| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
edcc094 derive multisig tx secret keys from an entropy source plus the tx inputs' key images (koe)
|
|
5770265 wallet2: keep around transaction prefix for confirmed transfers (tobtoht)
|
|
key images
|
|
bd1e7c5 wallet2: prevent crash when reading tx w/fewer outputs than expected (j-berman)
|
|
c7b2944 multisig: fix critical vulnerabilities in signing (anon)
|
|
|
|
|
|
unconfirmed solely uses a - b, and received now accepts b so it can
provide more detailed logs on what occurred (printing a - b, yet with a
and b).
|
|
2979474 disable multisig by default (moneromooo-monero)
|
|
There are vulnerabilities in multisig protocol if the parties do not
trust each other, and while there is a patch for it, it has not been
throroughly reviewed yet, so it is felt safer to disable multisig by
default for now.
If all parties in a multisig setup trust each other, then it is safe
to enable multisig.
|
|
3.3 seconds -> 2.8 seconds on a test case
|
|
5.2 seconds -> 4.1 seconds on a test case
|
|
5.9 second -> 5.2 seconds on a test case
|
|
Implements view tags as proposed by @UkoeHB in MRL issue
https://github.com/monero-project/research-lab/issues/73
At tx construction, the sender adds a 1-byte view tag to each
output. The view tag is derived from the sender-receiver
shared secret. When scanning for outputs, the receiver can
check the view tag for a match, in order to reduce scanning
time. When the view tag does not match, the wallet avoids the
more expensive EC operations when deriving the output public
key using the shared secret.
|
|
https://github.com/ArticMine/Monero-Documents/blob/master/MoneroScaling2021-02.pdf
with a change to use 1.7 instead of 2.0 for the max long term increase rate
|
|
da9aa1f Copyright: Update to 2022 (mj-xmr)
|
|
ae0a840 wallet2: decrease the amount of data exchanged for output export (moneromooo-monero)
|
|
bd27deb Bulletproofs+ (SarangNoether)
b7713cc Precompute initial transcript hash (SarangNoether)
b535d66 Updates from security audit (SarangNoether)
a0d80b1 plug bulletproofs plus into consensus (moneromooo-monero)
75bd004 ringct: a few minor optimizations from review (moneromooo-monero)
a345060 ringct: port some of vtnerd's review changes from BP+ to BP (moneromooo-monero)
4c94cfe store outPk/8 in the tx for speed (moneromooo-monero)
5acdd0e bulletproofs+: some minor cleanup from vtnerd's review (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
e08abaa multisig key exchange update and refactor (koe)
|
|
|
|
we reuse the wallet_keys_unlocker object, which does the right thing
in conjunction with other users of decrypt/encrypt (ie, refresh).
|
|
|
|
|
|
f9b5b52 fix serialization being different on mac (moneromooo-monero)
|
|
f346e3e wallet_rpc_payments: implement multithreading (gdmojo)
|
|
On Mac, size_t is a distinct type from uint64_t, and some
types (in wallet cache as well as cold/hot wallet transfer
data) use pairs/containers with size_t as fields. Mac would
save those as full size, while other platforms would save
them as varints. Might apply to other platforms where the
types are distinct.
There's a nasty hack for backward compatibility, which can
go after a couple forks.
|
|
|
|
186271e monero-wallet-cli: Added command scan_tx (Horia Mihai David)
|
|
To implement this feature, the wallet2::scan_tx API was implemented.
|
|
|
|
ec14e4b8c wallet2: skip reorgs exceeding max-reorg-depth wallet setting (xiphon)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
They are allowed from v12, and MLSAGs are rejected from v13.
|
|
07442a605 Fix build with Boost 1.74 (moneromooo-monero)
|
|
85899230d simplewallet: allow setting tx keys when sending to a subaddress (moneromooo-monero)
e916201f1 wallet2: fix setting tx keys when another is already set (moneromooo-monero)
|
|
7175dcb10 replace most boost serialization with existing monero serialization (moneromooo-monero)
|
|
This reverts commit 921dd8dde5d381052d0aa2936304a3541a230c55.
|
|
This reduces the attack surface for data that can come from
malicious sources (exported output and key images, multisig
transactions...) since the monero serialization is already
exposed to the outside, and the boost lib we were using had
a few known crashers.
For interoperability, a new load-deprecated-formats wallet
setting is added (off by default). This allows loading boost
format data if there is no alternative. It will likely go
at some point, along with the ability to load those.
Notably, the peer lists file still uses the boost serialization
code, as the data it stores is define in epee, while the new
serialization code is in monero, and migrating it was fairly
hairy. Since this file is local and not obtained from anyone
else, the marginal risk is minimal, but it could be migrated
later if needed.
Some tests and tools also do, this will stay as is for now.
|
|
76c16822d wallet2_api: implement runtime proxy configuration (xiphon)
|
|
Thanks iDunk for testing
|
|
The tx key derivation is different then
|
|
|
|
|
|
5ef0607da Update copyright year to 2020 (SomaticFanatic)
|
|
|
|
Update copyright year to 2020
|
|
7a8c1ee wallet2: fix subaddress expansion when receiving monero (moneromooo-monero)
|
|
8b655de simplewallet: report timestamp based expected unlock time on balance (moneromooo-monero)
|
|
e509ede trezor: adapt to new passphrase mechanism (ph4r05)
|
|
|
|
- choice where to enter passphrase is now made on the host
- use wipeable string in the comm stack
- wipe passphrase memory
- protocol optimizations, prepare for new firmware version
- minor fixes and improvements
- tests fixes, HF12 support
|
|
|
|
- Add abstract_http_client.h which http_client.h extends.
- Replace simple_http_client with abstract_http_client in wallet2,
message_store, message_transporter, and node_rpc_proxy.
- Import and export wallet data in wallet2.
- Use #if defined __EMSCRIPTEN__ directives to skip incompatible code.
|
|
69b5992 simplewallet: new 'address one-off <major> <minor>' command (moneromooo-monero)
|
|
|
|
dab604e wallet2_api: implement estimateTransactionFee (xiphon)
|
|
9c1f970b wallet2: remember daemon address overrides when loading a new wallet (moneromooo-monero)
|
|
ffe7165e wallet: reroll fake outs selection on local tx_sanity_check failure (xiphon)
|
|
a6c24412 wallet: fix exceptions getting the hash of a pruned tx (moneromooo-monero)
|
|
|
|
f717d593 wallet2: guard against race with multiple decrypt_keys users (moneromooo-monero)
|
|
096a9db Wallet: Distingush amounts for a single subaddress (tmoravec)
|
|
d64e5aa7 wallet: allow message sign/verify for subaddresses (moneromooo-monero)
|
|
|
|
|
|
|
|
0de8a0d3 wallet_rpc_server: new estimate_tx_size_and_weight RPC (moneromooo-monero)
|
|
Adding a new `amounts` field ot the output of `get_transfers` RPC
method. This field specifies individual payments made to a single
subaddress in a single transaction, e.g., made by this command:
transfer <addr1> <amount1> <addr1> <amount2>
|
|
|
|
|
|
If more than one thread wants to make sure of the spend secret key,
then we decrypt on the first caller and reencrypt on the last caller,
otherwise we could use an invalid secret key.
|
|
3b8dcc2 wallet2: make keys unlocker reentrant (moneromooo-monero)
|
|
|
|
We get new pool txes before processing any tx, pool or not.
This ensures that if we're asked for a password, this does not
cause a measurable delay in the txpool query after the last
block query.
|
|
The "everything refreshed" state was detected when a refresh call did
not return any new blocks. This can be detected without that extra
"empty" call by comparing the claimed node height to the height of
the last block retrieved. Doing this avoids that last call, saves
some bandwidth, and makes the common refresh case use only one call
rather than two.
As a side effect, it prevents an information leak reported by
Tramèr et al: if the wallet retrieves a set of blocks which includes
an output sent to the refreshing wallet, the wallet will prompt the
user for the password to decode the amount and calculate the key
image for the new output, and this will delay subsequent calls to
getblocks.bin, allowing a passive adversary to note the delay and
deduce when the wallet receives at least one output.
This can still happen if the wallet downloads more than 1000 blocks,
since this will be split in several calls, but then the most the
adversary can tell is which 1000 block section the user received
some monero (the adversary can estimate the heights of the blocks
by calculating how many "large" transfers are done, which will be
sections of blocks, the last of which will usually be below 1000,
but the size of the data should allow the actual number of blocks
sent to be determined fairly accurately).
This timing trick still be used via the subsequent scan for incoming
txes in the txpool, which will be fixed later.
|
|
protects against having your keys mangled
|
|
Lists nodes exposing their RPC port for public use
|
|
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.
This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo
This has some advantages:
- incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
- incentive to run your own node instead of using a third party's, thereby promoting decentralization
- decentralized: payment is done between a client and server, with no third party needed
- private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
- no payment occurs on the blockchain, so there is no extra transactional load
- one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
- no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
- Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
- no large credit balance maintained on servers, so they have no incentive to exit scam
- you can use any/many node(s), since there's little cost in switching servers
- market based prices: competition between servers to lower costs
- incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
- increases network security
- helps counteract mining pools' share of the network hash rate
- zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner
And some disadvantages:
- low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
- payment is "random", so a server might go a long time without a block before getting one
- a public node's overall expected payment may be small
Public nodes are expected to compete to find a suitable level for
cost of service.
The daemon can be set up this way to require payment for RPC services:
monerod --rpc-payment-address 4xxxxxx \
--rpc-payment-credits 250 --rpc-payment-difficulty 1000
These values are an example only.
The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.
The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).
There are three new settings in the wallet:
- credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.
- auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25
- persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.
To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.
The wallet has a few new commands too:
- start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
- stop_mining_for_rpc: stop mining to acquire more credits
- rpc_payments: display information about current credits with
the currently selected daemon
The node has an extra command:
- rpc_payments: display information about clients and their
balances
The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
|
|
93d5cf2 wallet2: add ignore-outputs-{above/below} option (stoffu)
|
|
|
|
|
|
https://github.com/aeonix/aeon/pull/131
|
|
|
|
2ec455d wallet: fix mismatch between two concepts of 'balance' (moneromooo-monero)
|
|
One considers the blockchain, while the other considers the
blockchain and some recent actions, such as a recently created
transaction which spend some outputs, but isn't yet mined.
Typically, the "balance" command wants the latter, to reflect
the recent action, but things like proving ownership wants
the former.
This fixes a crash in get_reserve_proof, where a preliminary
check and the main code used two concepts of "balance".
|
|
|
|
New CLI wallet variable: export-format with options "binary" (the default),
or "ascii". "Binary" behaves as before, "ascii" forces the wallet to convert
data to ASCII using base64.
Reading files from the disk tries to auto detect what format has been
used (using a magic string added when exporting the data).
Implements https://github.com/monero-project/monero/issues/2859
|
|
8be5fea simplewallet: optional all flag to export_outputs/export_key_images (moneromooo-monero)
|
|
dd58057 Remember RPC version on initial connect (hyc)
|
|
f074b6b device: show address on device display (ph4r05)
|
|
bc94ba4 wallet: distinguish between empty and absent attributes (moneromooo-monero)
|
|
|
|
- Trezor: support for device address display (subaddress, integrated address)
- Wallet::API support added
- Simplewallet:
- address device [<index>]
- address new <label> // shows address on device also
- integrated_address [device] <payment_id|address> // new optional "device" arg to display also on the device
|
|
Don't keep asking for it on an intact connection
Wallet is too chatty over the wire
|
|
also add a note when receiving the tx, because the user
might not notice the "XXX blocks to unlock" in the balance.
|
|
|
|
Based on python code by sarang:
https://github.com/SarangNoether/skunkworks/blob/outputs/outputs/simulate.py
|
|
b18f0b10 wallet: new --offline option (moneromooo-monero)
|
|
374f388d wallet_rpc_server: add a all flag to export_outputs (moneromooo-monero)
|
|
It will avoid connecting to a daemon (so useful for cold signing
using a RPC wallet), and not perform DNS queries.
|
|
b40392fb wallet2: add --no-dns flag (moneromooo-monero)
|
|
c68fe787 device/trezor: add button pressed request (Dusan Klinec)
827f52ad wallet: API changes to enable passphrase entry (Dusan Klinec)
|
|
0be5b2ee simplewallet: new unset_ring command (moneromooo-monero)
|
|
c12b43cb wallet: add number of blocks required for the balance to fully unlock (moneromooo-monero)
3f1e9e84 wallet2: set confirmations to 0 for pool txes in proofs (moneromooo-monero)
36c037ec wallet_rpc_server: error out on getting the spend key from a hot wallet (moneromooo-monero)
cd1eaff2 wallet_rpc_server: always fill out subaddr_indices in get_transfers (moneromooo-monero)
|
|
a2561653 wallet: new option to start background mining (moneromooo-monero)
|
|
displays total sent and received bytes
|
|
if we don't want to export new outputs only
|
|
|
|
|
|
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.
This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
|
|
050bb337 wallet2: factor the watchonly/multisig/etc fields on creation (moneromooo-monero)
|
|
d45b85e1 wallet2: skip derivation precalc for blocks we know we'll skip (moneromooo-monero)
|
|
The setup-background-mining option can be used to select
background mining when a wallet loads. The user will be asked
the first time the wallet is created.
|
|
|
|
Useful when debugging, though not much for users
|
|
|
|
f825055d wallet_rpc_server: error out on getting the spend key from a hot wallet (moneromooo-monero)
67aa4adc wallet_rpc_server: add a set_daemon RPC (moneromooo-monero)
705acbac wallet2: init some variables to default values if loading old wallets (moneromooo-monero)
f82bc29e wallet_rpc_server: always fill out subaddr_indices in get_transfers (moneromooo-monero)
01efdc6a wallet_rpc_server: set confirmations to 0 for pending/pool txes (moneromooo-monero)
|
|
|
|
18faa6da wallet: add freeze/thaw/frozen commands (moneromooo-monero)
|
|
0a6cb30d wallet: flush output cache upon reorg (moneromooo-monero)
|
|
8fd7452b wallet: move light wallet RPC out of core RPC (moneromooo-monero)
|
|
There's half a dozen calls, and it's easy to miss some when
adding a new field.
|
|
|
|
|
|
adf6d773 wallet: fix offline signing calling a daemon RPC (moneromooo-monero)
|
|
These commands let one freeze outputs by key image, so they
do not appear in balance, nor are considered when creating
a transaction, etc
This is helpful when receiving an output from a suspected spy,
who might try to track your other outputs by seeing with what
other outputs it gets spent.
The frozen command may be used without parameters to list all
currently frozen outputs.
|
|
|
|
We generate and check tx proofs and verify the amounts in those
match what the original amounts were.
|
|
c9b13fbb tests/trezor: HF9 and HF10 tests (Dusan Klinec)
a1fd1d49 device/trezor: HF10 support added, wallet::API (Dusan Klinec)
d74d26f2 crypto: hmac_keccak added (Dusan Klinec)
|
|
- import only key images generated by cold signing process
- wallet_api: trezor methods added
- wallet: button request code added
- const added to methods
- wallet2::get_tx_key_device() tries to decrypt stored tx private keys using the device.
- simplewallet supports get_tx_key and get_tx_proof on hw device using the get_tx_key feature
- live refresh enables refresh with trezor i.e. computing key images on the fly. More convenient and efficient for users.
- device: has_ki_live_refresh added
- a thread is watching whether live refresh is being computed, if not for 30 seconds, it terminates the live refresh process - switches Trezor state
|
|
8b514645 add multisig tx sets to describe_transfer rpc endpoint (spoke0)
|
|
f42263eb wallet: adds rescan_bc option with preserving key images (Dusan Klinec)
|
|
1f2930ce Update 2019 copyright (binaryFate)
|
|
Fixes output usage tracking
|
|
It's not nothing to do with it
|
|
- enables to perform rescan_spent / ki sync with untrusted daemon. Spent check status involves RPC calls which require trusted daemon status as it leaks information. The new call performs soft reset while preserving key images thus a sequence: refresh, ki sync / import, rescan_bc keep_ki will correctly perform spent checking without need for trusted daemon.
- useful to detect spent outputs with untrusted daemon on watch_only / multisig / hw-cold wallets after expensive key image sync.
- cli: rescan_bc keep_ki
|
|
5ea17909 device/trezor: debugging features, trezor tests (Dusan Klinec)
|
|
|
|
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
|
|
24569454 epee: add SSL support (moneromooo-monero)
|
|
Reported by cutcoin
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
8258a9e7 wallet: do not check txpool in background mode (moneromooo-monero)
|
|
This makes it easier to modify the bulletproof format
|
|
This allows filling in transfer_details when a cold signed tx
gets seen in a block next
|
|
9092fc4b wallet: do not display daemon controlled text if untrusted (moneromooo-monero)
|
|
d7354c78 wallet_rpc_server: add all field to export_key_images (moneromooo-monero)
|
|
This avoids the constant message about needed to run refresh
to enter a password.
Also mention the txpool when asking for the password if the
reason is a pool tx.
|
|
It can get heavy for large wallets
|
|
|
|
|
|
To use if you want all key images, not just the ones for
recently imported outputs
|
|
|
|
d71f89e2 device/trezor: device/trezor: correct device initialization, status check (Dusan Klinec)
65b9bca7 device/trezor: python2 compatibility - bundle dependencies (Dusan Klinec)
9cf636af device/trezor: ask for KI sync on first refresh (Dusan Klinec)
d21dad70 device: enable to use multiple independent device wallets (Dusan Klinec)
318cc784 device/trezor: passphrase entry on host (Dusan Klinec)
|
|
When doing a first refresh on HW-token based wallet KI sync is required if money were received. Received money may indicate wallet was already used before the restore I.e., some transaction could have been already sent from the wallet. The spent UTXO would not be detected as spent which could lead to double spending errors on submitting a new transaction.
Thus if the wallet is HW-token based with the cold signing protocol and the first refresh detected received money the user is asked to perform the key image sync.
|
|
- adds a new option `--hw-device-deriv-path` to the simple wallet. Enables to specify wallet derivation path / wallet code (path avoided so it can be misinterpreted as a file path).
- devices can use different derivation mechanisms. Trezor uses standard SLIP-10 mechanism with fixed SLIP-44 prefix for Monero
- Trezor: when empty, the default derivation mechanism is used with 44'/128'/0'. When entered the derivation path is 44'/128'/PATH.
- Trezor: the path is always taken as elements are hardened (1<<31 bit turned on)
|
|
aee7a4e3 wallet_rpc_server: do not use RPC data if the call failed (moneromooo-monero)
1a0733e5 windows_service: fix memory leak (moneromooo-monero)
0dac3c64 unit_tests: do not rethrow a copy of an exception (moneromooo-monero)
5d9915ab cryptonote: fix get_unit for non default settings (moneromooo-monero)
d4f50cb1 remove some unused code (moneromooo-monero)
61163971 a few minor (but easy) performance tweaks (moneromooo-monero)
30023074 tests: slow_memmem now returns size_t (moneromooo-monero)
|
|
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
|
|
6732fc7f Fix issue 4793 - M/N multisig transaction signature (naughtyfox)
|
|
- simple device callback object added. Device can request passphrase/PIN entry via the callback or notify user some action is required
- callback is routed to wallet2, which routes the callback to i_wallet_callback so CLI or GUI wallets can support passphrase entry for HW tokens
- wallet: device open needs wallet callback first - passphrase protected device needs wallet callback so user can enter passphrase
|
|
Found by codacy.com
|
|
|
|
|
|
157054b8 hardfork: initialize current_fork_index in ctor (moneromooo-monero)
2362baf7 network_throttle: initialize m_last_sample_time in ctor (moneromooo-monero)
d9400f69 serializtion: add missing mainnet and stagenet fields for 0mq (moneromooo-monero)
cbe0122b wallet2: initialize amount to 0 in tx_scan_info_t ctor (moneromooo-monero)
|
|
f26ce08c wallet: add a non destructive blockchain rescan (moneromooo-monero)
|
|
1f35de23 simplewallet: display locked/unlocked state in show_transfers (moneromooo-monero)
|
|
and disable annoying test that requires ridiculous amounts
of skullduggery every time some format changes
|
|
|
|
|
|
It seems the more prudent thing to do here. It will not catch
attempts to use that value before it is initialized when using
ASAN or valgrind, but in a case where it does, it will have
smaller repercussions.
So it seems appropriate in this particular case.
Coverity 182498
|
|
it doesn't display the details, which are already displayed
in show_transfer
|
|
9acf42d3 Multisig M/N functionality core tests added (naughtyfox)
9f3963e8 Arbitrary M/N multisig schemes: * support in wallet2 * support in monero-wallet-cli * support in monero-wallet-rpc * support in wallet api * support in monero-gen-trusted-multisig * unit tests for multisig wallets creation (naughtyfox)
|
|
* support in wallet2
* support in monero-wallet-cli
* support in monero-wallet-rpc
* support in wallet api
* support in monero-gen-trusted-multisig
* unit tests for multisig wallets creation
|
|
|
|
73403004 add --block-notify to monerod and --tx-notify to monero-wallet-{cli,rpc} (moneromooo-monero)
|
|
921b0fb1 use default create_address_file argument (m2049r)
|
|
66901901 README: harmonize command formatting inside README.md (Andrea)
8cd98408 disable AES on s390x architecture (Tuan M. Hoang)
4ed30bab wallet: implement coin splitting for sweep_* 'outputs' option (whythat)
24f52396 wallet: add 'outputs' option for sweep_* commands (whythat)
52e19d69 README: Compile boost with cxxflags=-fPIC cflags=-fPIC (Italocoin Project)
0c77523d README: fill in libsodium package name for Arch (phloatingman)
|
|
|
|
ba8dd347 api/wallet: properly disable key encryption (stoffu)
|
|
'outputs' option allows to specify the number of
separate outputs of smaller denomination that will
be created by sweep operation.
rebased by moneromooo
|
|
|
|
- device name is a new wallet property
- full device name is now a bit more structured so we can address particular device vendor + device path. Example: 'Ledger', 'Trezor:udp', 'Trezor:udp:127.0.0.1:21324', 'Trezor:bridge:usb01'. The part before ':' identifies HW device implementation, the optional part after ':' is device path to look for.
- new --hw-device parameter added to the wallet, can name the hardware device
- device reconnect added
|
|
44259e56 wallet: ask-password can now ask without encrypting the secret spend key (moneromooo-monero)
|
|
|
|
20171746 wallet2: factor the creation of a new wallet keys file (moneromooo-monero)
be6acfd5 wallet2: factor new blockchain setup (moneromooo-monero)
|
|
be001326 remove obsolete daemon selection of fake outs and old tx construction (moneromooo-monero)
|
|
|
|
a54dbaee blockchain_blackball: add --force-chain-reaction-pass flag (moneromooo-monero)
44439c32 record blackballs as amount/offset, and add export ability (moneromooo-monero)
4bce935b blockchain_blackball: more optimizations (moneromooo-monero)
b66ba783 blockchain_blackball: do not process duplicate blockchains parts (moneromooo-monero)
639a3c01 blockchain_blackball: make it clear secondary passes are not incremental (moneromooo-monero)
eb8a51be blockchain_blackball: detect spent outputs by partial ring reuse (moneromooo-monero)
d6d276c6 blockchain_blackball: fix chain reaction phase in incremental mode (moneromooo-monero)
2b2a681b blockchain_blackball: avoid false positives for different amounts (moneromooo-monero)
80e4fef3 blockchain_blackball: set transaction looping txn to read only (moneromooo-monero)
4801d6b5 blockchain_blackball: add stats (moneromooo-monero)
846190fd blockchain_blackball: support pre-v2 databases (moneromooo-monero)
daa6cc7d blockchain_blackball: use LMDB for the cache (moneromooo-monero)
50cb370d ringdb: allow blackballing many outputs at once (moneromooo-monero)
|
|
|
