diff options
Diffstat (limited to '')
| -rw-r--r-- | Makefile.am | 4 | ||||
| -rwxr-xr-x | autogen.sh | 8 | ||||
| -rw-r--r-- | po4a/.gitignore | 2 | ||||
| -rw-r--r-- | po4a/po4a.conf | 14 | ||||
| -rwxr-xr-x | po4a/update-po | 45 | ||||
| -rw-r--r-- | src/scripts/Makefile.am | 64 | ||||
| -rw-r--r-- | src/xz/Makefile.am | 50 | ||||
| -rw-r--r-- | src/xzdec/Makefile.am | 55 |
8 files changed, 197 insertions, 45 deletions
diff --git a/Makefile.am b/Makefile.am index 16db5142..3a634991 100644 --- a/Makefile.am +++ b/Makefile.am @@ -47,6 +47,7 @@ dist_examplesold_DATA = \ endif EXTRA_DIST = \ + po4a \ extra \ dos \ windows \ @@ -99,8 +100,11 @@ dist-hook: fi # This works with GNU tar and gives cleaner package than normal 'make dist'. +# This also ensures that the man page translations are up to date (dist-hook +# would be too late for that). mydist: sh "$(srcdir)/src/liblzma/validate_map.sh" + cd "$(srcdir)/po4a" && sh update-po VERSION=$(VERSION); \ if test -d "$(srcdir)/.git" && type git > /dev/null 2>&1; then \ SNAPSHOT=`cd "$(srcdir)" && git describe --abbrev=4 | cut -b2-`; \ @@ -9,14 +9,16 @@ # ############################################################################### -# The result of using "autoreconf -fi" should be identical to using this -# script. I'm leaving this script here just in case someone finds it useful. - set -e -x +# The following six lines are almost identical to "autoreconf -fi" but faster. ${AUTOPOINT:-autopoint} -f ${LIBTOOLIZE:-libtoolize} -c -f || glibtoolize -c -f ${ACLOCAL:-aclocal} -I m4 ${AUTOCONF:-autoconf} ${AUTOHEADER:-autoheader} ${AUTOMAKE:-automake} -acf --foreign + +# Generate the translated man pages if the "po4a" tool is available. +# This is *NOT* done by "autoreconf -fi" or when "make" is run. +cd po4a && sh update-po diff --git a/po4a/.gitignore b/po4a/.gitignore new file mode 100644 index 00000000..5bcfa04b --- /dev/null +++ b/po4a/.gitignore @@ -0,0 +1,2 @@ +/man +/xz-man.pot diff --git a/po4a/po4a.conf b/po4a/po4a.conf new file mode 100644 index 00000000..41a90fc2 --- /dev/null +++ b/po4a/po4a.conf @@ -0,0 +1,14 @@ +# To add a new language, add it to po4a_langs and run "update-po" +# to get a new .po file. After translating the .po file, run +# "update-po" again to generate the translated man pages. + +[po4a_langs] +[po4a_paths] xz-man.pot $lang:$lang.po + +[type: man] ../src/xz/xz.1 $lang:man/$lang/xz.1 +[type: man] ../src/xzdec/xzdec.1 $lang:man/$lang/xzdec.1 +[type: man] ../src/lzmainfo/lzmainfo.1 $lang:man/$lang/lzmainfo.1 +[type: man] ../src/scripts/xzdiff.1 $lang:man/$lang/xzdiff.1 +[type: man] ../src/scripts/xzgrep.1 $lang:man/$lang/xzgrep.1 +[type: man] ../src/scripts/xzless.1 $lang:man/$lang/xzless.1 +[type: man] ../src/scripts/xzmore.1 $lang:man/$lang/xzmore.1 diff --git a/po4a/update-po b/po4a/update-po new file mode 100755 index 00000000..c07af928 --- /dev/null +++ b/po4a/update-po @@ -0,0 +1,45 @@ +#!/bin/sh +# +############################################################################# +# +# Updates xz-man.pot and the *.po files, and generates translated man pages. +# These are done using the program po4a. If po4a is missing, it is still +# possible to build the package without translated man pages. +# +############################################################################# +# +# Author: Lasse Collin +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# +############################################################################# + +if type po4a > /dev/null 2>&1; then + : +else + echo "po4a/update-po: The program 'po4a' was not found." >&2 + echo "po4a/update-po: Translated man pages were not generated." >&2 + exit 1 +fi + +if test ! -f po4a.conf; then + cd `dirname "$0"` || exit 1 + if test ! -f po4a.conf; then + echo "update-po: Error: Cannot find po4a.conf." >&2 + exit 1 + fi +fi + +PACKAGE_VERSION=`cd .. && sh build-aux/version.sh` || exit 1 + +# Using --force to get up-to-date version numbers in the output files +# when nothing else has changed. This makes it slower but it's fine +# as long as this isn't run every time when "make" is run at the +# top level directory. (po4a isn't super-fast even without --force). +set -x +po4a --force --verbose \ + --package-name="XZ Utils" \ + --package-version="$PACKAGE_VERSION" \ + --copyright-holder="This file is put in the public domain." \ + po4a.conf diff --git a/src/scripts/Makefile.am b/src/scripts/Makefile.am index 29bdbcd7..fe5742d0 100644 --- a/src/scripts/Makefile.am +++ b/src/scripts/Makefile.am @@ -25,31 +25,65 @@ links += \ endif install-exec-hook: - cd $(DESTDIR)$(bindir) && \ + cd "$(DESTDIR)$(bindir)" && \ for pair in $(links); do \ target=`echo $$pair | sed 's/-.*$$//' | sed '$(transform)'` && \ link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ - rm -f $$link && \ - $(LN_S) $$target $$link; \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ done +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. install-data-hook: - cd $(DESTDIR)$(mandir)/man1 && \ - for pair in $(links); do \ - target=`echo $$pair | sed 's/-.*$$//' | sed '$(transform)'` && \ - link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ - rm -f $$link.1 && \ - $(LN_S) $$target.1 $$link.1; \ + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in $$languages; do \ + mans= ; \ + for man in $(dist_man_MANS); do \ + man="$(top_srcdir)/po4a/man/$$lang/$$man" ; \ + if test -f "$$man"; then \ + mans="$$mans $$man"; \ + fi; \ + done; \ + $(MAKE) dist_man_MANS="$$mans" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + done; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1" \ + ); fi; \ + done; \ done uninstall-hook: - cd $(DESTDIR)$(bindir) && \ + cd "$(DESTDIR)$(bindir)" && \ for pair in $(links); do \ link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ - rm -f $$link; \ + rm -f "$$link"; \ done - cd $(DESTDIR)$(mandir)/man1 && \ - for pair in $(links); do \ - link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ - rm -f $$link.1; \ + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$target.1" \ + "$(DESTDIR)$(mandir)/$$lang/man1/$$link.1"; \ + done; \ done diff --git a/src/xz/Makefile.am b/src/xz/Makefile.am index 0890aad7..4bc64f36 100644 --- a/src/xz/Makefile.am +++ b/src/xz/Makefile.am @@ -81,31 +81,53 @@ xzlinks += lzma unlzma lzcat endif install-exec-hook: - cd $(DESTDIR)$(bindir) && \ + cd "$(DESTDIR)$(bindir)" && \ target=`echo xz | sed '$(transform)'`$(EXEEXT) && \ for name in $(xzlinks); do \ link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ - rm -f $$link && \ - $(LN_S) $$target $$link; \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ done +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. install-data-hook: - cd $(DESTDIR)$(mandir)/man1 && \ + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ target=`echo xz | sed '$(transform)'` && \ - for name in $(xzlinks); do \ - link=`echo $$name | sed '$(transform)'` && \ - rm -f $$link.1 && \ - $(LN_S) $$target.1 $$link.1; \ + for lang in . $$languages; do \ + man="$(top_srcdir)/po4a/man/$$lang/xz.1" ; \ + if test -f "$$man"; then \ + $(MAKE) dist_man_MANS="$$man" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + fi; \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'` && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1"; \ + done \ + ); fi; \ done uninstall-hook: - cd $(DESTDIR)$(bindir) && \ + cd "$(DESTDIR)$(bindir)" && \ for name in $(xzlinks); do \ link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ - rm -f $$link; \ + rm -f "$$link"; \ done - cd $(DESTDIR)$(mandir)/man1 && \ - for name in $(xzlinks); do \ - link=`echo $$name | sed '$(transform)'` && \ - rm -f $$link.1; \ + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for name in xz $(xzlinks); do \ + name=`echo $$name | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ + done; \ done diff --git a/src/xzdec/Makefile.am b/src/xzdec/Makefile.am index 5ff8e373..90f1e922 100644 --- a/src/xzdec/Makefile.am +++ b/src/xzdec/Makefile.am @@ -50,6 +50,7 @@ lzmadec_LDADD = $(xzdec_LDADD) bin_PROGRAMS = +lzmadecmanlink = if COND_XZDEC bin_PROGRAMS += xzdec @@ -60,23 +61,51 @@ if COND_LZMADEC bin_PROGRAMS += lzmadec # Create the symlink lzmadec.1->xzdec.1 only if xzdec.1 was installed. -# This is better than creating a dangling symlink, especially -# because creating the link may fail due to the directory being missing. -# -# FIXME: The correct solution would be to install xzdec.1 as lzmadec.1 -# but I don't know what is the sane way to do it and since this is a bit -# unusual situation anyway, it's not that important. +# This is better than creating a dangling symlink. The correct solution +# would be to install xzdec.1 as lzmadec.1 but this code is already too +# complicated so I won't do it. Installing only lzmadec is a bit unusual +# situation anyway so it's not that important. if COND_XZDEC +lzmadecmanlink += lzmadec +endif +endif + +if COND_XZDEC +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. install-data-hook: - cd $(DESTDIR)$(mandir)/man1 && \ + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ target=`echo xzdec | sed '$(transform)'` && \ link=`echo lzmadec | sed '$(transform)'` && \ - rm -f $$link.1 && \ - $(LN_S) $$target.1 $$link.1 + for lang in . $$languages; do \ + man="$(top_srcdir)/po4a/man/$$lang/xzdec.1" ; \ + if test -f "$$man"; then \ + $(MAKE) dist_man_MANS="$$man" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + fi; \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then \ + if test -n "$(lzmadecmanlink)"; then ( \ + cd "$$man1dir" && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1" \ + ); fi; \ + fi; \ + done uninstall-hook: - cd $(DESTDIR)$(mandir)/man1 && \ - link=`echo lzmadec | sed '$(transform)'` && \ - rm -f $$link.1 -endif + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for name in xzdec $(lzmadecmanlink); do \ + name=`echo $$name | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ + done; \ + done endif |