aboutsummaryrefslogtreecommitdiff
path: root/src/liblzma/simple/riscv.c
diff options
context:
space:
mode:
authorJia Tan <jiat0218@gmail.com>2024-01-22 23:33:39 +0800
committerJia Tan <jiat0218@gmail.com>2024-01-23 23:05:41 +0800
commit440a2eccb082dc13400c09e22308a58fef85146c (patch)
tree9fad0290823c312e34e85911cf4f8677325480db /src/liblzma/simple/riscv.c
parentDocs: Update .xz file format specification to 1.2.0. (diff)
downloadxz-440a2eccb082dc13400c09e22308a58fef85146c.tar.xz
liblzma: Add RISC-V BCJ filter.
The new Filter ID is 0x0B. Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter, the xz CLI updates, and the Autotools build system modifications. Thanks to Igor Pavlov for his many contributions to the design of the filter.
Diffstat (limited to '')
-rw-r--r--src/liblzma/simple/riscv.c688
1 files changed, 688 insertions, 0 deletions
diff --git a/src/liblzma/simple/riscv.c b/src/liblzma/simple/riscv.c
new file mode 100644
index 00000000..ea4af9c2
--- /dev/null
+++ b/src/liblzma/simple/riscv.c
@@ -0,0 +1,688 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file riscv.c
+/// \brief Filter for 32-bit/64-bit little/big endian RISC-V binaries
+///
+/// This converts program counter relative addresses in function calls
+/// (JAL, AUIPC+JALR), address calculation of functions and global
+/// variables (AUIPC+ADDI), loads (AUIPC+load), and stores (AUIPC+store).
+///
+/// For AUIPC+inst2 pairs, the paired instruction checking is fairly relaxed.
+/// The paired instruction opcode must only have its lowest two bits set,
+/// meaning it will convert any paired instruction that is not a 16-bit
+/// compressed instruction. This was shown to be enough to keep the number
+/// of false matches low while improving code size and speed.
+//
+// Authors: Lasse Collin
+// Jia Tan
+//
+// This file has been put into the public domain.
+// You can do whatever you want with this file.
+//
+// Special thanks:
+//
+// - Chien Wong <m@xv97.com> provided a few early versions of RISC-V
+// filter variants along with test files and benchmark results.
+//
+// - Igor Pavlov helped a lot in the filter design, getting it both
+// faster and smaller. The implementation here is still independently
+// written, not based on LZMA SDK.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+/*
+
+RISC-V filtering
+================
+
+ RV32I and RV64I, possibly combined with extensions C, Zfh, F, D,
+ and Q, are identical enough that the same filter works for both.
+
+ The instruction encoding is always little endian, even on systems
+ with big endian data access. Thus the same filter works for both
+ endiannesses.
+
+ The following instructions have program counter relative
+ (pc-relative) behavior:
+
+JAL
+---
+
+ JAL is used for function calls (including tail calls) and
+ unconditional jumps within functions. Jumps within functions
+ aren't useful to filter because the absolute addresses often
+ appear only once or at most a few times. Tail calls and jumps
+ within functions look the same to a simple filter so neither
+ are filtered, that is, JAL x0 is ignored (the ABI name of the
+ register x0 is "zero").
+
+ Almost all calls store the return address to register x1 (ra)
+ or x5 (t0). To reduce false matches when the filter is applied
+ to non-code data, only the JAL instructions that use x1 or x5
+ are converted. JAL has pc-relative range of +/-1 MiB so longer
+ calls and jumps need another method (AUIPC+JALR).
+
+C.J and C.JAL
+-------------
+
+ C.J and C.JAL have pc-relative range of +/-2 KiB.
+
+ C.J is for tail calls and jumps within functions and isn't
+ filtered for the reasons mentioned for JAL x0.
+
+ C.JAL is an RV32C-only instruction. Its encoding overlaps with
+ RV64C-only C.ADDIW which is a common instruction. So if filtering
+ C.JAL was useful (it wasn't tested) then a separate filter would
+ be needed for RV32 and RV64. Also, false positives would be a
+ significant problem when the filter is applied to non-code data
+ because C.JAL needs only five bits to match. Thus, this filter
+ doesn't modify C.JAL instructions.
+
+BEQ, BNE, BLT, BGE, BLTU, BGEU, C.BEQZ, and C.BNEZ
+--------------------------------------------------
+
+ These are conditional branches with pc-relative range
+ of +/-4 KiB (+/-256 B for C.*). The absolute addresses often
+ appear only once and very short distances are the most common,
+ so filtering these instructions would make compression worse.
+
+AUIPC with rd != x0
+-------------------
+
+ AUIPC is paired with a second instruction (inst2) to do
+ pc-relative jumps, calls, loads, stores, and for taking
+ an address of a symbol. AUIPC has a 20-bit immediate and
+ the possible inst2 choices have a 12-bit immediate.
+
+ AUIPC stores pc + 20-bit signed immediate to a register.
+ The immediate encodes a multiple of 4 KiB so AUIPC itself
+ has a pc-relative range of +/-2 GiB. AUIPC does *NOT* set
+ the lowest 12 bits of the result to zero! This means that
+ the 12-bit immediate in inst2 cannot just include the lowest
+ 12 bits of the absolute address as is; the immediate has to
+ compensate for the lowest 12 bits that AUIPC copies from the
+ program counter. This means that a good filter has to convert
+ not only AUIPC but also the paired inst2.
+
+ A strict filter would focus on filtering the following
+ AUIPC+inst2 pairs:
+
+ - AUIPC+JALR: Function calls, including tail calls.
+
+ - AUIPC+ADDI: Calculating the address of a function
+ or a global variable.
+
+ - AUIPC+load/store from the base instruction sets
+ (RV32I, RV64I) or from the floating point extensions
+ Zfh, F, D, and Q:
+ * RV32I: LB, LH, LW, LBU, LHU, SB, SH, SW
+ * RV64I has also: LD, LWU, SD
+ * Zhf: FLH, FSH
+ * F: FLW, FSW
+ * D: FLD, FSD
+ * Q: FLQ, FSQ
+
+ NOTE: AUIPC+inst2 can only be a pair if AUIPC's rd specifies
+ the same register as inst2's rs1.
+
+ Instead of strictly accepting only the above instructions as inst2,
+ this filter uses a much simpler condition: the lowest two bits of
+ inst2 must be set, that is, inst2 must not be a 16-bit compressed
+ instruction. So this will accept all 32-bit and possible future
+ extended instructions as a pair to AUIPC if the bits in AUIPC's
+ rd [11:7] match the bits [19:15] in inst2 (the bits that I-type and
+ S-type instructions use for rs1). Testing showed that this relaxed
+ condition for inst2 did not consistently or significantly affect
+ compression ratio but it reduced code size and improved speed.
+
+ Additionally, the paired instruction is always treated as an I-type
+ instruction. The S-type instructions used by stores (SB, SH, SW,
+ etc.) place the lowest 5 bits of the immediate in a different
+ location than I-type instructions. AUIPC+store pairs are less
+ common than other pairs, and testing showed that the extra
+ code required to handle S-type instructions was not worth the
+ compression ratio gained.
+
+ AUIPC+inst2 don't necessarily appear sequentially next to each
+ other although very often they do. Especially AUIPC+JALR are
+ sequential as that may allow instruction fusion in processors
+ (and perhaps help branch prediction as a fused AUIPC+JALR is
+ a direct branch while JALR alone is an indirect branch).
+
+ Clang 16 can generate code where AUIPC+inst2 is split:
+
+ - AUIPC is outside a loop and inst2 (load/store) is inside
+ the loop. This way the AUIPC instruction needs to be
+ executed only once.
+
+ - Load-modify-store may have AUIPC for the load and the same
+ AUIPC-result is used for the store too. This may get combined
+ with AUIPC being outside the loop.
+
+ - AUIPC is before a conditional branch and inst2 is hundreds
+ of bytes away at the branch target.
+
+ - Inner and outer pair:
+
+ auipc a1,0x2f
+ auipc a2,0x3d
+ ld a2,-500(a2)
+ addi a1,a1,-233
+
+ - Many split pairs with an untaken conditional branch between:
+
+ auipc s9,0x1613 # Pair 1
+ auipc s4,0x1613 # Pair 2
+ auipc s6,0x1613 # Pair 3
+ auipc s10,0x1613 # Pair 4
+ beqz a5,a3baae
+ ld a0,0(a6)
+ ld a6,246(s9) # Pair 1
+ ld a1,250(s4) # Pair 2
+ ld a3,254(s6) # Pair 3
+ ld a4,258(s10) # Pair 4
+
+ It's not possible to find all split pairs in a filter like this.
+ At least in 2024, simple sequential pairs are 99 % of AUIPC uses
+ so filtering only such pairs gives good results and makes the
+ filter simpler. However, it's possible that future compilers will
+ produce different code where sequential pairs aren't as common.
+
+ This filter doesn't convert AUIPC instructions alone because:
+
+ (1) The conversion would be off-by-one (or off-by-4096) half the
+ time because the lowest 12 bits from inst2 (inst2_imm12)
+ aren't known. We only know that the absolute address is
+ pc + AUIPC_imm20 + [-2048, +2047] but there is no way to
+ know the exact 4096-byte multiple (or 4096 * n + 2048):
+ there are always two possibilities because AUIPC copies
+ the 12 lowest bits from pc instead of zeroing them.
+
+ NOTE: The sign-extension of inst2_imm12 adds a tiny bit
+ of extra complexity to AUIPC math in general but it's not
+ the reason for this problem. The sign-extension only changes
+ the relative position of the pc-relative 4096-byte window.
+
+ (2) Matching AUIPC instruction alone requires only seven bits.
+ When the filter is applied to non-code data, that leads
+ to many false positives which make compression worse.
+ As long as most AUIPC+inst2 pairs appear as two consecutive
+ instructions, converting only such pairs gives better results.
+
+ In assembly, AUIPC+inst2 tend to look like this:
+
+ # Call:
+ auipc ra, 0x12345
+ jalr ra, -42(ra)
+
+ # Tail call:
+ auipc t1, 0x12345
+ jalr zero, -42(t1)
+
+ # Getting the absolute address:
+ auipc a0, 0x12345
+ addi a0, a0, -42
+
+ # rd of inst2 isn't necessarily the same as rs1 even
+ # in cases where there is no reason to preserve rs1.
+ auipc a0, 0x12345
+ addi a1, a0, -42
+
+ As of 2024, 16-bit instructions from the C extension don't
+ appear as inst2. The RISC-V psABI doesn't list AUIPC+C.* as
+ a linker relaxation type explicitly but it's not disallowed
+ either. Usefulness is limited as most of the time the lowest
+ 12 bits won't fit in a C instruction. This filter doesn't
+ support AUIPC+C.* combinations because this makes the filter
+ simpler, there are no test files, and it hopefully will never
+ be needed anyway.
+
+ (Compare AUIPC to ARM64 where ADRP does set the lowest 12 bits
+ to zero. The paired instruction has the lowest 12 bits of the
+ absolute address as is in a zero-extended immediate. Thus the
+ ARM64 filter doesn't need to care about the instructions that
+ are paired with ADRP. An off-by-4096 issue can still occur if
+ the code section isn't aligned with the filter's start offset.
+ It's not a problem with standalone ELF files but Windows PE
+ files need start_offset=3072 for best results. Also, a .tar
+ stores files with 512-byte alignment so most of the time it
+ won't be the best for ARM64.)
+
+AUIPC with rd == x0
+-------------------
+
+ AUIPC instructions with rd=x0 are reserved for HINTs in the base
+ instruction set. Such AUIPC instructions are never filtered.
+
+ As of January 2024, it seems likely that AUIPC with rd=x0 will
+ be used for landing pads (pseudoinstruction LPAD). LPAD is used
+ to mark valid targets for indirect jumps (for JALR), for example,
+ beginnings of functions. The 20-bit immediate in LPAD instruction
+ is a label, not a pc-relative address. Thus it would be
+ counterproductive to convert AUIPC instructions with rd=x0.
+
+ Often the next instruction after LPAD won't have rs1=x0 and thus
+ the filtering would be skipped for that reason alone. However,
+ it's not good to rely on this. For example, consider a function
+ that begins like this:
+
+ int foo(int i)
+ {
+ if (i <= 234) {
+ ...
+ }
+
+ A compiler may generate something like this:
+
+ lpad 0x54321
+ li a5, 234
+ bgt a0, a5, .L2
+
+ Converting the pseudoinstructions to raw instructions:
+
+ auipc x0, 0x54321
+ addi x15, x0, 234
+ blt x15, x10, .L2
+
+ In this case the filter would undesirably convert the AUIPC+ADDI
+ pair if the filter didn't explicitly skip AUIPC instructions
+ that have rd=x0.
+
+*/
+
+
+#include "simple_private.h"
+
+
+// This checks two conditions at once:
+// - AUIPC rd == inst2 rs1.
+// - inst2 opcode has the lowest two bits set.
+//
+// The 8 bit left shift aligns the rd of AUIPC with the rs1 of inst2.
+// By XORing the registers, any non-zero value in those bits indicates the
+// registers are not equal and thus not an AUIPC pair. Subtracting 3 from
+// inst2 will zero out the first two opcode bits only when they are set.
+// The mask tests if any of the register or opcode bits are set (and thus
+// not an AUIPC pair).
+//
+// Alternative expression: (((((auipc) << 8) ^ (inst2)) & 0xF8003) != 3)
+#define NOT_AUIPC_PAIR(auipc, inst2) \
+ ((((auipc) << 8) ^ ((inst2) - 3)) & 0xF8003)
+
+// This macro checks multiple conditions:
+// (1) AUIPC rd [11:7] == x2 (special rd value).
+// (2) AUIPC bits 12 and 13 set (the lowest two opcode bits of packed inst2).
+// (3) inst2_rs1 doesn't equal x0 or x2 because the opposite
+// conversion is only done when
+// auipc_rd != x0 &&
+// auipc_rd != x2 &&
+// auipc_rd == inst2_rs1.
+//
+// The left-hand side takes care of (1) and (2).
+// (a) The lowest 7 bits are already known to be AUIPC so subtracting 0x17
+// makes those bits zeros.
+// (b) If AUIPC rd equals x2, subtracting 0x10 makes bits [11:7] zeros.
+// If rd doesn't equal x2, then there will be at least one non-zero bit
+// and the next step (c) is irrelevant.
+// (c) If the lowest two opcode bits of the packed inst2 are set in [13:12],
+// then subtracting 0x300 will make those bits zeros. Otherwise there
+// will be at least one non-zero bit.
+//
+// The shift by 18 removes the high bits from the final '>=' comparison and
+// ensures that any non-zero result will be larger than any possible result
+// from the right-hand side of the comparison. The cast ensures that the
+// left-hand side didn't get promoted to a larger type than uint32_t.
+//
+// On the right-hand side, inst2_rs1 & 0x1D will be non-zero as long as
+// inst2_rs1 is not x0 or x2.
+//
+// The final '>=' comparison will make the expression true if:
+// - The subtraction caused any bits to be set (special AUIPC rd value not
+// used or inst2 opcode bits not set). (non-zero >= non-zero or 0)
+// - The subtraction did not cause any bits to be set but inst2_rs1 was
+// x0 or x2. (0 >= 0)
+#define NOT_SPECIAL_AUIPC(auipc, inst2_rs1) \
+ ((uint32_t)(((auipc) - 0x3117) << 18) >= ((inst2_rs1) & 0x1D))
+
+
+// The encode and decode functions are split for this filter because of the
+// AUIPC+inst2 filtering. This filter design allows a decoder-only
+// implementation to be smaller than alternative designs.
+
+#ifdef HAVE_ENCODER_RISCV
+static size_t
+riscv_encode(void *simple lzma_attribute((__unused__)),
+ uint32_t now_pos,
+ bool is_encoder lzma_attribute((__unused__)),
+ uint8_t *buffer, size_t size)
+{
+ // Avoid using i + 8 <= size in the loop condition.
+ //
+ // NOTE: If there is a JAL in the last six bytes of the stream, it
+ // won't be converted. This is intentional to keep the code simpler.
+ if (size < 8)
+ return 0;
+
+ size -= 8;
+
+ size_t i;
+
+ // The loop is advanced by 2 bytes every iteration since the
+ // instruction stream may include 16-bit instructions (C extension).
+ for (i = 0; i <= size; i += 2) {
+ uint32_t inst = read32le(buffer + i);
+
+ if ((inst & 0xDFF) == 0x0EF) {
+ // JAL with rd=x1(ra) or rd=x5(t0)
+ //
+ // The 20-bit immediate is in four pieces.
+ // The encoder stores it in big endian form
+ // since it improves compression slightly.
+ uint32_t addr
+ = ((inst & 0x80000000) >> 11)
+ | ((inst & 0x7FE00000) >> 20)
+ | ((inst & 0x00100000) >> 9)
+ | (inst & 0x000FF000);
+
+ addr += now_pos + (uint32_t)i;
+
+ inst = (inst & 0xFFF)
+ | ((addr & 0x1E0000) >> 5)
+ | ((addr & 0x01FE00) << 7)
+ | ((addr & 0x0001FE) << 23);
+
+ write32le(buffer + i, inst);
+
+ // The "-2" is included because the for-loop will
+ // always increment by 2. In this case, we want to
+ // skip an extra 2 bytes since we used 4 bytes
+ // of input.
+ i += 4 - 2;
+
+ } else if ((inst & 0x7F) == 0x17) {
+ // AUIPC
+ //
+ // Branch based on AUIPC's rd. The bitmask test does
+ // the same thing as this:
+ //
+ // const uint32_t auipc_rd = (inst >> 7) & 0x1F;
+ // if (auipc_rd != 0 && auipc_rd != 2) {
+ if (inst & 0xE80) {
+ // AUIPC's rd doesn't equal x0 or x2.
+
+ // Check if AUIPC+inst2 are a pair.
+ uint32_t inst2 = read32le(buffer + i + 4);
+
+ if (NOT_AUIPC_PAIR(inst, inst2)) {
+ // The NOT_AUIPC_PAIR macro allows
+ // a false AUIPC+AUIPC pair if the
+ // bits [19:15] (where rs1 would be)
+ // in the second AUIPC match the rd
+ // of the first AUIPC.
+ //
+ // We must skip enough forward so
+ // that the first two bytes of the
+ // second AUIPC cannot get converted.
+ // Such a conversion could make the
+ // current pair become a valid pair
+ // which would desync the decoder.
+ //
+ // Skipping six bytes is enough even
+ // though the above condition looks
+ // at the lowest four bits of the
+ // buffer[i + 6] too. This is safe
+ // because this filter never changes
+ // those bits if a conversion at
+ // that position is done.
+ i += 6 - 2;
+ continue;
+ }
+
+ // Convert AUIPC+inst2 to a special format:
+ //
+ // - The lowest 7 bits [6:0] retain the
+ // AUIPC opcode.
+ //
+ // - The rd [11:7] is set to x2(sp). x2 is
+ // used as the stack pointer so AUIPC with
+ // rd=x2 should be very rare in real-world
+ // executables.
+ //
+ // - The remaining 20 bits [31:12] (that
+ // normally hold the pc-relative immediate)
+ // are used to store the lowest 20 bits of
+ // inst2. That is, the 12-bit immediate of
+ // inst2 is not included.
+ //
+ // - The location of the original inst2 is
+ // used to store the 32-bit absolute
+ // address in big endian format. Compared
+ // to the 20+12-bit split encoding, this
+ // results in a longer uninterrupted
+ // sequence of identical common bytes
+ // when the same address is referred
+ // with different instruction pairs
+ // (like AUIPC+LD vs. AUIPC+ADDI) or
+ // when the occurrences of the same
+ // pair use different registers. When
+ // referring to adjacent memory locations
+ // (like function calls that go via the
+ // ELF PLT), in big endian order only the
+ // last 1-2 bytes differ; in little endian
+ // the differing 1-2 bytes would be in the
+ // middle of the 8-byte sequence.
+ //
+ // When reversing the transformation, the
+ // original rd of AUIPC can be restored
+ // from inst2's rs1 as they are required to
+ // be the same.
+
+ // Arithmetic right shift makes sign extension
+ // trivial but C doesn't guarantee it for
+ // signed integers so a fallback is provided
+ // for portability.
+ uint32_t addr = inst & 0xFFFFF000;
+ if ((-1 >> 1) == -1)
+ addr += (uint32_t)(
+ (int32_t)inst2 >> 20);
+ else
+ addr += (inst2 >> 20)
+ - ((inst2 >> 19) & 0x1000);
+
+ addr += now_pos + (uint32_t)i;
+
+ // Construct the first 32 bits:
+ // [6:0] AUIPC opcode
+ // [11:7] Special AUIPC rd = x2
+ // [31:12] The lowest 20 bits of inst2
+ inst = 0x17 | (2 << 7) | (inst2 << 12);
+
+ write32le(buffer + i, inst);
+
+ // The second 32 bits store the absolute
+ // address in big endian order.
+ write32be(buffer + i + 4, addr);
+ } else {
+ // AUIPC's rd equals x0 or x2.
+ //
+ // x0 indicates a landing pad (LPAD).
+ // It's always skipped.
+ //
+ // AUIPC with rd == x2 is used for the special
+ // format as explained above. When the input
+ // contains a byte sequence that matches the
+ // special format, "fake" decoding must be
+ // done to keep the filter bijective (that
+ // is, safe to apply on arbitrary data).
+ //
+ // See the "x0 or x2" section in riscv_decode()
+ // for how the "real" decoding is done. The
+ // "fake" decoding is a simplified version
+ // of "real" decoding with the following
+ // differences (these reduce code size of
+ // the decoder):
+ // (1) The lowest 12 bits aren't sign-extended.
+ // (2) No address conversion is done.
+ // (3) Big endian format isn't used (the fake
+ // address is in little endian order).
+
+ // Check if inst matches the special format.
+ const uint32_t fake_rs1 = inst >> 27;
+
+ if (NOT_SPECIAL_AUIPC(inst, fake_rs1)) {
+ i += 4 - 2;
+ continue;
+ }
+
+ const uint32_t fake_addr =
+ read32le(buffer + i + 4);
+
+ // Construct the second 32 bits:
+ // [19:0] Upper 20 bits from AUIPC
+ // [31:20] The lowest 12 bits of fake_addr
+ const uint32_t fake_inst2 = (inst >> 12)
+ | (fake_addr << 20);
+
+ // Construct new first 32 bits from:
+ // [6:0] AUIPC opcode
+ // [11:7] Fake AUIPC rd = fake_rs1
+ // [31:12] The highest 20 bits of fake_addr
+ inst = 0x17 | (fake_rs1 << 7)
+ | (fake_addr & 0xFFFFF000);
+
+ write32le(buffer + i, inst);
+ write32le(buffer + i + 4, fake_inst2);
+ }
+
+ i += 8 - 2;
+ }
+ }
+
+ return i;
+}
+
+
+extern lzma_ret
+lzma_simple_riscv_encoder_init(lzma_next_coder *next,
+ const lzma_allocator *allocator,
+ const lzma_filter_info *filters)
+{
+ return lzma_simple_coder_init(next, allocator, filters,
+ &riscv_encode, 0, 8, 2, true);
+}
+#endif
+
+
+#ifdef HAVE_DECODER_RISCV
+static size_t
+riscv_decode(void *simple lzma_attribute((__unused__)),
+ uint32_t now_pos,
+ bool is_encoder lzma_attribute((__unused__)),
+ uint8_t *buffer, size_t size)
+{
+ if (size < 8)
+ return 0;
+
+ size -= 8;
+
+ size_t i;
+ for (i = 0; i <= size; i += 2) {
+ uint32_t inst = read32le(buffer + i);
+
+ if ((inst & 0xDFF) == 0x0EF) {
+ // JAL with rd=x1(ra) or rd=x5(t0)
+ uint32_t addr
+ = ((inst << 5) & 0x1E0000)
+ | ((inst >> 7) & 0x01FE00)
+ | ((inst >> 23) & 0x0001FE);
+
+ addr -= now_pos + (uint32_t)i;
+
+ inst = (inst & 0xFFF)
+ | ((addr << 11) & 0x80000000)
+ | ((addr << 20) & 0x7FE00000)
+ | ((addr << 9) & 0x00100000)
+ | ( addr & 0x000FF000);
+
+ write32le(buffer + i, inst);
+ i += 4 - 2;
+
+ } else if ((inst & 0x7F) == 0x17) {
+ // AUIPC
+ uint32_t inst2;
+
+ if (inst & 0xE80) {
+ // AUIPC's rd doesn't equal x0 or x2.
+
+ // Check if it is a "fake" AUIPC+inst2 pair.
+ inst2 = read32le(buffer + i + 4);
+
+ if (NOT_AUIPC_PAIR(inst, inst2)) {
+ i += 6 - 2;
+ continue;
+ }
+
+ // Decode (or more like re-encode) the "fake"
+ // pair. The "fake" format doesn't do
+ // sign-extension, address conversion, or
+ // use big endian. (The use of little endian
+ // allows sharing the write32le() calls in
+ // the decoder to reduce code size when
+ // unaligned access isn't supported.)
+ uint32_t addr = inst & 0xFFFFF000;
+ addr += inst2 >> 20;
+
+ inst = 0x17 | (2 << 7) | (inst2 << 12);
+ inst2 = addr;
+ } else {
+ // AUIPC's rd equals x0 or x2.
+
+ // Check if inst matches the special format
+ // used by the encoder.
+ const uint32_t inst2_rs1 = inst >> 27;
+
+ if (NOT_SPECIAL_AUIPC(inst, inst2_rs1)) {
+ i += 4 - 2;
+ continue;
+ }
+
+ // Decode the "real" pair.
+ uint32_t addr = read32be(buffer + i + 4);
+
+ addr -= now_pos + (uint32_t)i;
+
+ // The second instruction:
+ // - Get the lowest 20 bits from inst.
+ // - Add the lowest 12 bits of the address
+ // as the immediate field.
+ inst2 = (inst >> 12) | (addr << 20);
+
+ // AUIPC:
+ // - rd is the same as inst2_rs1.
+ // - The sign extension of the lowest 12 bits
+ // must be taken into account.
+ inst = 0x17 | (inst2_rs1 << 7)
+ | ((addr + 0x800) & 0xFFFFF000);
+ }
+
+ // Both decoder branches write in little endian order.
+ write32le(buffer + i, inst);
+ write32le(buffer + i + 4, inst2);
+
+ i += 8 - 2;
+ }
+ }
+
+ return i;
+}
+
+
+extern lzma_ret
+lzma_simple_riscv_decoder_init(lzma_next_coder *next,
+ const lzma_allocator *allocator,
+ const lzma_filter_info *filters)
+{
+ return lzma_simple_coder_init(next, allocator, filters,
+ &riscv_decode, 0, 8, 2, false);
+}
+#endif