diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/examples/00_README.txt | 27 | ||||
| -rw-r--r-- | doc/examples/01_compress_easy.c | 297 | ||||
| -rw-r--r-- | doc/examples/02_decompress.c | 287 | ||||
| -rw-r--r-- | doc/examples/03_compress_custom.c | 193 | ||||
| -rw-r--r-- | doc/examples/Makefile | 23 |
5 files changed, 827 insertions, 0 deletions
diff --git a/doc/examples/00_README.txt b/doc/examples/00_README.txt new file mode 100644 index 00000000..a3b9eaa1 --- /dev/null +++ b/doc/examples/00_README.txt @@ -0,0 +1,27 @@ + +liblzma example programs +======================== + +Introduction + + The examples are written so that the same comments aren't + repeated (much) in later files. + + On POSIX systems, the examples should build by just typing "make". + + The examples that use stdin or stdout don't set stdin and stdout + to binary mode. On systems where it matters (e.g. Windows) it is + possible that the examples won't work without modification. + + +List of examples + + 01_compress_easy.c Multi-call compression using + a compression preset + + 02_decompress.c Multi-call decompression + + 03_compress_custom.c Like 01_compress_easy.c but using + a custom filter chain + (x86 BCJ + LZMA2) + diff --git a/doc/examples/01_compress_easy.c b/doc/examples/01_compress_easy.c new file mode 100644 index 00000000..f79cade1 --- /dev/null +++ b/doc/examples/01_compress_easy.c @@ -0,0 +1,297 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file 01_compress_easy.c +/// \brief Compress from stdin to stdout in multi-call mode +/// +/// Usage: ./01_compress_easy PRESET < INFILE > OUTFILE +/// +/// Example: ./01_compress_easy 6 < foo > foo.xz +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include <stdbool.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <lzma.h> + + +static void +show_usage_and_exit(const char *argv0) +{ + fprintf(stderr, "Usage: %s PRESET < INFILE > OUTFILE\n" + "PRESET is a number 0-9 and can optionally be " + "by `e' to indicate extreme preset\n", + argv0); + exit(EXIT_FAILURE); +} + + +static uint32_t +get_preset(int argc, char **argv) +{ + // One argument whose first char must be 0-9. + if (argc != 2 || argv[1][0] < '0' || argv[1][0] > '9') + show_usage_and_exit(argv[0]); + + // Calculate the preste level 0-9. + uint32_t preset = argv[1][0] - '0'; + + // If there is a second char, it must be 'e'. It will set + // the LZMA_PRESET_EXTREME flag. + if (argv[1][1] != '\0') { + if (argv[1][1] != 'e' || argv[1][2] != '\0') + show_usage_and_exit(argv[0]); + + preset |= LZMA_PRESET_EXTREME; + } + + return preset; +} + + +static bool +init_encoder(lzma_stream *strm, uint32_t preset) +{ + // Initialize the encoder using a preset. Set the integrity to check + // to CRC64, which is the default in the xz command line tool. If + // the .xz file needs to be decompressed with XZ Embedded, use + // LZMA_CHECK_CRC32 instead. + lzma_ret ret = lzma_easy_encoder(strm, preset, LZMA_CHECK_CRC64); + + // Return successfully if the initialization went fine. + if (ret == LZMA_OK) + return true; + + // Something went wrong. The possible errors are documented in + // lzma/container.h (src/liblzma/api/lzma/container.h in the source + // package or e.g. /usr/include/lzma/container.h depending on the + // install prefix). + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_OPTIONS_ERROR: + msg = "Specified preset is not supported"; + break; + + case LZMA_UNSUPPORTED_CHECK: + msg = "Specified integrity check is not supported"; + break; + + default: + // This is most likely LZMA_PROG_ERROR indicating a bug in + // this program or in liblzma. It is inconvenient to have a + // separate error message for errors that should be impossible + // to occur, but knowing the error code is important for + // debugging. That's why it is good to print the error code + // at least when there is no good error message to show. + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "Error initializing the encoder: %s (error code %u)\n", + msg, ret); + return false; +} + + +static bool +compress(lzma_stream *strm, FILE *infile, FILE *outfile) +{ + // This will be LZMA_RUN until the end of the input file is reached. + // This tells lzma_code() when there will be no more input. + lzma_action action = LZMA_RUN; + + // Buffers to temporarily hold uncompressed input + // and compressed output. + uint8_t inbuf[BUFSIZ]; + uint8_t outbuf[BUFSIZ]; + + // Initialize the input and output pointers. Initializing next_in + // and avail_in isn't really necessary when we are going to encode + // just one file since LZMA_STREAM_INIT takes care of initializing + // those already. But it doesn't hurt much and it will be needed + // if encoding more than one file like we will in 02_decompress.c. + // + // While we don't care about strm->total_in or strm->total_out in this + // example, it is worth noting that initializing the encoder will + // always reset total_in and total_out to zero. But the encoder + // initialization doesn't touch next_in, avail_in, next_out, or + // avail_out. + strm->next_in = NULL; + strm->avail_in = 0; + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + + // Loop until the file has been successfully compressed or until + // an error occurs. + while (true) { + // Fill the input buffer if it is empty. + if (strm->avail_in == 0 && !feof(infile)) { + strm->next_in = inbuf; + strm->avail_in = fread(inbuf, 1, sizeof(inbuf), + infile); + + if (ferror(infile)) { + fprintf(stderr, "Read error: %s\n", + strerror(errno)); + return false; + } + + // Once the end of the input file has been reached, + // we need to tell lzma_code() that no more input + // will be coming and that it should finish the + // encoding. + if (feof(infile)) + action = LZMA_FINISH; + } + + // Tell liblzma do the actual encoding. + // + // This reads up to strm->avail_in bytes of input starting + // from strm->next_in. avail_in will be decremented and + // next_in incremented by an equal amount to match the + // number of input bytes consumed. + // + // Up to strm->avail_out bytes of compressed output will be + // written starting from strm->next_out. avail_out and next_out + // will be incremented by an equal amount to match the number + // of output bytes written. + // + // The encoder has to do internal buffering, which means that + // it may take quite a bit of input before the same data is + // available in compressed form in the output buffer. + lzma_ret ret = lzma_code(strm, action); + + // If the output buffer is full or if the compression finished + // successfully, write the data from the output bufffer to + // the output file. + if (strm->avail_out == 0 || ret == LZMA_STREAM_END) { + // When lzma_code() has returned LZMA_STREAM_END, + // the output buffer is likely to be only partially + // full. Calculate how much new data there is to + // be written to the output file. + size_t write_size = sizeof(outbuf) - strm->avail_out; + + if (fwrite(outbuf, 1, write_size, outfile) + != write_size) { + fprintf(stderr, "Write error: %s\n", + strerror(errno)); + return false; + } + + // Reset next_out and avail_out. + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + } + + // Normally the return value of lzma_code() will be LZMA_OK + // until everything has been encoded. + if (ret != LZMA_OK) { + // Once everything has been encoded successfully, the + // return value of lzma_code() will be LZMA_STREAM_END. + // + // It is important to check for LZMA_STREAM_END. Do not + // assume that getting ret != LZMA_OK would mean that + // everything has gone well. + if (ret == LZMA_STREAM_END) + return true; + + // It's not LZMA_OK nor LZMA_STREAM_END, + // so it must be an error code. See lzma/base.h + // (src/liblzma/api/lzma/base.h in the source package + // or e.g. /usr/include/lzma/base.h depending on the + // install prefix) for the list and documentation of + // possible values. Most values listen in lzma_ret + // enumeration aren't possible in this example. + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_DATA_ERROR: + // This error is returned if the compressed + // or uncompressed size get near 8 EiB + // (2^63 bytes) because that's where the .xz + // file format size limits currently are. + // That is, the possibility of this error + // is mostly theoretical unless you are doing + // something very unusual. + // + // Note that strm->total_in and strm->total_out + // have nothing to do with this error. Changing + // those variables won't increase or decrease + // the chance of getting this error. + msg = "File size limits exceeded"; + break; + + default: + // This is most likely LZMA_PROG_ERROR, but + // if this program is buggy (or liblzma has + // a bug), it may be e.g. LZMA_BUF_ERROR or + // LZMA_OPTIONS_ERROR too. + // + // It is inconvenient to have a separate + // error message for errors that should be + // impossible to occur, but knowing the error + // code is important for debugging. That's why + // it is good to print the error code at least + // when there is no good error message to show. + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "Encoder error: %s (error code %u)\n", + msg, ret); + return false; + } + } +} + + +extern int +main(int argc, char **argv) +{ + // Get the preset number from the command line. + uint32_t preset = get_preset(argc, argv); + + // Initialize a lzma_stream structure. When it is allocated on stack, + // it is simplest to use LZMA_STREAM_INIT macro like below. When it + // is allocated on heap, using memset(strmptr, 0, sizeof(*strmptr)) + // works (as long as NULL pointers are represented with zero bits + // as they are on practically all computers today). + lzma_stream strm = LZMA_STREAM_INIT; + + // Initialize the encoder. If it succeeds, compress from + // stdin to stdout. + bool success = init_encoder(&strm, preset); + if (success) + success = compress(&strm, stdin, stdout); + + // Free the memory allocated for the encoder. If we were encoding + // multiple files, this would only need to be done after the last + // file. See 02_decompress.c for handling of multiple files. + // + // It is OK to call lzma_end() multiple times or when it hasn't been + // actually used except initialized with LZMA_STREAM_INIT. + lzma_end(&strm); + + // Close stdout to catch possible write errors that can occur + // when pending data is flushed from the stdio buffers. + if (fclose(stdout)) { + fprintf(stderr, "Write error: %s\n", strerror(errno)); + success = false; + } + + return success ? EXIT_SUCCESS : EXIT_FAILURE; +} diff --git a/doc/examples/02_decompress.c b/doc/examples/02_decompress.c new file mode 100644 index 00000000..4c0f37cb --- /dev/null +++ b/doc/examples/02_decompress.c @@ -0,0 +1,287 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file 02_decompress.c +/// \brief Decompress .xz files to stdout +/// +/// Usage: ./02_decompress INPUT_FILES... > OUTFILE +/// +/// Example: ./02_decompress foo.xz bar.xz > foobar +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include <stdbool.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <lzma.h> + + +static bool +init_decoder(lzma_stream *strm) +{ + // Initialize a .xz decoder. The decoder supports a memory usage limit + // and a set of flags. + // + // The memory usage of the decompressor depends on the settings used + // to compress a .xz file. It can vary from less than a megabyte to + // a few gigabytes, but in practice (at least for now) it rarely + // exceeds 65 MiB because that's how much memory is required to + // decompress files created with "xz -9". Settings requiring more + // memory take extra effort to use and don't (at least for now) + // provide significantly better compression in most cases. + // + // Memory usage limit is useful if it is important that the + // decompressor won't consume gigabytes of memory. The need + // for limiting depends on the application. In this example, + // no memory usage limiting is used. This is done by setting + // the limit to UINT64_MAX. + // + // The .xz format allows concatenating compressed files as is: + // + // echo foo | xz > foobar.xz + // echo bar | xz >> foobar.xz + // + // When decompressing normal standalone .xz files, LZMA_CONCATENATED + // should always be used to support decompression of concatenated + // .xz files. If LZMA_CONCATENATED isn't used, the decoder will stop + // after the first .xz stream. This can be useful when .xz data has + // been embedded inside another file format. + // + // Flags other than LZMA_CONCATENATED are supported too, and can + // be combined with bitwise-or. See lzma/container.h + // (src/liblzma/api/lzma/container.h in the source package or e.g. + // /usr/include/lzma/container.h depending on the install prefix) + // for details. + lzma_ret ret = lzma_stream_decoder( + strm, UINT64_MAX, LZMA_CONCATENATED); + + // Return successfully if the initialization went fine. + if (ret == LZMA_OK) + return true; + + // Something went wrong. The possible errors are documented in + // lzma/container.h (src/liblzma/api/lzma/container.h in the source + // package or e.g. /usr/include/lzma/container.h depending on the + // install prefix). + // + // Note that LZMA_MEMLIMIT_ERROR is never possible here. If you + // specify a very tiny limit, the error will be delayed until + // the first headers have been parsed by a call to lzma_code(). + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_OPTIONS_ERROR: + msg = "Unsupported decompressor flags"; + break; + + default: + // This is most likely LZMA_PROG_ERROR indicating a bug in + // this program or in liblzma. It is inconvenient to have a + // separate error message for errors that should be impossible + // to occur, but knowing the error code is important for + // debugging. That's why it is good to print the error code + // at least when there is no good error message to show. + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "Error initializing the decoder: %s (error code %u)\n", + msg, ret); + return false; +} + + +static bool +decompress(lzma_stream *strm, const char *inname, FILE *infile, FILE *outfile) +{ + // When LZMA_CONCATENATED flag was used when initializing the decoder, + // we need to tell lzma_code() when there will be no more input. + // This is done by setting action to LZMA_FINISH instead of LZMA_RUN + // in the same way as it is done when encoding. + // + // When LZMA_CONCATENATED isn't used, there is no need to use + // LZMA_FINISH to tell when all the input has been read, but it + // is still OK to use it if you want. When LZMA_CONCATENATED isn't + // used, the decoder will stop after the first .xz stream. In that + // case some unused data may be left in strm->next_in. + lzma_action action = LZMA_RUN; + + uint8_t inbuf[BUFSIZ]; + uint8_t outbuf[BUFSIZ]; + + strm->next_in = NULL; + strm->avail_in = 0; + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + + while (true) { + if (strm->avail_in == 0 && !feof(infile)) { + strm->next_in = inbuf; + strm->avail_in = fread(inbuf, 1, sizeof(inbuf), + infile); + + if (ferror(infile)) { + fprintf(stderr, "%s: Read error: %s\n", + inname, strerror(errno)); + return false; + } + + // Once the end of the input file has been reached, + // we need to tell lzma_code() that no more input + // will be coming. As said before, this isn't required + // if the LZMA_CONATENATED flag isn't used when + // initializing the decoder. + if (feof(infile)) + action = LZMA_FINISH; + } + + lzma_ret ret = lzma_code(strm, action); + + if (strm->avail_out == 0 || ret == LZMA_STREAM_END) { + size_t write_size = sizeof(outbuf) - strm->avail_out; + + if (fwrite(outbuf, 1, write_size, outfile) + != write_size) { + fprintf(stderr, "Write error: %s\n", + strerror(errno)); + return false; + } + + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + } + + if (ret != LZMA_OK) { + // Once everything has been decoded successfully, the + // return value of lzma_code() will be LZMA_STREAM_END. + // + // It is important to check for LZMA_STREAM_END. Do not + // assume that getting ret != LZMA_OK would mean that + // everything has gone well or that when you aren't + // getting more output it must have successfully + // decoded everything. + if (ret == LZMA_STREAM_END) + return true; + + // It's not LZMA_OK nor LZMA_STREAM_END, + // so it must be an error code. See lzma/base.h + // (src/liblzma/api/lzma/base.h in the source package + // or e.g. /usr/include/lzma/base.h depending on the + // install prefix) for the list and documentation of + // possible values. Many values listen in lzma_ret + // enumeration aren't possible in this example, but + // can be made possible by enabling memory usage limit + // or adding flags to the decoder initialization. + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_FORMAT_ERROR: + // .xz magic bytes weren't found. + msg = "The input is not in the .xz format"; + break; + + case LZMA_OPTIONS_ERROR: + // For example, the headers specify a filter + // that isn't supported by this liblzma + // version (or it hasn't been enabled when + // building liblzma, but no-one sane does + // that unless building liblzma for an + // embedded system). Upgrading to a newer + // liblzma might help. + // + // Note that it is unlikely that the file has + // accidentally became corrupt if you get this + // error. The integrity of the .xz headers is + // always verified with a CRC32, so + // unintentionally corrupt files can be + // distinguished from unsupported files. + msg = "Unsupported compression options"; + break; + + case LZMA_DATA_ERROR: + msg = "Compressed file is corrupt"; + break; + + case LZMA_BUF_ERROR: + // Typically this error means that a valid + // file has got truncated, but it might also + // be a damaged part in the file that makes + // the decoder think the file is truncated. + // If you prefer, you can use the same error + // message for this as for LZMA_DATA_ERROR. + msg = "Compressed file is truncated or " + "otherwise corrupt"; + break; + + default: + // This is most likely LZMA_PROG_ERROR. + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "%s: Decoder error: " + "%s (error code %u)\n", + inname, msg, ret); + return false; + } + } +} + + +extern int +main(int argc, char **argv) +{ + if (argc <= 1) { + fprintf(stderr, "Usage: %s FILES...\n", argv[0]); + return EXIT_FAILURE; + } + + lzma_stream strm = LZMA_STREAM_INIT; + + bool success = true; + + // Try to decompress all files. + for (int i = 1; i < argc; ++i) { + if (!init_decoder(&strm)) { + // Decoder initialization failed. There's no point + // to retry it so we need to exit. + success = false; + break; + } + + FILE *infile = fopen(argv[i], "rb"); + + if (infile == NULL) { + fprintf(stderr, "%s: Error opening the " + "input file: %s\n", + argv[i], strerror(errno)); + success = false; + } else { + success &= decompress(&strm, argv[i], infile, stdout); + fclose(infile); + } + } + + // Free the memory allocated for the decoder. This only needs to be + // done after the last file. + lzma_end(&strm); + + if (fclose(stdout)) { + fprintf(stderr, "Write error: %s\n", strerror(errno)); + success = false; + } + + return success ? EXIT_SUCCESS : EXIT_FAILURE; +} diff --git a/doc/examples/03_compress_custom.c b/doc/examples/03_compress_custom.c new file mode 100644 index 00000000..51abbb17 --- /dev/null +++ b/doc/examples/03_compress_custom.c @@ -0,0 +1,193 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file 03_compress_custom.c +/// \brief Compress in multi-call mode using x86 BCJ and LZMA2 +/// +/// Usage: ./03_compress_custom < INFILE > OUTFILE +/// +/// Example: ./03_compress_custom < foo > foo.xz +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include <stdbool.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <lzma.h> + + +static bool +init_encoder(lzma_stream *strm) +{ + // Use the default preset (6) for LZMA2. + // + // The lzma_options_lzma structure and the lzma_lzma_preset() function + // are declared in lzma/lzma.h (src/liblzma/api/lzma/lzma.h in the + // source package or e.g. /usr/include/lzma/lzma.h depending on + // the install prefix). + lzma_options_lzma opt_lzma2; + if (lzma_lzma_preset(&opt_lzma2, LZMA_PRESET_DEFAULT)) { + // It should never fail because the default preset + // (and presets 0-9 optionally with LZMA_PRESET_EXTREME) + // are supported by all stable liblzma versions. + // + // (The encoder initialization later in this function may + // still fail due to unsupported preset *if* the features + // required by the preset have been disabled at build time, + // but no-one does such things except on embedded systems.) + fprintf(stderr, "Unsupported preset, possibly a bug\n"); + return false; + } + + // Now we could customize the LZMA2 options if we wanted. For example, + // we could set the the dictionary size (opt_lzma2.dict_size) to + // something else than the default (8 MiB) of the default preset. + // See lzma/lzma.h for details of all LZMA2 options. + // + // The x86 BCJ filter will try to modify the x86 instruction stream so + // that LZMA2 can compress it better. The x86 BCJ filter doesn't need + // any options so it will be set to NULL below. + // + // Construct the filter chain. The uncompressed data goes first to + // the first filter in the array, in this case the x86 BCJ filter. + // The array is always terminated by setting .id = LZMA_VLI_UNKNOWN. + // + // See lzma/filter.h for more information about the lzma_filter + // structure. + lzma_filter filters[] = { + { .id = LZMA_FILTER_X86, .options = NULL }, + { .id = LZMA_FILTER_LZMA2, .options = &opt_lzma2 }, + { .id = LZMA_VLI_UNKNOWN, .options = NULL }, + }; + + // Initialize the encoder using the custom filter chain. + lzma_ret ret = lzma_stream_encoder(strm, filters, LZMA_CHECK_CRC64); + + if (ret == LZMA_OK) + return true; + + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_OPTIONS_ERROR: + // We are no longer using a plain preset so this error + // message has been edited accordingly compared to + // 01_compress_easy.c. + msg = "Specified filter chain is not supported"; + break; + + case LZMA_UNSUPPORTED_CHECK: + msg = "Specified integrity check is not supported"; + break; + + default: + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "Error initializing the encoder: %s (error code %u)\n", + msg, ret); + return false; +} + + +// This function is identical to the one in 01_compress_easy.c. +static bool +compress(lzma_stream *strm, FILE *infile, FILE *outfile) +{ + lzma_action action = LZMA_RUN; + + uint8_t inbuf[BUFSIZ]; + uint8_t outbuf[BUFSIZ]; + + strm->next_in = NULL; + strm->avail_in = 0; + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + + while (true) { + if (strm->avail_in == 0 && !feof(infile)) { + strm->next_in = inbuf; + strm->avail_in = fread(inbuf, 1, sizeof(inbuf), + infile); + + if (ferror(infile)) { + fprintf(stderr, "Read error: %s\n", + strerror(errno)); + return false; + } + + if (feof(infile)) + action = LZMA_FINISH; + } + + lzma_ret ret = lzma_code(strm, action); + + if (strm->avail_out == 0 || ret == LZMA_STREAM_END) { + size_t write_size = sizeof(outbuf) - strm->avail_out; + + if (fwrite(outbuf, 1, write_size, outfile) + != write_size) { + fprintf(stderr, "Write error: %s\n", + strerror(errno)); + return false; + } + + strm->next_out = outbuf; + strm->avail_out = sizeof(outbuf); + } + + if (ret != LZMA_OK) { + if (ret == LZMA_STREAM_END) + return true; + + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = "Memory allocation failed"; + break; + + case LZMA_DATA_ERROR: + msg = "File size limits exceeded"; + break; + + default: + msg = "Unknown error, possibly a bug"; + break; + } + + fprintf(stderr, "Encoder error: %s (error code %u)\n", + msg, ret); + return false; + } + } +} + + +extern int +main(void) +{ + lzma_stream strm = LZMA_STREAM_INIT; + + bool success = init_encoder(&strm); + if (success) + success = compress(&strm, stdin, stdout); + + lzma_end(&strm); + + if (fclose(stdout)) { + fprintf(stderr, "Write error: %s\n", strerror(errno)); + success = false; + } + + return success ? EXIT_SUCCESS : EXIT_FAILURE; +} diff --git a/doc/examples/Makefile b/doc/examples/Makefile new file mode 100644 index 00000000..644dc32e --- /dev/null +++ b/doc/examples/Makefile @@ -0,0 +1,23 @@ +# +# Author: Lasse Collin +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# + +CC = c99 +CFLAGS = -g +LDFLAGS = -llzma + +PROGS = \ + 01_compress_easy \ + 02_decompress \ + 03_compress_custom + +all: $(PROGS) + +.c: + $(CC) $(CFLAGS) -o $@ $< $(LDFLAGS) + +clean: + -rm -f $(PROGS) |