aboutsummaryrefslogtreecommitdiff
path: root/src/liblzma/lz/lz_encoder.c
diff options
context:
space:
mode:
authorLasse Collin <lasse.collin@tukaani.org>2008-01-14 13:39:54 +0200
committerLasse Collin <lasse.collin@tukaani.org>2008-01-14 13:39:54 +0200
commite22b37968d153683fec61ad37b6b160cb7ca4ddc (patch)
treed9631e988ead9de0fcac67a9abc803a37324e3a6 /src/liblzma/lz/lz_encoder.c
parentAdded one assert() to process.c of the command line tool. (diff)
downloadxz-e22b37968d153683fec61ad37b6b160cb7ca4ddc.tar.xz
Major changes to LZ encoder, LZMA encoder, and range encoder.
These changes implement support for LZMA_SYNC_FLUSH in LZMA encoder, and move the temporary buffer needed by range encoder from lzma_range_encoder structure to lzma_lz_encoder.
Diffstat (limited to 'src/liblzma/lz/lz_encoder.c')
-rw-r--r--src/liblzma/lz/lz_encoder.c138
1 files changed, 118 insertions, 20 deletions
diff --git a/src/liblzma/lz/lz_encoder.c b/src/liblzma/lz/lz_encoder.c
index 629f9df2..8d2277ec 100644
--- a/src/liblzma/lz/lz_encoder.c
+++ b/src/liblzma/lz/lz_encoder.c
@@ -141,8 +141,9 @@ lzma_lz_encoder_reset(lzma_lz_encoder *lz, lzma_allocator *allocator,
const uint8_t *preset_dictionary,
size_t preset_dictionary_size)
{
- // Set uncompressed size.
+ lz->sequence = SEQ_RUN;
lz->uncompressed_size = uncompressed_size;
+ lz->temp_size = 0;
///////////////
// In Window //
@@ -187,7 +188,6 @@ lzma_lz_encoder_reset(lzma_lz_encoder *lz, lzma_allocator *allocator,
lz->read_pos = 0;
lz->read_limit = 0;
lz->write_pos = 0;
- lz->stream_end_was_reached = false;
//////////////////
@@ -368,35 +368,59 @@ fill_window(lzma_coder *coder, lzma_allocator *allocator, const uint8_t *in,
size_t *in_pos, size_t in_size, lzma_action action)
{
assert(coder->lz.read_pos <= coder->lz.write_pos);
- lzma_ret ret;
// Move the sliding window if needed.
if (coder->lz.read_pos >= coder->lz.size - coder->lz.keep_size_after)
move_window(&coder->lz);
+ size_t in_used;
+ lzma_ret ret;
if (coder->next.code == NULL) {
// Not using a filter, simply memcpy() as much as possible.
- bufcpy(in, in_pos, in_size, coder->lz.buffer,
+ in_used = bufcpy(in, in_pos, in_size, coder->lz.buffer,
&coder->lz.write_pos, coder->lz.size);
- if (action == LZMA_FINISH && *in_pos == in_size)
+ if (action != LZMA_RUN && *in_pos == in_size)
ret = LZMA_STREAM_END;
else
ret = LZMA_OK;
} else {
+ const size_t in_start = *in_pos;
ret = coder->next.code(coder->next.coder, allocator,
in, in_pos, in_size,
coder->lz.buffer, &coder->lz.write_pos,
coder->lz.size, action);
+ in_used = *in_pos - in_start;
}
- // If end of stream has been reached, we allow the encoder to process
- // all the input (that is, read_pos is allowed to reach write_pos).
- // Otherwise we keep keep_size_after bytes available as prebuffer.
+ assert(coder->lz.uncompressed_size >= in_used);
+ if (coder->lz.uncompressed_size != LZMA_VLI_VALUE_UNKNOWN)
+ coder->lz.uncompressed_size -= in_used;
+
+ // If end of stream has been reached or flushing completed, we allow
+ // the encoder to process all the input (that is, read_pos is allowed
+ // to reach write_pos). Otherwise we keep keep_size_after bytes
+ // available as prebuffer.
if (ret == LZMA_STREAM_END) {
- coder->lz.stream_end_was_reached = true;
+ assert(*in_pos == in_size);
coder->lz.read_limit = coder->lz.write_pos;
+ ret = LZMA_OK;
+
+ switch (action) {
+ case LZMA_SYNC_FLUSH:
+ coder->lz.sequence = SEQ_FLUSH;
+ break;
+
+ case LZMA_FINISH:
+ coder->lz.sequence = SEQ_FINISH;
+ break;
+
+ default:
+ assert(0);
+ ret = LZMA_PROG_ERROR;
+ break;
+ }
} else if (coder->lz.write_pos > coder->lz.keep_size_after) {
// This needs to be done conditionally, because if we got
@@ -406,6 +430,19 @@ fill_window(lzma_coder *coder, lzma_allocator *allocator, const uint8_t *in,
- coder->lz.keep_size_after;
}
+ // Switch to finishing mode if we have got all the input data.
+ // lzma_lz_encode() won't return LZMA_STREAM_END until LZMA_FINISH
+ // is used.
+ //
+ // NOTE: When LZMA is used together with other filters, it is possible
+ // that coder->lz.sequence gets set to SEQ_FINISH before the next
+ // encoder has returned LZMA_STREAM_END. This is somewhat ugly, but
+ // works correctly, because the next encoder cannot have any more
+ // output left to be produced. If it had, then our known Uncompressed
+ // Size would be invalid, which would mean that we have a bad bug.
+ if (ret == LZMA_OK && coder->lz.uncompressed_size == 0)
+ coder->lz.sequence = SEQ_FINISH;
+
return ret;
}
@@ -417,20 +454,81 @@ lzma_lz_encode(lzma_coder *coder, lzma_allocator *allocator,
uint8_t *restrict out, size_t *restrict out_pos,
size_t out_size, lzma_action action)
{
- while (*out_pos < out_size
- && (*in_pos < in_size || action == LZMA_FINISH)) {
- // Fill the input window if there is no more usable data.
- if (!coder->lz.stream_end_was_reached && coder->lz.read_pos
- >= coder->lz.read_limit) {
- const lzma_ret ret = fill_window(coder, allocator,
- in, in_pos, in_size, action);
- if (ret != LZMA_OK && ret != LZMA_STREAM_END)
- return ret;
+ // Flush the temporary output buffer, which may be used when the
+ // encoder runs of out of space in primary output buffer (the out,
+ // *out_pos, and out_size variables).
+ if (coder->lz.temp_size > 0) {
+ const size_t out_avail = out_size - *out_pos;
+ if (out_avail < coder->lz.temp_size) {
+ // Cannot copy everything. Copy as much as possible
+ // and move the data in lz.temp to the beginning of
+ // that buffer.
+ memcpy(out + *out_pos, coder->lz.temp, out_avail);
+ *out_pos += out_avail;
+ memmove(coder->lz.temp, coder->lz.temp + out_avail,
+ coder->lz.temp_size - out_avail);
+ coder->lz.temp_size -= out_avail;
+ return LZMA_OK;
}
+ // We can copy everything from coder->lz.temp to out.
+ memcpy(out + *out_pos, coder->lz.temp, coder->lz.temp_size);
+ *out_pos += coder->lz.temp_size;
+ coder->lz.temp_size = 0;
+ }
+
+ if (coder->lz.sequence == SEQ_FLUSH_END) {
+ // During an earlier call to this function, flushing was
+ // otherwise finished except some data was left pending
+ // in coder->lz.buffer. Now we have copied all that data
+ // to the output buffer and can return LZMA_STREAM_END.
+ coder->lz.sequence = SEQ_RUN;
+ assert(action == LZMA_SYNC_FLUSH);
+ return LZMA_STREAM_END;
+ }
+
+ if (coder->lz.sequence == SEQ_END) {
+ // This is like the above flushing case, but for finishing
+ // the encoding.
+ //
+ // NOTE: action is not necesarily LZMA_FINISH; it can
+ // be LZMA_SYNC_FLUSH too in case it is used at the
+ // end of the stream with known Uncompressed Size.
+ return action != LZMA_RUN ? LZMA_STREAM_END : LZMA_OK;
+ }
+
+ while (*out_pos < out_size
+ && (*in_pos < in_size || action != LZMA_RUN)) {
+ // Read more data to coder->lz.buffer if needed.
+ if (coder->lz.sequence == SEQ_RUN
+ && coder->lz.read_pos >= coder->lz.read_limit)
+ return_if_error(fill_window(coder, allocator,
+ in, in_pos, in_size, action));
+
// Encode
- if (coder->lz.process(coder, out, out_pos, out_size))
- return LZMA_STREAM_END;
+ if (coder->lz.process(coder, out, out_pos, out_size)) {
+ if (coder->lz.sequence == SEQ_FLUSH) {
+ assert(action == LZMA_SYNC_FLUSH);
+ if (coder->lz.temp_size == 0) {
+ // Flushing was finished successfully.
+ coder->lz.sequence = SEQ_RUN;
+ } else {
+ // Flushing was otherwise finished,
+ // except that some data was left
+ // into coder->lz.buffer.
+ coder->lz.sequence = SEQ_FLUSH_END;
+ }
+ } else {
+ // NOTE: action may be LZMA_RUN here in case
+ // Uncompressed Size is known and we have
+ // processed all the data already.
+ assert(coder->lz.sequence == SEQ_FINISH);
+ coder->lz.sequence = SEQ_END;
+ }
+
+ return action != LZMA_RUN && coder->lz.temp_size == 0
+ ? LZMA_STREAM_END : LZMA_OK;
+ }
}
return LZMA_OK;