| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some older GCC compilers don't like that variables are declared
in the middle of the code, and expect them on the top in the
block/scope.
Trac-ticket: 99
Signed-off-by: Simon Matter <simon.matter@invoca.ch>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
The tmp_dir string is required in the options struct regardless of options
so spin it out of #if conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
ps.c - The feat_ipv6_transport patch set modifies struct openvpn_sockaddr by
adding a union named 'addr' in commit 8335caf929f21b31.
ssl.c - A needed } and #endif had been dropped by a mistake
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Pulling in changes from James' 2.1/openvpn branch in SVN.
Conflicts:
buffer.c
init.c
manage.h
multi.c
openvpn.8
options.c
ssl.c
version.m4
win/sign.py
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Version 2.1.3w
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7219 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
details).
Increase the timeout after SIGUSR1 restart when restart is not
due to server_poll_timeout.
Version 2.1.3v
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7215 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Don't call SSL_CTX_set_client_CA_list or SSL_CTX_set_client_CA_list
if not running in server mode (these functions are only useful for
TLS/SSL servers).
Modified openvpn_snprintf to return false on overflow, and true
otherwise.
When AUTH_FAILED,... is received, log the full string.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7213 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
configure option. ipconfig on Mac has certain behavior that makes
it unsuitable for use by OpenVPN to configure tun/tap interface.
Version 2.1.3u
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7191 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7152 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
command on failure once every second for up to 15 seconds. This
is necessary to work around an issue observed on OSX 10.5 where
the ipconfig command sometimes fails if executed immediately after
the tun device open.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7151 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
crash with output like this:
TCP connection established with 85.190.0.3:41781
85.190.0.3:41781 SIGTERM[soft,port-share-redirect] received, client-instance exiting
MANAGEMENT: TCP recv error: Socket operation on non-socket
MANAGEMENT: Client disconnected
MANAGEMENT: Triggering management exit
Exiting due to fatal error
EVENT: epoll_ctl EPOLL_CTL_MOD failed, sd=6: Bad file descriptor (errno=9)
Then an error like this for every incoming connection that should be
proxied:
76.120.71.74:55302 PORT SHARE: sendmsg failed -- unable to communicate with background process (6,8,-1,-1): Connection refused (errno=111)
Version 2.1.3s
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7127 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
UDP sessions when the client daemon was running in UDP/TCP adaptive
mode, and transitioned from TCP to UDP.
The bug would cause a single dropped packet in UDP mode to trigger a
barrage of packet replay errors followed by a disconnect and
reconnect.
Version 2.1.3r
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7125 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
false positive packet replays.
Version 2.1.3q.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7109 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
enable the use of ipconfig (instead of ifconfig) for configuring the
IP address and netmask of the tun/tap adapter.
Version 2.1.3p
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7092 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
pushed by server, and that is used to offer a temporary session
token to clients that can be used in place of a password on
subsequent credential challenges.
This accomplishes the security benefit of preventing caching
of the real password while offering most of the advantages
of password caching, i.e. not forcing the user to re-enter
credentials for every TLS renegotiation or network hiccup.
auth-token does two things:
1. if password caching is enabled, the token replaces the
previous password, and
2. if the management interface is active, the token is output
to it:
>PASSWORD:Auth-Token:<token>
Also made a minor change to HALT/RESTART processing when password
caching is enabled. When client receives a HALT or RESTART message,
and if the message text contains a flags block (i.e. [FFF]:message),
if flag 'P' (preserve auth) is present in flags, don't purge the Auth
password. Otherwise do purge the Auth password.
Version 2.1.3o
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7088 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7086 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7069 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
within handshake-window seconds.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7066 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to accept an optional message string. The message string format is:
RESTART|HALT,<human-readable-message>
RESTART will tell the client to restart (i.e. SIGUSR1).
HALT will tell the client to exit (i.e. SIGTERM).
On the client, human-readable-message will be communicated via
management interface:
>NOTIFY,<severity>,<type>,<human-readable-message>"
Version 2.1.3m
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7063 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
PORT SHARE: sendmsg failed (unable to communicate with background process)
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7062 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
a server if it sent multiple push requests due to the server being
slow to respond. This could cause the client to process pushed
options twice, leading to duplicate pushed routes, among other issues.
The fix, implemented server-side, is to reply only once to a push
request even if multiple requests are received.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7060 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
in chain (as tls_serial_n vars), rather than only tls_serial_0.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@7055 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
verbosity generated by port-share activity.
Version 2.1.3k
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7033 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
reporting client IP origins of proxied connections.
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7031 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
LZO, but that has limited interoperability with LZO-enabled servers.
Modified "push-peer-info" option to push IV_LZO_STUB=1 to server when
client was built with --enable-lzo-stub configure option. This tells
the server that the client lacks LZO capabilities, so the server
should turn off LZO compression for this client via "lzo no".
Added "setenv PUSH_PEER_INFO" option having the same effect as
"push-peer-info".
Version 2.1.3j
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7023 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Conflicts:
options.c
- feat_ipv6_payload and feat_ip6_transport both updates
this file with presence information
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
|
|
removed mutex locking stuff (no more threading in 2.2)
fixed rebase/merge artifacts in mroute.c
add current ChangeLog.IPv6 and TODO.IPv6 to commit
tag as ipv6-20110424-2
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
Solaris close_tun(): add explicit "unplumb'ing" of IPv6 tun/tap
interfaces, otherwise they would linger around after OpenVPN exits.
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
document Linux tun fixes and test results in ChangeLog.IPv6
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
"dev tun"+"topology subnet" - moved code out of "if (tun)" block, works.
add more debug information to help diagnose cases where IPv6 isn't working
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
version 9.7 as anticipated (that's 2.1.3) but 9.8 - change test to
require 9.8, and change message to point to 2.2-beta3 and up.
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
build t_client.sh by configure at run-time, with proper paths to
ip/ifconfig/netstat binaries, and (most important) with proper #!SHELL
extend configure.ac to find "netstat" binary and to chmod +x "t_client.sh"
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
run from "make check" if "t_client.rc" is found in workdir or srcdir
(copy t_client.rc-sample, fill in specifics for your test server)
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
destroy tunX interface on tun_close()
tested on OpenBSD 4.7
Signed-off-by: Gert Doering <gert@greenie.muc.de>
|
|
replace with #ifdef DEBUG_VERBOSE_SETENV compile-time flag
|
|
|
|
than 9.7, log warning and disable IPv6 (won't work anyway).
|
|
(otherwise netsh.exe will succeed, but silently ignore request)
|
|
use special next-hop address (fe80::8) that tapdrv will handle ND for
|
|
|
|
|
|
- initialize tuntap->ipv6 in init.c::do_init_tun(), to make sure it's
setup "early enough", no matter what ifconfig_order() wants
- change call convention for open_tun(): drop "ipv6" flag, because it's
incompatible with windows/openbsd calling sequence (ifconfig first,
open_tun later) - also affects open_tun_generic() and tuncfg().
- drop ipv6_support() helper function - has no useful purpose anymore
- introduce add_route_connected_v6_net() helper for Win32, Darwin, Netbsd
(cleanup code)
- fix NetBSD tunnel setup - destroy/recreate before ifconfig'ing, to make
sure no leftover configuration lingers on tunnel from previous call
(NetBSD tunnels are always persistent unless explicitely destroyed)
- DARWIN (MacOS X) gets its own #ifdef section for open_tun()/close_tun()
now, because close_tun() needs to cleanup IPv6 ifconfig
|
|
- somewhat preliminary, as the next-hop setting requirements of tun/tap
driver are not decided yet, and "route add" might need to be adapted
|
|
"netsh.exe" can find "framedyn.dll" (needs work)
|
|
- create inet_ntop() and inet_pton() wrap-implementations using
WSAAddressToString() and WSAStringToAddress() functions
- add relevant win32-only headers to syshead.h
NOTE: syshead.h changes are already included in ipv6_transport
|
|
--version: change printing of IPv6 payload patch version to [...] style
fix "make check" regression in tun.c (unnecessary change reverted)
|
|
do not have TUNSIFHEAD (and do not have IPv6 capable tunnels), fall back
to old IPv4-only code without address-family prepending.
(cherry picked from commit 2a57c58b185deb11b0a62c584489fff59258146c)
|
|
(cherry picked from commit 5df8fe6b0eb3c0f351f322b4690e4d9388980aba)
|
|
(cherry picked from commit ec9dce6387afd198881493bfebf13bb121e8a56b)
|
|
|
|
|
|
--version: change printing of IPv6 payload patch version to [...] style
fix "make check" regression in tun.c (unnecessary change reverted)
|
|
affects options.h, options.c, multi.c
benefit: static IPv6 address assignment from radiusplugin (etc)
rewritten get_ipv6_addr() to handle IPv6 addresses with and without "/bits"
affects route.c and mainly options.c
benefit: ifconfig-ipv6, ifconfig-ipv6-pool can now be accept
configurations with networks != /64 (the rest of the implementation
is not yet completely there, but this is imporant preparation work to
be able to add /bits to "push 'ifconfig-ipv6 ...'" later on without
breaking clients
do not try to add/delete IPv6 routes if no IPv6 on tunnel
affects: route.c
benefit: avoid error messages, and make IPv6 troubleshooting easier
flag as "config error" if --ifconfig-ipv6-pool used without --ifconfig-ipv6
flag as "config error" if --ifconfig-ipv6-pool used without --server
print warning if --ifconfig-ipv6 is used without --tun-ipv6
changes documented in more detail in ChangeLog.IPv6
* release patch set 20100114-1
(cherry picked from commit c04f774c7e9bed602818b1fe2ff4e83cf913d471)
|
|
(cherry picked from commit ea382a1d550ac100d27c8118777e3160c85d06d2)
|
|
do not have TUNSIFHEAD (and do not have IPv6 capable tunnels), fall back
to old IPv4-only code without address-family prepending.
(cherry picked from commit 2a57c58b185deb11b0a62c584489fff59258146c)
|
|
(cherry picked from commit 5df8fe6b0eb3c0f351f322b4690e4d9388980aba)
|
|
(cherry picked from commit ec9dce6387afd198881493bfebf13bb121e8a56b)
|
|
Signed-off-by: Robert Fischer <ml-openvpn@trispace.org>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Robert Fischer <ml-openvpn@trispace.org>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Commit df5a4380c3931520d5fae2b18f0fc2e67a883aae copies this function
from buffer.c to service-win32/openvpnserv.c. Any changes on either
places should be done in both implementations.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
A quick and dirty compile fix was introduced in commit 77d244050964525417,
and was accepted under the condition that it would be a temporary fix.
As the usage of _snprintf() is realy not ideal on Windows, this patch
uses the same well tested openvpn_snprintf() function from buffer.c.
It was a longer discussion of several possibilities to re-use that code,
but in the end it seemed easier to just copy-paste this function to
openvpnserv.c for now.
The reason for this conclusion was that the function is really simple,
well defined and will most likely not be changed much in the future.
It is also added a comment in openvpnserv.c where this function
has its origins.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
This bug was introduced in commit 110e42d199e735ab1a31388c5678f59d0fa9510c.
Trac-ticket: 120
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Since MingW for quite a long time (since 3.2 in 2008?) has defined
'uint32_t' etc. in it's <stdint.h>, we need to guard against defining
them again. Ideally we should figure out in what version of MingW
this happened. But for now:
Signed-off-by: Gisle Vanem <gvanem@broadpark.no>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Track-ticket: 114
Signed-off-by: rf <ml-openvpn@trispace.org>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Trac-ticket: 115
Signed-off-by: rf <ml-openvpn@trispace.org>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
The win/config_ti.py build script assumes to find ../tapinstall/7600/sources.in
which does not exists in devcon.exe source code directory. This makes
config_ti.py look for ../tapinstall/7600/sources instead.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
In commit 4e1cc5f6dda22e9 the create_temp_filename() function was
reviewed and hardened, which in the end renamed this function to
create_temp_file() in commit 495e3cec5d156.
With these changes it became more evident that OpenVPN needs a directory
where it can create temporary files. The create_temp_file() will create
such files f.ex. if --client-connect or --plugin which makes use of
the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY hook, such as openvpn-auth-pam.so.
When this happens, OpenVPN will normally create these files in the directory
OpenVPN was started. In many cases, this will fail due to restricted access.
By using --tmp-dir and pointing it to a directory writeable to the user
running OpenVPN, it works again.
This patch makes OpenVPN use a more suitable temproary directory by default,
instead of the current working directory. On non-Windows platforms this
default value is set to '/tmp', but can be modified at compile-time by
running ./configure --with-tmp-dir-path=<TEMP DIR PATH>. On Windows, it
will use GetTempPath() to find temporary paths recommended by the OS. If
this fails, it will fallback to the old behaviour, using the directory
where OpenVPN was started.
In any cases, this default value can be overridden in the configuration
file by using the --tmp-dir option, as before.
To check what the default is at runime, you can see this easily by doing
this:
$ ./openvpn --verb 4 --dev tun | grep tmp_dir
Signed-off-by: David Sommerseth <davids@redhat.com>
Tested-by: Jan Just Keijser <janjust@nikhef.nl>
Acked-by: Gert Doering <gert@greenie.muc.de>
|
|
with output like this:
TCP connection established with 85.190.0.3:41781
85.190.0.3:41781 SIGTERM[soft,port-share-redirect] received, client-instance exiting
MANAGEMENT: TCP recv error: Socket operation on non-socket
MANAGEMENT: Client disconnected
MANAGEMENT: Triggering management exit
Exiting due to fatal error
EVENT: epoll_ctl EPOLL_CTL_MOD failed, sd=6: Bad file descriptor (errno=9)
Then an error like this for every incoming connection that should be
proxied:
76.120.71.74:55302 PORT SHARE: sendmsg failed -- unable to communicate with background process (6,8,-1,-1): Connection refused (errno=111)
Version 2.1.3s
|
|
As agreed in last thursday's IRC meeting [1], I've added a comment to the
code explaining "--rdns-internal". It's really very much an internal
option, so it does not need to go to the man page.
[1] http://thread.gmane.org/gmane.network.openvpn.devel/4573
Signed-off-by: Gert Doering <gert@greenie.muc.de>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Trac-ticket: 107
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Commit 2e8337de248ef0b5b48cbb2964da0d5c3f28b15b introduced a new
feature for using other SSL certificate fields for authentication
than the CN field.
This commit introduced a bug, which made the verify_callback()
function getting called even if --client-cert-not-required was
enabled in the config.
The reason for this was that an 'else' statement was lacking a
couple of curly braces. The offending commit in reality moved
the setup of the verify_callback() function out of the 'else'
statement.
Report-URL: https://community.openvpn.net/openvpn/ticket/108
Report-URL: https://forums.openvpn.net/topic7751.html
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: Jan Just Keijser <janjust@nikhef.nl>
|
|
|
|
|
|
- _both_ for IPv4 (which was missing) and for IPv6
- tested on OpenBSD 4.7, FreeBSD 8.1
|
|
- closes http://bugs.debian.org/574164
- also needed for --disable-ipv6 builds
- supports IPv6 from xinetd
|
|
- setsockopt IPV6_RECVPKTINFO (not IPV6_PKTINFO!)
- do check for setsockopt() failures
- append %<iface> in INFO msg
|
|
size, not the full 4+6 union, also use saner variable names.
|
|
nothing to do w/ipv6 transport afterall.
|
|
* document {un,}trusted_ip6 in manpage
|
|
|
|
|
|
|
|
|
|
ipv6 endpoints
|
|
- cmdline options help: add tcp6/udp6 missing messages
- win32: expand usage of proto_is_udp(), proto_is_tcp()
- replace some memset(&obj, 0, sizeof obj) by openvpn's CLEAR(obj)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
althought sorta hacky, see TODO.ipv6.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
was incorrectly creating a PF_INET socket
|
|
- tests now are pass (and fail) properly for ipv6/4 builds
* more GNU indenting
|
|
GNU indentation for my deltas
|
|
* tests Ok: {loopback,remote}{udp,tcp}{4,6}
|
|
next: merge ipv{4,6} signal logic into one inside resolve_remote()
* passes {loopback,remote}{udp,tcp}{4,6} tests
|
|
* passes {udp,tcp}x{v4,v6} loopback tests
* passes {udp,tcp}x{v6} remote tests
|
|
Signed-off-by: chantra <chantra@debuntu.org>
Acked-By: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Added the ability to have "COMMONNAME" replaced with certificate common
name in pam conversation.
Signed-off-by: Joe Patterson <j.m.patterson@gmail.com>
Acked-By: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
A additional ';' had sneaked in commit 4c4b8cedfa98e8892a53. Lets
kick it out again.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Commit 2db5a0ac3e053857d97e468de53e70a605f54561 adds two arguments to
plugin_call(...), but missed the !ENABLE_PLUGIN case. With
!ENABLE_PLUGIN, plugin_call(...) is only a dummy, so add these two
parameters there too.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
After a review of the second round of the the v3 plug-in implementation, it
was decided to use a separate constant defining the version of the structs
used for argument and return value passing, instead of OPENVPN_PLUGIN_VERSION.
To not make it too complex, this patch uses a shared version constant for all
the v3 structures. It is not expected that these strucutures will change too
much and too often.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
To build the plug-in, do ./build log_v3 in the plugin/examples directory.
This plug-in can be tested by running an OpenVPN server like this:
# ./openvpn --plugin plugin/examples/log_v3.so --dev tun \
--server 192.168.240.0 255.255.255.0 --ca sample-keys/ca.crt \
--cert sample-keys/server.crt --key sample-keys/server.key \
--dh sample-keys/dh1024.pem
The client can be started like this:
# ./openvpn --client --remote localhost --ca sample-keys/ca.crt \
--cert sample-keys/client.crt --key sample-keys/client.key \
--dev tun --nobind --auth-user-pass
This plug-in will only log arguments and environment variables it receives
during all the different plug-in phases OpenVPN currently supports. It will
also parse the X509 certificate information given during the TLS_VERIFY phase.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
The certificates sent to the plug-in API will only happen during the
OPENVPN_PLUGIN_TLS_VERIFY phase and will contain a pointer to the OpenSSL
X509 certificate data.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
Let OpenVPN call the openvpn_plugin_open_v3() and
openvpn_plugin_func_v3() plug-in functions if they exist in the plug-in.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
This just implements the basic API changes needed for the newer and more
flexible plug-in API.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
Normally OpenVPN is configured with --dev {tun,tap}, but it is also possible
to use --dev myvpn instead. In these situations, OpenVPN will request
--dev-type as well to be able to set up a tun or tap device properly.
The 'dev' environment variable will contain the value provided by --dev. In
those cases where the plug-in/script need to behave differently when using a tun
device versus using a tap device, there are no possibilities for it to know what
kind of device --dev myvpn would be.
This patch adds a 'dev_type' environment variable which contains a string of the
device type, either automatically discovered based on the --dev name, or set using
the --dev-type option.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
Fixed issue where "signal SIGTERM" entered from the management
interface might get subsequently downgraded to a SIGUSR1.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6716 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
instead of "key" in client mode, and allows the client to run
without the need to load the actual private key. When the SSL
protocol needs to perform an RSA sign operation, the data to
be signed will be sent to the management interface via a
notification as follows:
>RSA_SIGN:[BASE64_DATA]
The management interface client should then sign BASE64_DATA
using the private key and return the signature as follows:
rsa-sig
[BASE64_SIG_LINE]
.
.
.
END
This capability is intended to allow the use of arbitrary
cryptographic service providers with OpenVPN via the
management interface.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6708 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Peter Korsgaard <jacmet@sunsite.dk> reported an issue [1] when compiling
with --disable-crypto activated. He suggested a patch, which only
partly solved the issue. SVN r6568 / commit 3cf9dd88fd84108 added a
new feature which further made it impossible to compile without crypto.
This patch fixes both issues, based on Peter Korsgaard's patch.
[1] <http://sourceforge.net/mailarchive/forum.php?thread_name=87fwx08bod.fsf%40macbook.be.48ers.dk&forum_name=openvpn-devel>
Signed-off-by: James Yonan <james@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
This allows using other X509 certificate fields for the certificate
authentication. To use altSubjectName, use
--x509-username-field ext:altSubjectName
This feature requires OpenVPN to be built with --enable-x509-alt-username
This patch is slightly modified, to honour --enable-x509-alt-username
compile time configuration. Two #ifdef's are added.
Signed-off-by: Markus Koetter <koetter@rrzn-hiwi.uni-hannover.de>
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
It should be sufficient to just try to see if socklen_t is defined.
Next, on all platforms it would be int in all other platforms.
And, there is no need to check for the type in monolitic environment
like Windows, as it will be always the same.
Currently it fails cross compile windows in mingw-w64 compiler, as
winsock.h is as follows:
"""
/* define WINSOCK_API_LINKAGE and WSAAPI for less
* diff output between winsock.h and winsock2.h, but
* remember to undefine them at the end of file */
"""
And the macro uses these macros which are internal winsock macros and
should not be used anyway.
Also, when did the autodefs.h went mandatory? Why is it in
tap-win32/common.h while no constant is actually used?
The use of WSA_IO_INCOMPLETE without including winsock2.h is invalid!
Look at http://msdn.microsoft.com/en-us/library/aa921087.aspx
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
It is not clear in the manual that this feature is disabled
by default.
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: Gert Doering <gert@greenie.muc.de>
|
|
By giving the "t" flag to _fdopen() on Windows, the file will be
opened in a "translate mode", where it will take care of converting
\n to \r\n, and also look for the CTRL-Z mark when opening the log
file in append mode.
Reference:
<http://msdn.microsoft.com/en-us/library/dye30d82%28VS.80%29.aspx>
Thanks to Alon Bar-Lev for pointing out this solution.
Reported-by: Thomas Reifferscheid
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: Gert Doering <gert@greenie.muc.de>
|
|
Removed reference to config-win32.h, which has been removed. Added
management-notes.txt to dist_doc_DATA.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
The original config-win32.h - a static header file - has been superceded by both
"domake-win" script and the new Python-based buildsystem. Transformed it into a
template file, win/config.h.in, which obtains the most commonly used build
parameters from win/settings.in.
Added support code to win/config.py and win/wb.py to preprocess win/config.h.in
and copy it to config.h, from where source and header files can find it.
Removed all references to config-win32.h. Also removed obsolete
PACKAGE_BUGREPORT and USE_PTHREAD variables from the win/config.h.in file.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Added support for generating installer with unsigned TAP drivers. Fixed Windows
Vista/7 Start menu shortcut uninstall failure.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Removed win/make_dist.py's dependency on TAP-driver and tapinstall.exe building.
Also added manifest embedding commands to win/make_dist.py. To avoid duplicate
code moved the "build_vc" method from win/build.py to win/wb.py and renamed it
"run_in_vs_shell".
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
* install-win32/settings.in: bump version to 9.7, TAP_RELDATE to "07/03/2010".
* tap-win32/proto.h: add data types and definitions needed for IPv6
* tap-win32/types.h: add m_UserToTap_IPv6 ethernet header for IPv6 packets
* tap-win32/tapdrvr.c: implement support for IPv6 in TUN mode:
- IPv6 packets User->OS need correct ether type
- IPv6 packets OS->User get correctly forwarded
- IPv6 neighbour discovery packets for "fe80::8" (magic address
installed as route-nexthop by OpenVPN.exe) get answered locally
(cherry picked from commit 175e17a5abd5969f6803a9cc9587b7959e1100ae)
Signed-off-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
See the chkconfig(8) man page for details.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
The config-win32.h and service-win32/msvc.mak was not included
into the final source balls when using 'make dist', which is
crucial for Windows building.
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: Samuli Seppänen <samuli@openvpn.net>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
This is intended just as a TEMPORARY solution to get the 2.2-RC released.
The intesion is to get this fixed with a better solution for the final 2.2
release. This patch has also been discussed here:
http://thread.gmane.org/gmane.network.openvpn.devel/4325/
The only reason for this patch to be accepted in its current shape, is
that it will be fixed before the final 2.2 release.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <davids@redhat.com>
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Implemented changes to the buildsystem patchset suggested by jamesyonan in IRC
meeting on 17th Feb 2010:
1) Remove variables added to version.m4 and use win/settings.in instead
2) Add ENABLE_<FEATURE> configuration to win/settings.in instead of parsing
config-win32.h for them
This patch applies on top of the previous 13 patches.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
This win/openvpn.nsi file is a heavily cleaned-up version of the
install-win32/openvpn.nsi file. The key differences:
- paths have been adapted to new buildsystem's requirements
- obsolete XGUI support has been removed
- unused Windows version detection has been removed
- variables specific to new build system (win/settings.in, version.m4) are
imported
- a few new installer options have been introduced:
- install lzo2.dll
- install msvcr90.dll (a requirement from VS2008 builds)
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Added copying of all remaining openvpn dependencies to dist directory so that
the NSI installer script (win/openvpn.nsi) can find and use them more easily.
This includes openvpn.exe, openvpnserv.exe, libpkcs11-helper-1.dll, openssl.exe,
and example files. The associated, external DDL/manifest files are copied also,
so that embedding them with mt.exe is easier. This is a temporary solution until
nmake makefiles are modified to automate this process, except for a few of the
library dependencies (lzo2.dll and libpkcs11-helper-1.dll).
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Made win/build.py call nmake in service-win32 directory to build openvpnserv.exe
after main build (openvpn.exe) has finished.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Python-based buildsystem uses win/config.py to obtain global build parameters
from various sources. Added parsing of the (fake) configure.h and version.m4 to
it so that other Python build files can use them.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Modified win/build_all.py so that by giving -n or --notap switch the TAP driver
is not built. This is useful if using prebuilt TAP drivers, or when WinDDK is
not installed.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
The win/msvc.mak.in file is used as basis for msvc.mak file which drives
openvpn.exe building. This change separates output file from LINK32_FLAGS and
adds helpful comments to the win/msvc.mak.in file.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
The win/show.py tools is used to view build parameters interactively. This
changes it so that it displays parameters parsed from config-win32.h in addition
to those from win/settings.in.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
This change adds several helper functions to win/wb.py:
- config-win32.h parser (to read build configuration options)
- helper function to cd to service-win32 for openvpnserv.exe building
- code to dynamically generate TAP-driver -related variables from version.m4,
required by tap-win32/tapdrv.c
- configure.h generator to allow viewing build options using openvpn --version
- creation of temporary version.m4-based file to allow importing it's variables
to the NSI installer script (win/openvpn.nsi)
- helper function to rename files (used in win/make_dist.py)
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Previously parts of TAP-driver version information were stored in
win/settings.in. This patch moves all of it to version.m4. This patch also
cleans up and adds comments to win/settings.in
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
This change adds a nmake makefile (service-win32/msvc.mak) which allows building
openvpnserv.exe using the new Python-based buildsystem.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
This change adds ENABLE_PASSWORD_SAVE to config-win32.h. This option is also
defined in win/settings.in, but it does not have any effect there.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: James Yonan <james@openvpn.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
NAT on the client side.
Version 2.1.3i.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6944 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1.3h
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6931 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6927 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was only defined for Windows and Linux). This enables OS X to report
the MAC address of the default gateway to the server for ID purposes
when client-side --push-peer-info option is specified.
Also, minor fix to OS X get_default_gateway function:
* include net/route.h directly rather than selectively paste stuff
from it into route.c
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6925 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
MANAGEMENT_DEF_AUTH is not enabled.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6830 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to be notified of tunnel up/down events.
* pulled --ip-win32 options will be suppressed on the client
if --route-nopull option is specified.
Version 2.1.3f
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6813 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
The declaration of SSL_get_current_cipher() has changed to be
return a const value. And this makes compilers a little bit grumpy.
gcc:
ssl.c: In function ‘print_details’:
ssl.c:1918: warning: assignment discards qualifiers from pointer target type
Visual C:
ssl.c (1918): warning C4019: '=' : different 'const' qualifiers
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: Gert Doering <gert@greenie.muc.de>
(cherry picked from commit 7bd3cea4c2f2aa8ed1bf548a3233ae2c3619d47d)
|
|
Version 2.1.3e
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6780 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
execution of Windows net commands.
Version 2.1.3d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6712 e7ae566f-a301-0410-adde-c780ea21d3b5
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
(cherry picked from commit 7621741b480f93411928c66735d2ee9c7f69de3b)
|
|
After some discussion [1] regarding an extension of this feature,
James Yonan wanted this extension to be an opt-in feature. However,
as it does not make sense to opt-in on a extension of a feature which
was discussed, this patch makes the base feature an opt-in instead.
The base feature comes from commit 2e8337de248ef0b5b48cbb2964 (beta2.2)
and commit 935c62be9c0c8a256112 (feat_misc).
[1] http://thread.gmane.org/gmane.network.openvpn.devel/4266
Signed-off-by: David Sommerseth <davids@redhat.com>
Acked-by: James Yonan <james@openvpn.net>
(cherry picked from commit 024972e2ced84c6e5cabc43620ab510e5693d1d4)
|
|
Fixed issue where "signal SIGTERM" entered from the management
interface might get subsequently downgraded to a SIGUSR1.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6716 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
execution of Windows net commands.
Version 2.1.3d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6712 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
instead of "key" in client mode, and allows the client to run
without the need to load the actual private key. When the SSL
protocol needs to perform an RSA sign operation, the data to
be signed will be sent to the management interface via a
notification as follows:
>RSA_SIGN:[BASE64_DATA]
The management interface client should then sign BASE64_DATA
using the private key and return the signature as follows:
rsa-sig
[BASE64_SIG_LINE]
.
.
.
END
This capability is intended to allow the use of arbitrary
cryptographic service providers with OpenVPN via the
management interface.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6708 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
The macros used GCC's pre-C99 syntax, which could not be compiled with
Microsoft Visual Studio 2008.
Note this breaks compatibility with GCC versions before 3.0, which is
deemed safe in a discussion on IRC with David Sommerseth and Samuli
Seppänen on #openvpn-devel (RHEL 3 uses GCC 3.2 already).
Compiled tested on VS2008 by Samuli, on Cygwin GCC 3.4 and GCC 4.3 by myself.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
(cherry picked from commit 9469168e3abb09bd78297208a917ee4d9c025041)
|
|
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
|
|
The new SOCKS auth code in socks.c contained a call to sprintf instead of
openvpn_sprintf. This caused build to fail if MS Visual Studio 2008 C compiler
was used. This change fixes that issue.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Conflicts:
acinclude.m4
config-win32.h
configure.ac
misc.c
thread.c
thread.h
- These conflicts was mainly due to feat_misc getting old
and mostly caused by the pthread clean-up patches in
feat_misc
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
|
|
Modified win/build_all.py so that it parses command-line options using getopt.
Added option "-u / --unsigned" which allows forcing unsigned builds and a "-h /
--help" option. By default a signed build is generated, provided that the Python
SignTool module is installed. If not, the build is interrupted.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: Peter Stuge <peter@stuge.se>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
The add_host_route_if_nonlocal() function is too simple to really
benefit from calling add_bypass_address() when this function is the
only caller to this function.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
The GNU C compiler gave warnings about these functions in the patch
not being used anywhere. Doing a git grep on the code turned out
there were no callers to these functions. Taking these functions out,
as there is not good reason why to carry dead code.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
The GNU C compiler gave warnings about some functions not being used.
These functions where only used if certian #ifdef sections was enabled.
This patch encapsulates these function declarations with matching #ifdef's
to make it more clear when these functions are needed.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
The GNU C compiler warned about a potential issue with an if()
expression missing an extra set of parentheses.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
It has been reported that the Microsoft Visual C compiler complains if
a .c file do not contain any compilable code, which can happen if the
code has been #ifdef'ed out. To avoid this, these #ifdef sections have
a #else section which adds a static dummy() function which does nothing.
On the other hand, the GNU C compiler complains about unused functions when
it discovers this situation.
This patch tries to only add these dummy() functions if the Microsoft Visual C
compiler is detected, via the _MSC_VER macro.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
commit fc1fa9ffc7e3356458ec3 added a new function which needs to have a
stricter string formatting. This was detected due to a compiler warning.
This patch makes sure that the length of username and password is not longer
than 255 bytes. It also adds extra checks to avoid NULL pointer issues with
strlen() on these two parameters.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: Gert Doering <gert@greenie.muc.de>
|
|
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6656 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
not free, since it is allocated by OpenSSL.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6655 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Conflicts:
options.c
- Disagreements about a new included file (forward.h)
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Peter Korsgaard <jacmet@sunsite.dk> reported an issue [1] when compiling
with --disable-crypto activated. He suggested a patch, which only
partly solved the issue. SVN r6568 / commit 3cf9dd88fd84108 added a
new feature which further made it impossible to compile without crypto.
This patch fixes both issues, based on Peter Korsgaard's patch.
[1] <http://sourceforge.net/mailarchive/forum.php?thread_name=87fwx08bod.fsf%40macbook.be.48ers.dk&forum_name=openvpn-devel>
Signed-off-by: James Yonan <james@openvpn.net>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Signed-off-by: Jesse Young <jesse.young@gmail.com>
Acked-by: David Sommerseth <dazo@users.sourceforge.net>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Removed even more function which where practically empty and took away
some function arguments which were not used.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
These code paths was practically not needed with no locking mechanisms
enabled and was just bloating the source code.
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
This code was not activated at all, and hard coded as disabled in syshead.h
with this code snippet:
/*
* Pthread support is currently experimental (and quite unfinished).
*/
#if 1 /* JYFIXME -- if defined, disable pthread */
#undef USE_PTHREAD
#endif
So no matter if --enable-pthread when running ./configure or not, this feature
was never enabled in reality. Further, by removing the blocker code above made
OpenVPN uncompilable in the current state.
As the threading part needs to be completely rewritten and pthreading will not be
supported in OpenVPN 2.x, removing this code seems most reasonable.
In addition, a lot of mutex locking code was also removed, as they were practically
NOP functions, due to pthreading being forcefully disabled
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
Acked-by: James Yonan <james@openvpn.net>
|
|
|
|
The file containing CONFIGURE_DEFINES variable, configure.h, is not present if
openvpn is built using the Python + Visual C -based buildsystem. This causes the
build to fail. This patch adds a check to see if variable exists before trying
to use it.
Signed-off-by: Samuli Seppänen <samuli@openvpn.net>
Acked-by: Peter Stuge <peter@stuge.se>
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
Conflicts:
Makefile.am
openvpn.8
options.c
socket.c
ssl.c
- feat_misc is missing a lot of bugfix2.1 changes
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
|
|
Conflicts:
version.m4
- Reset version.m4 to a more neutral version number
Signed-off-by: David Sommerseth <dazo@users.sourceforge.net>
|
|
|
