diff options
Diffstat (limited to 'po/zh_TW.po')
| -rw-r--r-- | po/zh_TW.po | 956 |
1 files changed, 956 insertions, 0 deletions
diff --git a/po/zh_TW.po b/po/zh_TW.po new file mode 100644 index 00000000..52c2fa8e --- /dev/null +++ b/po/zh_TW.po @@ -0,0 +1,956 @@ +# Chinese translations for xz package. +# This file is put in the public domain. +# +# pan93412 <pan93412@gmail.com>, 2019. +msgid "" +msgstr "" +"Project-Id-Version: xz 5.2.4\n" +"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n" +"POT-Creation-Date: 2018-04-29 18:19+0300\n" +"PO-Revision-Date: 2019-04-23 22:00+0800\n" +"Last-Translator: pan93412 <pan93412@gmail.com>\n" +"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n" +"Language: zh_TW\n" +"X-Bugs: Report translation errors to the Language-Team address.\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" +"X-Generator: Poedit 2.2.1\n" +"X-Poedit-SourceCharset: UTF-8\n" + +#: src/xz/args.c:63 +#, c-format +msgid "%s: Invalid argument to --block-list" +msgstr "%s：傳入 --block-list 的參數無效" + +#: src/xz/args.c:73 +#, c-format +msgid "%s: Too many arguments to --block-list" +msgstr "%s：傳入 --block-list 的參數過多" + +#: src/xz/args.c:102 +msgid "0 can only be used as the last element in --block-list" +msgstr "0 只能作為 --block-list 的最後一個元素" + +#: src/xz/args.c:406 +#, c-format +msgid "%s: Unknown file format type" +msgstr "%s：未知檔案格式類型" + +#: src/xz/args.c:429 src/xz/args.c:437 +#, c-format +msgid "%s: Unsupported integrity check type" +msgstr "%s：不支援的完整性檢查類型" + +#: src/xz/args.c:473 +msgid "Only one file can be specified with `--files' or `--files0'." +msgstr "「--files」或「--files0」只能指定一個檔案。" + +#: src/xz/args.c:541 +#, c-format +msgid "The environment variable %s contains too many arguments" +msgstr "%s 環境變數包含過多參數" + +#: src/xz/args.c:643 +msgid "Compression support was disabled at build time" +msgstr "已在編譯時停用壓縮支援" + +#: src/xz/args.c:650 +msgid "Decompression support was disabled at build time" +msgstr "已在編譯時停用解壓縮支援" + +#: src/xz/coder.c:110 +msgid "Maximum number of filters is four" +msgstr "最多只能指定 4 個篩選器" + +#: src/xz/coder.c:129 +msgid "Memory usage limit is too low for the given filter setup." +msgstr "記憶體用量限制過低，不足以設定指定的篩選器。" + +#: src/xz/coder.c:159 +msgid "Using a preset in raw mode is discouraged." +msgstr "不建議在 Raw 模式使用設定檔。" + +#: src/xz/coder.c:161 +msgid "The exact options of the presets may vary between software versions." +msgstr "設定檔的選項可能因軟體版本而有異。" + +#: src/xz/coder.c:184 +msgid "The .lzma format supports only the LZMA1 filter" +msgstr ".lzma 格式僅支援 LZMA1 篩選器" + +#: src/xz/coder.c:192 +msgid "LZMA1 cannot be used with the .xz format" +msgstr "LZMA1 不能與 .xz 格式一同使用" + +#: src/xz/coder.c:209 +msgid "The filter chain is incompatible with --flush-timeout" +msgstr "篩選鏈不相容 --flush-timeout" + +#: src/xz/coder.c:215 +msgid "Switching to single-threaded mode due to --flush-timeout" +msgstr "因指定 --flush-timeout，因此切換到單執行緒模式" + +#: src/xz/coder.c:235 +#, c-format +msgid "Using up to %<PRIu32> threads." +msgstr "使用最多 %<PRIu32> 個執行緒。" + +#: src/xz/coder.c:251 +msgid "Unsupported filter chain or filter options" +msgstr "不支援的篩選鏈或篩選器選項" + +#: src/xz/coder.c:263 +#, c-format +msgid "Decompression will need %s MiB of memory." +msgstr "解壓縮將需要 %s MiB 的記憶體。" + +#: src/xz/coder.c:300 +#, c-format +msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB" +msgstr "已將 %s 個執行緒調整至 %s，以不超過記憶體用量的 %s MiB 限制" + +#: src/xz/coder.c:354 +#, c-format +msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB" +msgstr "已將 LZMA%c 的字典大小從 %s MiB 調整至 %s MiB，以不超過記憶體用量的 %s MiB 限制" + +#: src/xz/file_io.c:110 src/xz/file_io.c:118 +#, c-format +msgid "Error creating a pipe: %s" +msgstr "建立管線時發生錯誤：%s" + +#: src/xz/file_io.c:173 +msgid "Sandbox is disabled due to incompatible command line arguments" +msgstr "由於指定不相容的指令列參數，已停用沙盒" + +#: src/xz/file_io.c:216 +msgid "Sandbox was successfully enabled" +msgstr "已成功啟用沙盒" + +#: src/xz/file_io.c:220 +msgid "Failed to enable the sandbox" +msgstr "無法啟用沙盒" + +#: src/xz/file_io.c:262 +#, c-format +msgid "%s: poll() failed: %s" +msgstr "%s：poll() 失敗：%s" + +#. TRANSLATORS: When compression or decompression finishes, +#. and xz is going to remove the source file, xz first checks +#. if the source file still exists, and if it does, does its +#. device and inode numbers match what xz saw when it opened +#. the source file. If these checks fail, this message is +#. shown, %s being the filename, and the file is not deleted. +#. The check for device and inode numbers is there, because +#. it is possible that the user has put a new file in place +#. of the original file, and in that case it obviously +#. shouldn't be removed. +#: src/xz/file_io.c:332 +#, c-format +msgid "%s: File seems to have been moved, not removing" +msgstr "%s：檔案似乎已經遷移，不移除" + +#: src/xz/file_io.c:339 src/xz/file_io.c:878 +#, c-format +msgid "%s: Cannot remove: %s" +msgstr "%s：無法移除：%s" + +#: src/xz/file_io.c:364 +#, c-format +msgid "%s: Cannot set the file owner: %s" +msgstr "%s：無法設定檔案所有者：%s" + +#: src/xz/file_io.c:370 +#, c-format +msgid "%s: Cannot set the file group: %s" +msgstr "%s：無法設定檔案群組：%s" + +#: src/xz/file_io.c:389 +#, c-format +msgid "%s: Cannot set the file permissions: %s" +msgstr "%s：無法設定檔案權限：%s" + +#: src/xz/file_io.c:515 +#, c-format +msgid "Error getting the file status flags from standard input: %s" +msgstr "從標準輸入取得檔案狀態旗標時發生錯誤：%s" + +#: src/xz/file_io.c:572 src/xz/file_io.c:634 +#, c-format +msgid "%s: Is a symbolic link, skipping" +msgstr "%s：是個符號連結，跳過" + +#: src/xz/file_io.c:663 +#, c-format +msgid "%s: Is a directory, skipping" +msgstr "%s：是個目錄，跳過" + +#: src/xz/file_io.c:669 +#, c-format +msgid "%s: Not a regular file, skipping" +msgstr "%s：不是一般檔案，跳過" + +#: src/xz/file_io.c:686 +#, c-format +msgid "%s: File has setuid or setgid bit set, skipping" +msgstr "%s：檔案已設定 setuid 或 setgid 位元，跳過" + +#: src/xz/file_io.c:693 +#, c-format +msgid "%s: File has sticky bit set, skipping" +msgstr "%s：檔案已設定黏性位元（sticky bit），跳過" + +#: src/xz/file_io.c:700 +#, c-format +msgid "%s: Input file has more than one hard link, skipping" +msgstr "%s：輸入檔有超過一個實際連結 (hard link)，跳過" + +#: src/xz/file_io.c:788 +#, c-format +msgid "Error restoring the status flags to standard input: %s" +msgstr "將狀態旗標還原到標準輸入時發生錯誤：%s" + +#: src/xz/file_io.c:836 +#, c-format +msgid "Error getting the file status flags from standard output: %s" +msgstr "從標準輸出取得檔案狀態旗標時發生錯誤：%s" + +#: src/xz/file_io.c:1014 +#, c-format +msgid "Error restoring the O_APPEND flag to standard output: %s" +msgstr "將 O_APPEND 旗標還原到標準輸出時發生錯誤：%s" + +#: src/xz/file_io.c:1026 +#, c-format +msgid "%s: Closing the file failed: %s" +msgstr "%s：關閉檔案失敗：%s" + +#: src/xz/file_io.c:1062 src/xz/file_io.c:1288 +#, c-format +msgid "%s: Seeking failed when trying to create a sparse file: %s" +msgstr "%s：嘗試建立疏鬆檔案時發生搜尋失敗：%s" + +#: src/xz/file_io.c:1157 +#, c-format +msgid "%s: Read error: %s" +msgstr "%s：讀取時發生錯誤：%s" + +#: src/xz/file_io.c:1177 +#, c-format +msgid "%s: Error seeking the file: %s" +msgstr "%s：搜尋檔案時發生錯誤：%s" + +#: src/xz/file_io.c:1187 +#, c-format +msgid "%s: Unexpected end of file" +msgstr "%s：非期望的檔案結尾" + +#: src/xz/file_io.c:1246 +#, c-format +msgid "%s: Write error: %s" +msgstr "%s：寫入時發生錯誤：%s" + +#: src/xz/hardware.c:107 +msgid "Disabled" +msgstr "已停用" + +#. TRANSLATORS: Test with "xz --info-memory" to see if +#. the alignment looks nice. +#: src/xz/hardware.c:126 +msgid "Total amount of physical memory (RAM): " +msgstr "實體記憶體 (RAM) 總量：" + +#: src/xz/hardware.c:128 +msgid "Memory usage limit for compression: " +msgstr "壓縮記憶體限制： " + +#: src/xz/hardware.c:130 +msgid "Memory usage limit for decompression: " +msgstr "解壓縮記憶體限制： " + +#. TRANSLATORS: Indicates that there is no integrity check. +#. This string is used in tables, so the width must not +#. exceed ten columns with a fixed-width font. +#: src/xz/list.c:65 +msgid "None" +msgstr "無" + +#. TRANSLATORS: Indicates that integrity check name is not known, +#. but the Check ID is known (here 2). This and other "Unknown-N" +#. strings are used in tables, so the width must not exceed ten +#. columns with a fixed-width font. It's OK to omit the dash if +#. you need space for one extra letter, but don't use spaces. +#: src/xz/list.c:72 +msgid "Unknown-2" +msgstr "未知-2" + +#: src/xz/list.c:73 +msgid "Unknown-3" +msgstr "未知-3" + +#: src/xz/list.c:75 +msgid "Unknown-5" +msgstr "未知-5" + +#: src/xz/list.c:76 +msgid "Unknown-6" +msgstr "未知-6" + +#: src/xz/list.c:77 +msgid "Unknown-7" +msgstr "未知-7" + +#: src/xz/list.c:78 +msgid "Unknown-8" +msgstr "未知-8" + +#: src/xz/list.c:79 +msgid "Unknown-9" +msgstr "未知-9" + +#: src/xz/list.c:81 +msgid "Unknown-11" +msgstr "未知-11" + +#: src/xz/list.c:82 +msgid "Unknown-12" +msgstr "未知-12" + +#: src/xz/list.c:83 +msgid "Unknown-13" +msgstr "未知-13" + +#: src/xz/list.c:84 +msgid "Unknown-14" +msgstr "未知-14" + +#: src/xz/list.c:85 +msgid "Unknown-15" +msgstr "未知-15" + +#: src/xz/list.c:153 +#, c-format +msgid "%s: File is empty" +msgstr "%s：檔案是空的" + +#: src/xz/list.c:158 +#, c-format +msgid "%s: Too small to be a valid .xz file" +msgstr "%s：因過小而不認為是個有效 .xz 檔" + +#. TRANSLATORS: These are column headings. From Strms (Streams) +#. to Ratio, the columns are right aligned. Check and Filename +#. are left aligned. If you need longer words, it's OK to +#. use two lines here. Test with "xz -l foo.xz". +#: src/xz/list.c:677 +msgid "Strms Blocks Compressed Uncompressed Ratio Check Filename" +msgstr " 串流 區塊 已壓縮 未壓縮 比例 檢驗碼 檔名" + +#: src/xz/list.c:717 +#, c-format +msgid " Streams: %s\n" +msgstr " 串流： %s\n" + +#: src/xz/list.c:719 +#, c-format +msgid " Blocks: %s\n" +msgstr " 區塊： %s\n" + +#: src/xz/list.c:721 +#, c-format +msgid " Compressed size: %s\n" +msgstr " 壓縮大小： %s\n" + +#: src/xz/list.c:724 +#, c-format +msgid " Uncompressed size: %s\n" +msgstr " 未壓縮大小： %s\n" + +#: src/xz/list.c:727 +#, c-format +msgid " Ratio: %s\n" +msgstr " 壓縮比： %s\n" + +#: src/xz/list.c:729 +#, c-format +msgid " Check: %s\n" +msgstr " 檢驗碼： %s\n" + +#: src/xz/list.c:730 +#, c-format +msgid " Stream padding: %s\n" +msgstr " 串流填充： %s\n" + +# 下方的文字因排版有一些障礙，因此暫時不理他。 +#. TRANSLATORS: The second line is column headings. All except +#. Check are right aligned; Check is left aligned. Test with +#. "xz -lv foo.xz". +#: src/xz/list.c:758 +msgid "" +" Streams:\n" +" Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding" +msgstr "" +" 串流：\n" +" Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding" + +# 下方的文字因排版有一些障礙，因此暫時不理他。 +#. TRANSLATORS: The second line is column headings. All +#. except Check are right aligned; Check is left aligned. +#: src/xz/list.c:813 +#, c-format +msgid "" +" Blocks:\n" +" Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check" +msgstr "" +" 區塊：\n" +" Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check" + +# 下方的文字因排版有一些障礙，因此暫時不理他。 +#. TRANSLATORS: These are additional column headings +#. for the most verbose listing mode. CheckVal +#. (Check value), Flags, and Filters are left aligned. +#. Header (Block Header Size), CompSize, and MemUsage +#. are right aligned. %*s is replaced with 0-120 +#. spaces to make the CheckVal column wide enough. +#. Test with "xz -lvv foo.xz". +#: src/xz/list.c:825 +#, c-format +msgid " CheckVal %*s Header Flags CompSize MemUsage Filters" +msgstr " CheckVal %*s Header Flags CompSize MemUsage Filters" + +#: src/xz/list.c:903 src/xz/list.c:1078 +#, c-format +msgid " Memory needed: %s MiB\n" +msgstr " 所需記憶體量： %s MiB\n" + +#: src/xz/list.c:905 src/xz/list.c:1080 +#, c-format +msgid " Sizes in headers: %s\n" +msgstr " 檔頭中標示大小： %s\n" + +#: src/xz/list.c:906 src/xz/list.c:1081 +msgid "Yes" +msgstr "是" + +#: src/xz/list.c:906 src/xz/list.c:1081 +msgid "No" +msgstr "否" + +#: src/xz/list.c:907 src/xz/list.c:1082 +#, c-format +msgid " Minimum XZ Utils version: %s\n" +msgstr " 最小 XZ 工具程式版本： %s\n" + +#. TRANSLATORS: %s is an integer. Only the plural form of this +#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz". +#: src/xz/list.c:1057 +#, c-format +msgid "%s file\n" +msgid_plural "%s files\n" +msgstr[0] "%s 個檔案\n" + +#: src/xz/list.c:1070 +msgid "Totals:" +msgstr "總計：" + +#: src/xz/list.c:1071 +#, c-format +msgid " Number of files: %s\n" +msgstr " 檔案數： %s\n" + +#: src/xz/list.c:1146 +msgid "--list works only on .xz files (--format=xz or --format=auto)" +msgstr "--list 只能在 .xz 檔使用（--format=xz 或 --format=auto）" + +#: src/xz/list.c:1152 +msgid "--list does not support reading from standard input" +msgstr "--list 不支援從標準輸入讀取" + +#: src/xz/main.c:89 +#, c-format +msgid "%s: Error reading filenames: %s" +msgstr "%s：讀取檔名時發生錯誤：%s" + +#: src/xz/main.c:96 +#, c-format +msgid "%s: Unexpected end of input when reading filenames" +msgstr "%s：讀取檔名時遇到非預期的輸入結尾" + +#: src/xz/main.c:120 +#, c-format +msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?" +msgstr "%s：讀取檔名時發現空字元；或許您想使用「--files0」而非「--files」？" + +#: src/xz/main.c:174 +msgid "Compression and decompression with --robot are not supported yet." +msgstr "尚未支援搭配 --robot 壓縮和解壓縮。" + +#: src/xz/main.c:252 +msgid "Cannot read data from standard input when reading filenames from standard input" +msgstr "從標準輸入讀取檔名時，無法從標準輸入讀取資料" + +#. TRANSLATORS: This is the program name in the beginning +#. of the line in messages. Usually it becomes "xz: ". +#. This is a translatable string because French needs +#. a space before a colon. +#: src/xz/message.c:714 +#, c-format +msgid "%s: " +msgstr "%s：" + +#: src/xz/message.c:777 src/xz/message.c:827 +msgid "Internal error (bug)" +msgstr "內部錯誤（臭蟲）" + +#: src/xz/message.c:784 +msgid "Cannot establish signal handlers" +msgstr "無法確立信號處理器" + +#: src/xz/message.c:793 +msgid "No integrity check; not verifying file integrity" +msgstr "沒有完整性檢查；不驗證檔案完整性" + +#: src/xz/message.c:796 +msgid "Unsupported type of integrity check; not verifying file integrity" +msgstr "未知完整性檢查類型；不驗證檔案完整性" + +#: src/xz/message.c:803 +msgid "Memory usage limit reached" +msgstr "達到記憶體用量上限" + +#: src/xz/message.c:806 +msgid "File format not recognized" +msgstr "無法識別檔案格式" + +#: src/xz/message.c:809 +msgid "Unsupported options" +msgstr "不支援的選項" + +#: src/xz/message.c:812 +msgid "Compressed data is corrupt" +msgstr "壓縮資料是損壞的" + +#: src/xz/message.c:815 +msgid "Unexpected end of input" +msgstr "遇到非預期輸入結尾" + +#: src/xz/message.c:848 +#, c-format +msgid "%s MiB of memory is required. The limiter is disabled." +msgstr "需要 %s MiB 的記憶體。已停用記憶體限制器。" + +#: src/xz/message.c:876 +#, c-format +msgid "%s MiB of memory is required. The limit is %s." +msgstr "需要 %s MiB 的記憶體。記憶體限制為 %s。" + +#: src/xz/message.c:1043 +#, c-format +msgid "%s: Filter chain: %s\n" +msgstr "%s：篩選鏈：%s\n" + +#: src/xz/message.c:1053 +#, c-format +msgid "Try `%s --help' for more information." +msgstr "嘗試「%s --help」取得更多資訊。" + +#: src/xz/message.c:1079 +#, c-format +msgid "" +"Usage: %s [OPTION]... [FILE]...\n" +"Compress or decompress FILEs in the .xz format.\n" +"\n" +msgstr "" +"用法：%s [選項]... [檔案]...\n" +"用 .xz 格式壓縮，或解壓縮 .xz 格式中的 <檔案>。\n" +"\n" + +#: src/xz/message.c:1086 +msgid "Mandatory arguments to long options are mandatory for short options too.\n" +msgstr "長選項的必填參數，對短選項也是必填。\n" + +#: src/xz/message.c:1090 +msgid " Operation mode:\n" +msgstr " 操作模式：\n" + +#: src/xz/message.c:1093 +msgid "" +" -z, --compress force compression\n" +" -d, --decompress force decompression\n" +" -t, --test test compressed file integrity\n" +" -l, --list list information about .xz files" +msgstr "" +" -z, --compress 強制壓縮\n" +" -d, --decompress 強制解壓縮\n" +" -t, --test 測試壓縮檔完整性\n" +" -l, --list 列出 .xz 檔的資訊" + +#: src/xz/message.c:1099 +msgid "" +"\n" +" Operation modifiers:\n" +msgstr "" +"\n" +" 操作修飾詞：\n" + +#: src/xz/message.c:1102 +msgid "" +" -k, --keep keep (don't delete) input files\n" +" -f, --force force overwrite of output file and (de)compress links\n" +" -c, --stdout write to standard output and don't delete input files" +msgstr "" +" -k, --keep 保留（不刪除）輸入檔\n" +" -f, --force 強制覆寫輸出檔並（解）壓縮連結\n" +" -c, --stdout 寫入標準輸出並不刪除輸入檔" + +#: src/xz/message.c:1108 +msgid "" +" --single-stream decompress only the first stream, and silently\n" +" ignore possible remaining input data" +msgstr "" +" --single-stream 僅解壓縮第一個串流，再\n" +" 安靜地忽略可能剩餘的輸入檔" + +#: src/xz/message.c:1111 +msgid "" +" --no-sparse do not create sparse files when decompressing\n" +" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n" +" --files[=FILE] read filenames to process from FILE; if FILE is\n" +" omitted, filenames are read from the standard input;\n" +" filenames must be terminated with the newline character\n" +" --files0[=FILE] like --files but use the null character as terminator" +msgstr "" +" --no-sparse 不在解壓縮時建立疏鬆檔案\n" +" -S, --suffix=.SUF 在壓縮檔加上後綴「.SUF」\n" +" --files[=檔案] 讀取檔案名稱以處理 <檔案>；如省略 <檔案>\n" +" 則從標準輸入讀取檔名；檔名必須以換行字元作為結尾\n" +" --files0[=檔案] 類似 --files 但是以 null 空字元作結尾" + +#: src/xz/message.c:1120 +msgid "" +"\n" +" Basic file format and compression options:\n" +msgstr "" +"\n" +" 基本檔案格式與壓縮選項：\n" + +#: src/xz/message.c:1122 +msgid "" +" -F, --format=FMT file format to encode or decode; possible values are\n" +" `auto' (default), `xz', `lzma', and `raw'\n" +" -C, --check=CHECK integrity check type: `none' (use with caution),\n" +" `crc32', `crc64' (default), or `sha256'" +msgstr "" +" -F, --format=格式 用於編碼或解碼的檔案格式；可用的值有：\n" +" 「auto」（預設）、「xz」、「lzma」及「raw」\n" +" -C, --check=檢查碼 完整性檢查類型：「none」（請小心使用）、「crc32」、\n" +" 「crc64」（預設值）或「sha256」" + +#: src/xz/message.c:1127 +msgid " --ignore-check don't verify the integrity check when decompressing" +msgstr " --ignore-check 不在解壓縮時驗證完整性" + +#: src/xz/message.c:1131 +msgid "" +" -0 ... -9 compression preset; default is 6; take compressor *and*\n" +" decompressor memory usage into account before using 7-9!" +msgstr "" +" -0 ... -9 壓縮設定檔；預設值為 6；使用 7-9 前請考慮\n" +" 壓縮和解壓縮所使用的記憶體！" + +#: src/xz/message.c:1135 +msgid "" +" -e, --extreme try to improve compression ratio by using more CPU time;\n" +" does not affect decompressor memory requirements" +msgstr "" +" -e, --extreme 使用更多 CPU 時間以嘗試改善壓縮比；\n" +" 不影響解壓縮器的記憶體需求" + +#: src/xz/message.c:1139 +msgid "" +" -T, --threads=NUM use at most NUM threads; the default is 1; set to 0\n" +" to use as many threads as there are processor cores" +msgstr "" +" -T, --threads=NUM 使用最多 NUM 個執行緒；預設為 1；設成 0 則使用所有的\n" +" 處理機核心" + +#: src/xz/message.c:1144 +msgid "" +" --block-size=SIZE\n" +" start a new .xz block after every SIZE bytes of input;\n" +" use this to set the block size for threaded compression" +msgstr "" +" --block-size=大小\n" +" 輸入每 <大小> 位元組後，開始一個新 .xz 區塊；\n" +" 使用此功能以設定多執行緒壓縮的區塊大小" + +#: src/xz/message.c:1148 +msgid "" +" --block-list=SIZES\n" +" start a new .xz block after the given comma-separated\n" +" intervals of uncompressed data" +msgstr "" + +#: src/xz/message.c:1152 +msgid "" +" --flush-timeout=TIMEOUT\n" +" when compressing, if more than TIMEOUT milliseconds has\n" +" passed since the previous flush and reading more input\n" +" would block, all pending data is flushed out" +msgstr "" + +#: src/xz/message.c:1158 +#, no-c-format +msgid "" +" --memlimit-compress=LIMIT\n" +" --memlimit-decompress=LIMIT\n" +" -M, --memlimit=LIMIT\n" +" set memory usage limit for compression, decompression,\n" +" or both; LIMIT is in bytes, % of RAM, or 0 for defaults" +msgstr "" +" --memlimit-compress=限制\n" +" --memlimit-decompress=限制\n" +" -M, --memlimit=限制\n" +" 限制壓縮、解壓縮或兩者的記憶體用量上限；\n" +" <限制> 可以是位元組、記憶體百分比 (%)、或 0（預設值）" + +#: src/xz/message.c:1165 +msgid "" +" --no-adjust if compression settings exceed the memory usage limit,\n" +" give an error instead of adjusting the settings downwards" +msgstr "" +" --no-adjust 若壓縮設定超過記憶體用量上限，請給出\n" +" 錯誤而非下調設定" + +#: src/xz/message.c:1171 +msgid "" +"\n" +" Custom filter chain for compression (alternative for using presets):" +msgstr "" +"\n" +" 自訂壓縮篩選鏈（使用設定檔時選用）：" + +#: src/xz/message.c:1180 +msgid "" +"\n" +" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" +" --lzma2[=OPTS] more of the following options (valid values; default):\n" +" preset=PRE reset options to a preset (0-9[e])\n" +" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n" +" lc=NUM number of literal context bits (0-4; 3)\n" +" lp=NUM number of literal position bits (0-4; 0)\n" +" pb=NUM number of position bits (0-4; 2)\n" +" mode=MODE compression mode (fast, normal; normal)\n" +" nice=NUM nice length of a match (2-273; 64)\n" +" mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" +" depth=NUM maximum search depth; 0=automatic (default)" +msgstr "" +"\n" +" --lzma1[=操作] LZMA1 或 LZMA2；<操作> 是以下選項中的 0 個或以上選項\n" +" --lzma2[=操作] （有效值; 預設）：\n" +" preset=PRE 將選項重設至某設定檔的選項 (0-9[e])\n" +" dict=NUM 字典大小 (4KiB - 1536MiB; 8MiB)\n" +" lc=NUM 文字內文位元數 (0-4; 3)\n" +" lp=NUM 文字位置位元數 (0-4; 0)\n" +" pb=NUM 位置位元數 (0-4; 2)\n" +" mode=模式 壓縮模式 (fast, normal; normal)\n" +" nice=NUM 符合項目的 nice 長度 (2-273; 64)\n" +" mf=名稱 尋找符合搜尋器 (hc3, hc4, bt2, bt3, bt4; bt4)\n" +" depth=NUM 最大搜尋深度；0=自動（預設）" + +#: src/xz/message.c:1195 +msgid "" +"\n" +" --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n" +" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n" +" --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n" +" --arm[=OPTS] ARM BCJ filter (little endian only)\n" +" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n" +" --sparc[=OPTS] SPARC BCJ filter\n" +" Valid OPTS for all BCJ filters:\n" +" start=NUM start offset for conversions (default=0)" +msgstr "" +"\n" +" --x86[=OPTS] x86 BCJ 篩選器 (32 位元和 64 位元)\n" +" --powerpc[=OPTS] PowerPC BCJ 篩選器（僅大端序）\n" +" --ia64[=OPTS] IA-64 (Itanium) BCJ 篩選器\n" +" --arm[=OPTS] ARM BCJ 篩選器（僅小端序）\n" +" --armthumb[=OPTS] ARM-Thumb BCJ 篩選器（僅小端序）\n" +" --sparc[=OPTS] SPARC BCJ 篩選器\n" +" 所有 BCJ 篩選器可用的 OPTS：\n" +" start=NUM 轉換起始位移（預設值=0）" + +#: src/xz/message.c:1207 +msgid "" +"\n" +" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n" +" dist=NUM distance between bytes being subtracted\n" +" from each other (1-256; 1)" +msgstr "" + +#: src/xz/message.c:1215 +msgid "" +"\n" +" Other options:\n" +msgstr "" +"\n" +" 其他選項：\n" + +#: src/xz/message.c:1218 +msgid "" +" -q, --quiet suppress warnings; specify twice to suppress errors too\n" +" -v, --verbose be verbose; specify twice for even more verbose" +msgstr "" +" -q, --quiet 隱藏警告訊息；指定兩次也一併隱藏錯誤訊息\n" +" -v, --verbose 輸出較詳細內容；指定兩次更詳細輸出" + +#: src/xz/message.c:1223 +msgid " -Q, --no-warn make warnings not affect the exit status" +msgstr " -Q, --no-warn 即使有警告，退出狀態碼仍不變" + +#: src/xz/message.c:1225 +msgid " --robot use machine-parsable messages (useful for scripts)" +msgstr " --robot 使用機器可解析訊息（適合用於指令稿）" + +#: src/xz/message.c:1228 +msgid "" +" --info-memory display the total amount of RAM and the currently active\n" +" memory usage limits, and exit" +msgstr " --info-memory 顯示記憶體總量和使用中的記憶體用量限制後退出" + +#: src/xz/message.c:1231 +msgid "" +" -h, --help display the short help (lists only the basic options)\n" +" -H, --long-help display this long help and exit" +msgstr "" +" -h, --help 顯示較短說明（僅列出基本選項）\n" +" -H, --long-help 顯示較長說明後退出" + +#: src/xz/message.c:1235 +msgid "" +" -h, --help display this short help and exit\n" +" -H, --long-help display the long help (lists also the advanced options)" +msgstr "" +" -h, --help 顯示較短說明後退出\n" +" -H, --long-help 顯示較長說明（也列出進階選項）" + +#: src/xz/message.c:1240 +msgid " -V, --version display the version number and exit" +msgstr " -V, --version 顯示版本號碼後退出" + +#: src/xz/message.c:1242 +msgid "" +"\n" +"With no FILE, or when FILE is -, read standard input.\n" +msgstr "" +"\n" +"如果未指定 <檔案>，或 <檔案> 是 -，則從標準輸入讀取。\n" + +#. TRANSLATORS: This message indicates the bug reporting address +#. for this package. Please add _another line_ saying +#. "Report translation bugs to <...>\n" with the email or WWW +#. address for translation bugs. Thanks. +#: src/xz/message.c:1248 +#, c-format +msgid "Report bugs to <%s> (in English or Finnish).\n" +msgstr "請回報臭蟲至 <%s>（使用英文或芬蘭語）。\n" + +#: src/xz/message.c:1250 +#, c-format +msgid "%s home page: <%s>\n" +msgstr "%s 首頁：<%s>\n" + +#: src/xz/message.c:1254 +msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE." +msgstr "此為開發版本，不打算在生產環境使用。" + +#: src/xz/options.c:86 +#, c-format +msgid "%s: Options must be `name=value' pairs separated with commas" +msgstr "%s：選項形式必須為以逗號分隔的「name=value」值對" + +#: src/xz/options.c:93 +#, c-format +msgid "%s: Invalid option name" +msgstr "%s：選項名稱無效" + +#: src/xz/options.c:113 +#, c-format +msgid "%s: Invalid option value" +msgstr "%s：選項值無效" + +#: src/xz/options.c:247 +#, c-format +msgid "Unsupported LZMA1/LZMA2 preset: %s" +msgstr "不支援的 LZMA1/LZMA2 設定檔：%s" + +#: src/xz/options.c:355 +msgid "The sum of lc and lp must not exceed 4" +msgstr "lc 和 lp 的總和不能超過 4" + +#: src/xz/options.c:359 +#, c-format +msgid "The selected match finder requires at least nice=%<PRIu32>" +msgstr "選取的符合搜尋工具需要至少 nice=%<PRIu32>" + +#: src/xz/suffix.c:133 src/xz/suffix.c:258 +#, c-format +msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout" +msgstr "%s：搭配 --format=raw 時，除非寫入標準輸出，否則需要 --suffix=.SUF" + +#: src/xz/suffix.c:164 +#, c-format +msgid "%s: Filename has an unknown suffix, skipping" +msgstr "%s：檔名有未知後綴，跳過" + +#: src/xz/suffix.c:185 +#, c-format +msgid "%s: File already has `%s' suffix, skipping" +msgstr "%s：檔案已有「%s」後綴，跳過" + +#: src/xz/suffix.c:393 +#, c-format +msgid "%s: Invalid filename suffix" +msgstr "%s：檔名後綴無效" + +#: src/xz/util.c:71 +#, c-format +msgid "%s: Value is not a non-negative decimal integer" +msgstr "%s：數值不是非負數十進位整數" + +#: src/xz/util.c:113 +#, c-format +msgid "%s: Invalid multiplier suffix" +msgstr "%s：乘數後綴無效" + +#: src/xz/util.c:115 +msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)." +msgstr "有效的後綴有「KiB」(2^10)、「MiB」(2^20) 及「GiB」(2^30)。" + +#: src/xz/util.c:132 +#, c-format +msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]" +msgstr "選項「%s」的數值必須在 [%<PRIu64>, %<PRIu64>] 範圍內" + +#: src/xz/util.c:257 +msgid "Empty filename, skipping" +msgstr "空檔名，跳過" + +#: src/xz/util.c:271 +msgid "Compressed data cannot be read from a terminal" +msgstr "不能從終端機讀入已壓縮資料" + +#: src/xz/util.c:284 +msgid "Compressed data cannot be written to a terminal" +msgstr "不能將已壓縮資料寫入終端機" + +#: src/common/tuklib_exit.c:39 +msgid "Writing to standard output failed" +msgstr "寫入標準輸出失敗" + +#: src/common/tuklib_exit.c:42 +msgid "Unknown error" +msgstr "未知錯誤" |