diff options
Diffstat (limited to '')
| -rw-r--r-- | doxygen/Doxyfile (renamed from Doxyfile.in) | 721 |
1 files changed, 454 insertions, 267 deletions
diff --git a/Doxyfile.in b/doxygen/Doxyfile index a1795d10..f18d18cd 100644 --- a/Doxyfile.in +++ b/doxygen/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.17 +# Doxyfile 1.9.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -12,6 +12,16 @@ # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- # Project related configuration options @@ -32,13 +42,13 @@ DOXYFILE_ENCODING = UTF-8 # title of most generated pages and in a few other places. # The default value is: My Project. -PROJECT_NAME = "@doxygen_project_name@" +PROJECT_NAME = "liblzma (XZ Utils)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version # control system is used. -PROJECT_NUMBER = "@PACKAGE_VERSION@" +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a @@ -58,18 +68,30 @@ PROJECT_LOGO = # entered, it will be relative to the location where doxygen was started. If # left blank the current directory will be used. -OUTPUT_DIRECTORY = doc +OUTPUT_DIRECTORY = ../doc -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes -# performance problems for the file system. +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. # The default value is: NO. CREATE_SUBDIRS = NO +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode @@ -81,26 +103,18 @@ ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English -# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all generated output in the proper direction. -# Possible values are: None, LTR, RTL and Context. -# The default value is: None. - -OUTPUT_TEXT_DIRECTION = None - # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -160,7 +174,7 @@ FULL_PATH_NAMES = YES # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. -STRIP_FROM_PATH = @top_srcdir@/@doxygen_input_path@ +STRIP_FROM_PATH = ../src/liblzma/api # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which @@ -217,6 +231,14 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. @@ -240,25 +262,19 @@ TAB_SIZE = 8 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:\n" +# "sideeffect=@par Side Effects:^^" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines (in the resulting output). You can put ^^ in the value part of an -# alias to insert a newline as if a physical newline was in the original file. -# When you need a literal { or } or , in the value part of an alias you have to -# escape them by means of a backslash (\), this can lead to conflicts with the -# commands \{ and \} for these it is advised to use the version @{ and @} or use -# a double escape (\\{ and \\}) +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) ALIASES = -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For # instance, some of the names that are used will be different. The list of all @@ -267,23 +283,54 @@ TCL_SUBST = OPTIMIZE_OUTPUT_FOR_C = YES +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, JavaScript, -# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, -# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the -# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat -# .inc files as Fortran files (default is PHP), and .f files as C (default is -# Fortran), use: inc=Fortran f=C. +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = @@ -417,6 +464,19 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -435,7 +495,7 @@ EXTRACT_ALL = NO # be included in the documentation. # The default value is: NO. -EXTRACT_PRIVATE = @doxygen_extract_private@ +EXTRACT_PRIVATE = NO # If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual # methods of a class will be included in the documentation. @@ -453,7 +513,7 @@ EXTRACT_PACKAGE = NO # included in the documentation. # The default value is: NO. -EXTRACT_STATIC = @doxygen_extract_private@ +EXTRACT_STATIC = NO # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined # locally in source files will be included in the documentation. If set to NO, @@ -461,7 +521,7 @@ EXTRACT_STATIC = @doxygen_extract_private@ # for Java sources. # The default value is: YES. -EXTRACT_LOCAL_CLASSES = @doxygen_extract_private@ +EXTRACT_LOCAL_CLASSES = NO # This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are @@ -480,6 +540,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -491,7 +558,8 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO @@ -517,12 +585,20 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# (including Cygwin) ands Mac users are advised to set this option to NO. -# The default value is: system dependent. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. CASE_SENSE_NAMES = YES @@ -540,6 +616,12 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -697,7 +779,8 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -743,24 +826,43 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. If -# EXTRACT_ALL is set to YES then this flag will automatically be disabled. +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC # The default value is: NO. WARN_NO_PARAMDOC = NO +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about +# undocumented enumeration values. If set to NO, doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when -# a warning is encountered. +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. # The default value is: NO. WARN_AS_ERROR = NO @@ -771,13 +873,27 @@ WARN_AS_ERROR = NO # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). WARN_LOGFILE = @@ -791,17 +907,28 @@ WARN_LOGFILE = # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = @top_srcdir@/@doxygen_input_path@ +INPUT = ../src/liblzma/api # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: https://www.gnu.org/software/libiconv/) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 +# This tag can be used to specify the character encoding of the source files +# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding +# "INPUT_ENCODING" for further information on supported encodings. + +INPUT_FILE_ENCODING = + # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -810,15 +937,18 @@ INPUT_ENCODING = UTF-8 # need to set EXTENSION_MAPPING for the extension otherwise the files are not # read by doxygen. # +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), -# *.doc (to be provided as doxygen C comment), *.txt (to be provided as doxygen -# C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f, *.for, *.tcl, *.vhd, +# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, +# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C +# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, # *.vhdl, *.ucf, *.qsf and *.ice. -FILE_PATTERNS = *.c *.h +FILE_PATTERNS = *.c \ + *.h # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. @@ -855,7 +985,7 @@ EXCLUDE_PATTERNS = # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test +# ANamespace::AClass, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* @@ -903,6 +1033,11 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # +# Note that doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. @@ -944,6 +1079,15 @@ FILTER_SOURCE_PATTERNS = USE_MDFILE_AS_MAINPAGE = +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1030,35 +1174,6 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -# If clang assisted parsing is enabled you can provide the clang parser with the -# path to the compilation database (see: -# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files -# were built. This is equivalent to specifying the "-p" option to a clang tool, -# such as clang-check. These options will then be passed to the parser. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. - -CLANG_DATABASE_PATH = - #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1070,17 +1185,11 @@ CLANG_DATABASE_PATH = ALPHABETICAL_INDEX = NO -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1100,7 +1209,7 @@ GENERATE_HTML = YES # The default directory is: html. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_OUTPUT = html +HTML_OUTPUT = liblzma # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each # generated HTML page (for example: .htm, .php, .asp). @@ -1159,7 +1268,12 @@ HTML_STYLESHEET = # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = @@ -1174,24 +1288,37 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generate light mode output, DARK always +# generate dark mode output, AUTO_LIGHT automatically set the mode according to +# the user preference, use light mode if no preference is set (the default), +# AUTO_DARK automatically set the mode according to the user preference, use +# dark mode if no preference is set and TOGGLE allow to user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see +# this color. Hue is specified as an angle on a color-wheel, see # https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_HUE = 220 +HTML_COLORSTYLE_HUE = 210 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A +# in the HTML output. For a value of 0 the output will use gray-scales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_SAT = 100 +HTML_COLORSTYLE_SAT = 180 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the # luminance component of the colors in the HTML output. Values below 100 @@ -1202,7 +1329,7 @@ HTML_COLORSTYLE_SAT = 100 # Minimum value: 40, maximum value: 240, default value: 80. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_GAMMA = 80 +HTML_COLORSTYLE_GAMMA = 110 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this @@ -1222,7 +1349,7 @@ HTML_TIMESTAMP = NO # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_DYNAMIC_MENUS = YES +HTML_DYNAMIC_MENUS = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the @@ -1247,10 +1374,11 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: https://developer.apple.com/xcode/), introduced with OSX -# 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy # genXcode/_index.html for more information. @@ -1267,6 +1395,13 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1292,8 +1427,12 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1323,7 +1462,7 @@ CHM_FILE = HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1368,7 +1507,8 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1376,8 +1516,8 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1385,16 +1525,16 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = @@ -1406,9 +1546,9 @@ QHP_CUST_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1451,16 +1591,28 @@ DISABLE_INDEX = NO # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1485,6 +1637,24 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1494,17 +1664,6 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1522,11 +1681,29 @@ FORMULA_MACROFILE = USE_MATHJAX = NO +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1539,22 +1716,29 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. -# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/ # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1601,7 +1785,8 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1614,8 +1799,9 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1710,7 +1896,7 @@ COMPACT_LATEX = NO # The default value is: a4. # This tag requires that the tag GENERATE_LATEX is set to YES. -PAPER_TYPE = a4wide +PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names # that should be included in the LaTeX output. The package can be specified just @@ -1724,29 +1910,31 @@ PAPER_TYPE = a4wide EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that doxygen normally uses. # -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -1779,9 +1967,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1789,8 +1979,7 @@ USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode # command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. +# if errors occur, instead of asking the user for help. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1803,16 +1992,6 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See # https://en.wikipedia.org/wiki/BibTeX and \cite for more info. @@ -1893,16 +2072,6 @@ RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -1999,15 +2168,6 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -2094,7 +2254,8 @@ SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the -# preprocessor. +# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of +# RECURSIVE has no effect here. # This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = @@ -2188,15 +2349,6 @@ EXTERNAL_PAGES = YES # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2215,7 +2367,7 @@ HIDE_UNDOC_RELATIONS = YES # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO -# The default value is: YES. +# The default value is: NO. HAVE_DOT = NO @@ -2229,35 +2381,50 @@ HAVE_DOT = NO DOT_NUM_THREADS = 0 -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node, +# Edge and Graph Attributes specification</a> You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" + +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a +# href=https://graphviz.org/doc/info/arrows.html>Complete documentation about +# arrows shapes.</a> +# The default value is: labelfontname=Helvetica,labelfontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' <a +# href=https://www.graphviz.org/doc/info/shapes.html>Shapes specification</a> +# The default value is: shape=box,height=0.2,width=0.4. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a +# graph for each documented class showing the direct and indirect inheritance +# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, +# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set +# to TEXT the direct and indirect inheritance relations will be shown as texts / +# links. +# Possible values are: NO, YES, TEXT and GRAPH. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES @@ -2271,7 +2438,8 @@ CLASS_GRAPH = YES COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. +# groups, showing the direct groups dependencies. See also the chapter Grouping +# in the manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2294,10 +2462,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2364,6 +2554,13 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: @@ -2371,9 +2568,7 @@ DIRECTORY_GRAPH = YES # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, -# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and # png:gdiplus:gdiplus. # The default value is: png. @@ -2419,10 +2614,10 @@ MSCFILE_DIRS = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. PLANTUML_JAR_PATH = @@ -2460,18 +2655,6 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2484,14 +2667,18 @@ DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc temporary +# files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES |