Age | Commit message (Collapse) | Author | Files | Lines |
|
This code was not activated at all, and hard coded as disabled in syshead.h
with this code snippet:
/*
* Pthread support is currently experimental (and quite unfinished).
*/
#if 1 /* JYFIXME -- if defined, disable pthread */
#undef USE_PTHREAD
#endif
So no matter if --enable-pthread when running ./configure or not, this feature
was never enabled in reality. Further, by removing the blocker code above made
OpenVPN uncompilable in the current state.
As the threading part needs to be completely rewritten and pthreading will not be
supported in OpenVPN 2.x, removing this code seems most reasonable.
In addition, a lot of mutex locking code was also removed, as they were practically
NOP functions, due to pthreading being forcefully disabled
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
The main task of this patch is to avoid reporting the SCRIPT_SECURITY_WARNING
over and over again, in addition to not show this warning when it should not
be a problem. This general warning should now only appear once, and only when
--script-security is not set, 0 or 1. In all other cases this warning should
not appear.
In addition, this warning will come close to the script-hook which most probably
will fail. It will also give a little bit more concrete hint on which script-hook
which failed. If --script-security is 2 or 3, only the execve failure itself will
be shown. This message will on the other hand be shown repeatedly.
This is a new rewritten version which simplifies the implementaion of the new
openvpn_run_script() function. It was considered to remove it completely, but
due to code clearity and easy of use it was decided to make this function a static
inline function instead. Anyhow, this function will enforce openvpn_execve_check()
to be called with the S_SCRIPT flag.
Patch ACKed on the developers meeting 2009-04-29.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6347 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
commands.
When only a single IP address is desired from a multi-address DNS
expansion, use the first address rather than a random selection.
Version 2.1.1l
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6291 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was not being compiled in.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5620 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
The main task of this patch is to avoid reporting the SCRIPT_SECURITY_WARNING
over and over again, in addition to not show this warning when it should not
be a problem. This general warning should now only appear once, and only when
--script-security is not set, 0 or 1. In all other cases this warning should
not appear.
In addition, this warning will come close to the script-hook which most probably
will fail. It will also give a little bit more concrete hint on which script-hook
which failed. If --script-security is 2 or 3, only the execve failure itself will
be shown. This message will on the other hand be shown repeatedly.
This is a new rewritten version which simplifies the implementaion of the new
openvpn_run_script() function. It was considered to remove it completely, but
due to code clearity and easy of use it was decided to make this function a static
inline function instead. Anyhow, this function will enforce openvpn_execve_check()
to be called with the S_SCRIPT flag.
Patch ACKed on the developers meeting 2009-04-29.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5599 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
socket is created rather than waiting until after connect/listen.
Version 2.1.1d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5514 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Based on a discussion on the mailing list and in the IRC meeting Feb 18,
it was decided to remove get_random() from the getaddr() function as that
can conflict with round-robin/randomization done by DNS servers.
This change must be documented in the release notes.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4843 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4477 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
with unix domain sockets.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4128 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Telethra to OpenVPN Technologies.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3409 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
domain socket, for example:
management /tmp/openvpn unix
Also added management-client-user and management-client-group
directives to control which processes are allowed to connect
to the socket.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3396 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was incorrectly expecting the lladdr parameter to be an IP address
when it is actually a MAC address (HoverHell).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3339 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to more closely conform to RFC 3696:
* DNS name length must not exceed 255 characters
* DNS name characters must be limited to alphanumeric,
dash ('-'), and dot ('.')
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3312 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
arguments since all scripts were called by system().
The security hardening changes made to 2.1_rc9 no longer
use system(), but rather use the safer execve or CreateProcess
system calls. The security hardening also introduced a
backward incompatibility with 2.1_rc8 and earlier in that
script parameters were no longer shell-expanded, so
for example:
client-connect "docc CLIENT-CONNECT"
would fail to work because execve would try to execute
a script called "docc CLIENT-CONNECT" instead of "docc"
with "CLIENT-CONNECT" as the first argument.
This patch fixes the issue, bringing the script argument
semantics back to pre 2.1_rc9 behavior in order to preserve
backward compatibility while still using execve or CreateProcess
to execute the script/executable.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3311 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
from server (rather than only IP address) for --ifconfig, --route, and
--route-gateway. OpenVPN versions 2.1_rc7 and earlier allowed DNS names
for these options to be pulled and translated to IP addresses by default.
Now --allow-pull-fqdn will be explicitly required on the client to enable
DNS-name-to-IP-address translation of pulled options.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3307 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
by client from server. Fixes --iproute vulnerability.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3126 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* All external programs and scripts are now called by execve() on unix and
CreateProcess on Windows.
* The system() function is no longer used.
* Argument lists for external programs and scripts are now built by the new
argv_printf function which natively outputs to string arrays (i.e.
char *argv[] lists), never truncates its output, and eliminates the security
issues inherent in formatting and parsing command lines, and dealing with
argument quoting.
* The --script-security directive has been added to offer policy controls on
OpenVPN's execution of external programs and scripts.
Also added a new plugin example (openvpn/plugin/examples/log.c) that logs
information to stdout for every plugin method called by OpenVPN.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3122 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
maximum size passed to setsockopt SNDBUF/RCVBUF.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3062 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3048 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2995 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
http://svn.openvpn.net/projects/openvpn/test/conn
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2993 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY plugin handler.
See documentation in openvpn-plugin.h and example
usage in plugin/defer/simple.c.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2969 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2959 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
"TCP: connect to %s failed, will try again in %d seconds: %s"
is output.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@2633 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
proto_overhead, however this should be fixed.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1434 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
it will cause bind to succeed on port conflicts.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1428 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
OPENVPN_STATE_RESOLVE -- DNS lookup */
OPENVPN_STATE_TCP_CONNECT -- Connecting to TCP server
Echo management state change to log.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@1068 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@899 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
server to share the same port number.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@893 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
management GUI app rather than be connected to as a server.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@884 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
proxy settings (currently Windows only).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@850 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
./openvpn --dev tap --proto tcp-client --verb 4 --remote [Black-Hole-IP-Addr] --connect-retry-max 1 --remap-usr1 SIGTERM
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@826 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
on TCP client connection attempts (doesn't work on all
OSes). This patch also makes OpenVPN signalable during
TCP connection attempts.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@823 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
connect-retry-max option from
/contrib/alon/BETA21@783.
Added uninit_management_callback call to
init_instance_handle_signals so that
signals thrown during initialization can
bring us back to a management hold.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@786 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@781 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
svn merge -r 737:749 $SO/trunk/openvpn
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@750 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
socket bind would fail.
Pre-2.1-beta4
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@635 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Still need some pedantic cleanup in pkcs11.c.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@624 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Added --bind option for TCP client connections (Ewan Bhamrah Harley).
Pre-2.1-beta3
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@623 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Merged --multihome patch + aggregated sockflags.
Pre-2.1_beta3
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@622 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@601 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@581 e7ae566f-a301-0410-adde-c780ea21d3b5
|