aboutsummaryrefslogtreecommitdiff
path: root/src/liblzma/api/lzma
diff options
context:
space:
mode:
Diffstat (limited to 'src/liblzma/api/lzma')
-rw-r--r--src/liblzma/api/lzma/base.h174
-rw-r--r--src/liblzma/api/lzma/block.h211
-rw-r--r--src/liblzma/api/lzma/check.h28
-rw-r--r--src/liblzma/api/lzma/container.h155
-rw-r--r--src/liblzma/api/lzma/delta.h12
-rw-r--r--src/liblzma/api/lzma/filter.h27
-rw-r--r--src/liblzma/api/lzma/index.h97
-rw-r--r--src/liblzma/api/lzma/index_hash.h26
-rw-r--r--src/liblzma/api/lzma/init.h2
-rw-r--r--src/liblzma/api/lzma/lzma.h12
-rw-r--r--src/liblzma/api/lzma/simple.h4
-rw-r--r--src/liblzma/api/lzma/stream_flags.h46
-rw-r--r--src/liblzma/api/lzma/version.h6
-rw-r--r--src/liblzma/api/lzma/vli.h17
14 files changed, 518 insertions, 299 deletions
diff --git a/src/liblzma/api/lzma/base.h b/src/liblzma/api/lzma/base.h
index 54ac3084..bc1aff78 100644
--- a/src/liblzma/api/lzma/base.h
+++ b/src/liblzma/api/lzma/base.h
@@ -95,23 +95,23 @@ typedef enum {
/**<
* \brief Cannot calculate the integrity check
*
- * The usage of this return value is slightly different in
- * encoders and decoders.
+ * The usage of this return value is different in encoders
+ * and decoders.
*
* Encoders can return this value only from the initialization
* function. If initialization fails with this value, the
* encoding cannot be done, because there's no way to produce
* output with the correct integrity check.
*
- * Decoders can return this value only from the lzma_code
- * function and only if the LZMA_TELL_UNSUPPORTED_CHECK flag
- * was used when initializing the decoder. The decoding can
- * still be continued normally even if the check type is
- * unsupported, but naturally the check will not be validated,
- * and possible errors may go undetected.
+ * Decoders can return this value only from lzma_code() and
+ * only if the LZMA_TELL_UNSUPPORTED_CHECK flag was used when
+ * initializing the decoder. The decoding can still be
+ * continued normally even if the check type is unsupported,
+ * but naturally the check will not be validated, and possible
+ * errors may go undetected.
*
* With decoder, it is possible to call lzma_get_check()
- * immediatelly after lzma_code has returned
+ * immediatelly after lzma_code() has returned
* LZMA_UNSUPPORTED_CHECK. This way it is possible to find
* out what the unsupported Check ID was.
*/
@@ -136,8 +136,9 @@ typedef enum {
* Memory allocation failed, or the size of the allocation
* would be greater than SIZE_MAX.
*
- * Due to lazy coding, the coding cannot be continued even
- * if more memory were made available after LZMA_MEM_ERROR.
+ * Due to internal implementation reasons, the coding cannot
+ * be continued even if more memory were made available after
+ * LZMA_MEM_ERROR.
*/
LZMA_MEMLIMIT_ERROR = 6,
@@ -146,19 +147,18 @@ typedef enum {
*
* Decoder would need more memory than allowed by the
* specified memory usage limit. To continue decoding,
- * the memory usage limit has to be increased. See functions
- * lzma_memlimit_get() and lzma_memlimit_set().
+ * the memory usage limit has to be increased with
+ * lzma_memlimit().
*/
LZMA_FORMAT_ERROR = 7,
/**<
- * \brief Unknown file format
+ * \brief File format not recognized
*
* The decoder did not recognize the input as supported file
* format. This error can occur, for example, when trying to
- * decode LZMA_Alone format file with lzma_stream_decoder,
- * because lzma_stream_decoder accepts only the new .lzma
- * format.
+ * decode .lzma format file with lzma_stream_decoder,
+ * because lzma_stream_decoder accepts only the .xz format.
*/
LZMA_OPTIONS_ERROR = 8,
@@ -185,7 +185,7 @@ typedef enum {
* format would be exceeded. These limits are huge, thus
* getting this error from an encoder is mostly theoretical.
* For example, the maximum compressed and uncompressed
- * size of a Stream created with lzma_stream_encoder is
+ * size of a .xz Stream created with lzma_stream_encoder is
* 2^63 - 1 bytes (one byte less than 8 EiB).
*
* Decoders return this error if the input data is corrupt.
@@ -209,7 +209,7 @@ typedef enum {
* Typically the first call to lzma_code() that can do no
* progress returns LZMA_OK instead of LZMA_BUF_ERROR. Only
* the second consecutive call doing no progress will return
- * LZMA_BUF_ERROR. This is by design.
+ * LZMA_BUF_ERROR. This is intentional.
*
* With zlib, Z_BUF_ERROR may be returned even if the
* application is doing nothing wrong. The above hack
@@ -263,10 +263,7 @@ typedef enum {
* lzma_code() call.
*
* Decoder: Decode as much input as possible and produce as
- * much output as possible. This action provides best
- * throughput, but may introduce latency, because the
- * decoder may decode more data into its internal buffers
- * than that fits into next_out.
+ * much output as possible.
*/
LZMA_SYNC_FLUSH = 1,
@@ -297,30 +294,22 @@ typedef enum {
/**<
* \brief Make all the input available at output
*
- * This is like LZMA_SYNC_FLUSH except that this resets the
- * internal encoder state.
- *
- *
- *
- * Finishes encoding of the current Data Block. All the input
- * data going to the current Data Block must have been given
+ * Finish encoding of the current Block. All the input
+ * data going to the current Block must have been given
* to the encoder (the last bytes can still be pending in
* next_in). Call lzma_code() with LZMA_FULL_FLUSH until
* it returns LZMA_STREAM_END. Then continue normally with
* LZMA_RUN or finish the Stream with LZMA_FINISH.
*
- * This action is supported only by Stream encoder and easy
- * encoder (which uses Stream encoder). If there is no
- * unfinished Block, no empty Block is created.
+ * This action is currently supported only by Stream encoder
+ * and easy encoder (which uses Stream encoder). If there is
+ * no unfinished Block, no empty Block is created.
*/
LZMA_FINISH = 3
/**<
* \brief Finish the coding operation
*
- *
- *
- *
* Finishes the coding operation. All the input data must
* have been given to the encoder (the last bytes can still
* be pending in next_in). Call lzma_code() with LZMA_FINISH
@@ -341,8 +330,8 @@ typedef enum {
* \brief Custom functions for memory handling
*
* A pointer to lzma_allocator may be passed via lzma_stream structure
- * to liblzma, and some advanced function take pointer lzma_allocator as
- * a separate function argument. The library will use the functions
+ * to liblzma, and some advanced functions take a pointer to lzma_allocator
+ * as a separate function argument. The library will use the functions
* specified in lzma_allocator for memory handling instead of the default
* malloc() and free().
*
@@ -354,31 +343,32 @@ typedef enum {
*/
typedef struct {
/**
- * \brief Pointer to custom memory allocation function
+ * \brief Pointer to a custom memory allocation function
*
* If you don't want a custom allocator, but still want
* custom free(), set this to NULL and liblzma will use
* the standard malloc().
*
* \param opaque lzma_allocator.opaque (see below)
- * \param nmemb Number of elements like in calloc().
- * liblzma will always set nmemb to 1.
- * This argument exists only for
+ * \param nmemb Number of elements like in calloc(). liblzma
+ * will always set nmemb to 1, so it is safe to
+ * ignore nmemb in a custom allocator if you like.
+ * The nmemb argument exists only for
* compatibility with zlib and libbzip2.
* \param size Size of an element in bytes.
* liblzma never sets this to zero.
*
* \return Pointer to the beginning of a memory block of
- * size nmemb * size, or NULL if allocation fails
+ * `size' bytes, or NULL if allocation fails
* for some reason. When allocation fails, functions
* of liblzma return LZMA_MEM_ERROR.
*
* For performance reasons, the allocator should not waste time
* zeroing the allocated buffers. This is not only about speed, but
* also memory usage, since the operating system kernel doesn't
- * necessarily allocate the requested memory until it is actually
- * used. With small input files liblzma may actually need only a
- * fraction of the memory that it requested for allocation.
+ * necessarily allocate the requested memory in physical memory until
+ * it is actually used. With small input files liblzma may actually
+ * need only a fraction of the memory that it requested for allocation.
*
* \note LZMA_MEM_ERROR is also used when the size of the
* allocation would be greater than SIZE_MAX. Thus,
@@ -389,7 +379,7 @@ typedef struct {
void *(*alloc)(void *opaque, size_t nmemb, size_t size);
/**
- * \brief Pointer to custom memory freeing function
+ * \brief Pointer to a custom memory freeing function
*
* If you don't want a custom freeing function, but still
* want a custom allocator, set this to NULL and liblzma
@@ -432,17 +422,22 @@ typedef struct lzma_internal_s lzma_internal;
* - defining custom memory hander functions; and
* - holding a pointer to coder-specific internal data structures.
*
- * The typical usage
+ * Typical usage:
*
* - After allocating lzma_stream (on stack or with malloc()), it must be
* initialized to LZMA_STREAM_INIT (see LZMA_STREAM_INIT for details).
*
* - Initialize a coder to the lzma_stream, for example by using
- * lzma_easy_encoder() or lzma_auto_decoder(). In contrast to zlib,
- * strm->next_in and strm->next_out are ignored by all initialization
- * functions, thus it is safe to not initialize them yet. The
- * initialization functions always set strm->total_in and strm->total_out
- * to zero.
+ * lzma_easy_encoder() or lzma_auto_decoder(). Some notes:
+ * - In contrast to zlib, strm->next_in and strm->next_out are
+ * ignored by all initialization functions, thus it is safe
+ * to not initialize them yet.
+ * - The initialization functions always set strm->total_in and
+ * strm->total_out to zero.
+ * - If the initialization function fails, no memory is left allocated
+ * that would require freeing with lzma_end() even if some memory was
+ * associated with the lzma_stream structure when the initialization
+ * function was called.
*
* - Use lzma_code() to do the actual work.
*
@@ -451,11 +446,12 @@ typedef struct lzma_internal_s lzma_internal;
* function without calling lzma_end() first. Old allocations are
* automatically freed.
*
- * - Finally, use lzma_end() to free the allocated memory.
+ * - Finally, use lzma_end() to free the allocated memory. lzma_end() never
+ * frees the lzma_stream structure itself.
*
- * Application may modify values of total_in and total_out as it wants.
+ * Application may modify the values of total_in and total_out as it wants.
* They are updated by liblzma to match the amount of data read and
- * written, but liblzma doesn't use the values internally.
+ * written, but aren't used for anything else.
*/
typedef struct {
const uint8_t *next_in; /**< Pointer to the next input byte. */
@@ -475,7 +471,7 @@ typedef struct {
/** Internal state is not visible to applications. */
lzma_internal *internal;
- /**
+ /*
* Reserved space to allow possible future extensions without
* breaking the ABI. Excluding the initialization of this structure,
* you should not touch these, because the names of these variables
@@ -510,11 +506,12 @@ typedef struct {
* *strm = tmp;
*/
#define LZMA_STREAM_INIT \
- { NULL, 0, 0, NULL, 0, 0, NULL, NULL, NULL, NULL, 0, 0, 0, 0 }
+ { NULL, 0, 0, NULL, 0, 0, NULL, NULL, \
+ NULL, NULL, 0, 0, LZMA_RESERVED_ENUM, LZMA_RESERVED_ENUM }
/**
- * \brief Encodes or decodes data
+ * \brief Encode or decode data
*
* Once the lzma_stream has been successfully initialized (e.g. with
* lzma_stream_encoder()), the actual encoding or decoding is done
@@ -531,13 +528,68 @@ extern lzma_ret lzma_code(lzma_stream *strm, lzma_action action)
/**
- * \brief Frees memory allocated for the coder data structures
+ * \brief Free memory allocated for the coder data structures
*
* \param strm Pointer to lzma_stream that is at least initialized
* with LZMA_STREAM_INIT.
*
+ * After lzma_end(strm), strm->internal is guaranteed to be NULL. No other
+ * members of the lzma_stream structure are touched.
+ *
* \note zlib indicates an error if application end()s unfinished
- * stream. liblzma doesn't do this, and assumes that
+ * stream structure. liblzma doesn't do this, and assumes that
* application knows what it is doing.
*/
extern void lzma_end(lzma_stream *strm);
+
+
+/**
+ * \brief Get the memory usage of decoder filter chain
+ *
+ * This function is currently supported only when *strm has been initialized
+ * with a function that takes a memlimit argument. With other functions, you
+ * should use e.g. lzma_raw_encoder_memusage() or lzma_raw_decoder_memusage()
+ * to estimate the memory requirements.
+ *
+ * This function is useful e.g. after LZMA_MEMLIMIT_ERROR to find out how big
+ * the memory usage limit should have been to decode the input. Note that
+ * this may give misleading information if decoding .xz Streams that have
+ * multiple Blocks, because each Block can have different memory requirements.
+ *
+ * \return Rough estimate of how much memory is currently allocated
+ * for the filter decoders. If no filter chain is currently
+ * allocated, some non-zero value is still returned, which is
+ * less than or equal to what any filter chain would indicate
+ * as its memory requirement.
+ *
+ * If this function isn't supported by *strm or some other error
+ * occurs, zero is returned.
+ */
+extern uint64_t lzma_memusage(const lzma_stream *strm);
+
+
+/**
+ * \brief Get the current memory usage limit
+ *
+ * This function is supported only when *strm has been initialized with
+ * a function that takes a memlimit argument.
+ *
+ * \return On success, the current memory usage limit is returned
+ * (always non-zero). On error, zero is returned.
+ */
+extern uint64_t lzma_memlimit_get(const lzma_stream *strm);
+
+
+/**
+ * \brief Set the memory usage limit
+ *
+ * This function is supported only when *strm has been initialized with
+ * a function that takes a memlimit argument.
+ *
+ * \return - LZMA_OK: New memory usage limit successfully set.
+ * - LZMA_MEMLIMIT_ERROR: The new limit is too small.
+ * The limit was not changed.
+ * - LZMA_PROG_ERROR: Invalid arguments, e.g. *strm doesn't
+ * support memory usage limit or memlimit was zero.
+ */
+extern lzma_ret lzma_memlimit_set(lzma_stream *strm, uint64_t memlimit);
diff --git a/src/liblzma/api/lzma/block.h b/src/liblzma/api/lzma/block.h
index 06c1633c..2702cd51 100644
--- a/src/liblzma/api/lzma/block.h
+++ b/src/liblzma/api/lzma/block.h
@@ -22,10 +22,10 @@
/**
- * \brief Options for the Block Header encoder and decoder
+ * \brief Options for the Block and Block Header encoders and decoders
*
- * Different things use different parts of this structure. Some read
- * some members, other functions write, and some do both. Only the
+ * Different Block handling functions use different parts of this structure.
+ * Some read some members, other functions write, and some do both. Only the
* members listed for reading need to be initialized when the specified
* functions are called. The members marked for writing will be assigned
* new values at some point either by calling the given function or by
@@ -33,11 +33,16 @@
*/
typedef struct {
/**
- * \brief Size of the Block Header
+ * \brief Size of the Block Header field
+ *
+ * This is always a multiple of four.
*
* Read by:
* - lzma_block_header_encode()
* - lzma_block_header_decode()
+ * - lzma_block_compressed_size()
+ * - lzma_block_unpadded_size()
+ * - lzma_block_total_size()
* - lzma_block_decoder()
*
* Written by:
@@ -50,12 +55,15 @@ typedef struct {
/**
* \brief Type of integrity Check
*
- * The type of the integrity Check is not stored into the Block
- * Header, thus its value must be provided also when decoding.
+ * The Check ID is not stored into the Block Header, thus its value
+ * must be provided also when decoding.
*
* Read by:
* - lzma_block_header_encode()
* - lzma_block_header_decode()
+ * - lzma_block_compressed_size()
+ * - lzma_block_unpadded_size()
+ * - lzma_block_total_size()
* - lzma_block_encoder()
* - lzma_block_decoder()
*/
@@ -64,19 +72,50 @@ typedef struct {
/**
* \brief Size of the Compressed Data in bytes
*
- * Usually you don't know this value when encoding in streamed mode.
- * In non-streamed mode you can reserve space for this field when
- * encoding the Block Header the first time, and then re-encode the
- * Block Header and copy it over the original one after the encoding
- * of the Block has been finished.
+ * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder
+ * will store this value to the Block Header. Block encoder doesn't
+ * care about this value, but will set it once the encoding has been
+ * finished.
+ *
+ * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will
+ * verify that the size of the Compressed Data field matches
+ * compressed_size.
+ *
+ * Usually you don't know this value when encoding in streamed mode,
+ * and thus cannot write this field into the Block Header.
+ *
+ * In non-streamed mode you can reserve space for this field before
+ * encoding the actual Block. After encoding the data, finish the
+ * Block by encoding the Block Header. Steps in detail:
+ *
+ * - Set compressed_size to some big enough value. If you don't know
+ * better, use LZMA_VLI_MAX, but remember that bigger values take
+ * more space in Block Header.
+ *
+ * - Call lzma_block_header_size() to see how much space you need to
+ * reserve for the Block Header.
+ *
+ * - Encode the Block using lzma_block_encoder() and lzma_code().
+ * It sets compressed_size to the correct value.
+ *
+ * - Use lzma_block_header_encode() to encode the Block Header.
+ * Because space was reserved in the first step, you don't need
+ * to call lzma_block_header_size() anymore, because due to
+ * reserving, header_size has to be big enough. If it is "too big",
+ * lzma_block_header_encode() will add enough Header Padding to
+ * make Block Header to match the size specified by header_size.
*
* Read by:
* - lzma_block_header_size()
* - lzma_block_header_encode()
+ * - lzma_block_compressed_size()
+ * - lzma_block_unpadded_size()
+ * - lzma_block_total_size()
* - lzma_block_decoder()
*
* Written by:
* - lzma_block_header_decode()
+ * - lzma_block_compressed_size()
* - lzma_block_encoder()
* - lzma_block_decoder()
*/
@@ -85,18 +124,11 @@ typedef struct {
/**
* \brief Uncompressed Size in bytes
*
- * Encoder: If this value is not LZMA_VLI_UNKNOWN, it is stored
- * to the Uncompressed Size field in the Block Header. The real
- * uncompressed size of the data being compressed must match
- * the Uncompressed Size or LZMA_OPTIONS_ERROR is returned.
+ * This is handled very similarly to compressed_size above.
*
- * If Uncompressed Size is unknown, End of Payload Marker must
- * be used. If uncompressed_size == LZMA_VLI_UNKNOWN and
- * has_eopm == 0, LZMA_OPTIONS_ERROR will be returned.
- *
- * Decoder: If this value is not LZMA_VLI_UNKNOWN, it is
- * compared to the real Uncompressed Size. If they do not match,
- * LZMA_OPTIONS_ERROR is returned.
+ * Unlike compressed_size, uncompressed_size is needed by fewer
+ * functions. This is because uncompressed_size isn't needed to
+ * validate that Block stays within proper limits.
*
* Read by:
* - lzma_block_header_size()
@@ -140,7 +172,7 @@ typedef struct {
/**
- * \brief Decodes the Block Header Size field
+ * \brief Decode the Block Header Size field
*
* To decode Block Header using lzma_block_header_decode(), the size of the
* Block Header has to be known and stored into lzma_block.header_size.
@@ -154,100 +186,130 @@ typedef struct {
/**
- * \brief Calculates the size of Block Header
+ * \brief Calculate Block Header Size
+ *
+ * Calculate the minimum size needed for the Block Header field using the
+ * settings specified in the lzma_block structure. Note that it is OK to
+ * increase the calculated header_size value as long as it is a multiple of
+ * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size
+ * just means that lzma_block_header_encode() will add Header Padding.
*
* \return - LZMA_OK: Size calculated successfully and stored to
- * options->header_size.
+ * block->header_size.
* - LZMA_OPTIONS_ERROR: Unsupported filters or filter options.
- * - LZMA_PROG_ERROR: Invalid options
+ * - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
*
* \note This doesn't check that all the options are valid i.e. this
* may return LZMA_OK even if lzma_block_header_encode() or
- * lzma_block_encoder() would fail.
+ * lzma_block_encoder() would fail. If you want to validate the
+ * filter chain, consider using lzma_memlimit_encoder() which as
+ * a side-effect validates the filter chain.
*/
-extern lzma_ret lzma_block_header_size(lzma_block *options)
+extern lzma_ret lzma_block_header_size(lzma_block *block)
lzma_attr_warn_unused_result;
/**
- * \brief Encodes Block Header
+ * \brief Encode Block Header
*
- * Encoding of the Block options is done with a single call instead of
- * first initializing and then doing the actual work with lzma_code().
+ * The caller must have calculated the size of the Block Header already with
+ * lzma_block_header_size(). If larger value than the one calculated by
+ * lzma_block_header_size() is used, the Block Header will be padded to the
+ * specified size.
*
* \param out Beginning of the output buffer. This must be
- * at least options->header_size bytes.
- * \param options Block options to be encoded.
+ * at least block->header_size bytes.
+ * \param block Block options to be encoded.
*
- * \return - LZMA_OK: Encoding was successful. options->header_size
+ * \return - LZMA_OK: Encoding was successful. block->header_size
* bytes were written to output buffer.
* - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
- * - LZMA_PROG_ERROR
+ * - LZMA_PROG_ERROR: Invalid arguments, for example
+ * block->header_size is invalid or block->filters is NULL.
*/
-extern lzma_ret lzma_block_header_encode(
- const lzma_block *options, uint8_t *out)
+extern lzma_ret lzma_block_header_encode(const lzma_block *block, uint8_t *out)
lzma_attr_warn_unused_result;
/**
- * \brief Decodes Block Header
+ * \brief Decode Block Header
*
- * Decoding of the Block options is done with a single call instead of
- * first initializing and then doing the actual work with lzma_code().
+ * The size of the Block Header must have already been decoded with
+ * lzma_block_header_size_decode() macro and stored to block->header_size.
+ * block->filters must have been allocated, but not necessarily initialized.
+ * Possible existing filter options are _not_ freed.
*
- * \param options Destination for block options
+ * \param block Destination for block options with header_size
+ * properly initialized.
* \param allocator lzma_allocator for custom allocator functions.
- * Set to NULL to use malloc().
+ * Set to NULL to use malloc() (and also free()
+ * if an error occurs).
* \param in Beginning of the input buffer. This must be
- * at least options->header_size bytes.
+ * at least block->header_size bytes.
*
- * \return - LZMA_OK: Decoding was successful. options->header_size
- * bytes were written to output buffer.
- * - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
- * - LZMA_PROG_ERROR
+ * \return - LZMA_OK: Decoding was successful. block->header_size
+ * bytes were read from the input buffer.
+ * - LZMA_OPTIONS_ERROR: The Block Header specifies some
+ * unsupported options such as unsupported filters.
+ * - LZMA_DATA_ERROR: Block Header is corrupt, for example,
+ * the CRC32 doesn't match.
+ * - LZMA_PROG_ERROR: Invalid arguments, for example
+ * block->header_size is invalid or block->filters is NULL.
*/
-extern lzma_ret lzma_block_header_decode(lzma_block *options,
+extern lzma_ret lzma_block_header_decode(lzma_block *block,
lzma_allocator *allocator, const uint8_t *in)
lzma_attr_warn_unused_result;
/**
- * \brief Sets Compressed Size according to Unpadded Size
+ * \brief Validate and set Compressed Size according to Unpadded Size
*
* Block Header stores Compressed Size, but Index has Unpadded Size. If the
* application has already parsed the Index and is now decoding Blocks,
* it can calculate Compressed Size from Unpadded Size. This function does
- * exactly that with error checking, so application doesn't need to check,
- * for example, if the value in Index is too small to contain even the
- * Block Header. Note that you need to call this function _after_ decoding
- * the Block Header field.
+ * exactly that with error checking:
+ *
+ * - Compressed Size calculated from Unpadded Size must be positive integer,
+ * that is, Unpadded Size must be big enough that after Block Header and
+ * Check fields there's still at least one byte for Compressed Size.
*
- * \return - LZMA_OK: options->compressed_size was set successfully.
+ * - If Compressed Size was present in Block Header, the new value
+ * calculated from Unpadded Size is compared against the value
+ * from Block Header.
+ *
+ * \note This function must be called _after_ decoding the Block Header
+ * field so that it can properly validate Compressed Size if it
+ * was present in Block Header.
+ *
+ * \return - LZMA_OK: block->compressed_size was set successfully.
* - LZMA_DATA_ERROR: unpadded_size is too small compared to
- * options->header_size and lzma_check_sizes[options->check].
+ * block->header_size and lzma_check_size(block->check).
* - LZMA_PROG_ERROR: Some values are invalid. For example,
- * options->header_size must be a multiple of four, and
- * options->header_size between 8 and 1024 inclusive.
+ * block->header_size must be a multiple of four and
+ * between 8 and 1024 inclusive.
*/
extern lzma_ret lzma_block_compressed_size(
- lzma_block *options, lzma_vli unpadded_size)
+ lzma_block *block, lzma_vli unpadded_size)
lzma_attr_warn_unused_result;
/**
- * \brief Calculates Unpadded Size
+ * \brief Calculate Unpadded Size
*
- * This function can be useful after decoding a Block to get Unpadded Size
- * that is stored in Index.
+ * The Index field stores Unpadded Size and Uncompressed Size. The latter
+ * can be taken directly from the lzma_block structure after coding a Block,
+ * but Unpadded Size needs to be calculated from Block Header Size,
+ * Compressed Size, and size of the Check field. This is where this function
+ * is needed.
*
* \return Unpadded Size on success, or zero on error.
*/
-extern lzma_vli lzma_block_unpadded_size(const lzma_block *options)
+extern lzma_vli lzma_block_unpadded_size(const lzma_block *block)
lzma_attr_pure;
/**
- * \brief Calculates the total encoded size of a Block
+ * \brief Calculate the total encoded size of a Block
*
* This is equivalent to lzma_block_unpadded_size() except that the returned
* value includes the size of the Block Padding field.
@@ -255,39 +317,40 @@ extern lzma_vli lzma_block_unpadded_size(const lzma_block *options)
* \return On success, total encoded size of the Block. On error,
* zero is returned.
*/
-extern lzma_vli lzma_block_total_size(const lzma_block *options)
+extern lzma_vli lzma_block_total_size(const lzma_block *block)
lzma_attr_pure;
/**
- * \brief Initializes .lzma Block encoder
+ * \brief Initialize .xz Block encoder
*
- * This function is required for multi-thread encoding. It may also be
- * useful when implementing custom file formats.
+ * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the
+ * filter chain supports it), and LZMA_FINISH.
*
* \return - LZMA_OK: All good, continue with lzma_code().
* - LZMA_MEM_ERROR
* - LZMA_OPTIONS_ERROR
- * - LZMA_UNSUPPORTED_CHECK: options->check specfies a Check
+ * - LZMA_UNSUPPORTED_CHECK: block->check specfies a Check ID
* that is not supported by this buid of liblzma. Initializing
* the encoder failed.
* - LZMA_PROG_ERROR
- *
- * lzma_code() can return FIXME
*/
-extern lzma_ret lzma_block_encoder(lzma_stream *strm, lzma_block *options)
+extern lzma_ret lzma_block_encoder(lzma_stream *strm, lzma_block *block)
lzma_attr_warn_unused_result;
/**
- * \brief Initializes decoder for .lzma Block
+ * \brief Initialize .xz Block decoder
+ *
+ * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using
+ * LZMA_FINISH is not required. It is supported only for convenience.
*
* \return - LZMA_OK: All good, continue with lzma_code().
* - LZMA_UNSUPPORTED_CHECK: Initialization was successful, but
- * the given Check type is not supported, thus Check will be
+ * the given Check ID is not supported, thus Check will be
* ignored.
* - LZMA_PROG_ERROR
* - LZMA_MEM_ERROR
*/
-extern lzma_ret lzma_block_decoder(lzma_stream *strm, lzma_block *options)
+extern lzma_ret lzma_block_decoder(lzma_stream *strm, lzma_block *block)
lzma_attr_warn_unused_result;
diff --git a/src/liblzma/api/lzma/check.h b/src/liblzma/api/lzma/check.h
index 5cba362e..9897e7cb 100644
--- a/src/liblzma/api/lzma/check.h
+++ b/src/liblzma/api/lzma/check.h
@@ -22,11 +22,11 @@
/**
- * \brief Type of the Check
+ * \brief Type of the integrity check (Check ID)
*
- * The .lzma format supports multiple types of Checks that are calculated
- * from the uncompressed data (unless it is empty; then it's calculated
- * from Block Header).
+ * The .xz format supports multiple types of checks that are calculated
+ * from the uncompressed data. They very in both speed and ability to
+ * detect errors.
*/
typedef enum {
LZMA_CHECK_NONE = 0,
@@ -62,11 +62,11 @@ typedef enum {
/**
* \brief Maximum valid Check ID
*
- * The .lzma file format specification specifies eight Check IDs (0-15). Some
+ * The .xz file format specification specifies 16 Check IDs (0-15). Some
* of them are only reserved i.e. no actual Check algorithm has been assigned.
- * Still liblzma accepts any of these eight IDs for future compatibility
- * when decoding files. If a valid but unsupported Check ID is detected,
- * liblzma indicates a warning with LZMA_UNSUPPORTED_CHECK.
+ * Still liblzma accepts any of these IDs for future compatibility when
+ * decoding files. If a valid but unsupported Check ID is detected, liblzma
+ * indicates a warning with LZMA_UNSUPPORTED_CHECK.
*
* FIXME bad desc
*/
@@ -85,18 +85,20 @@ typedef enum {
* Returns true if the given Check ID is supported by this liblzma build.
* Otherwise false is returned. It is safe to call this with a value that
* is not in the range [0, 15]; in that case the return value is always false.
+ *
+ * You can assume that LZMA_CHECK_NONE and LZMA_CHECK_CRC32 are always
+ * supported (even if liblzma is built with limited features).
*/
extern lzma_bool lzma_check_is_supported(lzma_check check)
lzma_attr_const;
/**
- * \brief Get the size of the Check field with given Check ID
+ * \brief Get the size of the Check field with the given Check ID
*
* Although not all Check IDs have a check algorithm associated, the size of
* every Check is already frozen. This function returns the size (in bytes) of
- * the Check field with the specified Check ID. The values are taken from the
- * section 2.1.1.2 of the .lzma file format specification:
+ * the Check field with the specified Check ID. The values are:
* { 0, 4, 4, 4, 8, 8, 8, 16, 16, 16, 32, 32, 32, 64, 64, 64 }
*
* If the argument is not in the range [0, 15], UINT32_MAX is returned.
@@ -134,8 +136,8 @@ extern uint64_t lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc)
/*
- * SHA256 functions are currently not exported to public API.
- * Contact the author if you think it should be.
+ * SHA-256 functions are currently not exported to public API.
+ * Contact Lasse Collin if you think it should be.
*/
diff --git a/src/liblzma/api/lzma/container.h b/src/liblzma/api/lzma/container.h
index ff640a6c..800f2129 100644
--- a/src/liblzma/api/lzma/container.h
+++ b/src/liblzma/api/lzma/container.h
@@ -26,90 +26,78 @@
************/
/**
- * \brief Compression level names for lzma_easy_* functions
+ * \brief Default compression level for easy encoder
*
- * At the moment, all the compression levels support LZMA_SYNC_FLUSH.
- * In future there may be levels that don't support LZMA_SYNC_FLUSH.
- * However, the LZMA_SYNC_FLUSH support won't be removed from the
- * existing compression levels.
+ * It's not straightforward to recommend a default level, because in some
+ * cases keeping the resource usage relatively low is more important that
+ * getting the maximum compression ratio.
+ */
+#define LZMA_EASY_LEVEL_DEFAULT 6
+
+
+/*
+ * Flags for easy encoder
*
- * \note If liblzma is built without encoder support, or with some
- * filters disabled, some of the compression levels may be
- * unsupported. In that case, the initialization functions
- * will return LZMA_OPTIONS_ERROR.
+ * Currently only one flag is defined.
*/
-typedef enum {
- LZMA_EASY_COPY = 0,
- /**<
- * No compression; the data is just wrapped into .lzma
- * container.
- */
-
- LZMA_EASY_LZMA2_1 = 1,
- /**<
- * LZMA2 filter with fast compression (fast in terms of LZMA2).
- * If you are interested in the exact options used, see
- * lzma_lzma_preset(1). Note that the exact options may
- * change between liblzma versions.
- *
- * At the moment, the command line tool uses these settings
- * when `lzma -1' is used. In future, the command line tool
- * may default to some more complex way to determine the
- * settings used e.g. the type of files being compressed.
- *
- * LZMA_EASY_LZMA2_2 is equivalent to lzma_lzma_preset(2)
- * and so on.
- */
-
- LZMA_EASY_LZMA2_2 = 2,
- LZMA_EASY_LZMA2_3 = 3,
- LZMA_EASY_LZMA2_4 = 4,
- LZMA_EASY_LZMA2_5 = 5,
- LZMA_EASY_LZMA2_6 = 6,
- LZMA_EASY_LZMA2_7 = 7,
- LZMA_EASY_LZMA2_8 = 8,
- LZMA_EASY_LZMA2_9 = 9,
-} lzma_easy_level;
+
+/**
+ * Use significantly slower compression to get marginally better compression
+ * ratio. This doesn't affect the memory requirements of the encoder or
+ * decoder. This flag is useful when you don't mind wasting time to get as
+ * small result as possible.
+ *
+ * FIXME: Not implemented yet.
+ */
+#define LZMA_EASY_EXTREME UINT32_C(0x01)
/**
- * \brief Default compression level
+ * \brief Calculate rough memory usage of easy encoder
+ *
+ * This function is a wrapper for lzma_raw_encoder_memusage().
*
- * Data Blocks contain the actual compressed data. It's not straightforward
- * to recommend a default level, because in some cases keeping the resource
- * usage relatively low is more important that getting the maximum
- * compression ratio.
+ * \param level Compression level
+ * \param flags Easy encoder flags (usually zero). This parameter is
+ * needed, because in future some flags may affect the
+ * memory requirements.
*/
-#define LZMA_EASY_DEFAULT LZMA_EASY_LZMA2_7
+extern uint64_t lzma_easy_encoder_memusage(uint32_t level, uint32_t flags)
+ lzma_attr_pure;
/**
- * \brief Calculates rough memory requirements of a compression level
+ * \brief Calculate rough memory usage FIXME
*
- * This function is a wrapper for lzma_memory_usage(), which is declared
- * in filter.h.
+ * This function is a wrapper for lzma_raw_decoder_memusage().
*
- * \return Approximate memory usage of the encoder with the given
- * compression level in mebibytes (value * 1024 * 1024 bytes).
- * On error (e.g. compression level is not supported),
- * UINT32_MAX is returned.
+ * \param level Compression level
+ * \param flags Easy encoder flags (usually zero). This parameter is
+ * needed, because in future some flags may affect the
+ * memory requirements.
*/
-extern uint64_t lzma_easy_memory_usage(lzma_easy_level level)
+extern uint64_t lzma_easy_decoder_memusage(uint32_t level, uint32_t flags)
lzma_attr_pure;
/**
- * \brief Initializes .lzma Stream encoder
+ * \brief Initialize .xz Stream encoder using a preset number
*
* This function is intended for those who just want to use the basic features
- * if liblzma (that is, most developers out there). Lots of assumptions are
- * made, which are correct or at least good enough for most situations.
+ * if liblzma (that is, most developers out there).
*
* \param strm Pointer to lzma_stream that is at least initialized
* with LZMA_STREAM_INIT.
* \param level Compression level to use. This selects a set of
* compression settings from a list of compression
- * presets.
+ * presets. Currently levels from 1 to 9 are defined,
+ * which match the options -1 .. -9 of the xz command
+ * line tool.
+ * \param flags Flags that can finetune the compression preset.
+ * In most cases, no flags are wanted, and this
+ * parameter is zero.
+ * \param check Integrity check type to use. See check.h for available
+ * checks. If you are unsure, use LZMA_CHECK_CRC32.
*
* \return - LZMA_OK: Initialization succeeded. Use lzma_code() to
* encode your data.
@@ -117,18 +105,23 @@ extern uint64_t lzma_easy_memory_usage(lzma_easy_level level)
* previously allocated for *strm is now freed.
* - LZMA_OPTIONS_ERROR: The given compression level is not
* supported by this build of liblzma.
+ * - LZMA_UNSUPPORTED_CHECK: The given check type is not
+ * supported by this liblzma build.
+ * - LZMA_PROG_ERROR: One or more of the parameters have values
+ * that will never be valid. For example, strm == NULL.
*
* If initialization succeeds, use lzma_code() to do the actual encoding.
* Valid values for `action' (the second argument of lzma_code()) are
* LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future,
- * there may be compression levels that don't support LZMA_SYNC_FLUSH.
+ * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH.
*/
-extern lzma_ret lzma_easy_encoder(lzma_stream *strm, lzma_easy_level level)
+extern lzma_ret lzma_easy_encoder(lzma_stream *strm,
+ uint32_t level, uint32_t flags, lzma_check check)
lzma_attr_warn_unused_result;
/**
- * \brief Initializes .lzma Stream encoder
+ * \brief Initialize .xz Stream encoder using a custom filter chain
*
* \param strm Pointer to properly prepared lzma_stream
* \param filters Array of filters. This must be terminated with
@@ -150,19 +143,25 @@ extern lzma_ret lzma_stream_encoder(lzma_stream *strm,
/**
- * \brief Initializes LZMA_Alone (deprecated file format) encoder
+ * \brief Initialize .lzma encoder (legacy file format)
*
- * LZMA_Alone files have the suffix .lzma like the .lzma Stream files.
- * LZMA_Alone format supports only one filter, the LZMA filter. There is
- * no support for integrity checks like CRC32.
+ * The .lzma format is sometimes called the LZMA_Alone format, which is the
+ * reason for the name of this function. The .lzma format supports only the
+ * LZMA1 filter. There is no support for integrity checks like CRC32.
*
- * Use this format if and only if you need to create files readable by
- * legacy LZMA tools such as LZMA Utils 4.32.x.
+ * Use this function if and only if you need to create files readable by
+ * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format
+ * is strongly recommended.
*
- * LZMA_Alone encoder doesn't support LZMA_SYNC_FLUSH or LZMA_FULL_FLUSH.
+ * FIXME: Dictionary size limit?
+ *
+ * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * No kind of flushing is supported, because the file format doesn't make
+ * it possible.
*
* \return - LZMA_OK
* - LZMA_MEM_ERROR
+ * - LZMA_OPTIONS_ERROR // FIXME
* - LZMA_PROG_ERROR
*/
extern lzma_ret lzma_alone_encoder(
@@ -177,7 +176,7 @@ extern lzma_ret lzma_alone_encoder(
/**
* This flag makes lzma_code() return LZMA_NO_CHECK if the input stream
* being decoded has no integrity check. Note that when used with
- * lzma_auto_decoder(), all LZMA_Alone files will trigger LZMA_NO_CHECK
+ * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK
* if LZMA_TELL_NO_CHECK is used.
*/
#define LZMA_TELL_NO_CHECK UINT32_C(0x01)
@@ -203,8 +202,8 @@ extern lzma_ret lzma_alone_encoder(
/**
* This flag enables decoding of concatenated files with file formats that
* allow concatenating compressed files as is. From the formats currently
- * supported by liblzma, only the new .lzma format allows concatenated files.
- * Concatenated files are not allowed with the LZMA_Alone format.
+ * supported by liblzma, only the .xz format allows concatenated files.
+ * Concatenated files are not allowed with the legacy .lzma format.
*
* This flag also affects the usage of the `action' argument for lzma_code().
* When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END
@@ -218,7 +217,7 @@ extern lzma_ret lzma_alone_encoder(
/**
- * \brief Initializes decoder for .lzma Stream
+ * \brief Initialize .xz Stream decoder
*
* \param strm Pointer to properly prepared lzma_stream
* \param memlimit Rough memory usage limit as bytes
@@ -233,13 +232,13 @@ extern lzma_ret lzma_stream_decoder(
/**
- * \brief Decode .lzma Streams and LZMA_Alone files with autodetection
+ * \brief Decode .xz Streams and .lzma files with autodetection
*
- * Autodetects between the .lzma Stream and LZMA_Alone formats, and
+ * This decoder autodetects between the .xz and .lzma file formats, and
* calls lzma_stream_decoder() or lzma_alone_decoder() once the type
- * of the file has been detected.
+ * of the input file has been detected.
*
- * \param strm Pointer to propertily prepared lzma_stream
+ * \param strm Pointer to properly prepared lzma_stream
* \param memlimit Rough memory usage limit as bytes
* \param flags Bitwise-or of flags, or zero for no flags.
*
@@ -253,7 +252,7 @@ extern lzma_ret lzma_auto_decoder(
/**
- * \brief Initializes decoder for LZMA_Alone file
+ * \brief Initializes decoder for .lzma file
*
* Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH.
* There is no need to use LZMA_FINISH, but allowing it may simplify
diff --git a/src/liblzma/api/lzma/delta.h b/src/liblzma/api/lzma/delta.h
index bdb5b926..963c7c0f 100644
--- a/src/liblzma/api/lzma/delta.h
+++ b/src/liblzma/api/lzma/delta.h
@@ -64,12 +64,12 @@ typedef struct {
# define LZMA_DELTA_DIST_MIN 1
# define LZMA_DELTA_DIST_MAX 256
- /**
- * \brief Reserved space for possible future extensions
- *
- * You should not touch these, because the names of these variables
- * may change. These are and will never be used when type is
- * LZMA_DELTA_TYPE_BYTE, so it is safe to leave these uninitialized.
+ /*
+ * Reserved space to allow possible future extensions without
+ * breaking the ABI. You should not touch these, because the names
+ * of these variables may change. These are and will never be used
+ * when type is LZMA_DELTA_TYPE_BYTE, so it is safe to leave these
+ * uninitialized.
*/
uint32_t reserved_int1;
uint32_t reserved_int2;
diff --git a/src/liblzma/api/lzma/filter.h b/src/liblzma/api/lzma/filter.h
index b4fb02a7..05c0c77b 100644
--- a/src/liblzma/api/lzma/filter.h
+++ b/src/liblzma/api/lzma/filter.h
@@ -22,10 +22,27 @@
/**
+ * \brief Maximum number of filters in a chain
+ *
+ * A filter chain can have 1-4 filters, of which three are allowed to change
+ * the size of the data. Usually only one or two filters are needed.
+ */
+#define LZMA_FILTERS_MAX 4
+
+
+/**
* \brief Filter options
*
* This structure is used to pass Filter ID and a pointer filter's options
- * to liblzma.
+ * to liblzma. An array of lzma_filter structures is used to define a filter
+ * chain.
+ *
+ * A filter chain is indicated with an array of lzma_filter structures.
+ * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter array
+ * must have LZMA_FILTERS_MAX + 1 elements (that is, five) to be able to hold
+ * any arbitrary filter chain. This is important when using
+ * lzma_block_header_decode() from block.h, because too small array would
+ * make liblzma write past the end of the filters array.
*/
typedef struct {
/**
@@ -55,14 +72,6 @@ typedef struct {
/**
- * \brief Maximum number of filters in a chain
- *
- * FIXME desc
- */
-#define LZMA_FILTERS_MAX 4
-
-
-/**
* \brief Test if the given Filter ID is supported for encoding
*
* Returns true if the give Filter ID is supported for encoding by this
diff --git a/src/liblzma/api/lzma/index.h b/src/liblzma/api/lzma/index.h
index d6072614..9d6b7550 100644
--- a/src/liblzma/api/lzma/index.h
+++ b/src/liblzma/api/lzma/index.h
@@ -1,6 +1,6 @@
/**
* \file lzma/index.h
- * \brief Handling of Index lists
+ * \brief Handling of .xz Index lists
*
* \author Copyright (C) 1999-2006 Igor Pavlov
* \author Copyright (C) 2007 Lasse Collin
@@ -69,6 +69,25 @@ typedef struct {
/**
+ * \brief Calculate memory usage for Index with given number of Records
+ *
+ * On disk, the size of the Index field depends on both the number of Records
+ * stored and how big values the Records store (due to variable-length integer
+ * encoding). When the Index is kept in lzma_index structure, the memory usage
+ * depends only on the number of Records stored in the Index. The size in RAM
+ * is almost always a lot bigger than in encoded form on disk.
+ *
+ * This function calculates an approximate amount of memory needed hold the
+ * given number of Records in lzma_index structure. This value may vary
+ * between liblzma versions if the internal implementation is modified.
+ *
+ * If you want to know how much memory an existing lzma_index structure is
+ * using, use lzma_index_memusage(lzma_index_count(i)).
+ */
+extern uint64_t lzma_index_memusage(lzma_vli record_count);
+
+
+/**
* \brief Allocate and initialize a new lzma_index structure
*
* If i is NULL, a new lzma_index structure is allocated, initialized,
@@ -76,7 +95,7 @@ typedef struct {
*
* If i is non-NULL, it is reinitialized and the same pointer returned.
* In this case, return value cannot be NULL or a different pointer than
- * the i given as argument.
+ * the i that was given as an argument.
*/
extern lzma_index *lzma_index_init(lzma_index *i, lzma_allocator *allocator)
lzma_attr_warn_unused_result;
@@ -84,6 +103,8 @@ extern lzma_index *lzma_index_init(lzma_index *i, lzma_allocator *allocator)
/**
* \brief Deallocate the Index
+ *
+ * If i is NULL, this does nothing.
*/
extern void lzma_index_end(lzma_index *i, lzma_allocator *allocator);
@@ -91,14 +112,20 @@ extern void lzma_index_end(lzma_index *i, lzma_allocator *allocator);
/**
* \brief Add a new Record to an Index
*
- * \param index Pointer to a lzma_index structure
- * \param unpadded_size Unpadded Size of a Block
- * \param uncompressed_size Uncompressed Size of a Block, or
- * LZMA_VLI_UNKNOWN to indicate padding.
+ * \param i Pointer to a lzma_index structure
+ * \param allocator Pointer to lzma_allocator, or NULL to
+ * use malloc()
+ * \param unpadded_size Unpadded Size of a Block. This can be
+ * calculated with lzma_block_unpadded_size()
+ * after encoding or decoding the Block.
+ * \param uncompressed_size Uncompressed Size of a Block. This can be
+ * taken directly from lzma_block structure
+ * after encoding or decoding the Block.
*
* Appending a new Record does not affect the read position.
*
* \return - LZMA_OK
+ * - LZMA_MEM_ERROR
* - LZMA_DATA_ERROR: Compressed or uncompressed size of the
* Stream or size of the Index field would grow too big.
* - LZMA_PROG_ERROR
@@ -117,7 +144,7 @@ extern lzma_vli lzma_index_count(const lzma_index *i) lzma_attr_pure;
/**
* \brief Get the size of the Index field as bytes
*
- * This is needed to verify the Index Size field from the Stream Footer.
+ * This is needed to verify the Backward Size field in the Stream Footer.
*/
extern lzma_vli lzma_index_size(const lzma_index *i) lzma_attr_pure;
@@ -145,7 +172,8 @@ extern lzma_vli lzma_index_stream_size(const lzma_index *i) lzma_attr_pure;
*
* When no Indexes have been combined with lzma_index_cat(), this function is
* identical to lzma_index_stream_size(). If multiple Indexes have been
- * combined, this includes also the possible Stream Padding fields.
+ * combined, this includes also the headers of each separate Stream and the
+ * possible Stream Padding fields.
*/
extern lzma_vli lzma_index_file_size(const lzma_index *i) lzma_attr_pure;
@@ -181,7 +209,8 @@ extern void lzma_index_rewind(lzma_index *i);
*
* \param i Pointer to lzma_index structure
* \param record Pointer to a structure to hold the search results
- * \param target Uncompressed target offset
+ * \param target Uncompressed target offset which the caller would
+ * like to locate from the Stream
*
* If the target is smaller than the uncompressed size of the Stream (can be
* checked with lzma_index_uncompressed_size()):
@@ -204,13 +233,15 @@ extern lzma_bool lzma_index_locate(
*
*
*
- * \param dest Destination Index after which src is appended Source
- * \param src Index. The memory allocated for this is either moved
- * to be part of *dest or freed iff the function call
- * succeeds, and src will be an invalid pointer.
+ * \param dest Destination Index after which src is appended
+ * \param src Source Index. The memory allocated for this is
+ * either moved to be part of *dest or freed if and
+ * only if the function call succeeds, and src will
+ * be an invalid pointer.
* \param allocator Custom memory allocator; can be NULL to use
* malloc() and free().
* \param padding Size of the Stream Padding field between Streams.
+ * This must be a multiple of four.
*
* \return - LZMA_OK: Indexes concatenated successfully.
* - LZMA_DATA_ERROR: *dest would grow too big.
@@ -226,6 +257,8 @@ extern lzma_ret lzma_index_cat(lzma_index *lzma_restrict dest,
/**
* \brief Duplicates an Index list
*
+ * Makes an identical copy of the Index. Also the read position is copied.
+ *
* \return A copy of the Index, or NULL if memory allocation failed.
*/
extern lzma_index *lzma_index_dup(
@@ -235,6 +268,8 @@ extern lzma_index *lzma_index_dup(
/**
* \brief Compares if two Index lists are identical
+ *
+ * \return True if *a and *b are equal, false otherwise.
*/
extern lzma_bool lzma_index_equal(const lzma_index *a, const lzma_index *b)
lzma_attr_pure;
@@ -242,6 +277,17 @@ extern lzma_bool lzma_index_equal(const lzma_index *a, const lzma_index *b)
/**
* \brief Initializes Index encoder
+ *
+ * \param strm Pointer to properly prepared lzma_stream
+ * \param i Pointer to lzma_index which should be encoded.
+ * The read position will be at the end of the Index
+ * after lzma_code() has returned LZMA_STREAM_END.
+ *
+ * The only valid action value for lzma_code() is LZMA_RUN.
+ *
+ * \return - LZMA_OK: Initialization succeeded, continue with lzma_code().
+ * - LZMA_MEM_ERROR
+ * - LZMA_PROG_ERROR
*/
extern lzma_ret lzma_index_encoder(lzma_stream *strm, lzma_index *i)
lzma_attr_warn_unused_result;
@@ -249,6 +295,29 @@ extern lzma_ret lzma_index_encoder(lzma_stream *strm, lzma_index *i)
/**
* \brief Initializes Index decoder
+ *
+ * \param strm Pointer to properly prepared lzma_stream
+ * \param i Pointer to a pointer that will be made to point
+ * to the final decoded Index once lzma_code() has
+ * returned LZMA_STREAM_END. That is,
+ * lzma_index_decoder() takes care of allocating
+ * a new lzma_index structure.
+ * \param memlimit How much memory the resulting Index is allowed
+ * to require.
+ *
+ * The only valid action value for lzma_code() is LZMA_RUN.
+ *
+ * \return - LZMA_OK: Initialization succeeded, continue with lzma_code().
+ * - LZMA_MEM_ERROR
+ * - LZMA_MEMLIMIT_ERROR
+ * - LZMA_PROG_ERROR
+ *
+ * \note The memory usage limit is checked early in the decoding
+ * (within the first dozen input bytes or so). The actual memory
+ * is allocated later in smaller pieces. If the memory usage
+ * limit is modified after decoding a part of the Index already,
+ * the new limit may be ignored.
*/
-extern lzma_ret lzma_index_decoder(lzma_stream *strm, lzma_index **i)
+extern lzma_ret lzma_index_decoder(
+ lzma_stream *strm, lzma_index **i, uint64_t memlimit)
lzma_attr_warn_unused_result;
diff --git a/src/liblzma/api/lzma/index_hash.h b/src/liblzma/api/lzma/index_hash.h
index 001e6b5c..6ebbe9fb 100644
--- a/src/liblzma/api/lzma/index_hash.h
+++ b/src/liblzma/api/lzma/index_hash.h
@@ -39,7 +39,7 @@ typedef struct lzma_index_hash_s lzma_index_hash;
*
* If index_hash is non-NULL, it is reinitialized and the same pointer
* returned. In this case, return value cannot be NULL or a different
- * pointer than the index_hash given as argument.
+ * pointer than the index_hash that was given as an argument.
*/
extern lzma_index_hash *lzma_index_hash_init(
lzma_index_hash *index_hash, lzma_allocator *allocator)
@@ -47,7 +47,7 @@ extern lzma_index_hash *lzma_index_hash_init(
/**
- * \brief Deallocate the Index hash
+ * \brief Deallocate lzma_index_hash structure
*/
extern void lzma_index_hash_end(
lzma_index_hash *index_hash, lzma_allocator *allocator);
@@ -72,17 +72,29 @@ extern lzma_ret lzma_index_hash_append(lzma_index_hash *index_hash,
/**
- * \brief Decode the Index field
+ * \brief Decode and validate the Index field
+ *
+ * After telling the sizes of all Blocks with lzma_index_hash_append(),
+ * the actual Index field is decoded with this function. Specifically,
+ * once decoding of the Index field has been started, no more Records
+ * can be added using lzma_index_hash_append().
+ *
+ * This function doesn't use lzma_stream structure to pass the input data.
+ * Instead, the input buffer is specified using three arguments. This is
+ * because it matches better the internal APIs of liblzma.
+ *
+ * \param index_hash Pointer to a lzma_index_hash structure
+ * \param in Pointer to the beginning of the input buffer
+ * \param in_pos in[*in_pos] is the next byte to process
+ * \param in_size in[in_size] is the first byte not to process
*
* \return - LZMA_OK: So far good, but more input is needed.
* - LZMA_STREAM_END: Index decoded successfully and it matches
* the Records given with lzma_index_hash_append().
* - LZMA_DATA_ERROR: Index is corrupt or doesn't match the
* information given with lzma_index_hash_append().
+ * - LZMA_BUF_ERROR: Cannot progress because *in_pos >= in_size.
* - LZMA_PROG_ERROR
- *
- * \note Once decoding of the Index field has been started, no more
- * Records can be added using lzma_index_hash_append().
*/
extern lzma_ret lzma_index_hash_decode(lzma_index_hash *index_hash,
const uint8_t *in, size_t *in_pos, size_t in_size)
@@ -92,7 +104,7 @@ extern lzma_ret lzma_index_hash_decode(lzma_index_hash *index_hash,
/**
* \brief Get the size of the Index field as bytes
*
- * This is needed to verify the Index Size field from the Stream Footer.
+ * This is needed to verify the Backward Size field in the Stream Footer.
*/
extern lzma_vli lzma_index_hash_size(const lzma_index_hash *index_hash)
lzma_attr_pure;
diff --git a/src/liblzma/api/lzma/init.h b/src/liblzma/api/lzma/init.h
index a2130ef5..9195e752 100644
--- a/src/liblzma/api/lzma/init.h
+++ b/src/liblzma/api/lzma/init.h
@@ -44,7 +44,7 @@
* functions, you may use other initialization functions, which initialize
* only a subset of liblzma's internal static variables. Using those
* functions have the following advantages:
- * - When linking statically against liblzma, less useless functions will
+ * - When linking statically against liblzma, fewer useless functions will
* get linked into the binary. E.g. if you need only the decoder functions,
* using lzma_init_decoder() avoids linking bunch of encoder related code.
* - There is less things to initialize, making the initialization
diff --git a/src/liblzma/api/lzma/lzma.h b/src/liblzma/api/lzma/lzma.h
index 5ec563dd..e3db236b 100644
--- a/src/liblzma/api/lzma/lzma.h
+++ b/src/liblzma/api/lzma/lzma.h
@@ -370,12 +370,12 @@ typedef struct {
*/
uint32_t depth;
- /**
- * \brief Reserved space for possible future extensions
- *
- * You should not touch these, because the names of these variables
- * may change. These are and will never be used with the currently
- * supported options, so it is safe to leave these uninitialized.
+ /*
+ * Reserved space to allow possible future extensions without
+ * breaking the ABI. You should not touch these, because the names
+ * of these variables may change. These are and will never be used
+ * with the currently supported options, so it is safe to leave these
+ * uninitialized.
*/
uint32_t reserved_int1;
uint32_t reserved_int2;
diff --git a/src/liblzma/api/lzma/simple.h b/src/liblzma/api/lzma/simple.h
index 98f3f49a..6969ffa9 100644
--- a/src/liblzma/api/lzma/simple.h
+++ b/src/liblzma/api/lzma/simple.h
@@ -86,8 +86,8 @@ typedef struct {
* of the cross-section branch/call/jump instructions will use the
* same absolute addresses as in the first section.
*
- * When the pointer to options is NULL, the default value is used.
- * The default value is zero.
+ * When the pointer to options is NULL, the default value (zero)
+ * is used.
*/
uint32_t start_offset;
diff --git a/src/liblzma/api/lzma/stream_flags.h b/src/liblzma/api/lzma/stream_flags.h
index 44c68616..29d73040 100644
--- a/src/liblzma/api/lzma/stream_flags.h
+++ b/src/liblzma/api/lzma/stream_flags.h
@@ -1,6 +1,6 @@
/**
* \file lzma/stream_flags.h
- * \brief .lzma Stream Header and Stream Footer encoder and decoder
+ * \brief .xz Stream Header and Stream Footer encoder and decoder
*
* \author Copyright (C) 1999-2006 Igor Pavlov
* \author Copyright (C) 2007 Lasse Collin
@@ -25,7 +25,7 @@
* \brief Size of Stream Header and Stream Footer
*
* Stream Header and Stream Footer have the same size and they are not
- * going to change even if a newer version of the .lzma file format is
+ * going to change even if a newer version of the .xz file format is
* developed in future.
*/
#define LZMA_STREAM_HEADER_SIZE 12
@@ -55,8 +55,10 @@ typedef struct {
uint32_t version;
/**
+ * \brief Backward Size
+ *
* Backward Size must be a multiple of four bytes. In this Stream
- * format version Backward Size is the size of the Index field.
+ * format version, Backward Size is the size of the Index field.
*
* Backward Size isn't actually part of the Stream Flags field, but
* it is convenient to include in this structure anyway. Backward
@@ -73,11 +75,14 @@ typedef struct {
# define LZMA_BACKWARD_SIZE_MAX (LZMA_VLI_C(1) << 34)
/**
- * Type of the Check calculated from uncompressed data
+ * \brief Check ID
+ *
+ * This indicates the type of the integrity check calculated from
+ * uncompressed data.
*/
lzma_check check;
- /**
+ /*
* Reserved space to allow possible future extensions without
* breaking the ABI. You should not touch these, because the
* names of these variables may change.
@@ -111,11 +116,11 @@ typedef struct {
/**
* \brief Encode Stream Header
*
- * \param out Beginning of the output buffer of
- * LZMA_STREAM_HEADER_SIZE bytes.
* \param options Stream Header options to be encoded.
- * options->index_size is ignored and doesn't
+ * options->backward_size is ignored and doesn't
* need to be initialized.
+ * \param out Beginning of the output buffer of
+ * LZMA_STREAM_HEADER_SIZE bytes.
*
* \return - LZMA_OK: Encoding was successful.
* - LZMA_OPTIONS_ERROR: options->version is not supported by
@@ -130,9 +135,9 @@ extern lzma_ret lzma_stream_header_encode(
/**
* \brief Encode Stream Footer
*
+ * \param options Stream Footer options to be encoded.
* \param out Beginning of the output buffer of
* LZMA_STREAM_HEADER_SIZE bytes.
- * \param options Stream Footer options to be encoded.
*
* \return - LZMA_OK: Encoding was successful.
* - LZMA_OPTIONS_ERROR: options->version is not supported by
@@ -151,7 +156,7 @@ extern lzma_ret lzma_stream_footer_encode(
* \param in Beginning of the input buffer of
* LZMA_STREAM_HEADER_SIZE bytes.
*
- * options->index_size is always set to LZMA_VLI_UNKNOWN. This is to
+ * options->backward_size is always set to LZMA_VLI_UNKNOWN. This is to
* help comparing Stream Flags from Stream Header and Stream Footer with
* lzma_stream_flags_compare().
*
@@ -162,6 +167,17 @@ extern lzma_ret lzma_stream_footer_encode(
* is corrupt.
* - LZMA_OPTIONS_ERROR: Unsupported options are present
* in the header.
+ *
+ * \note When decoding .xz files that contain multiple Streams, it may
+ * make sense to print "file format not recognized" only if
+ * decoding of the Stream Header of the _first_ Stream gives
+ * LZMA_FORMAT_ERROR. If non-first Stream Header gives
+ * LZMA_FORMAT_ERROR, the message used for LZMA_DATA_ERROR is
+ * probably more appropriate.
+ *
+ * For example, Stream decoder in liblzma uses LZMA_DATA_ERROR if
+ * LZMA_FORMAT_ERROR is returned by lzma_stream_header_decode()
+ * when decoding non-first Stream.
*/
extern lzma_ret lzma_stream_header_decode(
lzma_stream_flags *options, const uint8_t *in)
@@ -178,17 +194,17 @@ extern lzma_ret lzma_stream_header_decode(
* \return - LZMA_OK: Decoding was successful.
* - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given
* buffer cannot be Stream Footer.
- * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the footer
+ * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the Stream Footer
* is corrupt.
* - LZMA_OPTIONS_ERROR: Unsupported options are present
- * in the footer.
+ * in Stream Footer.
*
* \note If Stream Header was already decoded successfully, but
* decoding Stream Footer returns LZMA_FORMAT_ERROR, the
* application should probably report some other error message
- * than "unsupported file format", since the file more likely is
- * corrupt (possibly truncated). Stream decoder in liblzma uses
- * LZMA_DATA_ERROR in this situation.
+ * than "file format not recognized", since the file more likely
+ * is corrupt (possibly truncated). Stream decoder in liblzma
+ * uses LZMA_DATA_ERROR in this situation.
*/
extern lzma_ret lzma_stream_footer_decode(
lzma_stream_flags *options, const uint8_t *in)
diff --git a/src/liblzma/api/lzma/version.h b/src/liblzma/api/lzma/version.h
index a296f450..2a36120e 100644
--- a/src/liblzma/api/lzma/version.h
+++ b/src/liblzma/api/lzma/version.h
@@ -30,10 +30,10 @@
* - zzz = revision
* - s indicates stability: 0 = alpha, 1 = beta, 2 = stable
*
- * See the README file for details about the version numbering.
+ * See the README file for details about the version numbering. FIXME
*
- * \note The version number of LZMA Utils (and thus liblzma)
- * has nothing to with the version number of LZMA SDK.
+ * \note The version number of liblzma has nothing to with
+ * the version number of Igor Pavlov's LZMA SDK.
*/
#define LZMA_VERSION UINT32_C(49990060)
diff --git a/src/liblzma/api/lzma/vli.h b/src/liblzma/api/lzma/vli.h
index 1b13f865..caca204b 100644
--- a/src/liblzma/api/lzma/vli.h
+++ b/src/liblzma/api/lzma/vli.h
@@ -48,8 +48,7 @@
*
* This will always be unsigned integer. Valid VLI values are in the range
* [0, LZMA_VLI_MAX]. Unknown value is indicated with LZMA_VLI_UNKNOWN,
- * which is the maximum value of the underlaying integer type (this feature
- * is useful in several situations).
+ * which is the maximum value of the underlaying integer type.
*
* In future, even if lzma_vli is typdefined to something else than uint64_t,
* it is guaranteed that 2 * LZMA_VLI_MAX will not overflow lzma_vli.
@@ -74,9 +73,9 @@ typedef uint64_t lzma_vli;
/**
* \brief Encodes variable-length integer
*
- * In the .lzma format, most integers are encoded in variable-length
- * representation. This saves space when smaller values are more likely
- * than bigger values.
+ * In the .xz format, most integers are encoded in a variable-length
+ * representation, which is sometimes called little endian base-128 encoding.
+ * This saves space when smaller values are more likely than bigger values.
*
* The encoding scheme encodes seven bits to every byte, using minimum
* number of bytes required to represent the given value. Encodings that use
@@ -118,8 +117,7 @@ typedef uint64_t lzma_vli;
* - LZMA_BUF_ERROR: No output space was provided.
* - LZMA_PROG_ERROR: Arguments are not sane.
*/
-extern lzma_ret lzma_vli_encode(
- lzma_vli vli, size_t *lzma_restrict vli_pos,
+extern lzma_ret lzma_vli_encode(lzma_vli vli, size_t *lzma_restrict vli_pos,
uint8_t *lzma_restrict out, size_t *lzma_restrict out_pos,
size_t out_size);
@@ -165,10 +163,9 @@ extern lzma_ret lzma_vli_decode(lzma_vli *lzma_restrict vli,
/**
- * \brief Gets the number of bytes required to encode vli
+ * \brief Get the number of bytes required to encode a VLI
*
* \return Number of bytes on success (1-9). If vli isn't valid,
* zero is returned.
*/
-extern uint32_t lzma_vli_size(lzma_vli vli)
- lzma_attr_pure;
+extern uint32_t lzma_vli_size(lzma_vli vli) lzma_attr_pure;