Age | Commit message (Collapse) | Author | Files | Lines |
|
verbosity generated by port-share activity.
Version 2.1.3k
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7033 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
reporting client IP origins of proxied connections.
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7031 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
LZO, but that has limited interoperability with LZO-enabled servers.
Modified "push-peer-info" option to push IV_LZO_STUB=1 to server when
client was built with --enable-lzo-stub configure option. This tells
the server that the client lacks LZO capabilities, so the server
should turn off LZO compression for this client via "lzo no".
Added "setenv PUSH_PEER_INFO" option having the same effect as
"push-peer-info".
Version 2.1.3j
git-svn-id: http://svn.openvpn.net/projects/branches/BETA21@7023 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
NAT on the client side.
Version 2.1.3i.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6944 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1.3h
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6931 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6927 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was only defined for Windows and Linux). This enables OS X to report
the MAC address of the default gateway to the server for ID purposes
when client-side --push-peer-info option is specified.
Also, minor fix to OS X get_default_gateway function:
* include net/route.h directly rather than selectively paste stuff
from it into route.c
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6925 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
MANAGEMENT_DEF_AUTH is not enabled.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6830 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to be notified of tunnel up/down events.
* pulled --ip-win32 options will be suppressed on the client
if --route-nopull option is specified.
Version 2.1.3f
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6813 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1.3e
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6780 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Fixed issue where "signal SIGTERM" entered from the management
interface might get subsequently downgraded to a SIGUSR1.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6716 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
execution of Windows net commands.
Version 2.1.3d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6712 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
instead of "key" in client mode, and allows the client to run
without the need to load the actual private key. When the SSL
protocol needs to perform an RSA sign operation, the data to
be signed will be sent to the management interface via a
notification as follows:
>RSA_SIGN:[BASE64_DATA]
The management interface client should then sign BASE64_DATA
using the private key and return the signature as follows:
rsa-sig
[BASE64_SIG_LINE]
.
.
.
END
This capability is intended to allow the use of arbitrary
cryptographic service providers with OpenVPN via the
management interface.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6708 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6656 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
not free, since it is allocated by OpenSSL.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6655 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6585 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
base64.c.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6569 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
where credentials are entered from stdin. This capability is
compiled when ENABLE_CLIENT_CR is defined in syshead.h (enabled
by default).
Challenge/response support was previously implemented for creds
that are queried via the management interface. In this case,
the challenge message will be returned as a custom
client-reason-text string (see management-notes.txt for more
info) on auth failure.
Also, see the comments in misc.c above get_auth_challenge()
for info on the OpenVPN challenge/response protocol.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6568 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
(Gert Doering).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6566 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1.3a
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6424 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
txqueuelen directive is set to 0.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6420 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
rendered as base64.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6412 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
signing drivers and .exe files.
Added win/tap_span.py for building multiple versions of the TAP driver
and tapinstall binaries using different DDK versions to span from Win2K
to Win7 and beyond.
Version 2.1.3
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6404 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Fixed potential local privilege escalation vulnerability in
Windows service. The Windows service did not properly quote the
executable filename passed to CreateService. A local attacker
with write access to the root directory C:\ could create an
executable that would be run with the same privilege level as
the OpenVPN Windows service. However, since non-Administrative
users normally lack write permission on C:\, this vulnerability
is generally not exploitable except on older versions of Windows
(such as Win2K) where the default permissions on C:\ would allow
any user to create files there.
Credit: Scott Laurie, MWR InfoSecurity
Version 2.1.2
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6400 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6384 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
in "make dist" tarball.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6382 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
of existing --register-dns commands.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6352 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
TLS control channel (such as AUTH_FAILED) that occur during
or immediately after a TLS renegotiation might be dropped.
Version 2.1.1n
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6350 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6347 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
win/build_all.py except that it doesn't build the
TAP drivers or tapinstall.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6306 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Fixed some issues on Windows with --log, subprocess creation
for command execution, and stdout/stderr redirection.
Version 2.1.1m.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6304 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
commands.
When only a single IP address is desired from a multi-address DNS
expansion, use the first address rather than a random selection.
Version 2.1.1l
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6291 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6285 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
core dump if http-proxy-fallback-disable command was issued in
response to ">PROXY:NEED_NOW management" interface notification.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6284 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
# Build debugging version of openvpn.exe
!define PRODUCT_OPENVPN_DEBUG
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@6283 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
for HTTP Proxy Basic Authentication would go into an infinite
retry-fail loop instead of requerying the management interface for
new creds.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5701 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1.1i
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5668 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
easier for OpenVPN client UIs to start a pre-existing client config file with
proxy options, or to adaptively fall back to a proxy connection if a direct
connection fails.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5652 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* use strcasecmp instead of stricmp
* define HASH and HASHHEX as unsigned char to avoid compiler
warnings
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5629 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Improved the ability of http-auth "auto" flag to dynamically detect
the auth method required by the proxy.
Added http-auth "auto-nct" flag to reject weak proxy auth methods.
Added HTTP proxy digest authentication method.
Removed extraneous openvpn_sleep calls from proxy.c.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5628 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was not being compiled in.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5620 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5599 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
win directory.
Fixed minor issue in TAP driver DEBUG builds where
non-null-terminated unicode strings were being
printed incorrectly.
Version 2.1.1g
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5577 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Don't delete config-win32.h, because this is now a true source file
and no longer a generated file.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5558 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* Added env-filter MI command to perform filtering on env vars
passed through as a part of --management-client-auth
* man_write will now try to aggregate output into larger blocks
(up to 1024 bytes) for more efficient i/o
Version 2.1.1f
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5557 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
python msvc\config.py
nmake /f msvc\msvc.mak
Version 2.1.1e
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5516 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
socket is created rather than waiting until after connect/listen.
Version 2.1.1d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5514 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Enable exponential backoff in reliability layer
retransmits.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5490 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
notification to include a client reason string:
>PASSWORD:Verification Failed: 'AUTH_TYPE' ['REASON_STRING']
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5468 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5467 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5466 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
so that the server-side value would take precedence,
the auth_deferred_expire_window function would incorrectly
return a window period of 0 seconds. In this case, the
correct window period should be the handshake window
period.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5464 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
a process hang with 100% CPU utilization in --management-client
mode if the management interface client disconnected at the
point where credentials are queried.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5458 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5371 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5370 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to the client when a bad password is given for mid-session reauth.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5369 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
init.c prior to daemon exit to ensure that the tun/tap interface is
closed and any added routes are deleted.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5367 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
RPM distribution) where it was referencing a non-existent
subdirectory in the tarball, causing it to fail (patch from
David Sommerseth).
Version 2.1.1.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5269 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* Updated ChangeLog.
* Note in man page that clients connecting to a --multihome server
should always use the --nobind option.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5266 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5265 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5264 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
1. Fail gracefully rather than segfault if calloc returns NULL.
2. The openvpn_plugin_abort_v1 function can potentially be called
with handle == NULL. Add code to detect this case, and if
so, avoid dereferencing pointers derived from handle.
(Thanks to David Sommerseth for finding this bug).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5261 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5169 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
or "dhcp-renew" options were combined with "route-gateway dhcp".
The problem is that the IP Helper functions for DHCP release and
renew are blocking, and so calling them from a single-threaded
client stops tunnel traffic forwarding, and hence breaks
"route-gateway dhcp" which requires an active tunnel. The fix is
to call the IP Helper functions for DHCP release and renew from
another process.
Version 2.1_rc21b.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5164 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
make it a hard failure, rather than just a warning.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5159 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5152 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5106 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
renegotiations -- this is similer to how the common name is also
locked.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5105 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
implied, so new usage is:
./doval [openvpn parms]
instead of:
./doval ./openvpn [openvpn parms]
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5104 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
renegotiations -- this is similer to how the common name is also
locked.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5098 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
that cannot directly be used as a config file. The directive
will simply cause OpenVPN to exit with an error if a generic
config file is used.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5077 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
included in the .tar.gz file built by make dist.
Re-released as Version 2.1_rc20
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5058 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5023 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
now send a RESTART message to client.
This feature is intended to make UDP clients respond the same as TCP
clients in the case where the server issues a RESTART message in
order to force the client to reconnect and pull a new options/route
list.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5021 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
log file.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5020 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
when an AUTH_FAILED message is returned to the client. This
string can be set by the server-side managment interface and read
by the client-side management interface.
For more info, see management/management-notes.txt, and look for
references to "client-reason-text".
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5012 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
redirect-gateway option by itself, without any extra parameters,
would cause the option to be ignored.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5011 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
servers to connect to in a round-robin fashion, spend no more than
n seconds waiting for a response before trying the next server.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5010 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to clients, including routes. Previously, all pushed options needed
to fit within a 1024 byte options string.
Remember that to make use of this feature to allow many routes to
be pushed to clients, the client config file must specify the
max-routes option, and the number of pushed routes cannot exceed
this limit. Also, both server and client must include this commit.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4991 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
file or pulled from a server) can now be configured via the new
"max-routes" directive.
Previously, the limit was set to 100 and fixed by a compile-time
constant. Now the limit is dynamic and can be modified by the
"max-routes" directive. If max-routes is not specified, the default
limit is 100.
Note that this change does not address the maximum size of the
pushed options string sent from server to client, which is still
controlled by the TLS_CHANNEL_BUF_SIZE compile-time constant.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4967 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
after connection initiation rather than 0 seconds after.
Successive PUSH_REQUEST messages after the first will continue to be
sent at 5 second intervals until a response is received. This tends
to speed up the client connection sequence by 4 seconds because the
first PUSH_REQUEST message is usually sent too soon and is dropped,
causing a wait of 5 seconds until the next PUSH_REQUEST message is
sent.
Version 2.1_rc19d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4965 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4946 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
(Sebastien Raveau).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4932 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
--disable-def-auth Disable deferred authentication
--disable-pf Disable internal packet filter
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4852 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
in route.c to make it easier to spot them.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4851 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
server load statistics.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4844 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4843 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4837 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4836 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4712 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
use a DPC (deferred procedure call) to defer packet injection until
IRQL < DISPATCH_LEVEL, rather than calling NdisMEthIndicateReceive
in the context of AdapterTransmit. This is an attempt to reduce kernel
stack usage, and prevent EXCEPTION_DOUBLE_FAULT BSODs that have been
observed on Vista. Updated TAP driver version number to 9.6.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4606 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
building for multiple architectures causes the previous tapdrvr.cod to
be overwritten.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4604 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
with <autoconf-2.60.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4539 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4526 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
does not build on Windows on non-MINGW32.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4525 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4501 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4500 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4477 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
set correctly when the 'local' option is specifed.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4476 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
functionality (Alon Bar-Lev).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4475 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
client will examine the routing table and determine whether (a) the
OpenVPN server is reachable via a locally connected interface, or (b)
traffic to the server must be forwarded through the default router.
Only add a special bypass route for the OpenVPN server if (b) is true.
If (a) is true, behave as if the 'local' flag is specified, and do not
add a bypass route.
The new 'autolocal' flag depends on the non-portable test_local_addr()
function in route.c, which is currently only implemented for Windows.
The 'autolocal' flag will act as a no-op on platforms that have not
yet defined a test_local_addr() function.
Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for
more option content to be pushed from server to client).
Raised D_MULTI_DROPPED debug level to 4 from 3.
Version 2.1_rc16b.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4446 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to be pushed to the client in such a way that they don't accidently
obscure critical local addresses such as the DHCP server address and
DNS server addresses.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4436 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Windows, where sending a set of several commands to the
management interface in quick succession might cause the
latter commands in the set to be ignored.
Increased management interface input command buffer size
from 256 to 1024 bytes.
Minor tweaks to Windows build system.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4414 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
commands are echoed from 7 to 3. Passwords will be filtered.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4413 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4363 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
and to use the Server 2008 WDK (6001.18002).
In cryptoapi.c, renamed CryptAcquireCertificatePrivateKey to
OpenVPNCryptAcquireCertificatePrivateKey to work around
a symbol conflict in MinGW-5.1.4.exe.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4318 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
that result in the termination of the daemon will be written
to stderr.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4131 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
with unix domain sockets.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4128 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
from stdin, when "stdin" is given as the config
file name.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4127 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
if SIGNTOOL is defined, even if EXTRACT_FILES is enabled.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3976 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
compilers.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3903 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3902 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3901 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3900 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3899 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Windows installer changes:
* ifdefed out the check Windows version code which is causing
problems on Windows 7
* don't define SF_SELECTED if it is already defined
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3855 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
if EXTRACT_FILES is defined in settings.in.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3791 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
In management interface, added new ">CLIENT:ESTABLISHED" notification.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3763 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
key was specified as an inline file.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3743 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3729 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to management interface client when management-client-auth
is enabled.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3718 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
display the current number of authenticated clients
connected to the server.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3717 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3620 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Changed Windows installer to use LZMA instead of BZIP2 compression.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3616 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
process ID of the current OpenVPN process (Angelo Laub).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3552 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to inhibit the pushing of the route-gateway parameter to
clients.
Miscellaneous man page edits, fixed some formatting issues.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3550 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3525 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
segfault when a --plugin module is used.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3524 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
flag on the server as well as pushes it to connecting clients.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3513 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3507 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
server-only option and should therefore generate an
error when used on the client.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3506 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
with options that are incompatible with those of the server
will be disconnected.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3505 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
number generator) parameters. In previous OpenVPN
versions, the PRNG was hardcoded to use the SHA1
hash. Now any OpenSSL hash may be used. This is
part of an effort to remove hardcoded references to
a specific cipher or cryptographic hash algorithm.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3503 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3496 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
backward compatibility with system() call semantics used in OpenVPN
2.1_rc8 and earlier. To preserve backward compatibility use:
script-security 3 system
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3495 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Version 2.1_rc13b
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3494 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3477 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
config file syntax checking to allow directives for future OpenVPN
versions to be ignored.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3476 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
of KEY_NAME environmental variable parameter to openssl.cnf
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3472 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
it from being combined with --server directive.
Now, for example, we can configure thusly:
server 10.8.0.0 255.255.255.0 nopool
ifconfig-pool 10.8.0.2 10.8.0.99 255.255.255.0
to have ifconfig-pool manage only a subset
of the VPN subnet.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3471 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
--status-version 3.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3468 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
and username strings to include any printable character including
space, but excluding control characters such as tab, newline, and
carriage-return.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3467 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
except tabs are used as delimiters instead of commas.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3466 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
the Common Name convention from the cert/key filename
convention.
For example:
KEY_CN="James's Laptop" KEY_NAME="james" ./pkitool james
will crete a client certificate/key pair of james.crt/james.key
having a Common Name of "James's Laptop" and a Name of "james".
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3463 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
X509_{n}_{subject_field}.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3462 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
connections by clients that do not specify a username/password, when a
user-defined authentication script/module is in place (via
--auth-user-pass-verify, --management-client-auth, or a plugin module).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3461 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
set the KEY_NAME environmental variable to set the "name"
X509 subject field in generated certificates.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3460 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
X509_{cert_depth}_{name}={value}
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3459 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
deferred authentication.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3457 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to work when OpenVPN is running as a server.
Documented Management Interface "bytecount" command in
management/management-notes.txt.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3452 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
file) and SAMPCONF_DH (Diffie-Helman parameters) to Windows
build system, and may be defined in settings.in.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3450 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
input files to gen, so that gen can be disconnected from
the rest of the source tree and makensis openvpn.nsi will
still function correctly.
Added additional SAMPCONF_(CA|CRT|KEY) macros to settings.in
(commented out by default).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3439 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
or higher being required to execute user-defined scripts or
executables.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3436 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
with the goal of fixing a build issue on Fedora 9 that was
introduced in 2.1_rc13.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3434 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Minor fixes to Windows build scripts.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3417 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Telethra to OpenVPN Technologies.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3409 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
domain socket, for example:
management /tmp/openvpn unix
Also added management-client-user and management-client-group
directives to control which processes are allowed to connect
to the socket.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3396 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3349 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
was incorrectly expecting the lladdr parameter to be an IP address
when it is actually a MAC address (HoverHell).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3339 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
part of the tarball (Matthias Andree).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3332 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Fixed a bug that can cause SSL/TLS negotiations in UDP mode
to fail if UDP packets are dropped.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3330 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3323 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3318 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
deferred authentication features in 2.1_rc8.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3316 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
to more closely conform to RFC 3696:
* DNS name length must not exceed 255 characters
* DNS name characters must be limited to alphanumeric,
dash ('-'), and dot ('.')
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3312 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
arguments since all scripts were called by system().
The security hardening changes made to 2.1_rc9 no longer
use system(), but rather use the safer execve or CreateProcess
system calls. The security hardening also introduced a
backward incompatibility with 2.1_rc8 and earlier in that
script parameters were no longer shell-expanded, so
for example:
client-connect "docc CLIENT-CONNECT"
would fail to work because execve would try to execute
a script called "docc CLIENT-CONNECT" instead of "docc"
with "CLIENT-CONNECT" as the first argument.
This patch fixes the issue, bringing the script argument
semantics back to pre 2.1_rc9 behavior in order to preserve
backward compatibility while still using execve or CreateProcess
to execute the script/executable.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3311 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
from server (rather than only IP address) for --ifconfig, --route, and
--route-gateway. OpenVPN versions 2.1_rc7 and earlier allowed DNS names
for these options to be pulled and translated to IP addresses by default.
Now --allow-pull-fqdn will be explicitly required on the client to enable
DNS-name-to-IP-address translation of pulled options.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3307 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3222 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
the packet rather than trigger a fatal assertion.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3221 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
the new implementation of extract_x509_field_ssl depends on.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3220 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
Fixed separate compile errors in options.c and ntlm.c that occur
on strict C compilers (such as old versions of gcc) that require
that C variable declarations occur at the start of a {} block,
not in the middle.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3219 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3218 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
--script-security rules. Also adds retrying if the addresses are in
use (Matthias Andree).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3217 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
for Windows stdcall functions in configure.ac (Alon Bar-Lev).
Minor fix to cryptoapi.c to not compile itself unless USE_CRYPTO
and USE_SSL flags are enabled (Alon Bar-Lev).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3183 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
HAVE_GETSOCKOPT, and HAVE_POLL are undefined even though
the underlying functions are present.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3181 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* Warn when ethernet bridging that the IP address of the
bridge adapter is probably not the same address that
the LAN adapter was set to previously.
* When running as a server, warn if the LAN network address is
the all-popular 192.168.[0|1].x, since this condition commonly
leads to subnet conflicts down the road.
* Primarily on the client, check for subnet conflicts between
the local LAN and the VPN subnet.
Added a 'netmask' parameter to get_default_gateway, to return
the netmask of the adapter containing the default gateway.
Only implemented on Windows so far. Other platforms will
return 255.255.255.0. Currently the netmask information is
only used to warn about subnet conflicts.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3179 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
on Windows. If the bypass IP address is 0.0.0.0 or 255.255.255.255,
ignore it.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3177 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
DHCP proxy mode: Configure server mode for ethernet
bridging using a DHCP-proxy, where clients talk to the
OpenVPN server-side DHCP server to receive their IP address
allocation and DNS server addresses.
Added "--route-gateway dhcp", to enable the extraction
of the gateway address from a DHCP negotiation with the
OpenVPN server-side LAN.
Modified client.conf and server.conf to reflect new option
modes.
Incremented version to 2.1_rc9a.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3164 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3155 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
observed instabilities in the dynamic build since the migration to
OpenSSL 0.9.8h.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3149 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3147 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* --tls-remote -- some people misunderstand the semantics
* --script-security -- warn if script-security will allow user-defined
scripts to be called, and also warn separately if passwords may be
passed to scripts via the environment
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3129 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3128 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3127 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
by client from server. Fixes --iproute vulnerability.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3126 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3125 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
* All external programs and scripts are now called by execve() on unix and
CreateProcess on Windows.
* The system() function is no longer used.
* Argument lists for external programs and scripts are now built by the new
argv_printf function which natively outputs to string arrays (i.e.
char *argv[] lists), never truncates its output, and eliminates the security
issues inherent in formatting and parsing command lines, and dealing with
argument quoting.
* The --script-security directive has been added to offer policy controls on
OpenVPN's execution of external programs and scripts.
Also added a new plugin example (openvpn/plugin/examples/log.c) that logs
information to stdout for every plugin method called by OpenVPN.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3122 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
up argv strings for execve without the possibility of truncation
or misinterpretation of mid-argument spacing.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3107 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
due to overflow.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3085 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
success/error, and any truncation of output due to an insufficiently
large output buffer will be cause for error.
In verify_callback, read X509 Subject Name without truncation.
In verify_callback, rather than silently truncating Common Name at
64 bytes, throw an error if Common Name is larger than 64 bytes.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3084 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
before calling user-defined scripts, to preclude the chance of a leading
dash being interpreted as an option prefix.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3083 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
an absolute pathname.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3082 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
likely() and unlikely() macro additions to syshead.h) and r3061.
I would like to give more thought to the bigger issue of fortifying
buffer.[ch] through the use of additional defensive programming techniques.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3081 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
used in the config file parser.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3078 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
output truncation or failure of write() to write the
expected number of bytes.
Raised STATUS_PRINTF_MAXLEN to 512 (from 256).
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3077 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
filename at 256 bytes.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3076 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
defined(P2MP_SERVER) rather than P2MP_SERVER.
Fixed compile issues when USE_CRYPTO is undefined.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3075 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
filenames.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3074 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
password if the verbosity was set to a high debug level
such as 7 or higher. Normally this would only be used by
developers. Now, even at high debug levels, the password
will not be output.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3073 e7ae566f-a301-0410-adde-c780ea21d3b5
|
|
device names such as CON, NUL, LPT1, etc.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3072 e7ae566f-a301-0410-adde-c780ea21d3b5
|