buf);
+ return conv64be(num);
+}
+
+
+static inline uint64_t
+read64le(const uint8_t *buf)
+{
+ uint64_t num = read64ne(buf);
+ return conv64le(num);
+}
+
+
+// NOTE: Possible byte swapping must be done in a macro to allow the compiler
+// to optimize byte swapping of constants when using glibc's or *BSD's
+// byte swapping macros. The actual write is done in an inline function
+// to make type checking of the buf pointer possible.
+#define write16be(buf, num) write16ne(buf, conv16be(num))
+#define write32be(buf, num) write32ne(buf, conv32be(num))
+#define write64be(buf, num) write64ne(buf, conv64be(num))
+#define write16le(buf, num) write16ne(buf, conv16le(num))
+#define write32le(buf, num) write32ne(buf, conv32le(num))
+#define write64le(buf, num) write64ne(buf, conv64le(num))
+
#else
+
+#ifdef WORDS_BIGENDIAN
+# define read16ne read16be
+# define read32ne read32be
+# define read64ne read64be
+# define write16ne write16be
+# define write32ne write32be
+# define write64ne write64be
+#else
+# define read16ne read16le
+# define read32ne read32le
+# define read64ne read64le
+# define write16ne write16le
+# define write32ne write32le
+# define write64ne write64le
+#endif
+
+
+static inline uint16_t
+read16be(const uint8_t *buf)
+{
+ uint16_t num = ((uint16_t)buf[0] << 8) | (uint16_t)buf[1];
+ return num;
+}
+
+
+static inline uint16_t
+read16le(const uint8_t *buf)
+{
+ uint16_t num = ((uint16_t)buf[0]) | ((uint16_t)buf[1] << 8);
+ return num;
+}
+
+
+static inline uint32_t
+read32be(const uint8_t *buf)
+{
uint32_t num = (uint32_t)buf[0] << 24;
num |= (uint32_t)buf[1] << 16;
num |= (uint32_t)buf[2] << 8;
num |= (uint32_t)buf[3];
return num;
-#endif
}
static inline uint32_t
read32le(const uint8_t *buf)
{
-#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
- uint32_t num = read32ne(buf);
- return conv32le(num);
-#else
uint32_t num = (uint32_t)buf[0];
num |= (uint32_t)buf[1] << 8;
num |= (uint32_t)buf[2] << 16;
num |= (uint32_t)buf[3] << 24;
return num;
-#endif
}
static inline uint64_t
read64be(const uint8_t *buf)
{
-#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
- uint64_t num = read64ne(buf);
- return conv64be(num);
-#else
uint64_t num = (uint64_t)buf[0] << 56;
num |= (uint64_t)buf[1] << 48;
num |= (uint64_t)buf[2] << 40;
@@ -365,17 +520,12 @@ read64be(const uint8_t *buf)
num |= (uint64_t)buf[6] << 8;
num |= (uint64_t)buf[7];
return num;
-#endif
}
static inline uint64_t
read64le(const uint8_t *buf)
{
-#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
- uint64_t num = read64ne(buf);
- return conv64le(num);
-#else
uint64_t num = (uint64_t)buf[0];
num |= (uint64_t)buf[1] << 8;
num |= (uint64_t)buf[2] << 16;
@@ -385,28 +535,9 @@ read64le(const uint8_t *buf)
num |= (uint64_t)buf[6] << 48;
num |= (uint64_t)buf[7] << 56;
return num;
-#endif
}
-// NOTE: Possible byte swapping must be done in a macro to allow the compiler
-// to optimize byte swapping of constants when using glibc's or *BSD's
-// byte swapping macros. The actual write is done in an inline function
-// to make type checking of the buf pointer possible.
-#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
-# define write16be(buf, num) write16ne(buf, conv16be(num))
-# define write32be(buf, num) write32ne(buf, conv32be(num))
-# define write64be(buf, num) write64ne(buf, conv64be(num))
-#endif
-
-#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS)
-# define write16le(buf, num) write16ne(buf, conv16le(num))
-# define write32le(buf, num) write32ne(buf, conv32le(num))
-# define write64le(buf, num) write64ne(buf, conv64le(num))
-#endif
-
-
-#ifndef write16be
static inline void
write16be(uint8_t *buf, uint16_t num)
{
@@ -414,10 +545,8 @@ write16be(uint8_t *buf, uint16_t num)
buf[1] = (uint8_t)num;
return;
}
-#endif
-#ifndef write16le
static inline void
write16le(uint8_t *buf, uint16_t num)
{
@@ -425,10 +554,8 @@ write16le(uint8_t *buf, uint16_t num)
buf[1] = (uint8_t)(num >> 8);
return;
}
-#endif
-#ifndef write32be
static inline void
write32be(uint8_t *buf, uint32_t num)
{
@@ -438,10 +565,8 @@ write32be(uint8_t *buf, uint32_t num)
buf[3] = (uint8_t)num;
return;
}
-#endif
-#ifndef write32le
static inline void
write32le(uint8_t *buf, uint32_t num)
{
@@ -451,10 +576,8 @@ write32le(uint8_t *buf, uint32_t num)
buf[3] = (uint8_t)(num >> 24);
return;
}
-#endif
-#ifndef write64be
static inline void
write64be(uint8_t *buf, uint64_t num)
{
@@ -468,10 +591,8 @@ write64be(uint8_t *buf, uint64_t num)
buf[7] = (uint8_t)num;
return;
}
-#endif
-#ifndef write64le
static inline void
write64le(uint8_t *buf, uint64_t num)
{
@@ -485,6 +606,7 @@ write64le(uint8_t *buf, uint64_t num)
buf[7] = (uint8_t)(num >> 56);
return;
}
+
#endif