Monero::AddressBookImpl Invalid destination address 不正な宛先アドレス Payment ID supplied: this is obsolete Monero::PendingTransactionImpl Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: ファイルは既に存在するのでファイルに取引を書き出せなかった。上書きしないにエグジットしてます。ファイル： Failed to write transaction(s) to file 取引をファイルに書き込めませんでした daemon is busy. Please try again later. デーモンは忙しいです。後でもう一度試してください。 no connection to daemon. Please make sure daemon is running. デーモンの接続が確立ありません。デーモンが実行中になっていることを確認してください。 transaction %s was rejected by daemon with status: 取引 %s がデーモンによって拒否しました。ステータス： . Reason: 。 理由： Unknown exception: 未知の例外： Unhandled exception 未処理の例外 Couldn't multisig sign data: Couldn't sign multisig transaction: Monero::UnsignedTransactionImpl This is a watch only wallet これは閲覧専用ウォレットです Failed to sign transaction 取引を署名できませんでした Claimed change does not go to a paid address 請求したお釣りはもうお金に送ったアドレス送りません Claimed change is larger than payment to the change address 請求したお釣りはお釣りのアドレスに送ったペイメントより大きいです Change goes to more than one address お釣りは複数のアドレスに送ります sending %s to %s %s を %s に送ってます with no destinations 目的地なし %s change to %s %s のお釣り %s に no change お釣りありません Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s 取引は %lu ロードした、 %s に、%s のの手数料、 %s 、 %s 、最小リングサイズ %lu 。%s Monero::WalletImpl daemon is busy. Please try again later. デーモンは忙しいです。後でもう一度試してください。 no connection to daemon. Please make sure daemon is running. デーモンの接続が確立ありません。デーモンが実行中になっていることを確認してください。 RPC error: RPCエラー： not enough outputs for specified ring size 指定したリングサイズのアウトプットが不十分です found outputs to use 使うためにアウトプットを見つかれました Please sweep unmixable outputs. ミックス不能なアウトプットをスイープしてください。 not enough money to transfer, available only %s, sent amount %s 振替でMoneroを受け取ることできません。利用可能な金額： %s, 取引の金額： %s failed to parse address アドレスの解析に失敗しました failed to parse secret spend key 秘密なスペンドキーの解析に失敗しました failed to parse secret view key 秘密なビューキーの解析に失敗しました failed to verify secret spend key 秘密なスペンドキーの検証に失敗しました spend key does not match address スペンドキーがアドレスと一致しませんでした failed to verify secret view key 秘密なビューキーの検証に失敗しました view key does not match address ビューキーがアドレスと一致しませんでした failed to generate new wallet: 新しいウォレットの生成に失敗しました： Failed to send import wallet request インポートウォレットリクエストの送信に失敗しました Failed to load unsigned transactions 未署名の取引を読み込めませんでした Failed to load transaction from file ファイルからの取引のロードに失敗しました Wallet is view only 閲覧専用ウォレットです failed to save file ファイルを保存できませんでした Key images can only be imported with a trusted daemon 信頼できるデーモンしかでキーイメージをインポートしません Failed to import key images: キーイメージをインポートできませんでした： Failed to get subaddress label: サブアドレスラベルを取得できませんでした： Failed to set subaddress label: サブアドレスラベルをセットできませんでした： Neither view key nor spend key supplied, cancelled Electrum seed is empty Electrum-style word list failed verification Electrumな単語表の検証に失敗しました Failed to get multisig info: Failed to make multisig: Failed to finalize multisig wallet creation Failed to finalize multisig wallet creation: Failed to export multisig images: Failed to parse imported multisig images Failed to import multisig images: Failed to check for partial multisig key images: Failed to restore multisig transaction: Sending all requires one destination address Destinations and amounts are unequal payment id has invalid format, expected 64 character hex string: Invalid destination address 不正な宛先アドレス a single transaction cannot use more than one payment id failed to set up payment id, though it was decoded correctly failed to get outputs to mix: %s not enough money to transfer, overall balance only %s, sent amount %s 振替でMoneroを受け取ることできません。利用可能な金額： %s, 取引の金額： %s not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) 取引は無理です。利用可能な金額 %s、 取引の金額 %s = %s + %s (手数料) output amount アウトプットの金額 transaction was not constructed 取引を作りませんでした transaction %s was rejected by daemon with status: 取引 %s がデーモンによって拒否しました。ステータス： one of destinations is zero 宛先の1つはゼロです failed to find a suitable way to split transactions 取引を分割する適切な方法を見つけることができませんでした unknown transfer error: 不明な転送エラー： internal error: 内部エラー： unexpected error: 予期せぬエラー： unknown error 不明なエラー failed to get outputs to mix Failed to parse txid txidの解析に失敗しました no tx keys found for this txid このtxidのためにtxキーを見つかれませんでした Failed to parse tx key txキーの解析に失敗しました Failed to parse address アドレスの解析に失敗しました Address must not be a subaddress アドレスはサブアドレスであってはならないです The wallet must be in multisig ready state Given string is not a key Rescan spent can only be used with a trusted daemon 信頼できるデーモンしかで再スキャンしません Invalid output: Failed to mark outputs as spent Failed to parse output amount Failed to parse output offset Failed to mark output as spent Failed to mark output as unspent Failed to parse key image Failed to get ring Failed to get rings Failed to set ring Wallet Failed to parse address アドレスの解析に失敗しました Failed to parse key キーの解析に失敗しました failed to verify key キーの検証に失敗しました key does not match address キーがアドレスと一致しませんでした command_line yes はい no いいえ cryptonote::rpc_args Specify IPv4 address to bind RPC server RPCサーバに接続するIPを指定してください Specify IPv6 address to bind RPC server Allow IPv6 for RPC Ignore unsuccessful IPv4 bind for RPC Specify username[:password] required for RPC server RPCサーバを使うためにユーザー名[：パスワード]を指定してください Confirm rpc-bind-ipv4-address value is NOT a loopback (local) IP rpc-bind-ipv4-addressの価はループバック(ローカル)IPじゃないことを確認してください Specify a comma separated list of origins to allow cross origin resource sharing クロスオリジンリソース共同をできるためにコンマ区切りリストを指定してください Enable SSL on RPC connections: enabled|disabled|autodetect Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). List of certificate fingerprints to allow Allow user (via --rpc-ssl-certificates) chain certificates Allow any peer certificate Invalid IPv4 address given for -- このRPCサーバーのIPはだめです -- permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- は暗号化されていない外部接続をできますがSSHトンネルやSSLプロキシの方がいいです。これでオーバーライド -- Username specified with -- このRPCサーバのユーザー名につて -- cannot be empty 入力する必要があります requires RPC server password -- のRPCサーバのパスワードありません -- cryptonote::simple_wallet Commands: failed to read wallet password invalid password 不正なパスワード set seed: needs an argument. available options: language set: unrecognized argument(s) wallet file path not valid: Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. needs an argument 0 or 1 ０や１ unsigned integer 符号無しの整数 --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file specify a recovery parameter with the --electrum-seed="words list here" specify a wallet path with --generate-new-wallet (not --wallet-file) wallet failed to connect to daemon: Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. List of available languages for your wallet's seed: You had been using a deprecated version of the wallet. Please use the new seed that we provide. Generated new wallet: failed to generate new wallet: 新しいウォレットの生成に失敗しました： Opened watch-only wallet Opened wallet You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. failed to load wallet: ウォレットをロードできませんでした： Use the "help" command to see the list of available commands. Wallet data saved Mining started in daemon mining has NOT been started: Mining stopped in daemon mining has NOT been stopped: Blockchain saved Height spent Starting refresh... Refresh done, blocks received: payment id has invalid format, expected 16 or 64 character hex string: ペイメントIDのフォーマットは不正です。16文字または64文字の16進数の文字列が必要で： bad locked_blocks parameter: a single transaction cannot use more than one payment id: failed to set up payment id, though it was decoded correctly ring size %u is too large, maximum is %u payment id failed to encode failed to parse short payment ID from URI Invalid last argument: a single transaction cannot use more than one payment id failed to parse payment id, though it was detected transaction cancelled. Failed to check for backlog: Transaction 取引 Spending from address index %d WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. Sending %s. Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s The transaction fee is %s , of which %s is dust from change . 。 A total of %s from dust change will be sent to dust address Unsigned transaction(s) successfully written to MMS Failed to write transaction(s) to file 取引をファイルに書き込めませんでした Unsigned transaction(s) successfully written to file: Failed to cold sign transaction with HW wallet No unmixable outputs found Not enough money in unlocked balance No address given missing lockedblocks parameter bad locked_blocks parameter Failed to parse number of outputs Amount of outputs should be greater than 0 failed to parse Payment ID failed to parse key image キーイメージの解析に失敗しました No outputs found Multiple transactions are created, which is not supposed to happen The transaction uses multiple or no inputs, which is not supposed to happen missing threshold amount invalid amount threshold Claimed change does not go to a paid address 請求したお釣りはもうお金に送ったアドレス送りません Claimed change is larger than payment to the change address 請求したお釣りはお釣りのアドレスに送ったペイメントより大きいです sending %s to %s %s を %s に送ってます dummy output(s) with no destinations 目的地なし This is a multisig wallet, it can only sign with sign_multisig Failed to sign transaction 取引を署名できませんでした Failed to sign transaction: 取引を署名できませんでした： Transaction raw hex data exported to Failed to load transaction from file ファイルからの取引のロードに失敗しました RPC error: RPCエラー： wallet is watch-only and has no spend key Your original password was incorrect. Error with wallet rewrite: invalid unit 不正なユニット invalid count: must be an unsigned integer invalid value 不正な金額 bad m_restore_height parameter: Restore height is: Daemon is local, assuming trusted デーモンはローカルです。信頼できるデーモン予期してます Password for new watch-only wallet internal error: 内部エラー： unexpected error: 予期せぬエラー： unknown error 不明なエラー refresh failed: Blocks received: unlocked balance: ロック解除された残高： amount 金額 false Unknown command: 未知のコマンド： Command usage: コマンドの使用： Command description: コマンドの記述： wallet is multisig but not yet finalized Failed to retrieve seed wallet is multisig and has no seed Error: failed to estimate backlog array size: Error: bad estimated backlog array size (current) %u block (%u minutes) backlog at priority %u%s %u to %u block (%u to %u minutes) backlog at priority %u No backlog at priority This wallet is already multisig wallet is watch-only and cannot be made multisig This wallet has been used before, please use a new wallet to create a multisig wallet Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants Invalid threshold Another step is needed Error creating multisig: Error creating multisig: new wallet is not multisig multisig address: マルチサインアドレス： This wallet is not multisig これはマルチシッグウォレットではありません This wallet is already finalized Failed to finalize multisig Failed to finalize multisig: Multisig address: This multisig wallet is not yet finalized Error exporting multisig info: Multisig info exported to Multisig info imported Failed to import multisig info: Failed to update spent status after importing multisig info: Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" This is not a multisig wallet これはマルチシッグウォレットではありません Failed to sign multisig transaction Multisig error: マルチサインエラー： Failed to sign multisig transaction: It may be relayed to the network with submit_multisig Failed to load multisig transaction from file Multisig transaction signed by only %u signers, needs %u more signatures Transaction successfully submitted, transaction You can check its status by using the `show_transfers` command. Failed to export multisig transaction to file Saved exported multisig transaction file(s): Invalid key image or txid failed to unset ring usage: %s <key_image>|<pubkey> Frozen: Not frozen: bytes sent bytes received Welcome to Monero, the private cryptocurrency. Monero, like Bitcoin, is a cryptocurrency. That is, it is digital money. Monero protects your privacy on the blockchain, and while Monero strives to improve all the time, no privacy technology can be 100% perfect, Monero included. Monero cannot protect you from malware, and it may not be as effective as we hope against powerful adversaries. Flaws in Monero may be discovered in the future, and attacks may be developed to peek under some of the layers of privacy Monero provides. Be safe and practice defense in depth. ring size must be an integer >= could not change default ring size Invalid height Invalid amount invalid argument: must be either 1/yes or 0/no Start mining in the daemon (bg_mining and ignore_battery are optional booleans). Stop mining in the daemon. Set another daemon to connect to. Save the current blockchain data. Synchronize the transactions and balance. Show the wallet's balance of the currently selected account. Show the incoming transfers, all or filtered by availability and address index. Output format: Amount, Spent("T"|"F"), "frozen"|"locked"|"unlocked", RingCT, Global Index, Transaction Hash, Address Index, [Public Key, Key Image] Show the payments for the given payment IDs. Show the blockchain height. Send all unmixable outputs to yourself with ring_size 1 Send all unlocked outputs below the threshold to an address. Send a single output of the given key image to an address without change. Donate <amount> to the development team (donate.getmonero.org). Submit a signed transaction from a file. Change the current log detail (level must be <0-4>). If no arguments are specified, the wallet shows all the existing accounts along with their balances. If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). If the "switch" argument is specified, the wallet switches to the account specified by <index>. If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the wallet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID Print all entries in the address book, optionally adding/deleting an entry to/from it. Save the wallet data. Save a watch-only keys file. Display the private view key. Display the private spend key. Display the Electrum-style mnemonic seed Display the encrypted Electrum-style mnemonic seed. Rescan the blockchain for spent outputs. Get the transaction key (r) for a given <txid>. Check the amount going to <address> in <txid>. Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. Generate a signature proving that you own at least this much, optionally with a challenge string <message>. If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. Show the unspent outputs of a specified address within an optional amount range. Rescan the blockchain from scratch. If "hard" is specified, you will lose any information which can not be recovered from the blockchain itself. Set an arbitrary string note for a <txid>. Get a string note for a txid. Set an arbitrary description for the wallet. Get the description of the wallet. Show the wallet's status. Show the wallet's information. Sign the contents of a file. Verify a signature on the contents of a file. Import a signed key images list and verify their spent status. Export a set of outputs owned by this wallet. Import a set of outputs owned by this wallet. Show information about a transfer to/from this address. Change the wallet's password. Print the information about the current fee and transaction backlog. Export data needed to create a multisig wallet Turn this wallet into a multisig wallet Turn this wallet into a multisig wallet, extra step for N-1/N wallets Export multisig info for other participants Import multisig info from other participants Sign a multisig transaction from a file Submit a signed multisig transaction from a file Export a signed multisig transaction to a file Unsets the ring used for a given key image or transaction Freeze a single output by key image so it will not be used Thaw a single output by key image so it may be used again Checks whether a given output is currently frozen by key image Prints simple network stats Prints basic info about Monero for first time users Show the help section or the documentation about a <command>. integer >= block height 1/yes or 0/no No wallet found with that name. Confirm creation of new wallet named: can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file specify a recovery parameter with the --electrum-seed="multisig seed here" Multisig seed failed verification This address is a subaddress which cannot be used here. Error: expected M/N, but got: エラー： N/Mを欲しかったでもこれを貰いました： Error: expected N > 1 and N <= M, but got: エラー： N ＞ 1 と N ＜＝ M のこと欲しかったでもこれを貰いました： Error: M/N is currently unsupported. Generating master wallet from %u of %u multisig wallet keys failed to parse secret view key 秘密なビューキーの解析に失敗しました failed to verify secret view key 秘密なビューキーの検証に失敗しました Error: M/N is currently unsupported Restore height If you are new to Monero, type "welcome" for a brief overview. Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. Enter the number corresponding to the language of your choice Error creating wallet: Your wallet has been generated! To start synchronizing with the daemon, use the "refresh" command. Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. Always use the "exit" command when closing monero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). failed to generate new mutlisig wallet 新しいマルチシッグウォレットの生成に失敗しました Generated new %u/%u multisig wallet: Opened %u/%u multisig wallet%s Use "help <command>" to see a command's documentation. wallet is multisig and cannot save a watch-only version Failed to query mining status: Failed to setup background mining: Background mining enabled. Thank you for supporting the Monero network. Background mining not enabled. Run "set setup-background-mining 1" to change. Using an untrusted daemon, skipping background mining check The daemon is not set up to background mine. Enabling this supports the network you are using, and makes you eligible for receiving new monero Background mining not enabled. Set setup-background-mining to 1 to change. Unexpected array length - Exited simple_wallet::set_daemon() This does not seem to be a valid daemon URL. txid txid idx idx NOTE: This transaction is locked, see details with: show_transfer New transfer received since rescan was started. Key images are incomplete. payment required. (Some owned outputs have partial key images - import_multisig_info needed) Currently selected account: [ ] ] Tag: タグ： (No tag assigned) Balance per address: Address アドレス Balance 残高 Unlocked balance ロック解除された残高 Outputs アウトプット Label ラベル %8u %6s %21s %21s %7u %21s spent global index tx id tx id addr index Used at heights: [frozen] No incoming transfers No incoming available transfers No incoming unavailable transfers payment ペイメント transaction 取引 height unlock time No payments with id failed to get blockchain height: Transaction %llu/%llu: txid=%s failed to get output: output key's originating block height shouldn't be higher than the blockchain height Originating block heights: | | | | Warning: Some input keys being spent are from , which can break the anonymity of ring signature. Make sure this is intentional! Transaction spends more than one very old output. Privacy would be better if they were sent separately. Spend them now anyway? Ring size must not be 0 ring size %u is too small, minimum is %u wrong number of arguments No outputs found, or daemon is not ready . This transaction (including %s change) will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) Failed to parse donation address: Donating %s %s to The Monero Project (donate.getmonero.org or %s). Donating %s %s to %s. failed to parse tx_key Tx key successfully stored. Failed to store tx key: block usage: show_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] usage: export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<path>] direction timestamp running balance hash payment ID fee destination index note CSV exported to Warning: this will lose any information which can not be recovered from the blockchain. This includes destination addresses, tx secret keys, tx notes, etc Warning: your restore height is higher than wallet restore height: Rescan anyway ? (Y/Yes/N/No): MMS received new message Daemon requests payment at diff %llu, with %f credits/hash%s. Run start_mining_for_rpc to start mining to pay for RPC access, or use another daemon Error mining to daemon: Failed to start mining for RPC payment <index> is out of bounds Network type: Testnet Stagenet Mainnet command only supported by HW wallet hw wallet does not support cold KI sync Please confirm the key image sync on the device Key images synchronized to height Running untrusted daemon, cannot determine which transaction output is spent. Use a trusted daemon with --trusted-daemon and run rescan_spent spent, unspent Failed to import key images Failed to import key images: キーイメージをインポートできませんでした： Failed to reconnect device Failed to reconnect device: Transaction successfully saved to , txid 、txid Failed to save transaction to This is a watch only wallet これは閲覧専用ウォレットです Double spend seen on the network: this transaction may or may not end up being mined Transaction ID not found true failed to parse refresh type command not supported by HW wallet wallet is watch-only and has no seed wallet is non-deterministic and has no seed Enter optional seed offset passphrase, empty to see raw seed Incorrect password Current fee is %s %s per %s Send this multisig info to all other participants, then use exchange_multisig_keys <info1> [<info2>...] with others' multisig info Multisig wallet has been successfully created. Current wallet type: Failed to perform multisig keys exchange: Failed to load multisig transaction from MMS Invalid key image Invalid txid Key image either not spent, or spent with mixin 0 Failed to get key image ring: File doesn't exist Invalid ring specification: Invalid key image: Invalid ring type, expected relative or abosolute: Error reading line: Invalid ring: Invalid relative ring: Invalid absolute ring: Failed to set ring for key image: Continuing. Missing absolute or relative keyword invalid index: must be a strictly positive unsigned integer invalid index: indices wrap invalid index: indices should be in strictly ascending order failed to set ring First line is not an amount Invalid output: Bad argument: should be "add" Failed to open file Invalid output key, and file doesn't exist Failed to mark output spent: Invalid output Failed to mark output unspent: Spent: Not spent: Failed to check whether output is spent: Failed to save known rings: Unlike Bitcoin, your Monero transactions and balance stay private and are not visible to the world by default. However, you have the option of making those available to select parties if you choose to. Welcome to Monero and financial privacy. For more information see https://GetMonero.org Unknown command '%s', try 'help' Please confirm the transaction on the device wallet is watch-only and cannot transfer WARNING: this is a non default ring size, which may harm your privacy. Default is recommended. WARNING: from v8, ring size will be fixed and this setting will be ignored. Payment required, see the 'rpc_payment_info' command RPC client ID: RPC client secret key: Failed to query daemon Using daemon: Payments required for node use, current credits: Credits target: Credits spent this session: Credit discrepancy this session: Difficulty: credits per hash found, credits/hash Mining for payment at %.1f H/s Estimated time till %u credits target mined: %s Mining for payment Not mining No payment needed for node use No known public nodes address last_seen never Error retrieving public node list: Daemon does not require payment for RPC access Starting mining for RPC access: diff %llu, %f credits/hash%s Run stop_mining_for_rpc to stop priority must be either 0, 1, 2, 3, or 4, or one of: could not change default priority invalid argument: must be either 0/never, 1/action, or 2/encrypt/decrypt Invalid target Inactivity lock timeout disabled on Windows Invalid number of seconds Device name not specified Device reconnect failed Device reconnect failed: Export format not specified Export format not recognized. Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Send all unlocked balance to an address and lock it for <lockblocks> (max. 1000000). If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. <priority> is the priority of the sweep. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. If the parameter "outputs=<N>" is specified and N > 0, wallet splits the transaction into N even outputs. Sign a transaction from a file. If the parameter "export_raw" is specified, transaction raw hex data suitable for the daemon RPC /sendrawtransaction is exported. Display the restore height Available options: seed language Set the wallet's seed language. always-confirm-transfers <1|0> Whether to confirm unsplit txes. print-ring-members <1|0> Whether to print detailed information about ring members during confirmation. store-tx-info <1|0> Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. default-ring-size <n> Set the default ring size (obsolete). auto-refresh <1|0> Whether to automatically synchronize new blocks from the daemon. refresh-type <full|optimize-coinbase|no-coinbase|default> Set the wallet's refresh behaviour. priority [0|1|2|3|4] Set the fee to default/unimportant/normal/elevated/priority. confirm-missing-payment-id <1|0> (obsolete) ask-password <0|1|2 (or never|action|decrypt)> action: ask the password before many actions such as transfer, etc decrypt: same as action, but keeps the spend key encrypted in memory when not needed unit <monero|millinero|micronero|nanonero|piconero> Set the default monero (sub-)unit. min-outputs-count [n] Try to keep at least that many outputs of value at least min-outputs-value. min-outputs-value [n] Try to keep at least min-outputs-count outputs of at least that value. merge-destinations <1|0> Whether to merge multiple payments to the same destination address. confirm-backlog <1|0> Whether to warn if there is transaction backlog. confirm-backlog-threshold [n] Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. confirm-export-overwrite <1|0> Whether to warn if the file to be exported already exists. refresh-from-block-height [n] Set the height before which to ignore blocks. auto-low-priority <1|0> Whether to automatically use the low priority fee level when it's safe to do so. segregate-pre-fork-outputs <1|0> Set this if you intend to spend outputs on both Monero AND a key reusing fork. key-reuse-mitigation2 <1|0> Set this if you are not sure whether you will spend on a key reusing Monero fork later. subaddress-lookahead <major>:<minor> Set the lookahead sizes for the subaddress hash table. segregation-height <n> Set to the height of a key reusing fork you want to use, 0 to use default. ignore-fractional-outputs <1|0> Whether to ignore fractional outputs that result in net loss when spending due to fee. ignore-outputs-above <amount> Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter. ignore-outputs-below <amount> Ignore outputs of amount below this threshold when spending. track-uses <1|0> Whether to keep track of owned outputs uses. setup-background-mining <1|0> Whether to enable background mining. Set this to support the network and to get a chance to receive new monero. device-name <device_name[:device_spec]> Device name for hardware wallet. export-format <"binary"|"ascii"> Save all exported files as binary (cannot be copied and pasted) or ascii (can be). persistent-client-id <1|0> Whether to keep using the same client id for RPC payment over wallet restarts. auto-mine-for-rpc-payment-threshold <float> Whether to automatically start mining for RPC payment if the daemon requires it. credits-target <unsigned int> The RPC payment credits balance to target (0 for default). Set the transaction key (r) for a given <txid> in case the tx was made by some other device or 3rd party wallet. Show the incoming/outgoing transfers within an optional height range. Output format: In or Coinbase: Block Number, "block"|"in", Time, Amount, Transaction Hash, Payment ID, Subaddress Index, "-", Note Out: Block Number, "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Destinations, Input addresses**, "-", Note Pool: "pool", "in", Time, Amount, Transaction Hash, Payment Id, Subaddress Index, "-", Note, Double Spend Note Pending or Failed: "failed"|"pending", "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Input addresses**, "-", Note * Excluding change and fee. ** Set of address indices used as inputs in this transfer. export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<filepath>] Export to CSV the incoming/outgoing transfers within an optional height range. Export a signed set of key images to a <filename>. Synchronizes key images with the hw wallet. Attempts to reconnect HW wallet. Generate a new random full size payment id (obsolete). These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. Performs extra multisig keys exchange rounds. Needed for arbitrary M/N multisig wallets Interface with the MMS (Multisig Messaging System) <subcommand> is one of: init, info, signer, list, next, sync, transfer, delete, send, receive, export, note, show, set, help send_signer_config, start_auto_config, stop_auto_config, auto_config Get help about a subcommand with: help mms <subcommand>, or mms help <subcommand> Initialize and configure the MMS for M/N = number of required signers/number of authorized signers multisig Display current MMS configuration Set or modify authorized signer info (single-word label, transport address, Monero address), or list all signers List all messages Evaluate the next possible multisig-related action(s) according to wallet state, and execute or offer for choice By using 'sync' processing of waiting messages with multisig sync info can be forced regardless of wallet state Force generation of multisig sync info regardless of wallet state, to recover from special situations like "stale data" errors Initiate transfer with MMS support; arguments identical to normal 'transfer' command arguments, for info see there Delete a single message by giving its id, or delete all messages by using 'all' Send a single message by giving its id, or send all waiting messages Check right away for new messages to receive Write the content of a message to a file "mms_message_content" Send a one-line message to an authorized signer, identified by its label, or show any waiting unread notes Show detailed info about a single message Available options: auto-send <1|0> Whether to automatically send newly generated messages right away. Send completed signer config to all other authorized signers Start auto-config at the auto-config manager's wallet by issuing auto-config tokens and optionally set others' labels Delete any auto-config tokens and abort a auto-config process Start auto-config by using the token received from the auto-config manager Print the ring(s) used to spend a given key image or transaction (if the ring size is > 1) Output format: Key Image, "absolute", list of rings Set the ring used for a given key image, so it can be reused in a fork Save known rings to the shared rings database Mark output(s) as spent so they never get selected as fake outputs in a ring Marks an output as unspent so it may get selected as a fake output in a ring Checks whether an output is marked as spent Lock the wallet console, requiring the wallet password to continue Lists known public nodes Returns version information Get info about RPC payments to current node Start mining to pay for RPC access Stop mining to pay for RPC access full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) 0, 1, 2, 3, or 4, or one of 0|1|2 (or never|action|decrypt) monero, millinero, micronero, nanonero, piconero <major>:<minor> unsigned integer (seconds, 0 to disable) <device_name[:device_spec]> "binary" or "ascii" floating point >= 0 wrong number range, use: %s Wallet name not valid. Please try again or use Ctrl-C to quit. Wallet and key files found, loading... Key file found but not wallet file. Regenerating... Key file not found. Failed to open wallet: Generating new wallet... 新しいウォレットを生じてます... NOTE: the following %s can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. string 25 words Can't specify more than one of --testnet and --stagenet can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name", --generate-from-json="jsonfilename" and --generate-from-device="wallet_name" Electrum-style word list failed verification Electrumな単語表の検証に失敗しました Enter seed offset passphrase, empty if none No data supplied, cancelled データをもらいませんでしたのでキャンセルしました failed to parse address アドレスの解析に失敗しました failed to parse view key secret key 秘密なビューキーの解析に失敗しました failed to verify view key secret key 秘密なビューキーの検証に失敗しました view key does not match standard address ビューキーが一般的なアドレスと一致しませんでした account creation failed failed to parse spend key secret key 秘密なスペンドキーの解析に失敗しました failed to verify spend key secret key 秘密なスペンドキーの検証に失敗しました spend key does not match standard address スペンドキーが一般的なアドレスと一致しませんでした Secret spend key (%u of %u) No restore height is specified. Assumed you are creating a new account, restore will be done from current estimated blockchain height. account creation aborted can't specify --subaddress-lookahead and --wallet-file at the same time failed to open account wallet is null RPC client secret key should be 32 byte in hex format Warning: using an untrusted daemon at %s Using a third party daemon can be detrimental to your security and privacy Using your own without SSL exposes your RPC traffic to monitoring You are strongly encouraged to connect to the Monero network using your own daemon If you or someone you trust are operating this daemon, you can use --trusted-daemon Moreover, a daemon is also less secure when running in bootstrap mode Failed to initialize ring database: privacy enhancing features will be inactive If your display freezes, exit blind with ^C, then run again with --use-english-language-names invalid language choice entered. Please try again. View key: ビューキー： Generated new wallet on hw device: Key file not found. Failed to open wallet You may want to remove the file "%s" and try again failed to deinitialize wallet Watch only wallet saved as: Failed to save watch only wallet: With background mining enabled, the daemon will mine when idle and not on battery. this command requires a trusted daemon. Enable with --trusted-daemon Error checking daemon RPC access prices Error checking daemon RPC access prices: Expected trusted or untrusted, got Failed to connect to daemon trusted untrusted Daemon RPC credits/hash is less than was claimed. Either this daemon is cheating, or it changed its setup recently. Claimed: Actual: blockchain can't be saved: NOTE: this transaction uses an encrypted payment ID: consider using subaddresses instead WARNING: this transaction uses an unencrypted payment ID: these are obsolete and ignored. Use subaddresses instead. Password needed (%s) - use the refresh command Enter password Device requires attention Enter device PIN Failed to read device PIN Please enter the device passphrase on the device Enter device passphrase Failed to read device passphrase The first refresh has finished for the HW-based wallet with received money. hw_key_images_sync is needed. Do you want to do it now? (Y/Yes/N/No): hw_key_images_sync skipped. Run command manually before a transfer. daemon is busy. Please try again later. デーモンは忙しいです。後でもう一度試してください。 no connection to daemon. Please make sure daemon is running. デーモンの接続が確立ありません。デーモンが実行中になっていることを確認してください。 refresh error: (Some owned outputs have missing key images - import_key_images needed) Balance: 残高： Invalid keyword: pubkey key image キーイメージ unlocked ringct ringct T T F F locked RingCT RingCT - - payment ID has invalid format, expected 16 or 64 character hex string: failed to get spent status failed to find construction data for tx input Input %llu/%llu (%s): amount=%s the same transaction 同じ取引 blocks that are temporally very close I locked your Monero wallet to protect you while you were away Locked due to inactivity. The wallet password is required to unlock the console. Locked blocks too high, max 1000000 (˜4 yrs) Is this okay anyway? There is currently a %u block backlog at that fee level. Is this okay? Sweeping %s in %llu transactions for a total fee of %s. Is this okay? Sweeping %s for a total fee of %s. Is this okay? Discarding %s of unmixable outputs that cannot be spent, which can be undone by "rescan_spent". Is this okay? Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? Rescan anyway? locked due to inactivity (Y/Yes/N/No): Choose processing: Sign tx Send the tx for submission to Send the tx for signing to Submit tx unknown Choice: Wrong choice Id I/O Authorized Signer Message Type Height R Message State Since ago # Transport Address Auto-Config Token Monero Address <not set> Message In/out: State: %s since %s, %s ago Sent: Never Sent: %s, %s ago Authorized signer: Content size: bytes Content: (binary data) Send these messages now? Queued for sending. Invalid message id usage: mms init <required_signers>/<authorized_signers> <own_label> <own_transport_address> The MMS is already initialized. Re-initialize by deleting all signer info and messages? Error in the number of required signers and/or authorized signers The MMS is not active. Invalid signer number mms signer [<number> <label> [<transport_address> [<monero_address>]]] Invalid Monero address Wallet state does not allow changing Monero addresses anymore Usage: mms list Usage: mms next [sync] No next step: prepare_multisig make_multisig exchange_multisig_keys export_multisig_info import_multisig_info sign_multisig submit_multisig Send tx Process signer config Replace current signer config with the one displayed above? Process auto config data Nothing ready to process Usage: mms sync Usage: mms delete (<message_id> | all) Delete all messages? Usage: mms send [<message_id>] Usage: mms receive Usage: mms export <message_id> Message content saved to: Failed to to save message content Usage: mms note [<label> <text>] No signer found with label Usage: mms show <message_id> Usage: mms set <option_name> [<option_value>] Wrong option value Auto-send is on Auto-send is off Unknown option Usage: mms help [<subcommand>] Usage: mms send_signer_config Signer config not yet complete Usage: mms start_auto_config [<label> <label> ...] There are signers without a label set. Complete labels before auto-config or specify them as parameters here. Auto-config is already running. Cancel and restart? Usage: mms stop_auto_config Delete any auto-config tokens and stop auto-config? Usage: mms auto_config <auto_config_token> Invalid auto-config token Auto-config already running. Cancel and restart? MMS not available in this wallet The MMS is not active. Activate using the "mms init" command Invalid MMS subcommand Error in MMS command: Good signature Bad signature Standard address: failed to parse payment ID or address failed to parse index Address book is empty. Index: インデックス： Address: アドレス： Description: 記述： wallet is watch-only and cannot sign failed to read file ファイルの読み込みに失敗しました Use --restore-height or --restore-date if you want to restore an already setup account from a specific height. Is this okay? Still apply restore height? failed to load signature file wallet is watch-only and cannot generate the proof The reserve proof can be generated only by a full wallet Address must not be a subaddress アドレスはサブアドレスであってはならないです Good signature -- total: %s, spent: %s, unspent: %s [Double spend seen on the network: this transaction may or may not end up being mined] There is no unspent output in the specified address (no daemon) (デーモンありません） (out of sync) (Untitled account) failed to parse index: インデックスの解析に失敗しました： specify an index between 0 and Grand total: Balance: , unlocked balance: 、ロック解除された残高： Untagged accounts: Tag %s is unregistered. タグ %s を登録してません。 Accounts with tag: タグを持ってるアカウント： Tag's description: タグの記述： Account %c%8u %6s %21s %21s %21s %c%8u %6s %21s %21s %21s ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- %15s %21s %21s %15s %21s %21s Primary address プライマリアドレス (used) (Untitled address) <index_min> is already out of bound <index_max> exceeds the bound Integrated addresses can only be created for account 0 Integrated address: %s, payment ID: %s Subaddress: サブアドレス： no description found 記述を見つかれませんでした description found: 記述を見つかれました： Filename: ファイル名： Watch only 閲覧専用 %u/%u multisig%s %u/%u マルチサイン%s Normal ノーマル Type: タイプ： This wallet is multisig and cannot sign Bad signature from Good signature from wallet is watch-only and cannot export key images failed to save file ファイルを保存できませんでした Signed key images exported to Outputs exported to amount is wrong: expected number from 0 to Sweeping Money successfully sent, transaction: Change goes to more than one address お釣りは複数のアドレスに送ります %s change to %s %s のお釣り %s に no change お釣りありません Transaction successfully signed to file failed to parse txid txidの解析に失敗しました Tx key: txキー： no tx keys found for this txid このtxidのためにtxキーを見つかれませんでした signature file saved to: failed to save signature file failed to parse tx key txキーの解析に失敗しました error: エラー： received 貰いました in txid txidに received nothing in txid WARNING: this transaction is not yet included in the blockchain! This transaction has %u confirmations WARNING: failed to determine number of confirmations! bad min_height parameter: bad max_height parameter: in <min_amount> should be smaller than <max_amount> Amount: 金額： , number of keys: 、キーの数： Min block height: Max block height: Min amount found: Max amount found: Total count: Bin size: Outputs per *: count ^ | | + + +--> block height +--> ブロック高 ^ ^ ^ ^ wallet ウォレット Random payment ID: ランダムなペイメントID： Matching integrated address: gencert Filename to save the certificate Filename to save the private key Passphrase with which to encrypt the private key File containing the passphrase with which to encrypt the private key Prompt for a passphrase with which to encrypt the private key Argument is needed: Failed to read passphrase Failed to create certificate Failed to write certificate: Failed to write private key: Failed to save certificate file Failed to save private key file genms Base filename (-1, -2, etc suffixes will be appended as needed) ベースファイル名（必要があれば－１、－２、とかのサフィックスを追加します） Give threshold and participants at once as M/N M/Nってのフォーマットで同じ時に閾値と参加者をください How many participants will share parts of the multisig wallet マルチサインウォレットを分ける人はいくついますか How many signers are required to sign a valid transaction 有効な取引を署名するために必要な人いくついますか Create testnet multisig wallets テストネットのマルチサインウォレットを作る Create stagenet multisig wallets Create an address file for new wallets Generating %u %u/%u multisig wallets %u %u/%u マルチサインウォレットを生じてます Failed to verify multisig info Error verifying multisig extra info マルチサインの追加情報を検証中にエラーありました Generated multisig wallets for address アドレスのためにマルチサインウォレットを生じなかった Error creating multisig wallets: マルチサインウォレットを樹立中にエラーありました： This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other このプログラムはマルチサインウォレットのセットを生じます　－　みんながみんなを信用する場合にだけこの単純なスキームを使ってください Error: Can't specify more than one of --testnet and --stagenet Error: expected N/M, but got: エラー： N/Mを欲しかったでもこれを貰いました： Error: either --scheme or both of --threshold and --participants may be given エラー： --scheme あるいは--threshold と --participants を上げられる Error: expected N > 1 and N <= M, but got N==%u and M==%d エラー： N ＞ 1 と N ＜＝ M のこと欲しかったでも N＝＝%u と M＝＝%d を貰いました Error: --filename-base is required エラー： --filename-baseを使う必要だがあります mms::message_store Use PyBitmessage instance at URL <arg> Specify <arg> as username:password for PyBitmessage API Auto-config cannot proceed because auto config data from other signers is not complete The signer config is not complete. Wallet can't go multisig because key sets from other signers are missing or not complete. Wallet can't start another key exchange round because key sets from other signers are missing or not complete. Syncing not done because multisig sync data from other signers are missing or not complete. There are waiting messages, but nothing is ready to process under normal circumstances Use "mms next sync" if you want to force processing of the waiting sync data Use "mms note" to display the waiting notes There are no messages waiting to be processed. key set additional key set multisig sync data partially signed tx fully signed tx note signer config auto-config data unknown message type in out unknown message direction ready to send sent waiting processed cancelled unknown message state sw Generate new wallet and save it to <arg> 新しいウォレットを生じろ <arg> をこっちにセーブしてください Generate new wallet from device and save it to <arg> Generate incoming-only wallet from view key ビューキーで閲覧専用ウォレットを生じろください Generate deterministic wallet from spend key スペンドキーで決定論的なウォレットを生じろください Generate wallet from private keys 秘密なキーでウォレットを生じろください Generate a master wallet from multisig wallet keys マルチシガーウォレットキーでマスターウォレットを生じろください Language for mnemonic ニーモニックのための言語 Specify Electrum seed for wallet recovery/creation ウォレットの回収や作成のためにElectrumなニーモニックシードを指定してください Recover wallet using Electrum-style mnemonic seed Electrumなニーモニックシードでウォレットを復元してください alias for --restore-deterministic-wallet Recover multisig wallet using Electrum-style mnemonic seed Electrumなニーモニックシードでマルチシガーウォレットを復元してください Generate non-deterministic view and spend keys 非決定論的のビューとスペンドキーを生じろください Restore from estimated blockchain height on specified date invalid argument: must be either 0/1, true/false, y/n, yes/no DNSSEC validation passed WARNING: DNSSEC validation was unsuccessful, this address may not be correct! For URL: Monero Address = you have cancelled the transfer request failed to parse index: インデックスの解析に失敗しました： invalid format for subaddress lookahead; must be <major>:<minor> no connection to daemon. Please make sure daemon is running. デーモンの接続が確立ありません。デーモンが実行中になっていることを確認してください。 RPC error: RPCエラー： failed to get random outputs to mix: Not enough money in unlocked balance Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees not enough outputs for specified ring size 指定したリングサイズのアウトプットが不十分です output amount アウトプットの金額 found outputs to use 使うためにアウトプットを見つかれました Please use sweep_unmixable. transaction was not constructed 取引を作りませんでした Reason: one of destinations is zero 宛先の1つはゼロです failed to find a suitable way to split transactions 取引を分割する適切な方法を見つけることができませんでした unknown transfer error: 不明な転送エラー： Multisig error: マルチサインエラー： internal error: 内部エラー： unexpected error: 予期せぬエラー： There was an error, which could mean the node may be trying to get you to retry creating a transaction, and zero in on which outputs you own. Or it could be a bona fide error. It may be prudent to disconnect from this node, and not try to send a transaction immediately. Alternatively, connect to another node so the original node cannot correlate information. File %s likely stores wallet private keys! Use a different file name. seconds minutes hours days months a long time This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. WARNING: Do not reuse your Monero keys on another fork, UNLESS this fork has key reuse mitigations built in. Doing so will harm your privacy. Unknown command: 未知のコマンド： Allow communicating with a daemon that uses a different RPC version 別のRPCバージョンを使用してるデーモンとの通信を許可してください Restore from specific blockchain height 特定ブロックチェイン高で復元してください The newly created transaction will not be relayed to the monero network 新しい取引をネットワークに中継しません Create an address file for new wallets Display English language names failed to read wallet password Enter a new password for the wallet Wallet password daemon is busy. Please try again later. デーモンは忙しいです。後でもう一度試してください。 possibly lost connection to daemon デモンの接続が切れましたかもしりません Error: エラー： Is this OK? transaction %s was rejected by daemon File %s already exists. Are you sure to overwrite it? Failed to initialize wallet ウォレットを初期化できませんでした tools::wallet2 Use daemon instance at <host>:<port> <host>:<port>でデーモンインスタンスを使ってください Use daemon instance at host <arg> instead of localhost localhostの代わりにホスト <arg>でデーモンインスタンスを使ってください Wallet password file ウォレットのパスワードファイル Use daemon instance at port <arg> instead of 18081 １８０８１の代わりにポート <arg>でデーモンインスタンスを使ってください For testnet. Daemon must also be launched with --testnet flag テストネットのためにデーモンは --testnet のフラグで開始する必要があります can't specify daemon host or port more than once デーモンのホストやポートを複数回指定することはできません can't specify more than one of --password and --password-file --password と --passwordfile を1つしか指定しません the password file specified could not be read 指定されたパスワードファイルを読み取れません Failed to load file ファイルのロードに失敗しました Wallet password (escape/quote as needed) ウォレットのパスワード(随時にエスケープ文字を使ってください) [<ip>:]<port> socks proxy to use for daemon connections Enable commands which rely on a trusted daemon 必要な信用できるデーモンのコマンドをエネーブルしてください Disable commands which rely on a trusted daemon Specify username[:password] for daemon RPC client デーモンのRPCクライアントを使うためにユーザー名[：パスワード]を指定してください Enable SSL on daemon RPC connections: enabled|disabled|autodetect List of valid fingerprints of allowed RPC servers Allow any SSL certificate from the daemon Allow user (via --daemon-ssl-ca-certificates) chain certificates For stagenet. Daemon must also be launched with --stagenet flag Set shared ring database path Number of rounds for the key derivation function HW device to use HW device wallet derivation path (e.g., SLIP-10) Do not use DNS Do not connect to a daemon, nor use DNS File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, wihch typically means more than 256 bits of data) Invalid argument for Enabling -- requires -- or -- or use of a .onion/.i2p domain --trusted-daemon and --untrusted-daemon are both seen, assuming untrusted Daemon is local, assuming trusted デーモンはローカルです。信頼できるデーモン予期してます no password specified; use --prompt-for-password to prompt for a password パスワードを指定しませんでした。パスワードプロンプトを見るために--prompt-for-password を使ってください Enter a new password for the wallet Wallet password Failed to parse JSON JSONを解析に失敗しました Version %u too new, we can only grok up to %u バージョン %u 新しすぎるです。%u までグロークできます failed to parse view key secret key 秘密なビューキーの解析に失敗しました failed to verify view key secret key 秘密なビューキーの検証に失敗しました failed to parse spend key secret key 秘密なスペンドキーの解析に失敗しました failed to verify spend key secret key 秘密なスペンドキーの検証に失敗しました Electrum-style word list failed verification Electrumな単語表の検証に失敗しました At least one of either an Electrum-style word list, private view key, or private spend key must be specified Both Electrum-style word list and private key(s) specified Electrumな単語表と秘密なキーを指定しました invalid address 不正なアドレス view key does not match standard address ビューキーが一般的なアドレスと一致しませんでした spend key does not match standard address スペンドキーが一般的なアドレスと一致しませんでした Cannot generate deprecated wallets from JSON JSONで非推奨のウォレットを生成することはできません failed to parse address: アドレスの解析に失敗しました： Address must be specified in order to create watch-only wallet 閲覧専用ウォレットを作るためにアドレスを指定する必要があります failed to generate new wallet: 新しいウォレットの生成に失敗しました： Password is needed to compute key image for incoming monero Invalid password: password is needed to compute key image for incoming monero Primary account プライマリア カウント No funds received in this tx. この取引から資金貰いませんでした。 failed to read file ファイルの読み込みに失敗しました Set subaddress lookahead sizes to <major>:<minor> Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). tools::wallet_rpc_server Failed to create directory ディレクトリの作成に失敗しました Failed to create directory %s: %s %s %s ディレクトリの作成に失敗しました Cannot specify -- これを指定しません： -- and -- と -- Failed to create file ファイルの作成に失敗しました . Check permissions or remove file 。 パーミッションを確認するか、ファイルを削除してください Error writing to file ファイルへの書き込みエラー RPC username/password is stored in file RPCユーザー名/パスワードはファイルに保存しました Tag %s is unregistered. タグ %s を登録してません。 Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) 取引は無理です。利用可能な金額 %s、 取引の金額 %s = %s + %s (手数料) This is the RPC monero wallet. It needs to connect to a monero daemon to work correctly. これはMoneroのRPCウォレットです。正しく動作させるには Moneroデーモンに接続する必要があります。 Can't specify more than one of --wallet-file and --generate-from-json --wallet-file と --generate-from-json を1つしか指定しません Can't specify more than one of --testnet and --stagenet Must specify --wallet-file or --generate-from-json or --wallet-dir --wallet-file や --generate-from-json や --wallet-dir を指定する必要があります Loading wallet... ウォレットをロードしてます... Saving wallet... ウォレットを保存してます... Successfully saved 保存しました Successfully loaded ロードしました Wallet initialization failed: ウォレットを初期化できませんでした: Failed to initialize wallet RPC server ウォレットのRPCサーバを初期化できませんでした Starting wallet RPC server ウォレットのRPCサーバを開始してます Failed to run wallet: ウォレットを起動することできませんでした： Stopped wallet RPC server ウォレットのRPCサーバを停止しました Failed to save wallet: ウォレットを保存することできませんでした： wallet_args Wallet options ウォレットのオプション Generate wallet from JSON format file JSONフォーマットファイルでウォレットを生じてください Use wallet <arg> ウォレットの <arg> を使てください Set RPC client secret key for RPC payments Max number of threads to use for a parallel job 並列ジョブのために最大スレッドの数 Specify log file ログファイルを指定してください Config file 設定ファイル General options ジェネラルオプション This is the command line monero wallet. It needs to connect to a monero daemon to work correctly. これはMoneroのコマンドラインウォレットです。正しく動作させるには Moneroデーモンに接続する必要があります。 Can't find config file 設定ファイルを見つかりませんでした Logging to: こっちにログをしてます: Logging to %s %s にログをしてます WARNING: You may not have a high enough lockable memory limit see ulimit -l Usage: 使用：