| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Update Makefile and LICENSE
|
|
Implements view tags as proposed by @UkoeHB in MRL issue
https://github.com/monero-project/research-lab/issues/73
At tx construction, the sender adds a 1-byte view tag to each
output. The view tag is derived from the sender-receiver
shared secret. When scanning for outputs, the receiver can
check the view tag for a match, in order to reduce scanning
time. When the view tag does not match, the wallet avoids the
more expensive EC operations when deriving the output public
key using the shared secret.
|
|
da9aa1f Copyright: Update to 2022 (mj-xmr)
|
|
|
|
|
|
|
|
There are quite a few variables in the code that are no longer
(or perhaps never were) in use. These were discovered by enabling
compiler warnings for unused variables and cleaning them up.
In most cases where the unused variables were the result
of a function call the call was left but the variable
assignment removed, unless it was obvious that it was
a simple getter with no side effects.
|
|
monero_add_executable/monero_add_library where possible (mj-xmr)
Add monero_add_minimal_executable and use in tests
This is done in order not to have to relink targets, when just an .so changed, but not its interface.
|
|
|
|
|
|
|
|
|
|
They are allowed from v12, and MLSAGs are rejected from v13.
|
|
|
|
5ef0607da Update copyright year to 2020 (SomaticFanatic)
|
|
db8563cb performance_tests: some windows fixes (moneromooo-monero)
|
|
Update copyright year to 2020
|
|
Too many iterations cause std::bad_alloc for the timings vector,
and the micro prefix displays as some other character, so use u.
Reported by iDunk
|
|
|
|
Coverity fixes [3a81639, 1bd962d, 2825f07, d099658, d46f701, cd57a10] (anonimal)
|
|
|
|
|
|
|
|
|
|
Based on Boolberry work by:
jahrsg <jahr@jahr.me>
cr.zoidberg <crypto.zoidberg@gmail.com>
|
|
d0e07b3d performance_tests: fix NetBSD build (moneromooo-monero)
7d88d8f2 discontinue use of alloca (moneromooo-monero)
|
|
|
|
1eef0565 performance_tests: better stats, and keep track of timing history (moneromooo-monero)
|
|
|
|
|
|
|
|
This makes it easier to modify the bulletproof format
|
|
5d7c2316 rct: add a zeroCommit cache for common pre-rct case (moneromooo-monero)
|
|
3a056b73 performance_tests: add ge_p3_tobytes (moneromooo-monero)
30f728e3 performance_tests: measure ge_frombytes_vartime only (moneromooo-monero)
|
|
This is called for every pre-rct output at blockchain sync time,
and a lot of them wil hit the cache, saving a scalarmult each.
|
|
|
|
not an extra dynamic cast, which might be heavy
|
|
|
|
|
|
bcf3f6af fuzz_tests: catch unhandled exceptions (moneromooo-monero)
3ebd05d4 miner: restore stream flags after changing them (moneromooo-monero)
a093092e levin_protocol_handler_async: do not propagate exception through dtor (moneromooo-monero)
1eebb82b net_helper: do not propagate exceptions through dtor (moneromooo-monero)
fb6a3630 miner: do not propagate exceptions through dtor (moneromooo-monero)
2e2139ff epee: do not propagate exception through dtor (moneromooo-monero)
0749a8bd db_lmdb: do not propagate exceptions in dtor (moneromooo-monero)
1b0afeeb wallet_rpc_server: exit cleanly on unhandled exceptions (moneromooo-monero)
418a9936 unit_tests: catch unhandled exceptions (moneromooo-monero)
ea7f9543 threadpool: do not propagate exceptions through the dtor (moneromooo-monero)
6e855422 gen_multisig: nice exit on unhandled exception (moneromooo-monero)
53df2deb db_lmdb: catch error in mdb_stat calls during migration (moneromooo-monero)
e67016dd blockchain_blackball: catch failure to commit db transaction (moneromooo-monero)
661439f4 mlog: don't remove old logs if we failed to rename the current file (moneromooo-monero)
5fdcda50 easylogging++: test for NULL before dereference (moneromooo-monero)
7ece1550 performance_test: fix bad last argument calling add_arg (moneromooo-monero)
a085da32 unit_tests: add check for page size > 0 before dividing (moneromooo-monero)
d8b1ec8b unit_tests: use std::shared_ptr to shut coverity up about leaks (moneromooo-monero)
02563bf4 simplewallet: top level exception catcher to print nicer messages (moneromooo-monero)
c57a65b2 blockchain_blackball: fix shift range for 32 bit archs (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
|
|
Stats are: min, median, standard deviation
|
|
|
|
Based on sarang's python code
|
|
|
|
Also constrains bulletproofs to simple rct, for simplicity
|
|
|
|
Ported from sarang's java code
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The basic approach it to delegate all sensitive data (master key, secret
ephemeral key, key derivation, ....) and related operations to the device.
As device has low memory, it does not keep itself the values
(except for view/spend keys) but once computed there are encrypted (with AES
are equivalent) and return back to monero-wallet-cli. When they need to be
manipulated by the device, they are decrypted on receive.
Moreover, using the client for storing the value in encrypted form limits
the modification in the client code. Those values are transfered from one
C-structure to another one as previously.
The code modification has been done with the wishes to be open to any
other hardware wallet. To achieve that a C++ class hw::Device has been
introduced. Two initial implementations are provided: the "default", which
remaps all calls to initial Monero code, and the "Ledger", which delegates
all calls to Ledger device.
|
|
e4646379 keccak: fix mdlen bounds sanity checking (moneromooo-monero)
2e3e90ac pass large parameters by const ref, not value (moneromooo-monero)
61defd89 blockchain: sanity check number of precomputed hash of hash blocks (moneromooo-monero)
9af6b2d1 ringct: fix infinite loop in unused h2b function (moneromooo-monero)
8cea8d0c simplewallet: double check a new multisig wallet is multisig (moneromooo-monero)
9b98a6ac threadpool: catch exceptions in dtor, to avoid terminate (moneromooo-monero)
24803ed9 blockchain_export: fix buffer overflow in exporter (moneromooo-monero)
f3f7da62 perf_timer: rewrite to make it clear there is no division by zero (moneromooo-monero)
c6ea3df0 performance_tests: remove add_arg call stray extra param (moneromooo-monero)
fa6b4566 fuzz_tests: fix an uninitialized var in setup (moneromooo-monero)
03887f11 keccak: fix sanity check bounds test (moneromooo-monero)
ad11db91 blockchain_db: initialize m_open in base class ctor (moneromooo-monero)
bece67f9 miner: restore std::cout precision after modification (moneromooo-monero)
1aabd14c db_lmdb: check hard fork info drop succeeded (moneromooo-monero)
|
|
|
|
Coverity 182572
|
|
fccd1df1 performance_tests: fix build after merging two conflicting patches (moneromooo-monero)
|
|
|
|
|
|
|
|
62c45c0d performance_tests: add a --filter option to select what to run (moneromooo-monero)
|
|
ed215d34 performance_tests: add RingCT MLSAG gen/ver tests (moneromooo-monero)
|
|
Removes a good bit of annoyance running those
|
|
|
|
|
|
|
|
|
|
|
|
937e7f8a Initialize openssl on startup (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
|
|
6a0fb301 performance_tests: adjust some iterations down a bit (moneromooo-monero)
|
|
|
|
|
|
fix a cmakelist
|
|
|
|
|
|
7403e56f performance_tests: report small time per call in microseconds (moneromooo-monero)
cadada2d performance_tests: add tests for sc_reduce32 and cn_fast_hash (moneromooo-monero)
962c72b6 performance_tests: initialize logging at startup (moneromooo-monero)
|
|
This is to not report quick operations as 0 milliseconds
|
|
|
|
|
|
|
|
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
|
|
- It builds but no further testing has been done.
|
|
I think I'm the only one to review things here...
|
|
|
|
At luigi1111's request
|
|
|
|
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
|
|
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.
Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
|
|
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
|
|
This avoids the need to define that variable in every program
which uses epee.
|
|
|
|
|
|
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
|
|
|
|
|
|
Older versions of CMake support LINK_{PUBLIC,PRIVATE} while newer
versions prefer PUBLIC and PRIVATE instead, but still support the LINK_
prefix.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
