| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
f1ba51c remove -Wall from coverage arguments (Jacob Torrey)
f017fec Build the core_tests under Travis (Jacob Torrey)
e0bf02a Streamline release-test target (Jacob Torrey)
baf4574 Update badge to point to monero's coveralls (Jacob Torrey)
d1dc2c3 Re-enable Travis IRC notifications (Jacob Torrey)
9c71b9e Silence coveralls to prevent 4MB logs (Jacob Torrey)
65041fb Disabled libwallet_api_test until Issue #895 resolved (Jacob Torrey)
a450138 Disable core_tests on Travis-CI (Jacob Torrey)
650afac Added -j2 to Makefile and clean up matrix (Jacob Torrey)
256dec0 Streamline test building target (Jacob Torrey)
14915c2 Ensure tests are built prior to testing (Jacob Torrey)
fe4992b Added coverage g++ commands (Jacob Torrey)
497b24f Update .travis.yml (Jacob Torrey)
678467d Update for the current make environment (Jacob Torrey)
abcac26 Fixed tab/space issue on YAML (Jacob Torrey)
7351a11 Converted to a build matrix for testing and release (Jacob Torrey)
342dbfb Prep for coveralls (Jacob Torrey)
|
|
|
|
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.
Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
|
|
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
|
|
Nothing is pruned, but this allows easier changes later.
|
|
The whole rct data apart from the MLSAGs is now included in
the signed message, to avoid malleability issues.
Instead of passing the data that's not serialized as extra
parameters to the verification API, the transaction is modified
to fill all that information. This means the transaction can
not be const anymore, but it cleaner in other ways.
|
|
for future expansion
|
|
This element is used in the generation of the MLSAG, but isn't
needed in verification.
Also misc changes in the cryptonote code to match, by mooo.
|
|
Saves some substantial space.
Also avoid calculating tx hashes we don't need.
|
|
|
|
|
|
|
|
Scheme design from luigi1114.
|
|
They can be reconstructed from vout
|
|
|
|
|
|
|
|
|
|
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
|
|
to protect the non-signatures parts of the tx from tampering.
|
|
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
|
|
|
|
ie, more data or less data than expected in various fields
|
|
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
|
|
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
|
|
|
|
|
|
|
|
Ported from Shen's RingCT repo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Jacob Torrey <discipleofranok@gmail.com>
|
|
Signed-off-by: Jacob Torrey <discipleofranok@gmail.com>
|
|
|
|
|
|
|
|
|
|
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
|
|
|
|
|
|
d7597c5 refreshing wallet even if error happened (Ilya Kitaev)
6d32a3d wallet_api: async init, Wallet::connected status, log level (Ilya Kitaev)
193d251 libwallet_api cmake: conditionally creating libwallet_merged2 only for STATIC build (Ilya Kitaev)
10c06dd wallet_api: segfault on refresh fixed (Ilya Kitaev)
9d2cb4f WalletListener functionality (Ilya Kitaev)
d27b883 hack to successfull linking for MSYS2 (Ilya Kitaev)
083380c Transaction fee multiplier aka priority integraged (Ilya Kitaev)
00ed12b Wallet::paymentIdValid (Ilya Kitaev)
|
|
* References #886
|
|
|
|
|
|
|
|
It's not really needed, it used to be an optimization for when
that code was not using the db and needed to recalculate things
fast on startup.
|
|
|
|
|
|
|
|
|
|
Wallet::setDefaultMixin, Wallet::defaultMixin;
wallet::create_transaction_2 used in Wallet::createTransaction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transaction API continued
TODOs for Transaction/Transfer interface
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wallet::setDefaultMixin, Wallet::defaultMixin;
wallet::create_transaction_2 used in Wallet::createTransaction
|
|
|
|
|
|
|
|
|
|
|
|
Compilation of bitmonero on Arch with gcc 6.1 results in the following
error:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp: In member function ‘virtual void TestDB::set_hard_fork_version(uint64_t, uint8_t)’:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp:132:5: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
if (versions.size() <= height) versions.resize(height+1); versions[height] = version;
This can be fixed by simply unfolding this line into three lines.
|
|
9ef8c7b tests: fix tests broken by the removal of the block reward accumulation loop (moneromooo-monero)
a6e717e cn_deserialize: deserialize tx_extra too (moneromooo-monero)
3eff37f unit_tests: add a write_varint/read_varint test (moneromooo-monero)
7a66387 unit_tests: fix UNBOUND_LIBRARIES/UNBOUND_LIBRARY typo (moneromooo-monero)
d6bce4b core: move tx_extra parsing errors to log level 1 (moneromooo-monero)
|
|
|
|
|
|
|
|
The tests for rejection of unmixable outputs in v2 are commented out,
as there are no unmixable outputs created anymore. This should be
restored at some point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5092e45 tests: unbound API is only accessible in static builds (moneromooo-monero)
|
|
48d0747 wallet: better output selection for transfer/transfer_new (moneromooo-monero)
|
|
|
|
|
|
|
|
drop obsolete remove_output()
fix get_output_key(global), fix crash in blockchain_dump
|
|
|
|
|
|
|
|
|
|
This now requests the set of outputs that can be mixed first,
to avoid trying non dust but unmixable outputs, which we know
will fail.
|
|
|
|
|
|
|
|
These can be compiled out of libunbound, leading to failure
to check DNSSEC validity.
|
|
|
|
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
|
|
|
|
Reported and tested by smooth
|
|
|
|
Ain't nobody got time for link/cmake skullduggery.
This reverts commit fff238ec94ac6d45fc18c315d7bc590ddfaad63d.
|
|
Useful for debugging users' logs
|
|
They should not have been disabled in the first place
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Match changed BlockchainDB function declaration.
|
|
5ab33ca unit_tests: update test openalias address (moneromooo-monero)
|
|
It was recently changed
|
|
This avoids the need to define that variable in every program
which uses epee.
|
|
d56b2e5 core_tests: fix a compile problem with CLANG (moneromooo-monero)
|
|
It doesn't like const objects from classes that do not have
a user defined ctor, apparently.
Reported by othe.
|
|
Forgot to add them before commit
|
|
|
|
We also replace the --fakechain option with an optional structure
containing details about configuration for the core/blockchain,
for test purposes. This seems more future friendly.
|
|
|
|
|
|
7658ac0 blockchain: revert handle_get_objects adding block id on tx not found (moneromooo-monero)
3a0f4d8 berkeleydb: fix delete/free mismatch (moneromooo-monero)
1642be2 minor bugfixes and refactoring (Thomas Winget)
098dcf2 unit_tests: fix mnemonics unit test testing invalid seeds (moneromooo-monero)
|
|
119eb10 unit_tests: fix hard fork unit tests and add a test for major too (moneromooo-monero)
64a2aa3 hardfork: allow passing chain height in get(height) for convenience (moneromooo-monero)
|
|
Some word triplets, such as "mugged names nail", are not valid
results from any 32 bit value. If used to decode a 32 bit value,
the result will therefore encode to a different word triplet.
Fix this by using random words converted from an actual random
bitstring, ensuring we always get valid triplets.
|
|
|
|
|
|
|
|
|
|
|
|
Needed to add the corresponding (dummy) method to unit test hardfork
|
|
open isn't actually called in those tests
|
|
|
|
1813736 unit_tests: remove an unused variable (moneromooo-monero)
70dd346 unit_tests: fix hardfork test build (moneromooo-monero)
|
|
|
|
The dummy blockchain class needed to have the newly added
is_read_only virtual function.
|
|
This fixes a use after free by ioservice threads
|
|
|
|
Either smaller coin values (as monero has smaller block rewards),
or pre-hard fork values (full reward zone), or post-Bytecoin values
(emission speed).
|
|
Some tests assume the first output in a transaction goes to the recipient.
However, it can be the change. When it is, the recipient's keys will not
recognize this output. To fix this, we send all we have, to ensure there
is no change, and the first output goes to the recipient.
I'm not sure why this worked with Cryptonote. The tests sent 17 coins,
which seems way smaller than the first Bytecoin block reward, so there
would have been change too. Maybe outputs were not shuffled originally.
|
|
While the original cryptonote accepted only the current major
version, we can accept higher ones.
|
|
Block reward may now be less than the full amount allowed.
This was breaking the bitflipping test.
We now keep track of whether a block which was accepted by the core
has a lower than allowed block reward, and allow this in the test.
|
|
A couple stopped passing when the hard fork code was made
to reject incoming hard fork versions it did not know about.
|
|
|
|
|
|
They were trying to send too much monero, and thus failing.
The parameters were set in such a way that the (simple) output
gathering code could fulfill them for 4 block rewards for the
original Bytecoin emission, but that does not work with monero
so we need to use smaller values.
|
|
The current monero consensus uses 0.01 per kB fees, so use enough
for 2 kB transactions for now. It'll probably have to be either
bumped further or changed to calculate the proper fee.
|
|
The core tests use the blockchain, and reset it to be able
to add test data to it. This does not play nice with the
databases, since those will save that data without an explicit
save call.
We add a fakechain flag that the tests will set, which tells
the core and blockchain code to use a separate database, as
well as skip a few things like checkpoints and fixup, which
only make sense for real data.
|
|
This would fail, as the post hard fork settings would yield
different data, and the test expects pre hard fork data.
|
|
|
|
It is already registered in cryptonote::core::init_options,
which we now call
|
|
|
|
Also add some more tests, and rename some instances of
"version" and "add" for clarity.
NOTE: the starting height values are sometimes wrong.
I suspect this is due to the hard fork reorg code being
buggy, since they're good when syncing after the fact.
However, they're not actually used by the consensus code,
so I'm ignoring this for now, but this needs debugging.
|
|
The last relayed time of a transaction is maintained, and
transactions will be relayed again if they are still in the
pool after a certain amount of time, which increases with
the transaction's age. All such transactions are resent,
whether or not they originated on the local node.
|
|
baf101e More changes for 2-min blocks Use the correct block time for realtime fuzz on locktime Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting) Lock unit tests to original block time for now (Javier Smooth)
4fea1a5 Adjust difficulty target (2 min) and full reward zone (60 kbytes) for block version 2 (Javier Smooth)
|
|
|
|
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
|
|
version 2
|
|
It returns the ideal version for a given height, which is
based on the minimum height for a fork, disregarding votes
|
|
And setup the first fork to not vote
|
|
|
|
git history's here if needed to get any of this back
|
|
|
|
Using major version would cause older daemons to reject those
blocks as they fail to deserialize blocks with a major version
which is not 1. There is no such restriction on the minor
version, so switching allows older daemons to coexist with
newer ones till the actual fork date, when most will hopefully
have updated already.
Also, for the same reason, we consider a vote for 0 to be a
vote for 1, since older daemons set minor version to 0.
|
|
|
|
Add a block height before which version 1 is assumed
Use DB transactions
|
|
This allows knowing the hard fork a block must obey in order to be
added to the blockchain. The previous semantics would use that new
block's version vote to determine this hard fork, which made it
impossible to use the rules to validate transactions entering the
tx pool (and made it impossible to validate a block before adding
it to the blockchain).
|
|
There will be a delay on first load of an existing blockchain
as it gets reparsed for this state data.
|
|
This keeps track of voting via block version, in order to decide
when to enable a particular fork's code.
|
|
This ensures one can't instanciate a DNSResolver object by
mistake, but uses the singleton. A separate create static
function is added for cases where a new object is explicitely
needed.
|
|
|
|
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
|
|
|
|
|
|
fee8424 Allow name@domain.tld for OpenAlias lookups (warptangent)
a0fe18f Revert "Allow name@domain.tld for OpenAlias lookups" (warptangent)
|
|
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
|
|
|
|
old unbound #warning does not block compilation
unit tests build fine. Even though the RPC/P2P network type is required again
|
|
|
|
|
|
|
|
|
|
|
|
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.
Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
|
|
51e3579 Fixed bug in static linking boost on MINGW (Thomas Winget)
f78bb00 Hopefully fixes build on Windows for real this time (Thomas Winget)
2b0583b Hopefully fixes build on Windows (Thomas Winget)
9dab105 DNS checkpoint loading for testnet should now be correct (Thomas Winget)
52f9629 sending commands to forked daemon works on testnet now (Thomas Winget)
76289d0 Fix tests building -- function signatures changed (Thomas Winget)
db53e19 revert stop_daemon method to use correct exit (Thomas Winget)
96cbecf RPC calls for background daemon added in (Thomas Winget)
9193d6f Daemonize changes pulled in -- daemon builds (Thomas Winget)
|
|
|
|
Preparation for PR
|
