///////////////////////////////////////////////////////////////////////////////
//
/// \file arm64.c
/// \brief Filter for ARM64 binaries
///
/// This converts ARM64 relative addresses in the BL and ADRP immediates
/// to absolute values to increase redundancy of ARM64 code.
///
/// Unlike the older BCJ filters, this handles zeros specially. This way
/// the filter won't be counterproductive on Linux kernel modules, object
/// files, and static libraries where the immediates are all zeros (to be
/// filled later by a linker). Usually this has no downsides but with bad
/// luck it can reduce the effectiveness of the filter and trying a different
/// start offset can mitigate the problem.
///
/// Converting B or ADR instructions was also tested but it's not useful.
/// A majority of the jumps for the B instruction are very small (+/- 0xFF).
/// These are typical for loops and if-statements. Encoding them to their
/// absolute address reduces redundancy since many of the small relative
/// jump values are repeated, but very few of the absolute addresses are.
//
// Authors: Lasse Collin
// Jia Tan
//
// This file has been put into the public domain.
// You can do whatever you want with this file.
//
///////////////////////////////////////////////////////////////////////////////
#include "simple_private.h"
static uint32_t
arm64_conv(uint32_t src, uint32_t pc, uint32_t mask, bool is_encoder)
{
if (!is_encoder)
pc = 0U - pc;
uint32_t dest = src + pc;
if ((dest & mask) == 0)
dest = pc;
return dest;
}
static size_t
arm64_code(void *simple lzma_attribute((__unused__)),
uint32_t now_pos, bool is_encoder,
uint8_t *buffer, size_t size)
{
size_t i;
// Clang 14.0.6 on x86-64 makes this four times bigger and 60 % slower
// with auto-vectorization that is enabled by default with -O2.
// Even -Os, which doesn't use vectorization, produces faster code.
// Disabling vectorization with -O2 gives good speed (faster than -Os)
// and reasonable code size.
//
// Such vectorization bloat happens with -O2 when targeting ARM64 too
// but performance hasn't been tested.
//
// Clang 14 and 15 won't auto-vectorize this loop if the condition
// for ADRP is replaced with the commented-out version. However,
// at least Clang 14.0.6 doesn't generate as fast code with that
// condition. The commented-out code is also bigger.
//
// GCC 12.2 on x86-64 with -O2 produces good code with both versions
// of the ADRP if-statement although the single-branch version is
// slightly faster and smaller than the commented-out version.
// Speed is similar to non-vectorized clang -O2.
#ifdef __clang__
# pragma clang loop vectorize(disable)
#endif
for (i = 0; i + 4 <= size; i += 4) {
const uint32_t pc = (uint32_t)(now_pos + i);
uint32_t instr = read32le(buffer + i);
if ((instr >> 26) == 0x25) {
// BL instruction:
// The full 26-bit immediate is converted.
// The range is +/-128 MiB.
//
// Using the full range is helps quite a lot with
// big executables. Smaller range would reduce false
// positives in non-code sections of the input though
// so this is a compromise that slightly favors big
// files. With the full range only six bits of the 32
// need to match to trigger a conversion.
const uint32_t mask26 = 0x03FFFFFF;
const uint32_t src = instr & mask26;
instr = 0x94000000;
if (src == 0)
continue;
instr |= arm64_conv(src, pc >> 2, mask26, is_encoder)
& mask26;
write32le(buffer + i, instr);
/*
// This is a more readable version of the one below but this
// has two branches. It results in bigger and slower code.
} else if ((instr & 0x9FF00000) == 0x90000000
|| (instr & 0x9FF00000) == 0x90F00000) {
*/
// This is only a rotation, addition, and testing that
// none of the bits covered by the bitmask are set.
} else if (((((instr << 8) | (instr >> 24))
+ (0x10000000 - 0x90)) & 0xE000009F) == 0) {
// ADRP instruction:
// Only values in the range +/-512 MiB are converted.
//
// Using less than the full +/-4 GiB range reduces
// false positives on non-code sections of the input
// while being excellent for executables up to 512 MiB.
// The positive effect of ADRP conversion is smaller
// than that of BL but it also doesn't hurt so much in
// non-code sections of input because, with +/-512 MiB
// range, nine bits of 32 need to match to trigger a
// conversion (two 10-bit match choices = 9 bits).
const uint32_t src = ((instr >> 29) & 3)
| ((instr >> 3) & 0x0003FFFC);
instr &= 0x9000001F;
if (src == 0)
continue;
const uint32_t dest = arm64_conv(
src, pc >> 12, 0x3FFFF, is_encoder);
instr |= (dest & 3) << 29;
instr |= (dest & 0x0003FFFC) << 3;
instr |= (0U - (dest & 0x00020000)) & 0x00E00000;
write32le(buffer + i, instr);
}
}
return i;
}
static lzma_ret
arm64_coder_init(lzma_next_coder *next, const lzma_allocator *allocator,
const lzma_filter_info *filters, bool is_encoder)
{
return lzma_simple_coder_init(next, allocator, filters,
&arm64_code, 0, 4, 4, is_encoder, true);
}
#ifdef HAVE_ENCODER_ARM64
extern lzma_ret
lzma_simple_arm64_encoder_init(lzma_next_coder *next,
const lzma_allocator *allocator,
const lzma_filter_info *filters)
{
return arm64_coder_init(next, allocator, filters, true);
}
#endif
#ifdef HAVE_DECODER_ARM64
extern lzma_ret
lzma_simple_arm64_decoder_init(lzma_next_coder *next,
const lzma_allocator *allocator,
const lzma_filter_info *filters)
{
return arm64_coder_init(next, allocator, filters, false);
}
#endif
