/**
* \file lzma/container.h
* \brief File formats
*
* \author Copyright (C) 1999-2008 Igor Pavlov
* \author Copyright (C) 2007-2008 Lasse Collin
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*/
#ifndef LZMA_H_INTERNAL
# error Never include this file directly. Use <lzma.h> instead.
#endif
/************
* Encoding *
************/
/**
* \brief Default compression preset
*
* It's not straightforward to recommend a default preset, because in some
* cases keeping the resource usage relatively low is more important that
* getting the maximum compression ratio.
*/
#define LZMA_PRESET_DEFAULT UINT32_C(6)
/**
* \brief Mask for preset level
*
* This is useful only if you need to extract the level from the preset
* variable. That should be rare.
*/
#define LZMA_PRESET_LEVEL_MASK UINT32_C(0x1F)
/*
* Preset flags
*
* Currently only one flag is defined.
*/
/**
* \brief Extreme compression preset
*
* This flag modifies the preset to make the encoding significantly slower
* while improving the compression ratio only marginally. This is useful
* when you don't mind wasting time to get as small result as possible.
*
* This flag doesn't affect the memory usage requirements of the decoder (at
* least not significantly). The memory usage of the encoder may be increased
* a little but only at the lowest preset levels (0-4 or so).
*/
#define LZMA_PRESET_EXTREME (UINT32_C(1) << 31)
/**
* \brief Calculate rough memory usage of easy encoder
*
* This function is a wrapper for lzma_raw_encoder_memusage().
*
* \param preset Compression preset (level and possible flags)
*/
extern uint64_t lzma_easy_encoder_memusage(uint32_t preset)
lzma_attr_pure;
/**
* \brief Calculate rough decoder memory usage of a preset
*
* This function is a wrapper for lzma_raw_decoder_memusage().
*
* \param preset Compression preset (level and possible flags)
*/
extern uint64_t lzma_easy_decoder_memusage(uint32_t preset)
lzma_attr_pure;
/**
* \brief Initialize .xz Stream encoder using a preset number
*
* This function is intended for those who just want to use the basic features
* if liblzma (that is, most developers out there).
*
* \param strm Pointer to lzma_stream that is at least initialized
* with LZMA_STREAM_INIT.
* \param preset Compression preset to use. A preset consist of level
* number and zero or more flags. Usually flags aren't
* used, so preset is simply a number [0, 9] which match
* the options -0 .. -9 of the xz command line tool.
* Additional flags can be be set using bitwise-or with
* the preset level number, e.g. 6 | LZMA_PRESET_EXTREME.
* \param check Integrity check type to use. See check.h for available
* checks. If you are unsure, use LZMA_CHECK_CRC32.
*
* \return - LZMA_OK: Initialization succeeded. Use lzma_code() to
* encode your data.
* - LZMA_MEM_ERROR: Memory allocation failed. All memory
* previously allocated for *strm is now freed.
* - LZMA_OPTIONS_ERROR: The given compression level is not
* supported by this build of liblzma.
* - LZMA_UNSUPPORTED_CHECK: The given check type is not
* supported by this liblzma build.
* - LZMA_PROG_ERROR: One or more of the parameters have values
* that will never be valid. For example, strm == NULL.
*
* If initialization succeeds, use lzma_code() to do the actual encoding.
* Valid values for `action' (the second argument of lzma_code()) are
* LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future,
* there may be compression levels or flags that don't support LZMA_SYNC_FLUSH.
*/
extern lzma_ret lzma_easy_encoder(
lzma_stream *strm, uint32_t preset, lzma_check check)
lzma_attr_warn_unused_result;
/**
* \brief Initialize .xz Stream encoder using a custom filter chain
*
* \param strm Pointer to properly prepared lzma_stream
* \param filters Array of filters. This must be terminated with
* filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for
* more information.
* \param check Type of the integrity check to calculate from
* uncompressed data.
*
* \return - LZMA_OK: Initialization was successful.
* - LZMA_MEM_ERROR
* - LZMA_OPTIONS_ERROR
* - LZMA_PROG_ERROR
*/
extern lzma_ret lzma_stream_encoder(lzma_stream *strm,
const lzma_filter *filters, lzma_check check)
lzma_attr_warn_unused_result;
/**
* \brief Initialize .lzma encoder (legacy file format)
*
* The .lzma format is sometimes called the LZMA_Alone format, which is the
* reason for the name of this function. The .lzma format supports only the
* LZMA1 filter. There is no support for integrity checks like CRC32.
*
* Use this function if and only if you need to create files readable by
* legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format
* is strongly recommended.
*
* The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH.
* No kind of flushing is supported, because the file format doesn't make
* it possible.
*
* \return - LZMA_OK
* - LZMA_MEM_ERROR
* - LZMA_OPTIONS_ERROR
* - LZMA_PROG_ERROR
*/
extern lzma_ret lzma_alone_encoder(
lzma_stream *strm, const lzma_options_lzma *options)
lzma_attr_warn_unused_result;
/************
* Decoding *
************/
/**
* This flag makes lzma_code() return LZMA_NO_CHECK if the input stream
* being decoded has no integrity check. Note that when used with
* lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK
* if LZMA_TELL_NO_CHECK is used.
*/
#define LZMA_TELL_NO_CHECK UINT32_C(0x01)
/**
* This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input
* stream has an integrity check, but the type of the integrity check is not
* supported by this liblzma version or build. Such files can still be
* decoded, but the integrity check cannot be verified.
*/
#define LZMA_TELL_UNSUPPORTED_CHECK UINT32_C(0x02)
/**
* This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type
* of the integrity check is known. The type can then be got with
* lzma_get_check().
*/
#define LZMA_TELL_ANY_CHECK UINT32_C(0x04)
/**
* This flag enables decoding of concatenated files with file formats that
* allow concatenating compressed files as is. From the formats currently
* supported by liblzma, only the .xz format allows concatenated files.
* Concatenated files are not allowed with the legacy .lzma format.
*
* This flag also affects the usage of the `action' argument for lzma_code().
* When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END
* unless LZMA_FINISH is used as `action'. Thus, the application has to set
* LZMA_FINISH in the same way as it does when encoding.
*
* If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH
* as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required.
*/
#define LZMA_CONCATENATED UINT32_C(0x08)
/**
* \brief Initialize .xz Stream decoder
*
* \param strm Pointer to properly prepared lzma_stream
* \param memlimit Rough memory usage limit as bytes
*
* \return - LZMA_OK: Initialization was successful.
* - LZMA_MEM_ERROR: Cannot allocate memory.
* - LZMA_OPTIONS_ERROR: Unsupported flags
*/
extern lzma_ret lzma_stream_decoder(
lzma_stream *strm, uint64_t memlimit, uint32_t flags)
lzma_attr_warn_unused_result;
/**
* \brief Decode .xz Streams and .lzma files with autodetection
*
* This decoder autodetects between the .xz and .lzma file formats, and
* calls lzma_stream_decoder() or lzma_alone_decoder() once the type
* of the input file has been detected.
*
* \param strm Pointer to properly prepared lzma_stream
* \param memlimit Rough memory usage limit as bytes
* \param flags Bitwise-or of flags, or zero for no flags.
*
* \return - LZMA_OK: Initialization was successful.
* - LZMA_MEM_ERROR: Cannot allocate memory.
* - LZMA_OPTIONS_ERROR: Unsupported flags
*/
extern lzma_ret lzma_auto_decoder(
lzma_stream *strm, uint64_t memlimit, uint32_t flags)
lzma_attr_warn_unused_result;
/**
* \brief Initialize .lzma decoder (legacy file format)
*
* Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH.
* There is no need to use LZMA_FINISH, but allowing it may simplify
* certain types of applications.
*
* \return - LZMA_OK
* - LZMA_MEM_ERROR
*/
extern lzma_ret lzma_alone_decoder(lzma_stream *strm, uint64_t memlimit)
lzma_attr_warn_unused_result;
