diff options
41 files changed, 482 insertions, 398 deletions
diff --git a/configure.ac b/configure.ac index 88aca89a..fbe023a3 100644 --- a/configure.ac +++ b/configure.ac @@ -102,9 +102,9 @@ AM_CONDITIONAL(COND_MAIN_DECODER, test "x$enable_decoder" = xyes) # Filters # ########### -m4_define([SUPPORTED_FILTERS], [lzma,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc])dnl +m4_define([SUPPORTED_FILTERS], [lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc])dnl m4_define([SIMPLE_FILTERS], [x86,powerpc,ia64,arm,armthumb,sparc]) -m4_define([LZ_FILTERS], [lzma,lzma2]) +m4_define([LZ_FILTERS], [lzma1,lzma2]) m4_foreach([NAME], [SUPPORTED_FILTERS], [enable_filter_[]NAME=no @@ -165,16 +165,16 @@ else esac done - # LZMA2 requires that LZMA is enabled. - test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma=yes - test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma=yes + # LZMA2 requires that LZMA1 is enabled. + test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma1=yes + test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma1=yes AC_MSG_RESULT([$enable_decoders]) fi -if test "x$enable_encoder_lzma2$enable_encoder_lzma" = xyesno \ - || test "x$enable_decoder_lzma2$enable_decoder_lzma" = xyesno; then - AC_MSG_ERROR([LZMA2 requires that LZMA is also enabled.]) +if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \ + || test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then + AC_MSG_ERROR([LZMA2 requires that LZMA1 is also enabled.]) fi m4_foreach([NAME], [SUPPORTED_FILTERS], @@ -224,7 +224,7 @@ AC_MSG_CHECKING([which match finders to build]) AC_ARG_ENABLE(match-finders, AC_HELP_STRING([--enable-match-finders=LIST], [Comma-separated list of match finders to build. Default=all. At least one match finder is required for encoding with - the LZMA filter. Available match finders:] + the LZMA1 and LZMA2 filters. Available match finders:] m4_translit(m4_defn([SUPPORTED_MATCH_FINDERS]), [,], [ ])), [], [enable_match_finders=SUPPORTED_MATCH_FINDERS]) enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'` diff --git a/debug/full_flush.c b/debug/full_flush.c index 50725360..3c914549 100644 --- a/debug/full_flush.c +++ b/debug/full_flush.c @@ -74,9 +74,14 @@ main(int argc, char **argv) // Config + lzma_options_lzma opt_lzma; + if (lzma_lzma_preset(&opt_lzma, 0)) { + fprintf(stderr, "preset failed\n"); + exit(1); + } lzma_filter filters[LZMA_BLOCK_FILTERS_MAX + 1]; filters[0].id = LZMA_FILTER_LZMA2; - filters[0].options = (void *)&lzma_preset_lzma[0]; + filters[0].options = &opt_lzma; filters[1].id = LZMA_VLI_UNKNOWN; // Init diff --git a/debug/known_sizes.c b/debug/known_sizes.c index beb05fde..ef7472de 100644 --- a/debug/known_sizes.c +++ b/debug/known_sizes.c @@ -47,10 +47,14 @@ main(void) const size_t in_size = fread(in, 1, BUFFER_SIZE, stdin); // Filter setup + lzma_options_lzma opt_lzma; + if (lzma_lzma_preset(&opt_lzma, 0)) + return 1; + lzma_filter filters[] = { { .id = LZMA_FILTER_LZMA2, - .options = (void *)(&lzma_preset_lzma[0]) + .options = &opt_lzma }, { .id = LZMA_VLI_UNKNOWN diff --git a/debug/memusage.c b/debug/memusage.c index eaf81f95..2dbb39e0 100644 --- a/debug/memusage.c +++ b/debug/memusage.c @@ -26,27 +26,27 @@ main(void) lzma_init(); lzma_options_lzma lzma = { - .dictionary_size = (1 << 27) + (1 << 26), - .literal_context_bits = 3, - .literal_pos_bits = 0, - .pos_bits = 2, - .preset_dictionary = NULL, - .preset_dictionary_size = 0, + .dict_size = (1U << 27) + (1U << 26), + .lc = 3, + .lp = 0, + .pb = 2, + .preset_dict = NULL, + .preset_dict_size = 0, .mode = LZMA_MODE_NORMAL, - .fast_bytes = 48, - .match_finder = LZMA_MF_BT4, - .match_finder_cycles = 0, + .nice_len = 48, + .mf = LZMA_MF_BT4, + .depth = 0, }; /* lzma_options_filter filters[] = { - { LZMA_FILTER_LZMA, + { LZMA_FILTER_LZMA1, (lzma_options_lzma *)&lzma_preset_lzma[6 - 1] }, { UINT64_MAX, NULL } }; */ lzma_filter filters[] = { - { LZMA_FILTER_LZMA, &lzma }, + { LZMA_FILTER_LZMA1, &lzma }, { UINT64_MAX, NULL } }; diff --git a/debug/sync_flush.c b/debug/sync_flush.c index 9e140fb6..a161ca31 100644 --- a/debug/sync_flush.c +++ b/debug/sync_flush.c @@ -74,16 +74,16 @@ main(int argc, char **argv) // Config lzma_options_lzma opt_lzma = { - .dictionary_size = 1 << 16, - .literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT, - .literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT, - .pos_bits = LZMA_POS_BITS_DEFAULT, - .preset_dictionary = NULL, + .dict_size = 1U << 16, + .lc = LZMA_LC_DEFAULT, + .lp = LZMA_LP_DEFAULT, + .pb = LZMA_PB_DEFAULT, + .preset_dict = NULL, .persistent = true, .mode = LZMA_MODE_NORMAL, - .fast_bytes = 32, - .match_finder = LZMA_MF_HC3, - .match_finder_cycles = 0, + .nice_len = 32, + .mf = LZMA_MF_HC3, + .depth = 0, }; lzma_options_delta opt_delta = { @@ -97,7 +97,7 @@ main(int argc, char **argv) .rle = 1, // LZMA_SUBBLOCK_RLE_OFF, .subfilter_mode = LZMA_SUBFILTER_SET, }; - opt_subblock.subfilter_options.id = LZMA_FILTER_LZMA; + opt_subblock.subfilter_options.id = LZMA_FILTER_LZMA1; opt_subblock.subfilter_options.options = &opt_lzma; opt_subblock.subfilter_options.id = LZMA_FILTER_DELTA; opt_subblock.subfilter_options.options = &opt_delta; diff --git a/src/liblzma/Makefile.am b/src/liblzma/Makefile.am index a234bfd5..46a80835 100644 --- a/src/liblzma/Makefile.am +++ b/src/liblzma/Makefile.am @@ -27,7 +27,7 @@ SUBDIRS += lz liblzma_la_LIBADD += lz/liblz.la endif -if COND_FILTER_LZMA +if COND_FILTER_LZMA1 SUBDIRS += lzma rangecoder liblzma_la_LIBADD += \ lzma/liblzma2.la \ diff --git a/src/liblzma/api/lzma/delta.h b/src/liblzma/api/lzma/delta.h index 740de97c..bdb5b926 100644 --- a/src/liblzma/api/lzma/delta.h +++ b/src/liblzma/api/lzma/delta.h @@ -60,9 +60,9 @@ typedef struct { * - 16-bit stereo audio: distance = 4 bytes * - 24-bit RGB image data: distance = 3 bytes */ - uint32_t distance; -# define LZMA_DELTA_DISTANCE_MIN 1 -# define LZMA_DELTA_DISTANCE_MAX 256 + uint32_t dist; +# define LZMA_DELTA_DIST_MIN 1 +# define LZMA_DELTA_DIST_MAX 256 /** * \brief Reserved space for possible future extensions @@ -73,6 +73,8 @@ typedef struct { */ uint32_t reserved_int1; uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; void *reserved_ptr1; void *reserved_ptr2; diff --git a/src/liblzma/api/lzma/lzma.h b/src/liblzma/api/lzma/lzma.h index c4d5dbfa..094667eb 100644 --- a/src/liblzma/api/lzma/lzma.h +++ b/src/liblzma/api/lzma/lzma.h @@ -1,6 +1,6 @@ /** * \file lzma/lzma.h - * \brief LZMA filter + * \brief LZMA1 and LZMA2 filters * * \author Copyright (C) 1999-2006 Igor Pavlov * \author Copyright (C) 2007 Lasse Collin @@ -22,12 +22,22 @@ /** - * \brief Filter ID + * \brief LZMA1 Filter ID * - * Filter ID of the LZMA filter. This is used as lzma_filter.id. + * LZMA1 is the very same thing as what was called just LZMA in earlier + * LZMA Utils, 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent + * developers from accidentally using LZMA when they actually want LZMA2. */ -#define LZMA_FILTER_LZMA LZMA_VLI_C(0x20) +#define LZMA_FILTER_LZMA1 LZMA_VLI_C(0x4000000000000001) +/** + * \brief LZMA2 Filter ID + * + * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds + * support for LZMA_SYNC_FLUSH, uncompressed chunks (expands uncompressible + * data less), possibility to change lc/lp/pb in the middle of encoding, and + * some other internal improvements. + */ #define LZMA_FILTER_LZMA2 LZMA_VLI_C(0x21) @@ -36,55 +46,60 @@ * * Match finder has major effect on both speed and compression ratio. * Usually hash chains are faster than binary trees. + * + * The memory usage formulas are only rough estimates, which are closest to + * reality when dict_size is a power of two. The formulas are more complex + * in reality, and can also change a little between liblzma versions. Use + * lzma_memusage_encoder() to get more accurate estimate of memory usage. */ typedef enum { LZMA_MF_HC3 = 0x03, /**< - * \brief Hash Chain with 3 bytes hashing + * \brief Hash Chain with 2- and 3-byte hashing * - * \todo Memory requirements + * Minimum nice_len: 3 * - * \note It's possible that this match finder gets - * removed in future. The definition will stay - * in this header, but liblzma may return - * LZMA_OPTIONS_ERROR if it is specified (just - * like it would if the match finder had been - * disabled at compile time). + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 7.5 + * - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB */ LZMA_MF_HC4 = 0x04, /**< - * \brief Hash Chain with 4 bytes hashing + * \brief Hash Chain with 2-, 3-, and 4-byte hashing * - * Memory requirements: 7.5 * dictionary_size + 4 MiB + * Minimum nice_len: 4 * - * \note It's possible that this match finder gets - * removed in future. The definition will stay - * in this header, but liblzma may return - * LZMA_OPTIONS_ERROR if it is specified (just - * like it would if the match finder had been - * disabled at compile time). + * Memory usage: dict_size * 7.5 */ LZMA_MF_BT2 = 0x12, /**< - * \brief Binary Tree with 2 bytes hashing + * \brief Binary Tree with 2-byte hashing + * + * Minimum nice_len: 2 * - * Memory requirements: 9.5 * dictionary_size + 4 MiB + * Memory usage: dict_size * 9.5 */ LZMA_MF_BT3 = 0x13, /**< - * \brief Binary Tree with 3 bytes hashing + * \brief Binary Tree with 2- and 3-byte hashing + * + * Minimum nice_len: 3 * - * Memory requirements: 11.5 * dictionary_size + 4 MiB + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 11.5 + * - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB */ LZMA_MF_BT4 = 0x14 /**< - * \brief Binary Tree with 4 bytes hashing + * \brief Binary Tree with 2-, 3-, and 4-byte hashing * - * Memory requirements: 11.5 * dictionary_size + 4 MiB + * Minimum nice_len: 4 + * + * Memory usage: dict_size * 11.5 */ } lzma_match_finder; @@ -114,7 +129,7 @@ extern lzma_bool lzma_mf_is_supported(lzma_match_finder match_finder) * finder. */ typedef enum { - LZMA_MODE_FAST = 0, + LZMA_MODE_FAST = 1, /**< * \brief Fast compression * @@ -122,7 +137,7 @@ typedef enum { * a hash chain match finder. */ - LZMA_MODE_NORMAL = 1 + LZMA_MODE_NORMAL = 2 /**< * \brief Normal compression * @@ -149,7 +164,7 @@ extern lzma_bool lzma_mode_is_available(lzma_mode mode) lzma_attr_const; /** - * \brief Options specific to the LZMA method handler + * \brief Options specific to the LZMA1 and LZMA2 filters */ typedef struct { /********************************** @@ -167,14 +182,30 @@ typedef struct { * indicate what data to repeat from the dictionary buffer. Thus, * the bigger the dictionary, the better compression ratio usually is. * - * Raw decoding: Too big dictionary does no other harm than - * wasting memory. This value is ignored by lzma_raw_decode_buffer(), - * because it uses the target buffer as the dictionary. + * Maximum size of the dictionary depends on multiple things: + * - Memory usage limit + * - Available address space (not a problem on 64-bit systems) + * - Selected match finder (encoder only) + * + * Currently the maximum dictionary size for encoding is 1.5 GiB + * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit + * systems for certain match finder implementation reasons. In future, + * there may be match finders that support bigger dictionaries (3 GiB + * will probably be the maximum). + * + * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e. + * UINT32_MAX), so increasing the maximum dictionary size of the + * encoder won't cause problems for old decoders. + * + * Because extremely small dictionaries sizes would have unneeded + * overhead in the decoder, the minimum dictionary size is 4096 bytes. + * + * \note When decoding, too big dictionary does no other harm + * than wasting memory. */ - uint32_t dictionary_size; -# define LZMA_DICTIONARY_SIZE_MIN (UINT32_C(1) << 12) -# define LZMA_DICTIONARY_SIZE_MAX (UINT32_C(1) << 30) -# define LZMA_DICTIONARY_SIZE_DEFAULT (UINT32_C(1) << 23) + uint32_t dict_size; +# define LZMA_DICT_SIZE_MIN UINT32_C(4096) +# define LZMA_DICT_SIZE_DEFAULT (UINT32_C(1) << 23) /** * \brief Pointer to an initial dictionary @@ -201,18 +232,17 @@ typedef struct { * * \todo This feature is not implemented yet. */ - const uint8_t *preset_dictionary; + const uint8_t *preset_dict; /** * \brief Size of the preset dictionary * * Specifies the size of the preset dictionary. If the size is - * bigger than dictionary_size, only the last dictionary_size - * bytes are processed. + * bigger than dict_size, only the last dict_size bytes are processed. * - * This variable is read only when preset_dictionary is not NULL. + * This variable is read only when preset_dict is not NULL. */ - uint32_t preset_dictionary_size; + uint32_t preset_dict_size; /** * \brief Number of literal context bits @@ -222,11 +252,21 @@ typedef struct { * account when predicting the bits of the next literal. * * \todo Example + * + * There is a limit that applies to literal context bits and literal + * position bits together: lc + lp <= 4. Without this limit the + * decoding could become very slow, which could have security related + * results in some cases like email servers doing virus scanning. + * This limit also simplifies the internal implementation in liblzma. + * + * There may be LZMA streams that have lc + lp > 4 (maximum lc + * possible would be 8). It is not possible to decode such streams + * with liblzma. */ - uint32_t literal_context_bits; -# define LZMA_LITERAL_CONTEXT_BITS_MIN 0 -# define LZMA_LITERAL_CONTEXT_BITS_MAX 4 -# define LZMA_LITERAL_CONTEXT_BITS_DEFAULT 3 + uint32_t lc; +# define LZMA_LCLP_MIN 0 +# define LZMA_LCLP_MAX 4 +# define LZMA_LC_DEFAULT 3 /** * \brief Number of literal position bits @@ -238,10 +278,8 @@ typedef struct { * * \todo Example */ - uint32_t literal_pos_bits; -# define LZMA_LITERAL_POS_BITS_MIN 0 -# define LZMA_LITERAL_POS_BITS_MAX 4 -# define LZMA_LITERAL_POS_BITS_DEFAULT 0 + uint32_t lp; +# define LZMA_LP_DEFAULT 0 /** * \brief Number of position bits @@ -252,14 +290,13 @@ typedef struct { * which a matching sequence is found from the dictionary and * thus can be stored as distance-length pair. * - * Example: If most of the matches occur at byte positions - * of 8 * n + 3, that is, 3, 11, 19, ... set pos_bits to 3, - * because 2**3 == 8. + * Example: If most of the matches occur at byte positions of + * 8 * n + 3, that is, 3, 11, 19, ... set pb to 3, because 2**3 == 8. */ - uint32_t pos_bits; -# define LZMA_POS_BITS_MIN 0 -# define LZMA_POS_BITS_MAX 4 -# define LZMA_POS_BITS_DEFAULT 2 + uint32_t pb; +# define LZMA_PB_MIN 0 +# define LZMA_PB_MAX 4 +# define LZMA_PB_DEFAULT 2 /****************************************** * LZMA options needed only when encoding * @@ -274,7 +311,7 @@ typedef struct { * in the middle of the encoding process without resetting the encoder. * * This option is used only by LZMA2. LZMA1 ignores this and it is - * safeto not initialize this when encoding with LZMA1. + * safe to not initialize this when encoding with LZMA1. */ lzma_bool persistent; @@ -282,31 +319,56 @@ typedef struct { lzma_mode mode; /** - * \brief Number of fast bytes + * \brief Nice length of a match + * + * This determines how many bytes the encoder compares from the match + * candidates when looking for the best match. Once a match of at + * least nice_len bytes long is found, the encoder stops looking for + * better condidates and encodes the match. (Naturally, if the found + * match is actually longer than nice_len, the actual length is + * encoded; it's not truncated to nice_len.) * - * Number of fast bytes determines how many bytes the encoder - * compares from the match candidates when looking for the best - * match. Bigger fast bytes value usually increase both compression - * ratio and time. + * Bigger values usually increase the compression ratio and + * compression time. For most files, 30 to 100 is a good value, + * which gives very good compression ratio at good speed. + * + * The exact minimum value depends on the match finder. The maximum is + * 273, which is the maximum length of a match that LZMA can encode. */ - uint32_t fast_bytes; -# define LZMA_FAST_BYTES_MIN 5 -# define LZMA_FAST_BYTES_MAX 273 -# define LZMA_FAST_BYTES_DEFAULT 128 + uint32_t nice_len; /** Match finder ID */ - lzma_match_finder match_finder; + lzma_match_finder mf; /** - * \brief Match finder cycles + * \brief Maximum search depth in the match finder + * + * For every input byte, match finder searches through the hash chain + * or binary tree in a loop, each iteration going one step deeper in + * the chain or tree. The searching stops if + * - a match of at least nice_len bytes long is found; + * - all match candidates from the hash chain or binary tree have + * been checked; or + * - maximum search depth is reached. + * + * Maximum search depth is needed to prevent the match finder from + * wasting too much time in case there are lots of short match + * candidates. On the other hand, stopping the search before all + * candidates have been checked can reduce compression ratio. * - * Higher values give slightly better compression ratio but - * decrease speed. Use special value 0 to let liblzma use - * match-finder-dependent default value. + * Setting depth to zero tells liblzma to use an automatic default + * value, that depends on the selected match finder and nice_len. + * The default is in the range [10, 200] or so (it may vary between + * liblzma versions). * - * \todo Write much better description. + * Using a bigger depth value than the default can increase + * compression ratio in some cases. There is no strict maximum value, + * but high values (thousands or millions) should be used with care: + * the encoder could remain fast enough with typical input, but + * malicious input could cause the match finder to slow down + * dramatically, possibly creating a denial of service attack. */ - uint32_t match_finder_cycles; + uint32_t depth; /** * \brief Reserved space for possible future extensions @@ -319,6 +381,10 @@ typedef struct { uint32_t reserved_int2; uint32_t reserved_int3; uint32_t reserved_int4; + uint32_t reserved_int5; + uint32_t reserved_int6; + uint32_t reserved_int7; + uint32_t reserved_int8; void *reserved_ptr1; void *reserved_ptr2; @@ -326,21 +392,13 @@ typedef struct { /** - * \brief Maximum sum of literal_context_bits and literal_pos_bits - * - * literal_context_bits + literal_pos_bits <= LZMA_LITERAL_BITS_MAX - */ -#define LZMA_LITERAL_BITS_MAX 4 - - -/** - * \brief Table of presets for the LZMA filter + * \brief Set a compression level preset to lzma_options_lzma structure * - * lzma_preset_lzma[0] is the fastest and lzma_preset_lzma[8] is the slowest. - * These presets match the switches -1 .. -9 of the lzma command line tool + * level = 0 is the fastest and level = 8 is the slowest. These presets match + * the switches -1 .. -9 of the command line tool. * * The preset values are subject to changes between liblzma versions. * - * This variable is available only if LZMA encoder has been enabled. + * This function is available only if LZMA encoder has been enabled. */ -extern const lzma_options_lzma lzma_preset_lzma[9]; +extern lzma_bool lzma_lzma_preset(lzma_options_lzma *options, uint32_t level); diff --git a/src/liblzma/common/alignment.c b/src/liblzma/common/alignment.c index cfd515e6..ff38062e 100644 --- a/src/liblzma/common/alignment.c +++ b/src/liblzma/common/alignment.c @@ -50,10 +50,9 @@ lzma_alignment_input(const lzma_filter *filters, uint32_t guess) case LZMA_FILTER_IA64: return 16; - case LZMA_FILTER_LZMA: { + case LZMA_FILTER_LZMA1: { const lzma_options_lzma *lzma = filters[i].options; - return 1 << MAX(lzma->pos_bits, - lzma->literal_pos_bits); + return 1 << MAX(lzma->pb, lzma->lp); } default: @@ -91,7 +90,7 @@ lzma_alignment_output(const lzma_filter *filters, uint32_t guess) filters[i].options))->alignment; case LZMA_FILTER_X86: - case LZMA_FILTER_LZMA: + case LZMA_FILTER_LZMA1: return 1; case LZMA_FILTER_ARMTHUMB: diff --git a/src/liblzma/common/alone_decoder.c b/src/liblzma/common/alone_decoder.c index 45cb54e5..7ff29289 100644 --- a/src/liblzma/common/alone_decoder.c +++ b/src/liblzma/common/alone_decoder.c @@ -68,12 +68,11 @@ alone_decode(lzma_coder *coder, break; case SEQ_DICTIONARY_SIZE: - coder->options.dictionary_size + coder->options.dict_size |= (size_t)(in[*in_pos]) << (coder->pos * 8); if (++coder->pos == 4) { - if (coder->options.dictionary_size - > LZMA_DICTIONARY_SIZE_MAX) + if (coder->options.dict_size > (UINT32_C(1) << 30)) return LZMA_FORMAT_ERROR; // A hack to ditch tons of false positives: We allow @@ -81,7 +80,7 @@ alone_decode(lzma_coder *coder, // LZMA_Alone created only files with 2^n, but accepts // any dictionary size. If someone complains, this // will be reconsidered. - uint32_t d = coder->options.dictionary_size - 1; + uint32_t d = coder->options.dict_size - 1; d |= d >> 2; d |= d >> 3; d |= d >> 4; @@ -89,7 +88,7 @@ alone_decode(lzma_coder *coder, d |= d >> 16; ++d; - if (d != coder->options.dictionary_size) + if (d != coder->options.dict_size) return LZMA_FORMAT_ERROR; coder->pos = 0; @@ -199,7 +198,7 @@ lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator, next->coder->sequence = SEQ_PROPERTIES; next->coder->pos = 0; - next->coder->options.dictionary_size = 0; + next->coder->options.dict_size = 0; next->coder->uncompressed_size = 0; next->coder->memlimit = memlimit; diff --git a/src/liblzma/common/alone_encoder.c b/src/liblzma/common/alone_encoder.c index 7fb11570..41fb6162 100644 --- a/src/liblzma/common/alone_encoder.c +++ b/src/liblzma/common/alone_encoder.c @@ -106,9 +106,10 @@ alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator, if (lzma_lzma_lclppb_encode(options, next->coder->header)) return LZMA_PROG_ERROR; - // - Dictionary size (4 bytes) - if (options->dictionary_size < LZMA_DICTIONARY_SIZE_MIN - || options->dictionary_size > LZMA_DICTIONARY_SIZE_MAX) + // - Dictionary size (4 bytes); limit to 1 GiB since that's what + // LZMA SDK currently does for encoding. + if (options->dict_size < LZMA_DICT_SIZE_MIN + || options->dict_size > (UINT32_C(1) << 30)) return LZMA_PROG_ERROR; // Round up to to the next 2^n or 2^n + 2^(n - 1) depending on which @@ -118,7 +119,7 @@ alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator, // // FIXME Maybe LZMA_Alone needs some lower limit for maximum // dictionary size? Must check decoders from old LZMA SDK version. - uint32_t d = options->dictionary_size - 1; + uint32_t d = options->dict_size - 1; d |= d >> 2; d |= d >> 3; d |= d >> 4; diff --git a/src/liblzma/common/chunk_size.c b/src/liblzma/common/chunk_size.c index 74d4a6f4..33276b28 100644 --- a/src/liblzma/common/chunk_size.c +++ b/src/liblzma/common/chunk_size.c @@ -55,7 +55,7 @@ lzma_chunk_size(const lzma_options_filter *filters) // splitting the data in smaller blocks. break; - case LZMA_FILTER_LZMA: + case LZMA_FILTER_LZMA1: // The block sizes of the possible next filters in // the chain are irrelevant after the LZMA filter. return ((lzma_options_lzma *)(filters->options)) diff --git a/src/liblzma/common/easy.c b/src/liblzma/common/easy.c index 7446bc79..d5e19525 100644 --- a/src/liblzma/common/easy.c +++ b/src/liblzma/common/easy.c @@ -23,6 +23,9 @@ struct lzma_coder_s { lzma_next_coder stream_encoder; + /// Options for LZMA2 + lzma_options_lzma opt_lzma; + /// We need to keep the filters array available in case /// LZMA_FULL_FLUSH is used. lzma_filter filters[5]; @@ -30,7 +33,7 @@ struct lzma_coder_s { static bool -easy_set_filters(lzma_filter *filters, uint32_t level) +easy_set_filters(lzma_coder *coder, uint32_t level) { bool error = false; @@ -40,9 +43,10 @@ easy_set_filters(lzma_filter *filters, uint32_t level) #ifdef HAVE_ENCODER_LZMA2 } else if (level <= 9) { - filters[0].id = LZMA_FILTER_LZMA2; - filters[0].options = (void *)(&lzma_preset_lzma[level - 1]); - filters[1].id = LZMA_VLI_UNKNOWN; + error = lzma_lzma_preset(&coder->opt_lzma, level - 1); + coder->filters[0].id = LZMA_FILTER_LZMA2; + coder->filters[0].options = &coder->opt_lzma; + coder->filters[1].id = LZMA_VLI_UNKNOWN; #endif } else { @@ -91,7 +95,7 @@ easy_encoder_init(lzma_next_coder *next, lzma_allocator *allocator, next->coder->stream_encoder = LZMA_NEXT_CODER_INIT; } - if (easy_set_filters(next->coder->filters, level)) + if (easy_set_filters(next->coder, level)) return LZMA_OPTIONS_ERROR; return lzma_stream_encoder_init(&next->coder->stream_encoder, @@ -116,9 +120,9 @@ lzma_easy_encoder(lzma_stream *strm, lzma_easy_level level) extern LZMA_API uint64_t lzma_easy_memory_usage(lzma_easy_level level) { - lzma_filter filters[5]; - if (easy_set_filters(filters, level)) + lzma_coder coder; + if (easy_set_filters(&coder, level)) return UINT32_MAX; - return lzma_memusage_encoder(filters); + return lzma_memusage_encoder(coder.filters); } diff --git a/src/liblzma/common/filter_common.c b/src/liblzma/common/filter_common.c index 7097ce51..71ceeca0 100644 --- a/src/liblzma/common/filter_common.c +++ b/src/liblzma/common/filter_common.c @@ -38,9 +38,9 @@ static const struct { bool changes_size; } features[] = { -#if defined (HAVE_ENCODER_LZMA) || defined(HAVE_DECODER_LZMA) +#if defined (HAVE_ENCODER_LZMA1) || defined(HAVE_DECODER_LZMA1) { - .id = LZMA_FILTER_LZMA, + .id = LZMA_FILTER_LZMA1, .non_last_ok = false, .last_ok = true, .changes_size = true, diff --git a/src/liblzma/common/filter_decoder.c b/src/liblzma/common/filter_decoder.c index 8b7e532f..241b272d 100644 --- a/src/liblzma/common/filter_decoder.c +++ b/src/liblzma/common/filter_decoder.c @@ -51,9 +51,9 @@ typedef struct { static const lzma_filter_decoder decoders[] = { -#ifdef HAVE_DECODER_LZMA +#ifdef HAVE_DECODER_LZMA1 { - .id = LZMA_FILTER_LZMA, + .id = LZMA_FILTER_LZMA1, .init = &lzma_lzma_decoder_init, .memusage = &lzma_lzma_decoder_memusage, .props_decode = &lzma_lzma_props_decode, diff --git a/src/liblzma/common/filter_encoder.c b/src/liblzma/common/filter_encoder.c index 550d5483..a839fe70 100644 --- a/src/liblzma/common/filter_encoder.c +++ b/src/liblzma/common/filter_encoder.c @@ -62,9 +62,9 @@ typedef struct { static const lzma_filter_encoder encoders[] = { -#ifdef HAVE_ENCODER_LZMA +#ifdef HAVE_ENCODER_LZMA1 { - .id = LZMA_FILTER_LZMA, + .id = LZMA_FILTER_LZMA1, .init = &lzma_lzma_encoder_init, .memusage = &lzma_lzma_encoder_memusage, .chunk_size = NULL, // FIXME diff --git a/src/liblzma/common/init_encoder.c b/src/liblzma/common/init_encoder.c index c5f12a91..1130e6b8 100644 --- a/src/liblzma/common/init_encoder.c +++ b/src/liblzma/common/init_encoder.c @@ -31,7 +31,7 @@ lzma_init_encoder(void) lzma_init_check(); -#if defined(HAVE_SMALL) && defined(HAVE_ENCODER_LZMA) +#if defined(HAVE_SMALL) && defined(HAVE_ENCODER_LZMA1) lzma_rc_init(); #endif diff --git a/src/liblzma/delta/delta_common.c b/src/liblzma/delta/delta_common.c index 86ef33be..90b5552b 100644 --- a/src/liblzma/delta/delta_common.c +++ b/src/liblzma/delta/delta_common.c @@ -50,17 +50,17 @@ lzma_delta_coder_init(lzma_next_coder *next, lzma_allocator *allocator, // Set the delta distance. if (filters[0].options == NULL) return LZMA_PROG_ERROR; - next->coder->distance = ((lzma_options_delta *)(filters[0].options)) - ->distance; - if (next->coder->distance < LZMA_DELTA_DISTANCE_MIN - || next->coder->distance > LZMA_DELTA_DISTANCE_MAX) + next->coder->distance + = ((lzma_options_delta *)(filters[0].options))->dist; + if (next->coder->distance < LZMA_DELTA_DIST_MIN + || next->coder->distance > LZMA_DELTA_DIST_MAX) return LZMA_OPTIONS_ERROR; // Initialize the rest of the variables. next->coder->pos = 0; - memzero(next->coder->history, LZMA_DELTA_DISTANCE_MAX); + memzero(next->coder->history, LZMA_DELTA_DIST_MAX); // Initialize the next decoder in the chain, if any. return lzma_next_filter_init(&next->coder->next, - allocator, filters + 1); + allocator, filters + 1); } diff --git a/src/liblzma/delta/delta_common.h b/src/liblzma/delta/delta_common.h index 1d58899d..e7b3eeda 100644 --- a/src/liblzma/delta/delta_common.h +++ b/src/liblzma/delta/delta_common.h @@ -33,7 +33,7 @@ struct lzma_coder_s { uint8_t pos; /// Buffer to hold history of the original data - uint8_t history[LZMA_DELTA_DISTANCE_MAX]; + uint8_t history[LZMA_DELTA_DIST_MAX]; }; diff --git a/src/liblzma/delta/delta_decoder.c b/src/liblzma/delta/delta_decoder.c index 80ef173a..26dc40fe 100644 --- a/src/liblzma/delta/delta_decoder.c +++ b/src/liblzma/delta/delta_decoder.c @@ -74,7 +74,7 @@ lzma_delta_props_decode(void **options, lzma_allocator *allocator, return LZMA_MEM_ERROR; opt->type = LZMA_DELTA_TYPE_BYTE; - opt->distance = props[0] + 1; + opt->dist = props[0] + 1; *options = opt; diff --git a/src/liblzma/delta/delta_encoder.c b/src/liblzma/delta/delta_encoder.c index 56afa90a..bb772a6c 100644 --- a/src/liblzma/delta/delta_encoder.c +++ b/src/liblzma/delta/delta_encoder.c @@ -109,11 +109,11 @@ lzma_delta_props_encode(const void *options, uint8_t *out) // It's possible that newer liblzma versions will support larger // distance values. if (opt->type != LZMA_DELTA_TYPE_BYTE - || opt->distance < LZMA_DELTA_DISTANCE_MIN - || opt->distance > LZMA_DELTA_DISTANCE_MAX) + || opt->dist < LZMA_DELTA_DIST_MIN + || opt->dist > LZMA_DELTA_DIST_MAX) return LZMA_OPTIONS_ERROR; - out[0] = opt->distance - LZMA_DELTA_DISTANCE_MIN; + out[0] = opt->dist - LZMA_DELTA_DIST_MIN; return LZMA_OK; } diff --git a/src/liblzma/lz/lz_encoder.c b/src/liblzma/lz/lz_encoder.c index 159080ee..d598f71a 100644 --- a/src/liblzma/lz/lz_encoder.c +++ b/src/liblzma/lz/lz_encoder.c @@ -189,15 +189,13 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, // For now, the dictionary size is limited to 1.5 GiB. This may grow // in the future if needed, but it needs a little more work than just // changing this check. - if (lz_options->dictionary_size < LZMA_DICTIONARY_SIZE_MIN - || lz_options->dictionary_size + if (lz_options->dict_size < LZMA_DICT_SIZE_MIN + || lz_options->dict_size > (UINT32_C(1) << 30) + (UINT32_C(1) << 29) - || lz_options->find_len_max - > lz_options->match_len_max) + || lz_options->nice_len > lz_options->match_len_max) return true; - mf->keep_size_before = lz_options->before_size - + lz_options->dictionary_size; + mf->keep_size_before = lz_options->before_size + lz_options->dict_size; mf->keep_size_after = lz_options->after_size + lz_options->match_len_max; @@ -213,7 +211,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, // to size_t. // - Memory usage calculation needs something too, e.g. use uint64_t // for mf->size. - uint32_t reserve = lz_options->dictionary_size / 2; + uint32_t reserve = lz_options->dict_size / 2; if (reserve > (UINT32_C(1) << 30)) reserve /= 2; @@ -232,7 +230,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, // Match finder options mf->match_len_max = lz_options->match_len_max; - mf->find_len_max = lz_options->find_len_max; + mf->nice_len = lz_options->nice_len; // cyclic_size has to stay smaller than 2 Gi. Note that this doesn't // mean limitting dictionary size to less than 2 GiB. With a match @@ -249,7 +247,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, // memory to keep the code simpler. The current way is simple and // still allows pretty big dictionaries, so I don't expect these // limits to change. - mf->cyclic_size = lz_options->dictionary_size + 1; + mf->cyclic_size = lz_options->dict_size + 1; // Validate the match finder ID and setup the function pointers. switch (lz_options->match_finder) { @@ -289,9 +287,9 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, } // Calculate the sizes of mf->hash and mf->son and check that - // find_len_max is big enough for the selected match finder. + // nice_len is big enough for the selected match finder. const uint32_t hash_bytes = lz_options->match_finder & 0x0F; - if (hash_bytes > mf->find_len_max) + if (hash_bytes > mf->nice_len) return true; const bool is_bt = (lz_options->match_finder & 0x10) != 0; @@ -302,7 +300,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, } else { // Round dictionary size up to the next 2^n - 1 so it can // be used as a hash mask. - hs = lz_options->dictionary_size - 1; + hs = lz_options->dict_size - 1; hs |= hs >> 1; hs |= hs >> 2; hs |= hs >> 4; @@ -353,11 +351,11 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator, } // Maximum number of match finder cycles - mf->loops = lz_options->match_finder_cycles; - if (mf->loops == 0) { - mf->loops = 16 + (mf->find_len_max / 2); + mf->depth = lz_options->depth; + if (mf->depth == 0) { + mf->depth = 16 + (mf->nice_len / 2); if (!is_bt) - mf->loops /= 2; + mf->depth /= 2; } return false; diff --git a/src/liblzma/lz/lz_encoder.h b/src/liblzma/lz/lz_encoder.h index 373cc01b..44880d77 100644 --- a/src/liblzma/lz/lz_encoder.h +++ b/src/liblzma/lz/lz_encoder.h @@ -110,13 +110,13 @@ struct lzma_mf_s { uint32_t hash_mask; /// Maximum number of loops in the match finder - uint32_t loops; + uint32_t depth; /// Maximum length of a match that the match finder will try to find. - uint32_t find_len_max; + uint32_t nice_len; /// Maximum length of a match supported by the LZ-based encoder. - /// If the longest match found by the match finder is find_len_max, + /// If the longest match found by the match finder is nice_len, /// mf_find() tries to expand it up to match_len_max bytes. uint32_t match_len_max; @@ -139,40 +139,40 @@ typedef struct { size_t before_size; /// Size of the history buffer - size_t dictionary_size; + size_t dict_size; /// Extra amount of data to keep available after the "actual" /// dictionary. size_t after_size; /// Maximum length of a match that the LZ-based encoder can accept. - /// This is used to extend matches of length find_len_max to the + /// This is used to extend matches of length nice_len to the /// maximum possible length. size_t match_len_max; /// Match finder will search matches of at maximum of this length. /// This must be less than or equal to match_len_max. - size_t find_len_max; + size_t nice_len; /// Type of the match finder to use lzma_match_finder match_finder; - /// TODO: Comment - uint32_t match_finder_cycles; + /// Maximum search depth + uint32_t depth; /// TODO: Comment - const uint8_t *preset_dictionary; + const uint8_t *preset_dict; - uint32_t preset_dictionary_size; + uint32_t preset_dict_size; } lzma_lz_options; // The total usable buffer space at any moment outside the match finder: -// before_size + dictionary_size + after_size + match_len_max +// before_size + dict_size + after_size + match_len_max // // In reality, there's some extra space allocated to prevent the number of -// memmove() calls reasonable. The bigger the dictionary_size is, the bigger +// memmove() calls reasonable. The bigger the dict_size is, the bigger // this extra buffer will be since with bigger dictionaries memmove() would // also take longer. // @@ -181,7 +181,7 @@ typedef struct { // In other words, a single encoder loop may advance lzma_mf.read_pos at // maximum of after_size times. Since matches are looked up to // lzma_mf.buffer[lzma_mf.read_pos + match_len_max - 1], the total -// amount of extra buffer needed after dictionary_size becomes +// amount of extra buffer needed after dict_size becomes // after_size + match_len_max. // // before_size has two uses. The first one is to keep literals available diff --git a/src/liblzma/lz/lz_encoder_mf.c b/src/liblzma/lz/lz_encoder_mf.c index d82681b3..9d50e91d 100644 --- a/src/liblzma/lz/lz_encoder_mf.c +++ b/src/liblzma/lz/lz_encoder_mf.c @@ -42,7 +42,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches) #ifndef NDEBUG // Validate the matches. for (uint32_t i = 0; i < count; ++i) { - assert(matches[i].len <= mf->find_len_max); + assert(matches[i].len <= mf->nice_len); assert(matches[i].dist < mf->read_pos); assert(memcmp(mf_ptr(mf) - 1, mf_ptr(mf) - matches[i].dist - 2, @@ -56,7 +56,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches) // If a match of maximum search length was found, try to // extend the match to maximum possible length. - if (len_best == mf->find_len_max) { + if (len_best == mf->nice_len) { // The limit for the match length is either the // maximum match length supported by the LZ-based // encoder or the number of bytes left in the @@ -90,7 +90,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches) /// Hash value to indicate unused element in the hash. Since we start the -/// positions from dictionary_size + 1, zero is always too far to qualify +/// positions from dict_size + 1, zero is always too far to qualify /// as usable match position. #define EMPTY_HASH_VALUE 0 @@ -166,7 +166,7 @@ move_pos(lzma_mf *mf) } -/// When flushing, we cannot run the match finder unless there is find_len_max +/// When flushing, we cannot run the match finder unless there is nice_len /// bytes available in the dictionary. Instead, we skip running the match /// finder (indicating that no match was found), and count how many bytes we /// have ignored this way. @@ -196,8 +196,8 @@ move_pending(lzma_mf *mf) /// in them. #define header(is_bt, len_min, ret_op) \ uint32_t len_limit = mf_avail(mf); \ - if (mf->find_len_max <= len_limit) { \ - len_limit = mf->find_len_max; \ + if (mf->nice_len <= len_limit) { \ + len_limit = mf->nice_len; \ } else if (len_limit < (len_min) \ || (is_bt && mf->action == LZMA_SYNC_FLUSH)) { \ assert(mf->action != LZMA_RUN); \ @@ -226,7 +226,7 @@ move_pending(lzma_mf *mf) /// of matches found. #define call_find(func, len_best) \ do { \ - matches_count = func(len_limit, pos, cur, cur_match, mf->loops, \ + matches_count = func(len_limit, pos, cur, cur_match, mf->depth, \ mf->son, mf->cyclic_pos, mf->cyclic_size, \ matches + matches_count, len_best) \ - matches; \ @@ -246,7 +246,7 @@ do { \ /// \param pos lzma_mf.read_pos + lzma_mf.offset /// \param cur Pointer to current byte (mf_ptr(mf)) /// \param cur_match Start position of the current match candidate -/// \param loops Maximum length of the hash chain +/// \param depth Maximum length of the hash chain /// \param son lzma_mf.son (contains the hash chain) /// \param cyclic_pos /// \param cyclic_size @@ -258,7 +258,7 @@ hc_find_func( const uint32_t pos, const uint8_t *const cur, uint32_t cur_match, - uint32_t loops, + uint32_t depth, uint32_t *const son, const uint32_t cyclic_pos, const uint32_t cyclic_size, @@ -269,7 +269,7 @@ hc_find_func( while (true) { const uint32_t delta = pos - cur_match; - if (loops-- == 0 || delta >= cyclic_size) + if (depth-- == 0 || delta >= cyclic_size) return matches; const uint8_t *const pb = cur - delta; @@ -463,7 +463,7 @@ bt_find_func( const uint32_t pos, const uint8_t *const cur, uint32_t cur_match, - uint32_t loops, + uint32_t depth, uint32_t *const son, const uint32_t cyclic_pos, const uint32_t cyclic_size, @@ -478,7 +478,7 @@ bt_find_func( while (true) { const uint32_t delta = pos - cur_match; - if (loops-- == 0 || delta >= cyclic_size) { + if (depth-- == 0 || delta >= cyclic_size) { *ptr0 = EMPTY_HASH_VALUE; *ptr1 = EMPTY_HASH_VALUE; return matches; @@ -531,7 +531,7 @@ bt_skip_func( const uint32_t pos, const uint8_t *const cur, uint32_t cur_match, - uint32_t loops, + uint32_t depth, uint32_t *const son, const uint32_t cyclic_pos, const uint32_t cyclic_size) @@ -544,7 +544,7 @@ bt_skip_func( while (true) { const uint32_t delta = pos - cur_match; - if (loops-- == 0 || delta >= cyclic_size) { + if (depth-- == 0 || delta >= cyclic_size) { *ptr0 = EMPTY_HASH_VALUE; *ptr1 = EMPTY_HASH_VALUE; return; @@ -588,7 +588,7 @@ bt_skip_func( #define bt_skip() \ do { \ - bt_skip_func(len_limit, pos, cur, cur_match, mf->loops, \ + bt_skip_func(len_limit, pos, cur, cur_match, mf->depth, \ mf->son, mf->cyclic_pos, \ mf->cyclic_size); \ move_pos(mf); \ diff --git a/src/liblzma/lzma/Makefile.am b/src/liblzma/lzma/Makefile.am index bcc1fdc6..ec6b7b27 100644 --- a/src/liblzma/lzma/Makefile.am +++ b/src/liblzma/lzma/Makefile.am @@ -24,7 +24,7 @@ liblzma2_la_CPPFLAGS = \ liblzma2_la_SOURCES = lzma_common.h -if COND_ENCODER_LZMA +if COND_ENCODER_LZMA1 liblzma2_la_SOURCES += \ fastpos.h \ lzma_encoder.h \ @@ -39,7 +39,7 @@ liblzma2_la_SOURCES += fastpos_table.c endif endif -if COND_DECODER_LZMA +if COND_DECODER_LZMA1 liblzma2_la_SOURCES += \ lzma_decoder.c \ lzma_decoder.h diff --git a/src/liblzma/lzma/lzma2_decoder.c b/src/liblzma/lzma/lzma2_decoder.c index 88e73fb6..af1da746 100644 --- a/src/liblzma/lzma/lzma2_decoder.c +++ b/src/liblzma/lzma/lzma2_decoder.c @@ -303,14 +303,14 @@ lzma_lzma2_props_decode(void **options, lzma_allocator *allocator, return LZMA_MEM_ERROR; if (props[0] == 40) { - opt->dictionary_size = UINT32_MAX; + opt->dict_size = UINT32_MAX; } else { - opt->dictionary_size = 2 | (props[0] & 1); - opt->dictionary_size <<= props[0] / 2 + 11; + opt->dict_size = 2 | (props[0] & 1); + opt->dict_size <<= props[0] / 2 + 11; } - opt->preset_dictionary = NULL; - opt->preset_dictionary_size = 0; + opt->preset_dict = NULL; + opt->preset_dict_size = 0; *options = opt; diff --git a/src/liblzma/lzma/lzma2_encoder.c b/src/liblzma/lzma/lzma2_encoder.c index b2cd176b..757b871d 100644 --- a/src/liblzma/lzma/lzma2_encoder.c +++ b/src/liblzma/lzma/lzma2_encoder.c @@ -178,19 +178,13 @@ lzma2_encode(lzma_coder *restrict coder, lzma_mf *restrict mf, // Look if there are new options. At least for now, // only lc/lp/pb can be changed. if (coder->opt_new != NULL - && (coder->opt_cur.literal_context_bits - != coder->opt_new->literal_context_bits - || coder->opt_cur.literal_pos_bits - != coder->opt_new->literal_pos_bits - || coder->opt_cur.pos_bits - != coder->opt_new->pos_bits)) { + && (coder->opt_cur.lc != coder->opt_new->lc + || coder->opt_cur.lp != coder->opt_new->lp + || coder->opt_cur.pb != coder->opt_new->pb)) { // Options have been changed, copy them to opt_cur. - coder->opt_cur.literal_context_bits - = coder->opt_new->literal_context_bits; - coder->opt_cur.literal_pos_bits - = coder->opt_new->literal_pos_bits; - coder->opt_cur.pos_bits - = coder->opt_new->pos_bits; + coder->opt_cur.lc = coder->opt_new->lc; + coder->opt_cur.lp = coder->opt_new->lp; + coder->opt_cur.pb = coder->opt_new->pb; // We need to write the new options and reset // the encoder state. @@ -352,10 +346,9 @@ lzma2_encoder_init(lzma_lz_encoder *lz, lzma_allocator *allocator, // compressed size of a chunk is not smaller than the uncompressed // size, so we need to have at least LZMA2_COMPRESSED_MAX bytes // history available. - if (lz_options->before_size + lz_options->dictionary_size - < LZMA2_CHUNK_MAX) - lz_options->before_size = LZMA2_CHUNK_MAX - - lz_options->dictionary_size; + if (lz_options->before_size + lz_options->dict_size < LZMA2_CHUNK_MAX) + lz_options->before_size + = LZMA2_CHUNK_MAX - lz_options->dict_size; return LZMA_OK; } @@ -385,7 +378,7 @@ extern lzma_ret lzma_lzma2_props_encode(const void *options, uint8_t *out) { const lzma_options_lzma *const opt = options; - uint32_t d = MAX(opt->dictionary_size, LZMA_DICTIONARY_SIZE_MIN); + uint32_t d = MAX(opt->dict_size, LZMA_DICT_SIZE_MIN); // Round up to to the next 2^n - 1 or 2^n + 2^(n - 1) - 1 depending // on which one is the next: diff --git a/src/liblzma/lzma/lzma_common.h b/src/liblzma/lzma/lzma_common.h index 6909969b..546bf89e 100644 --- a/src/liblzma/lzma/lzma_common.h +++ b/src/liblzma/lzma/lzma_common.h @@ -32,20 +32,16 @@ /// Maximum number of position states. A position state is the lowest pos bits /// number of bits of the current uncompressed offset. In some places there /// are different sets of probabilities for different pos states. -#define POS_STATES_MAX (1 << LZMA_POS_BITS_MAX) +#define POS_STATES_MAX (1 << LZMA_PB_MAX) -/// Validates literal_context_bits, literal_pos_bits, and pos_bits. +/// Validates lc, lp, and pb. static inline bool is_lclppb_valid(const lzma_options_lzma *options) { - return options->literal_context_bits <= LZMA_LITERAL_CONTEXT_BITS_MAX - && options->literal_pos_bits - <= LZMA_LITERAL_POS_BITS_MAX - && options->literal_context_bits - + options->literal_pos_bits - <= LZMA_LITERAL_BITS_MAX - && options->pos_bits <= LZMA_POS_BITS_MAX; + return options->lc <= LZMA_LCLP_MAX && options->lp <= LZMA_LCLP_MAX + && options->lc + options->lp <= LZMA_LCLP_MAX + && options->pb <= LZMA_PB_MAX; } @@ -126,7 +122,7 @@ typedef enum { #define LITERAL_CODER_SIZE 0x300 /// Maximum number of literal coders -#define LITERAL_CODERS_MAX (1 << LZMA_LITERAL_BITS_MAX) +#define LITERAL_CODERS_MAX (1 << LZMA_LCLP_MAX) /// Locate the literal coder for the next literal byte. The choice depends on /// - the lowest literal_pos_bits bits of the position of the current @@ -138,13 +134,11 @@ typedef enum { static inline void literal_init(probability (*probs)[LITERAL_CODER_SIZE], - uint32_t literal_context_bits, uint32_t literal_pos_bits) + uint32_t lc, uint32_t lp) { - assert(literal_context_bits + literal_pos_bits - <= LZMA_LITERAL_BITS_MAX); + assert(lc + lp <= LZMA_LCLP_MAX); - const uint32_t coders - = 1U << (literal_context_bits + literal_pos_bits); + const uint32_t coders = 1U << (lc + lp); for (uint32_t i = 0; i < coders; ++i) for (uint32_t j = 0; j < LITERAL_CODER_SIZE; ++j) @@ -219,7 +213,7 @@ literal_init(probability (*probs)[LITERAL_CODER_SIZE], // fastpos.h to understand why). #define END_POS_MODEL_INDEX 14 -// Seven-bit distances use the full FIXME +// Pos slots that indicate a distance <= 127. #define FULL_DISTANCES_BITS (END_POS_MODEL_INDEX / 2) #define FULL_DISTANCES (1 << FULL_DISTANCES_BITS) diff --git a/src/liblzma/lzma/lzma_decoder.c b/src/liblzma/lzma/lzma_decoder.c index 0fa62c66..df3371e2 100644 --- a/src/liblzma/lzma/lzma_decoder.c +++ b/src/liblzma/lzma/lzma_decoder.c @@ -231,7 +231,7 @@ struct lzma_coder_s { uint32_t rep2; ///< Distance of third latest match uint32_t rep3; ///< Distance of fourth latest match - uint32_t pos_mask; // (1U << pos_bits) - 1 + uint32_t pos_mask; // (1U << pb) - 1 uint32_t literal_context_bits; uint32_t literal_pos_mask; @@ -866,14 +866,13 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt) // FIXME? // Calculate pos_mask. We don't need pos_bits as is for anything. - coder->pos_mask = (1U << options->pos_bits) - 1; + coder->pos_mask = (1U << options->pb) - 1; // Initialize the literal decoder. - literal_init(coder->literal, options->literal_context_bits, - options->literal_pos_bits); + literal_init(coder->literal, options->lc, options->lp); - coder->literal_context_bits = options->literal_context_bits; - coder->literal_pos_mask = (1 << options->literal_pos_bits) - 1; + coder->literal_context_bits = options->lc; + coder->literal_pos_mask = (1U << options->lp) - 1; // State coder->state = STATE_LIT_LIT; @@ -881,7 +880,7 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt) coder->rep1 = 0; coder->rep2 = 0; coder->rep3 = 0; - coder->pos_mask = (1 << options->pos_bits) - 1; + coder->pos_mask = (1U << options->pb) - 1; // Range decoder rc_reset(coder->rc); @@ -908,7 +907,7 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt) bittree_reset(coder->pos_align, ALIGN_BITS); // Len decoders (also bit/bittree) - const uint32_t num_pos_states = 1 << options->pos_bits; + const uint32_t num_pos_states = 1U << options->pb; bit_reset(coder->match_len_decoder.choice); bit_reset(coder->match_len_decoder.choice2); bit_reset(coder->rep_len_decoder.choice); @@ -957,7 +956,7 @@ lzma_lzma_decoder_create(lzma_lz_decoder *lz, lzma_allocator *allocator, // All dictionary sizes are OK here. LZ decoder will take care of // the special cases. const lzma_options_lzma *options = opt; - *dict_size = options->dictionary_size; + *dict_size = options->dict_size; return LZMA_OK; } @@ -1003,13 +1002,12 @@ lzma_lzma_lclppb_decode(lzma_options_lzma *options, uint8_t byte) return true; // See the file format specification to understand this. - options->pos_bits = byte / (9 * 5); - byte -= options->pos_bits * 9 * 5; - options->literal_pos_bits = byte / 9; - options->literal_context_bits = byte - options->literal_pos_bits * 9; + options->pb = byte / (9 * 5); + byte -= options->pb * 9 * 5; + options->lp = byte / 9; + options->lc = byte - options->lp * 9; - return options->literal_context_bits + options->literal_pos_bits - > LZMA_LITERAL_BITS_MAX; + return options->lc + options->lp > LZMA_LCLP_MAX; } @@ -1017,8 +1015,7 @@ extern uint64_t lzma_lzma_decoder_memusage(const void *options) { const lzma_options_lzma *const opt = options; - const uint64_t lz_memusage - = lzma_lz_decoder_memusage(opt->dictionary_size); + const uint64_t lz_memusage = lzma_lz_decoder_memusage(opt->dict_size); if (lz_memusage == UINT64_MAX) return UINT64_MAX; @@ -1044,10 +1041,10 @@ lzma_lzma_props_decode(void **options, lzma_allocator *allocator, // All dictionary sizes are accepted, including zero. LZ decoder // will automatically use a dictionary at least a few KiB even if // a smaller dictionary is requested. - opt->dictionary_size = integer_read_32(props + 1); + opt->dict_size = integer_read_32(props + 1); - opt->preset_dictionary = NULL; - opt->preset_dictionary_size = 0; + opt->preset_dict = NULL; + opt->preset_dict_size = 0; *options = opt; diff --git a/src/liblzma/lzma/lzma_encoder.c b/src/liblzma/lzma/lzma_encoder.c index 02b7d19a..2f81bedc 100644 --- a/src/liblzma/lzma/lzma_encoder.c +++ b/src/liblzma/lzma/lzma_encoder.c @@ -428,14 +428,14 @@ set_lz_options(lzma_lz_options *lz_options, const lzma_options_lzma *options) // LZ encoder initialization does the validation, also when just // calculating memory usage, so we don't need to validate here. lz_options->before_size = OPTS; - lz_options->dictionary_size = options->dictionary_size; + lz_options->dict_size = options->dict_size; lz_options->after_size = LOOP_INPUT_MAX; lz_options->match_len_max = MATCH_LEN_MAX; - lz_options->find_len_max = options->fast_bytes; - lz_options->match_finder = options->match_finder; - lz_options->match_finder_cycles = options->match_finder_cycles; - lz_options->preset_dictionary = options->preset_dictionary; - lz_options->preset_dictionary_size = options->preset_dictionary_size; + lz_options->nice_len = options->nice_len; + lz_options->match_finder = options->mf; + lz_options->depth = options->depth; + lz_options->preset_dict = options->preset_dict; + lz_options->preset_dict_size = options->preset_dict_size; } @@ -467,9 +467,9 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options) { assert(!coder->is_flushed); - coder->pos_mask = (1U << options->pos_bits) - 1; - coder->literal_context_bits = options->literal_context_bits; - coder->literal_pos_mask = (1U << options->literal_pos_bits) - 1; + coder->pos_mask = (1U << options->pb) - 1; + coder->literal_context_bits = options->lc; + coder->literal_pos_mask = (1U << options->lp) - 1; // Range coder rc_reset(&coder->rc); @@ -479,8 +479,7 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options) for (size_t i = 0; i < REP_DISTANCES; ++i) coder->reps[i] = 0; - literal_init(coder->literal, options->literal_context_bits, - options->literal_pos_bits); + literal_init(coder->literal, options->lc, options->lp); // Bit encoders for (size_t i = 0; i < STATES; ++i) { @@ -506,10 +505,10 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options) // Length encoders length_encoder_reset(&coder->match_len_encoder, - 1U << options->pos_bits, coder->fast_mode); + 1U << options->pb, coder->fast_mode); length_encoder_reset(&coder->rep_len_encoder, - 1U << options->pos_bits, coder->fast_mode); + 1U << options->pb, coder->fast_mode); // Price counts are incremented every time appropriate probabilities // are changed. price counts are set to zero when the price tables @@ -546,8 +545,8 @@ lzma_lzma_encoder_create(lzma_coder **coder_ptr, lzma_allocator *allocator, // Validate some of the options. LZ encoder validates fast_bytes too // but we need a valid value here earlier. - if (!is_lclppb_valid(options) || options->fast_bytes < MATCH_LEN_MIN - || options->fast_bytes > MATCH_LEN_MAX) + if (!is_lclppb_valid(options) || options->nice_len < MATCH_LEN_MIN + || options->nice_len > MATCH_LEN_MAX) return LZMA_OPTIONS_ERROR; // Set compression mode. @@ -562,17 +561,16 @@ lzma_lzma_encoder_create(lzma_coder **coder_ptr, lzma_allocator *allocator, // Set dist_table_size. // Round the dictionary size up to next 2^n. uint32_t log_size = 0; - while ((UINT32_C(1) << log_size) - < options->dictionary_size) + while ((UINT32_C(1) << log_size) < options->dict_size) ++log_size; coder->dist_table_size = log_size * 2; // Length encoders' price table size coder->match_len_encoder.table_size - = options->fast_bytes + 1 - MATCH_LEN_MIN; + = options->nice_len + 1 - MATCH_LEN_MIN; coder->rep_len_encoder.table_size - = options->fast_bytes + 1 - MATCH_LEN_MIN; + = options->nice_len + 1 - MATCH_LEN_MIN; break; } @@ -627,24 +625,17 @@ lzma_lzma_encoder_memusage(const void *options) extern bool lzma_lzma_lclppb_encode(const lzma_options_lzma *options, uint8_t *byte) { - if (options->literal_context_bits > LZMA_LITERAL_CONTEXT_BITS_MAX - || options->literal_pos_bits - > LZMA_LITERAL_POS_BITS_MAX - || options->pos_bits > LZMA_POS_BITS_MAX - || options->literal_context_bits - + options->literal_pos_bits - > LZMA_LITERAL_BITS_MAX) + if (!is_lclppb_valid(options)) return true; - *byte = (options->pos_bits * 5 + options->literal_pos_bits) * 9 - + options->literal_context_bits; + *byte = (options->pb * 5 + options->lp) * 9 + options->lc; assert(*byte <= (4 * 5 + 4) * 9 + 8); return false; } -#ifdef HAVE_ENCODER_LZMA +#ifdef HAVE_ENCODER_LZMA1 extern lzma_ret lzma_lzma_props_encode(const void *options, uint8_t *out) { @@ -653,7 +644,7 @@ lzma_lzma_props_encode(const void *options, uint8_t *out) if (lzma_lzma_lclppb_encode(opt, out)) return LZMA_PROG_ERROR; - integer_write_32(out + 1, opt->dictionary_size); + integer_write_32(out + 1, opt->dict_size); return LZMA_OK; } diff --git a/src/liblzma/lzma/lzma_encoder_optimum_fast.c b/src/liblzma/lzma/lzma_encoder_optimum_fast.c index 9da7e79e..4e8e26a2 100644 --- a/src/liblzma/lzma/lzma_encoder_optimum_fast.c +++ b/src/liblzma/lzma/lzma_encoder_optimum_fast.c @@ -38,7 +38,7 @@ extern void lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf, uint32_t *restrict back_res, uint32_t *restrict len_res) { - const uint32_t fast_bytes = mf->find_len_max; + const uint32_t nice_len = mf->nice_len; uint32_t len_main; uint32_t matches_count; @@ -79,8 +79,8 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf, && buf[len] == buf_back[len]; ++len) ; // If we have found a repeated match that is at least - // fast_bytes long, return it immediatelly. - if (len >= fast_bytes) { + // nice_len long, return it immediatelly. + if (len >= nice_len) { *back_res = i; *len_res = len; mf_skip(mf, len - 1); @@ -94,8 +94,8 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf, } // We didn't find a long enough repeated match. Encode it as a normal - // match if the match length is at least fast_bytes. - if (len_main >= fast_bytes) { + // match if the match length is at least nice_len. + if (len_main >= nice_len) { *back_res = coder->matches[matches_count - 1].dist + REP_DISTANCES; *len_res = len_main; diff --git a/src/liblzma/lzma/lzma_encoder_optimum_normal.c b/src/liblzma/lzma/lzma_encoder_optimum_normal.c index f0dd92c9..7071a433 100644 --- a/src/liblzma/lzma/lzma_encoder_optimum_normal.c +++ b/src/liblzma/lzma/lzma_encoder_optimum_normal.c @@ -281,7 +281,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf, uint32_t *restrict back_res, uint32_t *restrict len_res, uint32_t position) { - const uint32_t fast_bytes = mf->find_len_max; + const uint32_t nice_len = mf->nice_len; uint32_t len_main; uint32_t matches_count; @@ -324,7 +324,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf, rep_max_index = i; } - if (rep_lens[rep_max_index] >= fast_bytes) { + if (rep_lens[rep_max_index] >= nice_len) { *back_res = rep_max_index; *len_res = rep_lens[rep_max_index]; mf_skip(mf, *len_res - 1); @@ -332,7 +332,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf, } - if (len_main >= fast_bytes) { + if (len_main >= nice_len) { *back_res = coder->matches[matches_count - 1].dist + REP_DISTANCES; *len_res = len_main; @@ -457,7 +457,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf, static inline uint32_t helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf, uint32_t len_end, uint32_t position, const uint32_t cur, - const uint32_t fast_bytes, const uint32_t buf_avail_full) + const uint32_t nice_len, const uint32_t buf_avail_full) { uint32_t matches_count = coder->matches_count; uint32_t new_len = coder->longest_match_length; @@ -572,12 +572,12 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf, if (buf_avail_full < 2) return len_end; - const uint32_t buf_avail = MIN(buf_avail_full, fast_bytes); + const uint32_t buf_avail = MIN(buf_avail_full, nice_len); if (!next_is_literal && match_byte != current_byte) { // speed optimization // try literal + rep0 const uint8_t *const buf_back = buf - reps[0] - 1; - const uint32_t limit = MIN(buf_avail_full, fast_bytes + 1); + const uint32_t limit = MIN(buf_avail_full, nice_len + 1); uint32_t len_test = 1; while (len_test < limit && buf[len_test] == buf_back[len_test]) @@ -656,7 +656,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf, uint32_t len_test_2 = len_test + 1; const uint32_t limit = MIN(buf_avail_full, - len_test_2 + fast_bytes); + len_test_2 + nice_len); for (; len_test_2 < limit && buf[len_test_2] == buf_back[len_test_2]; ++len_test_2) ; @@ -751,7 +751,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf, const uint8_t *const buf_back = buf - cur_back - 1; uint32_t len_test_2 = len_test + 1; const uint32_t limit = MIN(buf_avail_full, - len_test_2 + fast_bytes); + len_test_2 + nice_len); for (; len_test_2 < limit && buf[len_test_2] == buf_back[len_test_2]; @@ -862,11 +862,11 @@ lzma_lzma_optimum_normal(lzma_coder *restrict coder, lzma_mf *restrict mf, coder->longest_match_length = mf_find( mf, &coder->matches_count, coder->matches); - if (coder->longest_match_length >= mf->find_len_max) + if (coder->longest_match_length >= mf->nice_len) break; len_end = helper2(coder, reps, mf_ptr(mf) - 1, len_end, - position + cur, cur, mf->find_len_max, + position + cur, cur, mf->nice_len, MIN(mf_avail(mf) + 1, OPTS - 1 - cur)); } diff --git a/src/liblzma/lzma/lzma_encoder_presets.c b/src/liblzma/lzma/lzma_encoder_presets.c index 08f339e9..7ef3509e 100644 --- a/src/liblzma/lzma/lzma_encoder_presets.c +++ b/src/liblzma/lzma/lzma_encoder_presets.c @@ -20,10 +20,11 @@ #include "common.h" +/* #define pow2(e) (UINT32_C(1) << (e)) -LZMA_API const lzma_options_lzma lzma_preset_lzma[9] = { +static const lzma_options_lzma presets[9] = { // dict lc lp pb mode fb mf mfc { pow2(16), NULL, 0, 3, 0, 2, false, LZMA_MODE_FAST, 64, LZMA_MF_HC3, 0, 0, 0, 0, 0, NULL, NULL }, { pow2(20), NULL, 0, 3, 0, 0, false, LZMA_MODE_FAST, 64, LZMA_MF_HC4, 0, 0, 0, 0, 0, NULL, NULL }, @@ -37,30 +38,43 @@ LZMA_API const lzma_options_lzma lzma_preset_lzma[9] = { }; -/* extern LZMA_API lzma_bool -lzma_preset_lzma(lzma_options_lzma *options, uint32_t level) +lzma_lzma_preset(lzma_options_lzma *options, uint32_t level) { - *options = (lzma_options_lzma){ + if (level >= ARRAY_SIZE(presetes)) + return true; - }; + *options = presets[level]; + return false; +} +*/ - options->literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT - options->literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT; - options->pos_bits = LZMA_POS_BITS_DEFAULT; - options->preset_dictionary = NULL; - options->preset_dictionary_size = 0; - options->persistent = false; - options->mode = level <= 2 ? LZMA_MODE_FAST : LZMA_MODE_NORMAL; - options->fast_bytes = level <= +extern LZMA_API lzma_bool +lzma_lzma_preset(lzma_options_lzma *options, uint32_t level) +{ + if (level >= 9) + return true; + + memzero(options, sizeof(*options)); - options->match_finder = level == 1 ? LZMA_MF_HC3 - : (level == 2 ? LZMA_MF_HC4 : LZMA_MF_BT4); - options->match_finder_cycles = 0; + static const uint8_t shift[9] = { 16, 20, 19, 20, 21, 22, 23, 24, 25 }; + options->dict_size = UINT32_C(1) << shift[level]; + options->preset_dict = NULL; + options->preset_dict_size = 0; + options->lc = LZMA_LC_DEFAULT; + options->lp = LZMA_LP_DEFAULT; + options->pb = LZMA_PB_DEFAULT; - options->dictionary_size = + options->persistent = false; + options->mode = level <= 2 ? LZMA_MODE_FAST : LZMA_MODE_NORMAL; + + options->nice_len = level <= 5 ? 32 : 64; + options->mf = level <= 1 ? LZMA_MF_HC3 : level <= 2 ? LZMA_MF_HC4 + : LZMA_MF_BT4; + options->depth = 0; + + return false; } -*/ diff --git a/src/liblzma/rangecoder/Makefile.am b/src/liblzma/rangecoder/Makefile.am index f6824292..b2e62d4a 100644 --- a/src/liblzma/rangecoder/Makefile.am +++ b/src/liblzma/rangecoder/Makefile.am @@ -21,7 +21,7 @@ librangecoder_la_CPPFLAGS = \ -I@top_srcdir@/src/liblzma/api \ -I@top_srcdir@/src/liblzma/common -if COND_ENCODER_LZMA +if COND_ENCODER_LZMA1 librangecoder_la_SOURCES += \ range_encoder.h \ price.h @@ -32,6 +32,6 @@ librangecoder_la_SOURCES += price_table.c endif endif -if COND_DECODER_LZMA +if COND_DECODER_LZMA1 librangecoder_la_SOURCES += range_decoder.h endif diff --git a/src/liblzma/subblock/subblock_decoder.c b/src/liblzma/subblock/subblock_decoder.c index 41dbe389..7cf06988 100644 --- a/src/liblzma/subblock/subblock_decoder.c +++ b/src/liblzma/subblock/subblock_decoder.c @@ -291,7 +291,7 @@ decode_buffer(lzma_coder *coder, lzma_allocator *allocator, // Optimization: We know that LZMA uses End of Payload Marker // (not End of Input), so we can omit the helper filter. - if (filters[0].id == LZMA_FILTER_LZMA) + if (filters[0].id == LZMA_FILTER_LZMA1) filters[1].id = LZMA_VLI_UNKNOWN; return_if_error(lzma_raw_decoder_init( diff --git a/src/lzma/args.c b/src/lzma/args.c index 2ddb93ed..ddaa0f91 100644 --- a/src/lzma/args.c +++ b/src/lzma/args.c @@ -124,7 +124,7 @@ static const struct option long_opts[] = { static void add_filter(lzma_vli id, const char *opt_str) { - if (filter_count == 7) { + if (filter_count == LZMA_BLOCK_FILTERS_MAX) { errmsg(V_ERROR, _("Maximum number of filters is seven")); my_exit(ERROR); } @@ -142,7 +142,7 @@ add_filter(lzma_vli id, const char *opt_str) = parse_options_delta(opt_str); break; - case LZMA_FILTER_LZMA: + case LZMA_FILTER_LZMA1: case LZMA_FILTER_LZMA2: opt_filters[filter_count].options = parse_options_lzma(opt_str); @@ -301,7 +301,7 @@ parse_real(int argc, char **argv) break; case OPT_LZMA1: - add_filter(LZMA_FILTER_LZMA, optarg); + add_filter(LZMA_FILTER_LZMA1, optarg); break; case OPT_LZMA2: @@ -452,11 +452,17 @@ parse_environment(void) static void set_compression_settings(void) { + static lzma_options_lzma opt_lzma; + if (filter_count == 0) { + if (lzma_lzma_preset(&opt_lzma, preset_number)) { + errmsg(V_ERROR, _("Internal error (bug)")); + my_exit(ERROR); + } + opt_filters[0].id = opt_header == HEADER_ALONE - ? LZMA_FILTER_LZMA : LZMA_FILTER_LZMA2; - opt_filters[0].options = (lzma_options_lzma *)( - lzma_preset_lzma + preset_number); + ? LZMA_FILTER_LZMA1 : LZMA_FILTER_LZMA2; + opt_filters[0].options = &opt_lzma; filter_count = 1; } @@ -466,12 +472,14 @@ set_compression_settings(void) // If we are using the LZMA_Alone format, allow exactly one filter // which has to be LZMA. if (opt_header == HEADER_ALONE && (filter_count != 1 - || opt_filters[0].id != LZMA_FILTER_LZMA)) { - errmsg(V_ERROR, _("With --format=alone only the LZMA filter " + || opt_filters[0].id != LZMA_FILTER_LZMA1)) { + errmsg(V_ERROR, _("With --format=alone only the LZMA1 filter " "is supported")); my_exit(ERROR); } + // TODO: liblzma probably needs an API to validate the filter chain. + // If using --format=raw, we can be decoding. uint64_t memory_usage = opt_mode == MODE_COMPRESS ? lzma_memusage_encoder(opt_filters) @@ -488,10 +496,11 @@ set_compression_settings(void) my_exit(ERROR); } - --preset_number; - opt_filters[0].options = (lzma_options_lzma *)( - lzma_preset_lzma - + preset_number); + if (lzma_lzma_preset(&opt_lzma, --preset_number)) { + errmsg(V_ERROR, _("Internal error (bug)")); + my_exit(ERROR); + } + memory_usage = lzma_memusage_encoder(opt_filters); } } else { diff --git a/src/lzma/help.c b/src/lzma/help.c index d4888653..0b530ff5 100644 --- a/src/lzma/help.c +++ b/src/lzma/help.c @@ -82,13 +82,13 @@ show_help(void) " --lzma1=[OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" " --lzma2=[OPTS] more of the following options (valid values; default):\n" " dict=NUM dictionary size in bytes (1 - 1GiB; 8MiB)\n" -" lc=NUM number of literal context bits (0-8; 3)\n" +" lc=NUM number of literal context bits (0-4; 3)\n" " lp=NUM number of literal position bits (0-4; 0)\n" " pb=NUM number of position bits (0-4; 2)\n" " mode=MODE compression mode (`fast' or `best'; `best')\n" -" fb=NUM number of fast bytes (5-273; 128)\n" +" nice=NUM nice length of a match (2-273; 64)\n" " mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" -" mfc=NUM match finder cycles; 0=automatic (default)\n" +" depth=NUM maximum search depth; 0=automatic (default)\n" "\n" " --x86 x86 filter (sometimes called BCJ filter)\n" " --powerpc PowerPC (big endian) filter\n" @@ -98,14 +98,13 @@ show_help(void) " --sparc SPARC filter\n" "\n" " --delta=[OPTS] Delta filter; valid OPTS (valid values; default):\n" -" distance=NUM Distance between bytes being\n" -" subtracted from each other (1-256; 1)\n" +" dist=NUM distance between bytes being subtracted\n" +" from each other (1-256; 1)\n" "\n" -" --copy No filtering (useful only when specified alone)\n" " --subblock=[OPTS] Subblock filter; valid OPTS (valid values; default):\n" -" size=NUM number of bytes of data per subblock\n" -" (1 - 256Mi; 4Ki)\n" -" rle=NUM run-length encoder chunk size (0-256; 0)\n" +" size=NUM number of bytes of data per subblock\n" +" (1 - 256Mi; 4Ki)\n" +" rle=NUM run-length encoder chunk size (0-256; 0)\n" )); puts(_( diff --git a/src/lzma/options.c b/src/lzma/options.c index b2ec200e..f5ebdd8e 100644 --- a/src/lzma/options.c +++ b/src/lzma/options.c @@ -81,8 +81,7 @@ parse_options(const char *str, const option_map *opts, if (value == NULL || value[0] == '\0') { errmsg(V_ERROR, _("%s: Options must be `name=value' " - "pairs separated with commas"), - str); + "pairs separated with commas"), str); my_exit(ERROR); } @@ -201,7 +200,7 @@ parse_options_subblock(const char *str) /////////// enum { - OPT_DISTANCE, + OPT_DIST, }; @@ -210,8 +209,8 @@ set_delta(void *options, uint32_t key, uint64_t value) { lzma_options_delta *opt = options; switch (key) { - case OPT_DISTANCE: - opt->distance = value; + case OPT_DIST: + opt->dist = value; break; } } @@ -221,15 +220,16 @@ extern lzma_options_delta * parse_options_delta(const char *str) { static const option_map opts[] = { - { "distance", NULL, LZMA_DELTA_DISTANCE_MIN, - LZMA_DELTA_DISTANCE_MAX }, + { "dist", NULL, LZMA_DELTA_DIST_MIN, + LZMA_DELTA_DIST_MAX }, { NULL, NULL, 0, 0 } }; lzma_options_delta *options = xmalloc(sizeof(lzma_options_subblock)); *options = (lzma_options_delta){ // It's hard to give a useful default for this. - .distance = LZMA_DELTA_DISTANCE_MIN, + .type = LZMA_DELTA_TYPE_BYTE, + .dist = LZMA_DELTA_DIST_MIN, }; parse_options(str, opts, &set_delta, options); @@ -248,9 +248,9 @@ enum { OPT_LP, OPT_PB, OPT_MODE, - OPT_FB, + OPT_NICE, OPT_MF, - OPT_MC + OPT_DEPTH, }; @@ -261,35 +261,35 @@ set_lzma(void *options, uint32_t key, uint64_t value) switch (key) { case OPT_DICT: - opt->dictionary_size = value; + opt->dict_size = value; break; case OPT_LC: - opt->literal_context_bits = value; + opt->lc = value; break; case OPT_LP: - opt->literal_pos_bits = value; + opt->lp = value; break; case OPT_PB: - opt->pos_bits = value; + opt->pb = value; break; case OPT_MODE: opt->mode = value; break; - case OPT_FB: - opt->fast_bytes = value; + case OPT_NICE: + opt->nice_len = value; break; case OPT_MF: - opt->match_finder = value; + opt->mf = value; break; - case OPT_MC: - opt->match_finder_cycles = value; + case OPT_DEPTH: + opt->depth = value; break; } } @@ -314,35 +314,49 @@ parse_options_lzma(const char *str) }; static const option_map opts[] = { - { "dict", NULL, LZMA_DICTIONARY_SIZE_MIN, - LZMA_DICTIONARY_SIZE_MAX }, - { "lc", NULL, LZMA_LITERAL_CONTEXT_BITS_MIN, - LZMA_LITERAL_CONTEXT_BITS_MAX }, - { "lp", NULL, LZMA_LITERAL_POS_BITS_MIN, - LZMA_LITERAL_POS_BITS_MAX }, - { "pb", NULL, LZMA_POS_BITS_MIN, LZMA_POS_BITS_MAX }, - { "mode", modes, 0, 0 }, - { "fb", NULL, LZMA_FAST_BYTES_MIN, LZMA_FAST_BYTES_MAX }, - { "mf", mfs, 0, 0 }, - { "mc", NULL, 0, UINT32_MAX }, - { NULL, NULL, 0, 0 } + { "dict", NULL, LZMA_DICT_SIZE_MIN, + (UINT32_C(1) << 30) + (UINT32_C(1) << 29) }, + { "lc", NULL, LZMA_LCLP_MIN, LZMA_LCLP_MAX }, + { "lp", NULL, LZMA_LCLP_MIN, LZMA_LCLP_MAX }, + { "pb", NULL, LZMA_PB_MIN, LZMA_PB_MAX }, + { "mode", modes, 0, 0 }, + { "nice", NULL, 2, 273 }, + { "mf", mfs, 0, 0 }, + { "depth", NULL, 0, UINT32_MAX }, + { NULL, NULL, 0, 0 } }; + // TODO There should be a way to take some preset as the base for + // custom settings. lzma_options_lzma *options = xmalloc(sizeof(lzma_options_lzma)); *options = (lzma_options_lzma){ - .dictionary_size = LZMA_DICTIONARY_SIZE_DEFAULT, - .literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT, - .literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT, - .pos_bits = LZMA_POS_BITS_DEFAULT, - .preset_dictionary = NULL, + .dict_size = LZMA_DICT_SIZE_DEFAULT, + .preset_dict = NULL, + .preset_dict_size = 0, + .lc = LZMA_LC_DEFAULT, + .lp = LZMA_LP_DEFAULT, + .pb = LZMA_PB_DEFAULT, .persistent = false, .mode = LZMA_MODE_NORMAL, - .fast_bytes = LZMA_FAST_BYTES_DEFAULT, - .match_finder = LZMA_MF_BT4, - .match_finder_cycles = 0, + .nice_len = 64, + .mf = LZMA_MF_BT4, + .depth = 0, }; parse_options(str, opts, &set_lzma, options); + if (options->lc + options->lp > LZMA_LCLP_MAX) { + errmsg(V_ERROR, "The sum of lc and lp must be at " + "maximum of 4"); + exit(ERROR); + } + + const uint32_t nice_len_min = options->mf & 0x0F; + if (options->nice_len < nice_len_min) { + errmsg(V_ERROR, "The selected match finder requires at " + "least nice=%" PRIu32, nice_len_min); + exit(ERROR); + } + return options; } diff --git a/tests/test_block_header.c b/tests/test_block_header.c index 1d8e9d39..7f94d837 100644 --- a/tests/test_block_header.c +++ b/tests/test_block_header.c @@ -24,6 +24,8 @@ static uint8_t buf[LZMA_BLOCK_HEADER_SIZE_MAX]; static lzma_block known_options; static lzma_block decoded_options; +static lzma_options_lzma opt_lzma; + static lzma_filter filters_none[1] = { { .id = LZMA_VLI_UNKNOWN, @@ -34,7 +36,7 @@ static lzma_filter filters_none[1] = { static lzma_filter filters_one[2] = { { .id = LZMA_FILTER_LZMA2, - .options = (void *)(&lzma_preset_lzma[0]), + .options = &opt_lzma, }, { .id = LZMA_VLI_UNKNOWN, } @@ -53,7 +55,7 @@ static lzma_filter filters_four[5] = { .options = NULL, }, { .id = LZMA_FILTER_LZMA2, - .options = (void *)(&lzma_preset_lzma[0]), + .options = &opt_lzma, }, { .id = LZMA_VLI_UNKNOWN, } @@ -75,7 +77,7 @@ static lzma_filter filters_five[6] = { .options = NULL, }, { .id = LZMA_FILTER_LZMA2, - .options = (void *)(&lzma_preset_lzma[0]), + .options = &opt_lzma, }, { .id = LZMA_VLI_UNKNOWN, } @@ -230,6 +232,7 @@ int main(void) { lzma_init(); + succeed(lzma_lzma_preset(&opt_lzma, 0)); test1(); test2(); diff --git a/tests/test_compress.sh b/tests/test_compress.sh index 49f3fd50..05668191 100755 --- a/tests/test_compress.sh +++ b/tests/test_compress.sh @@ -121,8 +121,8 @@ do --armthumb \ --sparc do - test_lzma $ARGS --lzma2=dict=64KiB,fb=32,mode=fast - test_lzma --subblock $ARGS --lzma2=dict=64KiB,fb=32,mode=fast + test_lzma $ARGS --lzma2=dict=64KiB,nice=32,mode=fast + test_lzma --subblock $ARGS --lzma2=dict=64KiB,nice=32,mode=fast done echo diff --git a/tests/test_filter_flags.c b/tests/test_filter_flags.c index 585138d1..2b53a688 100644 --- a/tests/test_filter_flags.c +++ b/tests/test_filter_flags.c @@ -200,7 +200,7 @@ static void test_lzma(void) { // Test 1 - known_flags.id = LZMA_FILTER_LZMA; + known_flags.id = LZMA_FILTER_LZMA1; known_flags.options = NULL; expect(encode(99)); |