| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
6ee9f1260 fuzz_tests: fix build error in signature fuzz test (moneromooo-monero)
|
|
|
|
|
|
4e44306 enable CLSAG support for Trezor client (ph4r05)
|
|
d20ff4f64 functional_tests: add a large (many randomx epochs) p2p reorg test (moneromooo-monero)
6a0b3b1f8 functional_tests: add randomx tests (moneromooo-monero)
9d42649d5 core: fix mining from a block that's not the current top (moneromooo-monero)
|
|
|
|
6a37da8 threadpool: guard against exceptions in jobs, and armour plating (moneromooo-monero)
|
|
Those would, if uncaught, exit run and leave the waiter to wait
indefinitely for the number of active jobs to reach 0
|
|
|
|
|
|
v13 enforces claiming the full block reward, so we need to keep
track of tx fees to add them to the coinbase
|
|
|
|
b641e0a2c Add clear method to byte_stream (Lee Clagett)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
They are allowed from v12, and MLSAGs are rejected from v13.
|
|
|
|
|
|
844fb4e94 enforce claiming maximum coinbase amount (moneromooo-monero)
|
|
7175dcb10 replace most boost serialization with existing monero serialization (moneromooo-monero)
|
|
839e1f4ba functional_tests: add p2p functional tests (moneromooo-monero)
|
|
Tests tx/block propagation and reorgs
|
|
Claiming a slightly lesser amount does not yield the size gains
that were seen pre rct, so this closes a fingerprinting vector
|
|
|
|
This reverts commit 921dd8dde5d381052d0aa2936304a3541a230c55.
|
|
This reduces the attack surface for data that can come from
malicious sources (exported output and key images, multisig
transactions...) since the monero serialization is already
exposed to the outside, and the boost lib we were using had
a few known crashers.
For interoperability, a new load-deprecated-formats wallet
setting is added (off by default). This allows loading boost
format data if there is no alternative. It will likely go
at some point, along with the ability to load those.
Notably, the peer lists file still uses the boost serialization
code, as the data it stores is define in epee, while the new
serialization code is in monero, and migrating it was fairly
hairy. Since this file is local and not obtained from anyone
else, the marginal risk is minimal, but it could be migrated
later if needed.
Some tests and tools also do, this will stay as is for now.
|
|
85efc88c1 Fix overflow issue in epee:misc_utils::rolling_median_t and median(), with unit test (koe)
|
|
76c16822d wallet2_api: implement runtime proxy configuration (xiphon)
|
|
4e2377995 Change ZMQ-JSON txextra to hex and remove unnecessary base fields (Lee Clagett)
|
|
98c151ecb Optimize ZMQ-JSON vector reading; GetBlocksFast reads 24%+ faster (Lee Clagett)
60627c9f2 Switch to insitu parsing for ZMQ-JSON; GetBlocksFast reads 13%+ faster (Lee Clagett)
fe96e66eb Fix pruned tx for ZMQ's GetBlocksFast (Lee Clagett)
|
|
6f5411d30 tests: fix missing error on missing python entry point (moneromooo-monero)
c6dc2850c python-rpc: add missing sync_txpool python entry point (moneromooo-monero)
|
|
921dd8dde Use domain-separated ChaCha20 for in-memory key encryption (Sarang Noether)
|
|
a11ec4ac1 Support for supercop ASM in wallet, and benchmark for supercop (Lee Clagett)
|
|
6bfcd3101 Updates InProofV1, OutProofV1, and ReserveProofV1 to new V2 variants that include all public proof parameters in Schnorr challenges, along with hash function domain separators. Includes new randomized unit tests. (Sarang Noether)
|
|
|
|
|
|
|
|
include all public proof parameters in Schnorr challenges, along with hash function domain separators. Includes new randomized unit tests.
|
|
67ade8005 Add randomized delay when forwarding txes from i2p/tor -> ipv4/6 (Lee Clagett)
|
|
unit test
|
|
|
|
8656a8c9f remove double includes (sumogr)
|
|
5ef0607da Update copyright year to 2020 (SomaticFanatic)
|
|
db8563cb performance_tests: some windows fixes (moneromooo-monero)
|
|
6e4a55b rpc: fix relay_tx error return mixup (moneromooo-monero)
9b86e14 functional_tests: add simple relay_tx test (moneromooo-monero)
|
|
15538f7 ByteSlice: Fix persisting ptr to std::moved SSO buffer (Doy-lee)
|
|
bde7f1c fuzz_tests: fix init check in oss-fuzz mode (moneromooo-monero)
c4b7420 Do not use PIE with OSS-Fuzz (moneromooo-monero)
c4df8b1 fix leaks in fuzz tests (moneromooo-monero)
38ca1bb fuzz_tests: add a tx extra fuzz test (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
29e563b Fixed bugs for take_slice and byte_stream->byte_slice (vtnerd)
|
|
|
|
|
|
81773f5 fuzz_tests: refactor and add OSS-Fuzz compatibility (moneromooo-monero)
cb4edc1 cmake: ASAN and PIE don't mix (moneromooo-monero)
|
|
|
|
The Bug:
1. Construct `byte_slice.portion_` with `epee::span(buffer)` which copies a pointer to the SSO buffer to `byte_slice.portion_`
2. It constructs `byte_slice.storage_` with `std::move(buffer)` (normally this swap pointers, but SSO means a memcpy and clear on the original SSO buffer)
3. `slice.data()` returns a pointer from `slice.portion_` that points to the original SSO cleared buffer, `slice.storage_` has the actual string.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Update copyright year to 2020
|
|
afe5a55 Revert functional test changes in babf25d and 5715460 (vtnerd)
|
|
|
|
Too many iterations cause std::bad_alloc for the timings vector,
and the micro prefix displays as some other character, so use u.
Reported by iDunk
|
|
|
|
5715460 Always reject duplicate key-images from second txid (vtnerd)
babf25d Allow unrestricted rpc calls to get full txpool info (vtnerd)
|
|
7326b69 functional_tests: ensure signatures never reuse a timestamp (moneromooo-monero)
082dd2c functional_tests: ensure signed timestamps are fresh (moneromooo-monero)
|
|
f9441c5 Fixed string_ref usage bug in epee::from_hex::vector (vtnerd)
|
|
87d7558 Allow wallet2.h to run in WebAssembly (woodser)
|
|
- Add abstract_http_client.h which http_client.h extends.
- Replace simple_http_client with abstract_http_client in wallet2,
message_store, message_transporter, and node_rpc_proxy.
- Import and export wallet data in wallet2.
- Use #if defined __EMSCRIPTEN__ directives to skip incompatible code.
|
|
|
|
4ed60b6 Bulletproofs: verification speedup (SarangNoether)
|
|
f8b1480 unit_tests: fix gcc+ warning (sumogr)
|
|
e509ede trezor: adapt to new passphrase mechanism (ph4r05)
|
|
- choice where to enter passphrase is now made on the host
- use wipeable string in the comm stack
- wipe passphrase memory
- protocol optimizations, prepare for new firmware version
- minor fixes and improvements
- tests fixes, HF12 support
|
|
|
|
|
|
5de2295 Correct key image check in tx_pool (vtnerd)
|
|
|
|
This fixes a test failure now that timestamps are more constrained
|
|
e719760 Fix receive order leakage with tx fluffing (vtnerd)
|
|
68a6507 Fixed bug in ZMQ JSON-RPC method field (vtnerd)
|
|
42a7a4d daemon: auto public nodes - cache and prioritize most stable nodes (xiphon)
|
|
81c5943 Remove temporary std::string creation in some hex->bin calls (vtnerd)
5fcc23a Move hex->bin conversion to monero copyright files and with less includes (vtnerd)
3387f0e Reduce template bloat in hex->bin for ZMQ json (vtnerd)
|
|
dbfa4f8 unit_tests: fix missing test names (xiphon)
|
|
c61abf8 remove empty statements (shopglobal)
|
|
0078ce7 wipeable_string: split - treat CR, LF and Tabs as separators (xiphon)
|
|
e69acff functional_tests: update cookie at 10 seconds interval (moneromooo-monero)
f5a11f0 functional_tests: speed up signature generation (moneromooo-monero)
|
|
|
|
|
|
054b4c7 protocol: request txpool contents when synced (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
d0641b42 net: fix incorrect less operator for top/i2p addresses (Aaron Hook)
|
|
- New flag in NOTIFY_NEW_TRANSACTION to indicate stem mode
- Stem loops detected in tx_pool.cpp
- Embargo timeout for a blackhole attack during stem phase
|
|
Executing a new binary for each signature can get really slow
|
|
Otherwise the daemon will start rejecting
|
|
A newly synced Alice sends a (typically quite small) list of
txids in the local tpxool to a random peer Bob, who then uses
the existing tx relay system to send Alice any tx in his txpool
which is not in the list Alice sent
|
|
|
|
|
|
0f78b06e Various improvements to the ZMQ JSON-RPC handling: (Lee Clagett)
|
|
4771a7ae p2p: remove obsolete local time in handshake (moneromooo-monero)
2fbbc4a2 p2p: avoid sending the same peer list over and over (moneromooo-monero)
3004835b epee: remove backward compatible endian specific address serialization (moneromooo-monero)
39a343d7 p2p: remove backward compatible peer list (moneromooo-monero)
60631802 p2p: simplify last_seen serialization now we have optional stores (moneromooo-monero)
9467b2e4 cryptonote_protocol: omit top 64 bits of difficulty when 0 (moneromooo-monero)
b595583f serialization: do not write optional fields with default value (moneromooo-monero)
5f98b46d p2p: remove obsolete local time from TIMED_SYNC (moneromooo-monero)
|
|
|
|
|
|
- Finding handling function in ZMQ JSON-RPC now uses binary search
- Temporary `std::vector`s in JSON output now use `epee::span` to
prevent allocations.
- Binary -> hex in JSON output no longer allocates temporary buffer
- C++ structs -> JSON skips intermediate DOM creation, and instead
write directly to an output stream.
|
|
f1091c41 core_tests: remove some useless verbose logs (moneromooo-monero)
|
|
987c3139 print_coinbase_tx_sum now supports 128 bits sums (moneromooo-monero)
|
|
a9bdc6e4 Improved performance for epee serialization: (Lee Clagett)
|
|
02b80513 unit_tests: remove invalid bulletproofs unit test (moneromooo-monero)
|
|
|
|
|
|
Cleaning up a little around the code base.
|
|
|
|
d64e5aa7 wallet: allow message sign/verify for subaddresses (moneromooo-monero)
|
|
b90c4bc3 rpc: error out from get_info if the proxied call errors out (moneromooo-monero)
fa16df99 make_test_signature: exit nicely on top level exception (moneromooo-monero)
054b2621 node_rpc_proxy: init some new rpc payment fields in invalidate (moneromooo-monero)
d0faae2a rpc: init a few missing client_info members (moneromooo-monero)
d56a483a rpc: do not propagate exceptions out of a dtor (moneromooo-monero)
3c849188 rpc: always set the update field in update on sucess (moneromooo-monero)
|
|
|
|
56a4469e network: log traffic and add a simple traffic analysis script (moneromooo-monero)
|
|
|
|
|
|
6f330865 fix tests bug added in #6110 (Dusan Klinec)
|
|
70c9cd3c Change to Tx diffusion (Dandelion++ fluff) instead of flooding (Lee Clagett)
|
|
- e.g., fixes gen_block_big_major_version test, error: generation failed: what=events not set, cannot compute valid RandomX PoW
- ask for events only if difficulty > 1 (when it really matters)
- throwing an exception changed to logging, so it is easy to spot a problem if tests start to fail.
|
|
|
|
27522aaa core_tests: reset thread pool between tests (moneromooo-monero)
|
|
da6c807f tests: fix HF12 chaingen - construct bc object from events (Dusan Klinec)
|
|
|
|
261abf7 functional_tests: ensure mining stops on error in mining test (moneromooo-monero)
|
|
dce6f05 rpc: Only show version string if it matches expected pattern (ndorf)
3293780 daemon: Use rpc for 'version' command (ndorf)
|
|
The tail emission will bring the total above 64 bits
|
|
It was intended to check a case which is actually valid (0 gamma),
but was actually duplicating the bad amount test.
Reported by WhatDo_ on IRC.
|
|
Coverity 205411
|
|
|
|
|
|
|
|
Avoids a DB error (leading to an assert) where a thread uses
a read txn previously created with an environment that was
since closed and reopened. While this usually works since
BlockchainLMDB renews txns if it detects the environment has
changed, this will not work if objects end up being allocated
at the same address as the previous instance, leading to stale
data usage.
Thanks hyc for the LMDB debugging.
|
|
|
|
- Removed copy of field names in binary deserialization
- Removed copy of array values in binary deserialization
- Removed copy of string values in json deserialization
- Removed unhelpful allocation in json string value parsing
- Removed copy of blob data on binary and json serialization
|
|
|
|
1554a7768 unit_tests: fix use after free (moneromooo-monero)
|
|
It causes link errors at least on mac
|
|
|
|
|
|
this prevents messing up any subsequent test too
|
|
|
|
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.
This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo
This has some advantages:
- incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
- incentive to run your own node instead of using a third party's, thereby promoting decentralization
- decentralized: payment is done between a client and server, with no third party needed
- private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
- no payment occurs on the blockchain, so there is no extra transactional load
- one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
- no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
- Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
- no large credit balance maintained on servers, so they have no incentive to exit scam
- you can use any/many node(s), since there's little cost in switching servers
- market based prices: competition between servers to lower costs
- incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
- increases network security
- helps counteract mining pools' share of the network hash rate
- zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner
And some disadvantages:
- low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
- payment is "random", so a server might go a long time without a block before getting one
- a public node's overall expected payment may be small
Public nodes are expected to compete to find a suitable level for
cost of service.
The daemon can be set up this way to require payment for RPC services:
monerod --rpc-payment-address 4xxxxxx \
--rpc-payment-credits 250 --rpc-payment-difficulty 1000
These values are an example only.
The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.
The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).
There are three new settings in the wallet:
- credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.
- auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25
- persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.
To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.
The wallet has a few new commands too:
- start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
- stop_mining_for_rpc: stop mining to acquire more credits
- rpc_payments: display information about current credits with
the currently selected daemon
The node has an extra command:
- rpc_payments: display information about clients and their
balances
The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
|
|
9447e72 cryptonote: add function to get weight from a pruned tx (moneromooo-monero)
|
|
be82c40 Support median block size > 4 GB (moneromooo-monero)
|
|
add a 128/64 division routine so we can use a > 32 bit median block
size in calculations
|
|
515e931 functional_tests: fix transfer test - long payment ids are gone (moneromooo-monero)
|
|
|
|
|
|
d4d2b5c p2p+rpc: don't skip p2p or rpc port bind failure by default (xiphon)
|
|
These are dummy ones
|
|
|
|
|
|
|
|
The weight of the prunable data is deterministic from the
unpruned data, so it can be determined from a pruned tx
|
|
|
|
8330e77 monerod can now sync from pruned blocks (moneromooo-monero)
|
|
ae34e1b unit_tests: fix ringdb unit tests (moneromooo-monero)
|
|
2a7d915 Fixed i2p/tor tx flooding bug (white noise disabled) (vtnerd)
|
|
|
|
fdc00d0 unit tests: replace global var with lambda returning static local var (stoffu)
|
|
Coverity fixes [3a81639, 1bd962d, 2825f07, d099658, d46f701, cd57a10] (anonimal)
|
|
If the peer (whether pruned or not itself) supports sending pruned blocks
to syncing nodes, the pruned version will be sent along with the hash
of the pruned data and the block weight. The original tx hashes can be
reconstructed from the pruned txes and theur prunable data hash. Those
hashes and the block weights are hashes and checked against the set of
precompiled hashes, ensuring the data we received is the original data.
It is currently not possible to use this system when not using the set
of precompiled hashes, since block weights can not otherwise be checked
for validity.
This is off by default for now, and is enabled by --sync-pruned-blocks
|
|
Support RandomX PoW algorithm
|
|
7b076d5 p2p: fix bans taking port into account (moneromooo-monero)
|
|
a444f06 blockchain: enforce 10 block age for spending outputs (moneromooo-monero)
|
|
f9b3f6e Removed Berkeley DB and db switching logic (JesusRami)
|
|
2cd4fd8 Changed the use of boost:value_initialized for C++ list initializer (JesusRami)
4ad191f Removed unused boost/value_init header (whyamiroot)
928f4be Make null hash constants constexpr (whyamiroot)
|
|
32f725d Properly format multiline logs (moneromooo-monero)
|
|
Some custom wallet code apparently ignores this, which causes users
of that code to be fingerprinted
|
|
|
|
|
|
and add missing tests
|
|
|
|
|
|
Also fix part of the RPC results being returned as binary.
This makes the RPC backward incompatible.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
