From 145d0b78efaaa6032b17141d50a9f28633a18f66 Mon Sep 17 00:00:00 2001 From: NanoAkron Date: Fri, 28 Oct 2016 14:51:35 +0100 Subject: Add instructions to README.md for building on the Raspberry Pi 2 --- README.md | 50 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-) (limited to 'README.md') diff --git a/README.md b/README.md index 2245e6920..36f78711c 100644 --- a/README.md +++ b/README.md @@ -145,7 +145,11 @@ invokes cmake commands as needed. this to be worthwhile, the machine should have one core and about 2GB of RAM available per thread. -* The resulting executables can be found in `build/release/bin`. +* The resulting executables can be found in `build/release/bin` + +* Add `PATH="$PATH:$HOME/monero/build/release/bin"` to `.profile` + +* Run Monero with `monerod --detach` * **Optional**: build and run the test suite to verify the binaries: @@ -165,6 +169,50 @@ invokes cmake commands as needed. HAVE_DOT=YES doxygen Doxyfile +#### On the Raspberry Pi + +Tested on a Raspberry Pi 2 with a clean install of minimal Debian Jessie from https://www.raspberrypi.org/downloads/raspbian/ + +* `apt-get update` and `apt-get upgrade` to install all of the latest software + +* Install the dependencies for Monero except libunwind and libboost-all-dev + +* Increase the system swap size + + sudo /etc/init.d/dphys-swapfile stop + sudo nano /etc/dphys-swapfile + CONF_SWAPSIZE=1024 + sudo /etc/init.d/dphys-swapfile start + +* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*` to remove a previous version if you're not using a clean install) + + cd + wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.bz2 + tar xvfo boost_1_62_0.tar.bz2 + cd boost_1_62_0 + ./bootstrap.sh + sudo ./b2 + +* Wait ~8 hours + + sudo ./bjam install + +* Wait ~4 hours + +* Change to the root of the source code directory and build: + + cd monero + make release + +* Wait ~4 hours + +* The resulting executables can be found in `build/release/bin` + +* Add `PATH="$PATH:$HOME/monero/build/release/bin"` to `.profile` + +* Run Monero with `monerod --detach` + +* You may wish to reduce the size of the swap file after the build has finished, and delete the boost directory from your home directory #### On Windows: -- cgit v1.2.3