liblzma: Fix possibility of incorrect LZMA_BUF_ERROR.

lzma_code() could incorrectly return LZMA_BUF_ERROR if
all of the following was true:

  - The caller knows how many bytes of output to expect
    and only provides that much output space.

  - When the last output bytes are decoded, the
    caller-provided input buffer ends right before
    the LZMA2 end of payload marker. So LZMA2 won't
    provide more output anymore, but it won't know it
    yet and thus won't return LZMA_STREAM_END yet.

  - A BCJ filter is in use and it hasn't left any
    unfiltered bytes in the temp buffer. This can happen
    with any BCJ filter, but in practice it's more likely
    with filters other than the x86 BCJ.

Another situation where the bug can be triggered happens
if the uncompressed size is zero bytes and no output space
is provided. In this case the decompression can fail even
if the whole input file is given to lzma_code().

A similar bug was fixed in XZ Embedded on 2011-09-19.

1 files changed, 112 insertions, 0 deletions

diff --git a/tests/test_bcj_exact_size.c b/tests/test_bcj_exact_size.c
new file mode 100644
index 00000000..cbd93405
--- /dev/null
+++ b/tests/test_bcj_exact_size.c
@@ -0,0 +1,112 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       test_bcj_exact_size.c
+/// \brief      Tests BCJ decoding when the output size is known
+///
+/// These tests fail with XZ Utils 5.0.3 and earlier.
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "tests.h"
+
+
+/// Something to be compressed
+static const uint8_t in[16] = "0123456789ABCDEF";
+
+/// in[] after compression
+static uint8_t compressed[1024];
+static size_t compressed_size = 0;
+
+/// Output buffer for decompressing compressed[]
+static uint8_t out[sizeof(in)];
+
+
+static void
+compress(void)
+{
+	// Compress with PowerPC BCJ and LZMA2. PowerPC BCJ is used because
+	// it has fixed 4-byte alignment which makes triggering the potential
+	// bug easy.
+	lzma_options_lzma opt_lzma2;
+	succeed(lzma_lzma_preset(&opt_lzma2, 0));
+
+	lzma_filter filters[3] = {
+		{ .id = LZMA_FILTER_POWERPC, .options = NULL },
+		{ .id = LZMA_FILTER_LZMA2, .options = &opt_lzma2 },
+		{ .id = LZMA_VLI_UNKNOWN, .options = NULL },
+	};
+
+	expect(lzma_stream_buffer_encode(filters, LZMA_CHECK_CRC32, NULL,
+			in, sizeof(in),
+			compressed, &compressed_size, sizeof(compressed))
+			== LZMA_OK);
+}
+
+
+static void
+decompress(void)
+{
+	lzma_stream strm = LZMA_STREAM_INIT;
+	expect(lzma_stream_decoder(&strm, 10 << 20, 0) == LZMA_OK);
+
+	strm.next_in = compressed;
+	strm.next_out = out;
+
+	while (true) {
+		if (strm.total_in < compressed_size)
+			strm.avail_in = 1;
+
+		const lzma_ret ret = lzma_code(&strm, LZMA_RUN);
+		if (ret == LZMA_STREAM_END) {
+			expect(strm.total_in == compressed_size);
+			expect(strm.total_out == sizeof(in));
+			return;
+		}
+
+		expect(ret == LZMA_OK);
+
+		if (strm.total_out < sizeof(in))
+			strm.avail_out = 1;
+	}
+}
+
+
+static void
+decompress_empty(void)
+{
+	// An empty file with one Block using PowerPC BCJ and LZMA2.
+	static const uint8_t empty_bcj_lzma2[] = {
+		0xFD, 0x37, 0x7A, 0x58, 0x5A, 0x00, 0x00, 0x01,
+		0x69, 0x22, 0xDE, 0x36, 0x02, 0x01, 0x05, 0x00,
+		0x21, 0x01, 0x00, 0x00, 0x7F, 0xE0, 0xF1, 0xC8,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x01, 0x11, 0x00, 0x3B, 0x96, 0x5F, 0x73,
+		0x90, 0x42, 0x99, 0x0D, 0x01, 0x00, 0x00, 0x00,
+		0x00, 0x01, 0x59, 0x5A
+	};
+
+	// Decompress without giving any output space.
+	uint64_t memlimit = 1 << 20;
+	size_t in_pos = 0;
+	size_t out_pos = 0;
+	expect(lzma_stream_buffer_decode(&memlimit, 0, NULL,
+			empty_bcj_lzma2, &in_pos, sizeof(empty_bcj_lzma2),
+			out, &out_pos, 0) == LZMA_OK);
+	expect(in_pos == sizeof(empty_bcj_lzma2));
+	expect(out_pos == 0);
+}
+
+
+extern int
+main(void)
+{
+	compress();
+	decompress();
+	decompress_empty();
+	return 0;
+}