/**
* \file lzma/subblock.h
* \brief Subblock filter
*
* \author Copyright (C) 1999-2006 Igor Pavlov
* \author Copyright (C) 2007 Lasse Collin
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*/
#ifndef LZMA_H_INTERNAL
# error Never include this file directly. Use <lzma.h> instead.
#endif
/**
* \brief Filter ID
*
* Filter ID of the Subblock filter. This is used as lzma_options_filter.id.
*/
#define LZMA_FILTER_SUBBLOCK LZMA_VLI_C(0x01)
/**
* \brief Subfilter mode
*
* See lzma_options_subblock.subfilter_mode for details.
*/
typedef enum {
LZMA_SUBFILTER_NONE,
/**<
* No Subfilter is in use.
*/
LZMA_SUBFILTER_SET,
/**<
* New Subfilter has been requested to be initialized.
*/
LZMA_SUBFILTER_RUN,
/**<
* Subfilter is active.
*/
LZMA_SUBFILTER_FINISH
/**<
* Subfilter has been requested to be finished.
*/
} lzma_subfilter_mode;
/**
* \brief Options for the Subblock filter
*
* Specifying options for the Subblock filter is optional: if the pointer
* options is NULL, no subfilters are allowed and the default value is used
* for subblock_data_size.
*/
typedef struct {
/* Options for encoder and decoder */
/**
* \brief Allowing subfilters
*
* If this true, subfilters are allowed.
*
* In the encoder, if this is set to false, subfilter_mode and
* subfilter_options are completely ignored.
*/
lzma_bool allow_subfilters;
/* Options for encoder only */
/**
* \brief Alignment
*
* The Subblock filter encapsulates the input data into Subblocks.
* Each Subblock has a header which takes a few bytes of space.
* When the output of the Subblock encoder is fed to another filter
* that takes advantage of the alignment of the input data (e.g. LZMA),
* the Subblock filter can add padding to keep the actual data parts
* in the Subblocks aligned correctly.
*
* The alignment should be a positive integer. Subblock filter will
* add enough padding between Subblocks so that this is true for
* every payload byte:
* input_offset % alignment == output_offset % alignment
*
* The Subblock filter assumes that the first output byte will be
* written to a position in the output stream that is properly aligned.
*
* FIXME desc
*/
uint32_t alignment;
# define LZMA_SUBBLOCK_ALIGNMENT_MIN 1
# define LZMA_SUBBLOCK_ALIGNMENT_MAX 32
# define LZMA_SUBBLOCK_ALIGNMENT_DEFAULT 4
/**
* \brief Size of the Subblock Data part of each Subblock
*
* This value is re-read every time a new Subblock is started.
*
* Bigger values
* - save a few bytes of space;
* - increase latency in the encoder (but no effect for decoding);
* - decrease memory locality (increased cache pollution) in the
* encoder (no effect in decoding).
*/
uint32_t subblock_data_size;
# define LZMA_SUBBLOCK_DATA_SIZE_MIN 1
# define LZMA_SUBBLOCK_DATA_SIZE_MAX (UINT32_C(1) << 28)
# define LZMA_SUBBLOCK_DATA_SIZE_DEFAULT 4096
/**
* \brief Run-length encoder remote control
*
* The Subblock filter has an internal run-length encoder (RLE). It
* can be useful when the data includes byte sequences that repeat
* very many times. The RLE can be used also when a Subfilter is
* in use; the RLE will be applied to the output of the Subfilter.
*
* Note that in contrast to traditional RLE, this RLE is intended to
* be used only when there's a lot of data to be repeated. If the
* input data has e.g. 500 bytes of NULs now and then, this RLE
* is probably useless, because plain LZMA should provide better
* results.
*
* Due to above reasons, it was decided to keep the implementation
* of the RLE very simple. When the rle variable is non-zero, it
* subblock_data_size must be a multiple of rle. Once the Subblock
* encoder has got subblock_data_size bytes of input, it will check
* if the whole buffer of the last subblock_data_size can be
* represented with repeats of chunks having size of rle bytes.
*
* If there are consecutive identical buffers of subblock_data_size
* bytes, they will be encoded using a single repeat entry if
* possible.
*
* If need arises, more advanced RLE can be implemented later
* without breaking API or ABI.
*/
uint32_t rle;
# define LZMA_SUBBLOCK_RLE_OFF 0
# define LZMA_SUBBLOCK_RLE_MIN 1
# define LZMA_SUBBLOCK_RLE_MAX 256
/**
* \brief Subfilter remote control
*
* When the Subblock filter is initialized, this variable must be
* LZMA_SUBFILTER_NONE or LZMA_SUBFILTER_SET.
*
* When subfilter_mode is LZMA_SUBFILTER_NONE, the application may
* put Subfilter options to subfilter_options structure, and then
* set subfilter_mode to LZMA_SUBFILTER_SET. This implies setting
* flush to true. No new input data will be read until the Subfilter
* has been enabled. Once the Subfilter has been enabled, liblzma
* will set subfilter_mode to LZMA_SUBFILTER_RUN.
*
* When subfilter_mode is LZMA_SUBFILTER_RUN, the application may
* set subfilter_mode to LZMA_SUBFILTER_FINISH. No new input data
* will be read until the Subfilter has been finished. Once the
* Subfilter has been finished, liblzma will set subfilter_mode
* to LZMA_SUBFILTER_NONE.
*
* If the intent is to have Subfilter enabled to the very end of
* the data, it is not needed to separately disable Subfilter with
* LZMA_SUBFILTER_FINISH. Using LZMA_FINISH as the second argument
* of lzma_code() will make the Subblock encoder to disable the
* Subfilter once all the data has been ran through the Subfilter.
*
* \note This variable is ignored if allow_subfilters is false.
*/
lzma_subfilter_mode subfilter_mode;
/**
* \brief Subfilter and its options
*
* When no Subfilter is used, the data is copied as is into Subblocks.
* Setting a Subfilter allows encoding some parts of the data with
* an additional filter. It is possible to many different Subfilters
* in the same Block, although only one can be used at once.
*
* \note This variable is ignored if allow_subfilters is false.
*/
lzma_options_filter subfilter_options;
} lzma_options_subblock;
