| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
9acf42d3 Multisig M/N functionality core tests added (naughtyfox)
9f3963e8 Arbitrary M/N multisig schemes: * support in wallet2 * support in monero-wallet-cli * support in monero-wallet-rpc * support in wallet api * support in monero-gen-trusted-multisig * unit tests for multisig wallets creation (naughtyfox)
|
|
* support in wallet2
* support in monero-wallet-cli
* support in monero-wallet-rpc
* support in wallet api
* support in monero-gen-trusted-multisig
* unit tests for multisig wallets creation
|
|
|
|
73403004 add --block-notify to monerod and --tx-notify to monero-wallet-{cli,rpc} (moneromooo-monero)
|
|
921b0fb1 use default create_address_file argument (m2049r)
|
|
66901901 README: harmonize command formatting inside README.md (Andrea)
8cd98408 disable AES on s390x architecture (Tuan M. Hoang)
4ed30bab wallet: implement coin splitting for sweep_* 'outputs' option (whythat)
24f52396 wallet: add 'outputs' option for sweep_* commands (whythat)
52e19d69 README: Compile boost with cxxflags=-fPIC cflags=-fPIC (Italocoin Project)
0c77523d README: fill in libsodium package name for Arch (phloatingman)
|
|
|
|
ba8dd347 api/wallet: properly disable key encryption (stoffu)
|
|
'outputs' option allows to specify the number of
separate outputs of smaller denomination that will
be created by sweep operation.
rebased by moneromooo
|
|
|
|
- device name is a new wallet property
- full device name is now a bit more structured so we can address particular device vendor + device path. Example: 'Ledger', 'Trezor:udp', 'Trezor:udp:127.0.0.1:21324', 'Trezor:bridge:usb01'. The part before ':' identifies HW device implementation, the optional part after ':' is device path to look for.
- new --hw-device parameter added to the wallet, can name the hardware device
- device reconnect added
|
|
44259e56 wallet: ask-password can now ask without encrypting the secret spend key (moneromooo-monero)
|
|
|
|
20171746 wallet2: factor the creation of a new wallet keys file (moneromooo-monero)
be6acfd5 wallet2: factor new blockchain setup (moneromooo-monero)
|
|
be001326 remove obsolete daemon selection of fake outs and old tx construction (moneromooo-monero)
|
|
|
|
a54dbaee blockchain_blackball: add --force-chain-reaction-pass flag (moneromooo-monero)
44439c32 record blackballs as amount/offset, and add export ability (moneromooo-monero)
4bce935b blockchain_blackball: more optimizations (moneromooo-monero)
b66ba783 blockchain_blackball: do not process duplicate blockchains parts (moneromooo-monero)
639a3c01 blockchain_blackball: make it clear secondary passes are not incremental (moneromooo-monero)
eb8a51be blockchain_blackball: detect spent outputs by partial ring reuse (moneromooo-monero)
d6d276c6 blockchain_blackball: fix chain reaction phase in incremental mode (moneromooo-monero)
2b2a681b blockchain_blackball: avoid false positives for different amounts (moneromooo-monero)
80e4fef3 blockchain_blackball: set transaction looping txn to read only (moneromooo-monero)
4801d6b5 blockchain_blackball: add stats (moneromooo-monero)
846190fd blockchain_blackball: support pre-v2 databases (moneromooo-monero)
daa6cc7d blockchain_blackball: use LMDB for the cache (moneromooo-monero)
50cb370d ringdb: allow blackballing many outputs at once (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The secret spend key is kept encrypted in memory, and
decrypted on the fly when needed.
Both spend and view secret keys are kept encrypted in a JSON
field in the keys file. This avoids leaving the keys in
memory due to being manipulated by the JSON I/O API.
|
|
|
|
|
|
a3fe1c5 simplewallet: add set_tx_key for importing tx keys from 3rd party wallets (stoffu)
|
|
1c6cfd3 wallet-rpc: add get_address_index command (stoffu)
|
|
37f0799 wallet: distinguish coinbase from other txes in show_transfers (moneromooo-monero)
|
|
bcab579 wallet: allow adjusting number of rounds for the key derivation function (stoffu)
|
|
34d4b79 wallet2: use a gamma distribution to pick fake outs (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
a4272de wallet2: unlock keys file before calling verify_password (needed for Windows) (stoffu)
|
|
d6440ab wallet2: recover from index out of hashchain bounds error (moneromooo-monero)
|
|
d6d78f1 Allow fractional outputs to be ignored (stoffu)
|
|
This can happen when there's a very large reorg on the daemon
(ie, on testnet)
|
|
This should be proof against any way one might get to multiple
processing, such as generating the same derivation from the
same pubkey, etc
|
|
as per "An Empirical Analysis of Linkability in the Monero
Blockchain", by Miller et al.
|
|
Also added notes to WalletManager::verifyWalletPassword (which afaik seems unused
by anyone at the moment) regarding the need to unlock the keys file beforehand.
|
|
|
|
|
|
dcbc17e wallet: include a suggested number of confirmations based on amount (moneromooo-monero)
|
|
8db23df wallet: on first refresh, start off with a quantized height (moneromooo-monero)
|
|
798dfcf wallet: allow unspendable unmixable outputs to be discarded (stoffu)
|
|
This is based on how much an attacking miner stands to lose in block
rewardy by mining a private chain which double spends a payment.
This is not foolproof, since mining is based on luck, and breaks
down as the attacking miner nears 50% of the network hash rate,
and the estimation is based on a constant block reward.
|
|
a2b557f 6795bd0 209ec96 ed2c81e a830db2 57ea902 31a895e ba8331c f7f1917 41be339 f025ae9 ef2cb63 dcfd299 5d3e702 2704624 2771a18 0e4c7d0 (moneromooo-monero)
|
|
Speeds up syncing with a lot of outgoing outputs as key generation
runs Cryptonight.
|
|
|
|
key derivation and checking for incoming outputs are threaded
in batch before adding blocks to the local blockchain. Other
minor bits and bobs are also cached.
|
|
|
|
Processing typically is the bottleneck
|
|
also use reserve where appropriate
|
|
d7a6b72 wallet2: fix bulletproof cold signing (moneromooo-monero)
|
|
89e51ec simple-wallet-cli: Add warnings about inaccurate balances to to watch-only wallet (jcktm)
|
|
9c2a7b4 wallet-rpc: watch-only and cold wallet features added (ph4r05)
|
|
for privacy reasons, so an untrusted node can't easily track
wallets from IP address to IP address, etc. The granularity
is 1024 blocks, which is about a day and a half.
|
|
|
|
b21bc00 Wallet: added methods to sign and verify arbitrary message with multisig public signer's key (libwallet & wallet api) (naughtyfox)
|
|
Cold signing was always using Borromean range proofs, causing
a larger tx, and an incorrect fee
|
|
- unsigned_txset, signed_txset in transfer / submit_transfer / sign_transfer
- export_outputs, import_outputs
Squashed commits:
[f4d9f3d4] wallet-rpc: do_not_relay removed from submit_transfer
[5b16a86f] wallet-rpc: review-fix - method signature changes, renaming
[b7fbb10a] wallet-rpc: naming fixes (unsigned vs signed), consts renamed
[8c7d2727] wallet-rpc: sign_transfer added
[481d024a] wallet2: sign_tx splitted to work with strings and structs, more granular
[2a474db9] wallet-rpc: wallet2::load_unsigned_tx split to load from str, file
[b1e3a018] wallet-rpc: review fix, load_tx_from_str variable rename
[1f6373be] wallet-rpc: review fix: save_tx_to_{str,file}
[2a08eafc] wallet-rpc: review comments fixes
- redundant this removed from wallet2.cpp
- load_tx_from_str, load_tx_from_file
[43498052] wallet-rpc: submit_transfer added
[9c45d1ad] wallet-rpc: watch_only check, return unsigned_txset
[62831396] wallet2: added string variants to load_tx, save_tx
- analogously to save_multisig_tx
- required for monero-wallet-rpc to support watch-only wallet
|
|
47fdb74 WalletApi: getMultisigInfo entry for gui wallets... (naughtyfox)
47fdb74 Refactored: work with wallet api statuses to make setting and getting operations atomic along with error strings (naughtyfox)
|
|
80d2f80 wallet2: Update function parameter documentation (leonklingele)
|
|
wallet
|
|
public signer's key (libwallet & wallet api)
|
|
eecfb57d wallet: warn if not using the default ring size (moneromooo-monero)
|
|
|
|
WalletApi: makeMultisig call introduced
WalletApi: finalizeMultisig call introduced
WalletApi: new calls exportMultisigImages and importMultisigImages
WalletApi: method to return multisig wallet creation state
WalletApi: create multisig transaction, sign multisig transaction, commit transaction and get multisig data are added
WalletApi: identation and style fixes
|
|
|
|
via user setting first, then DNS TXT record, hardcoded fallback
|
|
lookahead in order to avoid
so looooong time of set-up when creating a HW based wallet.
|
|
It can now take a txid (to display rings for all its inputs),
and will print rings in a format that set_ring understands
|
|
This is so one can set rings for spent key images in case the
attackers don't merge the ring matching patch set.
|
|
|
|
|
|
If a pre-fork output is spent on both Monero and attack chain,
any post-fork output can be deduced to be a fake output, thereby
decreasing the effective ring size.
The segregate-per-fork-outputs option, on by default, allows
selecting only pre-fork outputs in this case, so that the same
ring can be used when spending it on the other side, which does
not decrease the effective ring size.
This is intended to be SET when intending to spend Monero on the
attack fork, and to be UNSET if not intending to spend Monero
on the attack fork (since it leaks the fact that the output being
spent is pre-fork).
If the user is not certain yet whether they will spend pre-fork
outputs on a key reusing fork, the key-reuse-mitigation2 option
should be SET instead.
If you use this option and intend to spend Monero on both forks,
then spend real Monero first.
|
|
This maps key images to rings, so that different forks can reuse
the rings by key image. This avoids revealing the real inputs like
would happen if two forks spent the same outputs with different
rings. This database is meant to be shared with all Monero forks
which don't bother making a new chain, putting users' privacy at
risk in the process. It is placed in a shared data directory by
default ($HOME/.shared-ringdb on UNIX like systems). You may
use --shared-ringdb-dir to override this location, and should
then do so for all Monero forks for them to share the database.
|
|
|
|
calls to wallet2
|
|
This completes and fixes various parameters docs
|
|
1979d53d wallet: fixes and tweaks to the save_watch_only command (moneromooo-monero)
|
|
wallets
Previously, a file containing the unencrypted Monero address was
created by default in the wallet's directory. This file might pose
as a privacy risk. The creation of this file is now opt-in and can
be enabled by providing
--create-address-file
|
|
- save the new keys file as FOO-watchonly.keys, not FOO.keys-watchonly
- catch any exception (eg, I/O errors) and error out
- print the new keys filename in simplewallet
|
|
|
|
The basic approach it to delegate all sensitive data (master key, secret
ephemeral key, key derivation, ....) and related operations to the device.
As device has low memory, it does not keep itself the values
(except for view/spend keys) but once computed there are encrypted (with AES
are equivalent) and return back to monero-wallet-cli. When they need to be
manipulated by the device, they are decrypted on receive.
Moreover, using the client for storing the value in encrypted form limits
the modification in the client code. Those values are transfered from one
C-structure to another one as previously.
The code modification has been done with the wishes to be open to any
other hardware wallet. To achieve that a C++ class hw::Device has been
introduced. Two initial implementations are provided: the "default", which
remaps all calls to initial Monero code, and the "Ledger", which delegates
all calls to Ledger device.
|
|
89ad162a wallet2: remove unused m_subaddresses_inv (moneromooo-monero)
f2c4c399 wallet2: speed up subaddress generation (by about a third) (moneromooo-monero)
|
|
|
|
|
|
3be98036 wallet-cli: Do not ask for scan_from_height if it explicitly is set to zero. (Maximilian Lupke)
|
|
not full)
|
|
|
|
3160a930 wallet2: remove {set|get}_default_decimal_point and use the same funcs under cryptonote:: instead (stoffu)
7d1088d3 wallet2: make scan_output const and omit keys arg (stoffu)
bc1ee2c2 wallet2: make member functions const when possible (stoffu)
|
|
ca336c62 simplewallet: check file overwrite when exporting stuff (stoffu)
|
|
ffc2e570 wallet rpc: show fees when querying incoming transfers (stoffu)
|
|
|
|
cryptonote:: instead
|
|
|
|
|
|
|
|
|
|
Fixes #3080
|
|
|
|
5cbcf0aa wallet: support for multisig seeds (moneromooo-monero)
|
|
|
|
They are hex rather than words, because they are a lot longer
than "normal" seeds, as they have to embed a lot more information
|
|
|
|
|
|
|
|
|
|
While there, move the wallet2 ctor to the cpp file as it's a huge
amount of init list now, and remove an unused one.
|
|
Thanks to kenshi84 for help getting this work
|
|
|
|
|
|
|
|
|
|
Scheme by luigi1111:
Multisig for RingCT on Monero
2 of 2
User A (coordinator):
Spendkey b,B
Viewkey a,A (shared)
User B:
Spendkey c,C
Viewkey a,A (shared)
Public Address: C+B, A
Both have their own watch only wallet via C+B, a
A will coordinate spending process (though B could easily as well, coordinator is more needed for more participants)
A and B watch for incoming outputs
B creates "half" key images for discovered output D:
I2_D = (Hs(aR)+c) * Hp(D)
B also creates 1.5 random keypairs (one scalar and 2 pubkeys; one on base G and one on base Hp(D)) for each output, storing the scalar(k) (linked to D),
and sending the pubkeys with I2_D.
A also creates "half" key images:
I1_D = (Hs(aR)+b) * Hp(D)
Then I_D = I1_D + I2_D
Having I_D allows A to check spent status of course, but more importantly allows A to actually build a transaction prefix (and thus transaction).
A builds the transaction until most of the way through MLSAG_Gen, adding the 2 pubkeys (per input) provided with I2_D
to his own generated ones where they are needed (secret row L, R).
At this point, A has a mostly completed transaction (but with an invalid/incomplete signature). A sends over the tx and includes r,
which allows B (with the recipient's address) to verify the destination and amount (by reconstructing the stealth address and decoding ecdhInfo).
B then finishes the signature by computing ss[secret_index][0] = ss[secret_index][0] + k - cc[secret_index]*c (secret indices need to be passed as well).
B can then broadcast the tx, or send it back to A for broadcasting. Once B has completed the signing (and verified the tx to be valid), he can add the full I_D
to his cache, allowing him to verify spent status as well.
NOTE:
A and B *must* present key A and B to each other with a valid signature proving they know a and b respectively.
Otherwise, trickery like the following becomes possible:
A creates viewkey a,A, spendkey b,B, and sends a,A,B to B.
B creates a fake key C = zG - B. B sends C back to A.
The combined spendkey C+B then equals zG, allowing B to spend funds at any time!
The signature fixes this, because B does not know a c corresponding to C (and thus can't produce a signature).
2 of 3
User A (coordinator)
Shared viewkey a,A
"spendkey" j,J
User B
"spendkey" k,K
User C
"spendkey" m,M
A collects K and M from B and C
B collects J and M from A and C
C collects J and K from A and B
A computes N = nG, n = Hs(jK)
A computes O = oG, o = Hs(jM)
B anc C compute P = pG, p = Hs(kM) || Hs(mK)
B and C can also compute N and O respectively if they wish to be able to coordinate
Address: N+O+P, A
The rest follows as above. The coordinator possesses 2 of 3 needed keys; he can get the other
needed part of the signature/key images from either of the other two.
Alternatively, if secure communication exists between parties:
A gives j to B
B gives k to C
C gives m to A
Address: J+K+M, A
3 of 3
Identical to 2 of 2, except the coordinator must collect the key images from both of the others.
The transaction must also be passed an additional hop: A -> B -> C (or A -> C -> B), who can then broadcast it
or send it back to A.
N-1 of N
Generally the same as 2 of 3, except participants need to be arranged in a ring to pass their keys around
(using either the secure or insecure method).
For example (ignoring viewkey so letters line up):
[4 of 5]
User: spendkey
A: a
B: b
C: c
D: d
E: e
a -> B, b -> C, c -> D, d -> E, e -> A
Order of signing does not matter, it just must reach n-1 users. A "remaining keys" list must be passed around with
the transaction so the signers know if they should use 1 or both keys.
Collecting key image parts becomes a little messy, but basically every wallet sends over both of their parts with a tag for each.
Thia way the coordinating wallet can keep track of which images have been added and which wallet they come from. Reasoning:
1. The key images must be added only once (coordinator will get key images for key a from both A and B, he must add only one to get the proper key actual key image)
2. The coordinator must keep track of which helper pubkeys came from which wallet (discussed in 2 of 2 section). The coordinator
must choose only one set to use, then include his choice in the "remaining keys" list so the other wallets know which of their keys to use.
You can generalize it further to N-2 of N or even M of N, but I'm not sure there's legitimate demand to justify the complexity. It might
also be straightforward enough to support with minimal changes from N-1 format.
You basically just give each user additional keys for each additional "-1" you desire. N-2 would be 3 keys per user, N-3 4 keys, etc.
The process is somewhat cumbersome:
To create a N/N multisig wallet:
- each participant creates a normal wallet
- each participant runs "prepare_multisig", and sends the resulting string to every other participant
- each participant runs "make_multisig N A B C D...", with N being the threshold and A B C D... being the strings received from other participants (the threshold must currently equal N)
As txes are received, participants' wallets will need to synchronize so that those new outputs may be spent:
- each participant runs "export_multisig FILENAME", and sends the FILENAME file to every other participant
- each participant runs "import_multisig A B C D...", with A B C D... being the filenames received from other participants
Then, a transaction may be initiated:
- one of the participants runs "transfer ADDRESS AMOUNT"
- this partly signed transaction will be written to the "multisig_monero_tx" file
- the initiator sends this file to another participant
- that other participant runs "sign_multisig multisig_monero_tx"
- the resulting transaction is written to the "multisig_monero_tx" file again
- if the threshold was not reached, the file must be sent to another participant, until enough have signed
- the last participant to sign runs "submit_multisig multisig_monero_tx" to relay the transaction to the Monero network
|
|
Scheme by luigi1111
|
|
|
|
3dffe71b new wipeable_string class to replace std::string passphrases (moneromooo-monero)
7a2a5741 utils: initialize easylogging++ in on_startup (moneromooo-monero)
54950829 use memwipe in a few relevant places (moneromooo-monero)
000666ff add a memwipe function (moneromooo-monero)
|
|
|
|
b0426d4c Fixes #759 Add sanity check on restore height (Cifrado)
|
|
|
|
b0b7e0f0 Spend proof without txkey (stoffu)
|
|
9739da1e wallet_rpc_server: new relay_tx command (moneromooo-monero)
01dc8297 wallet: transfer RPC can now return tx metadata (pending_tx) (moneromooo-monero)
83fa9047 serialization: add std::set and std::unordered_set serialization (moneromooo-monero)
|
|
|
|
|
|
|
|
- refactoring: proof generation/checking code was moved from simplewallet.cpp to wallet2.cpp
- allow an arbitrary message to be signed together with txid
- introduce two types (outbound & inbound) of tx proofs; with the same syntax, inbound is selected when <address> belongs to this wallet, outbound otherwise. see GitHub thread for more discussion
- wallet RPC: added get_tx_key, check_tx_key, get_tx_proof, check_tx_proof
- wallet API: moved WalletManagerImpl::checkPayment to Wallet::checkTxKey, added Wallet::getTxProof/checkTxProof
- get_tx_key/check_tx_key: handle additional tx keys by concatenating them into a single string
|
|
|
|
|
|
|
|
wallet2 is a library, and should not prompt for stdin. Instead,
pass a function so simplewallet can prompt on stdin, and a GUI
might display a window, etc.
|
|
d70515fc Used declared default refresh status as default rather than it's current value (Maxime THIEBAUT)
|
|
2677ade5 simplewallet: forbid 0 ring size (moneromooo-monero)
da8b60cb simplewallet: reject attempts to use too low mixin early (moneromooo-monero)
|
|
d269bff2 wallet2: use a vector, not a list, for selected_transfers (moneromooo-monero)
|
|
This yields a clear error message rather then some possibly
confusing more technical errors down the line
|
|
Friendlier on memory/speed, we know in advance the max amount
of items, which are small and constant size, and there's a lot
of list walking involved.
|
|
Transactions in the txpool are marked when another transaction
is seen double spending one or more of its inputs.
This is then exposed wherever appropriate.
Note that being marked with this "double spend seen" flag does
NOT mean this transaction IS a double spend and will never be
mined: it just means that the network has seen at least another
transaction spending at least one of the same inputs, so care
should be taken to wait for a few confirmations before acting
upon that transaction (ie, mostly of use for merchants wanting
to accept unconfirmed transactions).
|
|
b370ef54 Wallet: Descriptions through new commands 'set_description', 'get_description' (rbrunner7)
|
|
b2d416f2 Distinguish "not enough money" and "not enough unlocked money" (binaryFate)
|
|
|
|
d0463312 fix libwallet api test after api change (Jaquee)
a46c1eed Wallet2: Don't throw when subaddress label doesn't exist (Jaquee)
086b7db2 Wallet API: default values for account and subaddr index (Jaquee)
|
|
|
|
When loading an older wallet cache, they wouldn't be initialized,
leading them to have random(ish) values, and so assigned to some
random subaddress.
|
|
|
|
Fix #1530
|
|
452d4fae tests: fix hashchain unit tests (moneromooo-monero)
|
|
97c2e449 wallet2+API: use separate callbacks for lightwallets (Jaquee)
d9261867 walletAPI: correct confirmations in txHistory for unsynced wallets (Jaquee)
9442b043 walletAPI: lightwallet exceptions (Jaquee)
fc922934 walletAPI: add lightwallet login() and importWalletRequest() (Jaquee)
79207743 walletAPI: init() lightwallet and SSL support (Jaquee)
dde5a1fc walletAPI: add tx unlock_time (Jaquee)
bba5cbed wallet2: remove obsolete get_num_rct_outputs() call from create_transactions_2 (Jaquee)
7a482f30 wallet2: create_transactions_2 lightwallet support (Jaquee)
ce61b818 wallet2: get_outs lightwallet support (Jaquee)
1197cb71 wallet2: commit_tx() lightwallet support (Jaquee)
43b57804 wallet2: refactor is_tx_spendtime_unlocked() (Jaquee)
32e2b003 wallet2: add lightwallet exceptions to common functions (Jaquee)
2e692fc0 wallet2: refresh() lightwallet support (Jaquee)
f44d156c my/openmonero API functions (Jaquee)
288d3c75 wallet2: add remove_obsolete_pool_txs() (Jaquee)
2c6aad7e wallet2: add on_pool_tx_removed callback (Jaquee)
ff7c30aa wallet2: light wallet member variables (Jaquee)
e2a276cb wallet2: add ssl option to init() (Jaquee)
a13540be add string_tools::validate_hex() (Jaquee)
fd773d88 refactor cryptonote_basic::add_tx_pub_key_to_extra (Jaquee)
8bfa6c2d lightwallet rpc server commands (Jaquee)
76961ddc Serializer: string to integer conversion for MyMonero compatibility (Jaquee)
1cf940f2 epee http_client SSL support (Jaquee)
eec10137 CMakeLists.txt - Add openssl include dir (Jaquee)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
d74336d5 wallet: encrypt (un)signed tx, also optionally save unencrypted raw tx hexstr (stoffu)
|
|
|
|
|
|
|
|
bd937139 wallet2: error check for generate_key_image_helper, removed redundant wallet_generate_key_image_helper (stoffu)
|
|
and relax the not-empty safety check to stay more intuitiuve
|
|
wallet_generate_key_image_helper
|
|
|
|
It'd prevent further syncing. Recovery of empty hash chains is
automatic, but requires a running daemon
|
|
This saves a lot of space and load/save time for wallet caches
|
|
|
|
|
|
|
|
This uses luigi1111's CN_Add method.
See https://xmr.llcoins.net for details.
|
|
adce8ae4 simplewallet: new "fee" command to display fee information (moneromooo-monero)
|
|
d58700e0 WalletAPI: only allow trusted daemon when importing key images (Jaquee)
8a9bbd26 WalletAPI: copy wallet data when creating a view only wallet (Jaquee)
d27fe32e wallet2: export/import wallet data functions (Jaquee)
225a25f3 import_key_images - allow importing without being connected to daemon (Jaquee)
|
|
including expected transaction backlog at different priorities
|
|
|
|
|
|
|
|
b7d6ec83 simplewallet: add (out of sync) or (no daemon) markers in the prompt (moneromooo-monero)
fa23a500 wallet2: add a is_synced function (moneromooo-monero)
f1307bbd node_rpc_proxy: add a proxy for target height (moneromooo-monero)
|
|
ad4649ac Enable verifying wallet password with having to load wallet. (m2049r)
|
|
c97d1bd3 wallet: return unlock_time in get_transfers (moneromooo-monero)
|
|
When scanning the txpool without having first updated the
blockchain, the tx would be seen as neither in the txpool
nor the chain, and removed, so it'd only reappear once the
chain is refreshed, and the tx seen in a block.
|
|
|
|
|
|
also show it in simplewallet's show_transfer
|
|
|
|
|
|
It sweeps all outputs below the given threshold
This is available via the existing sweep_all RPC, by setting
amount_threshold the desired amount (in atomic units)
|
|
Reviewed and squashed. Open/Create is only allowed if no walletfile
was specified at startup.
|
|
With the change from the original transfer method to the new
algorithm, payments to the same destination were merged. It
seemed like a good idea, optimizing space. However, it is a
useful tool for people who want to split large outputs into
several smaller ones (ie, service providers making frequent
payments, and who do not like a large chunk of their balance
being locked for 10 blocks after each payment).
Default to off, which is a change from the previous behavior.
|
|
When a single input is enough to satisfy a transfer, the code would
previously try to add a second input, to match the "canonical" makeup
of a transaction with two inputs and two outputs. This would cause
wallets to slowly merge outputs till all the monero ends up in a
single output, which causes trouble when making two transactions
one after the other, since change is locked for 10 blocks, and an
increasing portion of the remaining balance would end up locked on
each transaction.
There are two new settings (min-output-count and min-output-value)
which can control when to stop adding such unneeded second outputs.
The idea is that small "dust" outputs will still get added, but
larger ones will not.
Enable with, eg:
set min-output-count 10
set min-output-value 30
to avoid using an unneeded second output of 30 monero or more, if
there would be less than 10 such outputs left.
This does not invalidate any other reason why such outputs would
be used (ie, when they're really needed to satisfy a transfer, or
when randomly picked in the normal course of selection). This may
be improved in the future.
|
|
350e99ae wallet2: cache which pool txes were scanned already (moneromooo-monero)
|
|
This massively speeds up the wallet updating the pool on mainnet,
where the tx backlog is more than 500 txes.
|
|
Asking for a full histogram from a remote node (since it's
untrusted) is pretty slow, and spams the remote node, so
we replace it by only adding a second input if we have rct
ones, which are for all intents and purposes always mixable.
|
|
Minimum mixin 4 and enforced ringct is moved from v5 to v6.
v5 is now used for an increased minimum block size (from 60000
to 300000) to cater for larger typical/minimum transaction size.
The fee algorithm is also changed to decrease the base per kB
fee, and add a cheap tier for those transactions which we do
not care if they get delayed (or even included in a block).
|
|
4b48565c wallet: add password command (moneromooo-monero)
|
|
Also tweak wallet2 password code to verify password without
saying it's a new wallet, because it's assuming things.
|
|
|
|
2c468dd4 allow user I/O in millinero, micronero, nanonero, piconero (moneromooo-monero)
|
|
|
|
|
