// SPDX-License-Identifier: 0BSD
///////////////////////////////////////////////////////////////////////////////
//
/// \file range_decoder.h
/// \brief Range Decoder
///
// Authors: Igor Pavlov
// Lasse Collin
//
///////////////////////////////////////////////////////////////////////////////
#ifndef LZMA_RANGE_DECODER_H
#define LZMA_RANGE_DECODER_H
#include "range_common.h"
typedef struct {
uint32_t range;
uint32_t code;
uint32_t init_bytes_left;
} lzma_range_decoder;
/// Reads the first five bytes to initialize the range decoder.
static inline lzma_ret
rc_read_init(lzma_range_decoder *rc, const uint8_t *restrict in,
size_t *restrict in_pos, size_t in_size)
{
while (rc->init_bytes_left > 0) {
if (*in_pos == in_size)
return LZMA_OK;
// The first byte is always 0x00. It could have been omitted
// in LZMA2 but it wasn't, so one byte is wasted in every
// LZMA2 chunk.
if (rc->init_bytes_left == 5 && in[*in_pos] != 0x00)
return LZMA_DATA_ERROR;
rc->code = (rc->code << 8) | in[*in_pos];
++*in_pos;
--rc->init_bytes_left;
}
return LZMA_STREAM_END;
}
/// Makes local copies of range decoder and *in_pos variables. Doing this
/// improves speed significantly. The range decoder macros expect also
/// variables 'in' and 'in_size' to be defined.
#define rc_to_local(range_decoder, in_pos) \
lzma_range_decoder rc = range_decoder; \
size_t rc_in_pos = (in_pos); \
uint32_t rc_bound
/// Stores the local copes back to the range decoder structure.
#define rc_from_local(range_decoder, in_pos) \
do { \
range_decoder = rc; \
in_pos = rc_in_pos; \
} while (0)
/// Resets the range decoder structure.
#define rc_reset(range_decoder) \
do { \
(range_decoder).range = UINT32_MAX; \
(range_decoder).code = 0; \
(range_decoder).init_bytes_left = 5; \
} while (0)
/// When decoding has been properly finished, rc.code is always zero unless
/// the input stream is corrupt. So checking this can catch some corrupt
/// files especially if they don't have any other integrity check.
#define rc_is_finished(range_decoder) \
((range_decoder).code == 0)
// Read the next input byte if needed.
#define rc_normalize() \
do { \
if (rc.range < RC_TOP_VALUE) { \
rc.range <<= RC_SHIFT_BITS; \
rc.code = (rc.code << RC_SHIFT_BITS) | in[rc_in_pos++]; \
} \
} while (0)
/// If more input is needed but there is
/// no more input available, "goto out" is used to jump out of the main
/// decoder loop. The "_safe" macros are used in the Resumable decoder
/// mode in order to save the sequence to continue decoding from that
/// point later.
#define rc_normalize_safe(seq) \
do { \
if (rc.range < RC_TOP_VALUE) { \
if (unlikely(rc_in_pos == in_size)) { \
coder->sequence = seq; \
goto out; \
} \
rc.range <<= RC_SHIFT_BITS; \
rc.code = (rc.code << RC_SHIFT_BITS) | in[rc_in_pos++]; \
} \
} while (0)
/// Start decoding a bit. This must be used together with rc_update_0()
/// and rc_update_1():
///
/// rc_if_0(prob) {
/// rc_update_0(prob);
/// // Do something
/// } else {
/// rc_update_1(prob);
/// // Do something else
/// }
///
#define rc_if_0(prob) \
rc_normalize(); \
rc_bound = (rc.range >> RC_BIT_MODEL_TOTAL_BITS) * (prob); \
if (rc.code < rc_bound)
#define rc_if_0_safe(prob, seq) \
rc_normalize_safe(seq); \
rc_bound = (rc.range >> RC_BIT_MODEL_TOTAL_BITS) * (prob); \
if (rc.code < rc_bound)
/// Update the range decoder state and the used probability variable to
/// match a decoded bit of 0.
#define rc_update_0(prob) \
do { \
rc.range = rc_bound; \
prob += (RC_BIT_MODEL_TOTAL - (prob)) >> RC_MOVE_BITS; \
} while (0)
/// Update the range decoder state and the used probability variable to
/// match a decoded bit of 1.
#define rc_update_1(prob) \
do { \
rc.range -= rc_bound; \
rc.code -= rc_bound; \
prob -= (prob) >> RC_MOVE_BITS; \
} while (0)
/// Decodes one bit and runs action0 or action1 depending on the decoded bit.
/// This macro is used as the last step in bittree reverse decoders since
/// those don't use "symbol" for anything else than indexing the probability
/// arrays.
#define rc_bit_last(prob, action0, action1) \
do { \
rc_if_0(prob) { \
rc_update_0(prob); \
action0; \
} else { \
rc_update_1(prob); \
action1; \
} \
} while (0)
#define rc_bit_last_safe(prob, action0, action1, seq) \
do { \
rc_if_0_safe(prob, seq) { \
rc_update_0(prob); \
action0; \
} else { \
rc_update_1(prob); \
action1; \
} \
} while (0)
/// Decodes one bit, updates "symbol", and runs action0 or action1 depending
/// on the decoded bit.
#define rc_bit(prob, action0, action1) \
rc_bit_last(prob, \
symbol <<= 1; action0, \
symbol = (symbol << 1) + 1; action1);
#define rc_bit_safe(prob, action0, action1, seq) \
rc_bit_last_safe(prob, \
symbol <<= 1; action0, \
symbol = (symbol << 1) + 1; action1, \
seq);
/// Decode a bit without using a probability.
#define rc_direct(dest) \
do { \
rc_normalize(); \
rc.range >>= 1; \
rc.code -= rc.range; \
rc_bound = UINT32_C(0) - (rc.code >> 31); \
rc.code += rc.range & rc_bound; \
dest = (dest << 1) + (rc_bound + 1); \
} while (0)
#define rc_direct_safe(dest, seq) \
do { \
rc_normalize_safe(seq); \
rc.range >>= 1; \
rc.code -= rc.range; \
rc_bound = UINT32_C(0) - (rc.code >> 31); \
rc.code += rc.range & rc_bound; \
dest = (dest << 1) + (rc_bound + 1); \
} while (0)
// NOTE: No macros are provided for bittree decoding. It seems to be simpler
// to just write them open in the code.
#endif
