Age | Commit message (Collapse) | Author | Files | Lines |
|
ebc6ce44f cryptonote: untangle dependency from miner to blockchain (moneromooo-monero)
|
|
It causes link errors at least on mac
|
|
|
|
|
|
5734686 rpc: Include tag in get_info version string (ndorf)
|
|
|
|
This allows flushing internal caches (for now, the bad tx cache,
which will allow debugging a stuck monerod after it has failed to
verify a transaction in a block, since it would otherwise not try
again, making subsequent log changes pointless)
|
|
Lists nodes exposing their RPC port for public use
|
|
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.
This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo
This has some advantages:
- incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
- incentive to run your own node instead of using a third party's, thereby promoting decentralization
- decentralized: payment is done between a client and server, with no third party needed
- private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
- no payment occurs on the blockchain, so there is no extra transactional load
- one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
- no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
- Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
- no large credit balance maintained on servers, so they have no incentive to exit scam
- you can use any/many node(s), since there's little cost in switching servers
- market based prices: competition between servers to lower costs
- incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
- increases network security
- helps counteract mining pools' share of the network hash rate
- zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner
And some disadvantages:
- low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
- payment is "random", so a server might go a long time without a block before getting one
- a public node's overall expected payment may be small
Public nodes are expected to compete to find a suitable level for
cost of service.
The daemon can be set up this way to require payment for RPC services:
monerod --rpc-payment-address 4xxxxxx \
--rpc-payment-credits 250 --rpc-payment-difficulty 1000
These values are an example only.
The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.
The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).
There are three new settings in the wallet:
- credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.
- auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25
- persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.
To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.
The wallet has a few new commands too:
- start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
- stop_mining_for_rpc: stop mining to acquire more credits
- rpc_payments: display information about current credits with
the currently selected daemon
The node has an extra command:
- rpc_payments: display information about clients and their
balances
The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
|
|
|
|
|
|
fd48461 Print cdifficulty and don't serialize miner tx hash twice (Doy-lee)
|
|
d4d2b5c p2p+rpc: don't skip p2p or rpc port bind failure by default (xiphon)
|
|
3455efa ban peers sending bad pow outright (moneromooo-monero)
|
|
|
|
8330e77 monerod can now sync from pruned blocks (moneromooo-monero)
|
|
|
|
Coverity fixes [3a81639, 1bd962d, 2825f07, d099658, d46f701, cd57a10] (anonimal)
|
|
If the peer (whether pruned or not itself) supports sending pruned blocks
to syncing nodes, the pruned version will be sent along with the hash
of the pruned data and the block weight. The original tx hashes can be
reconstructed from the pruned txes and theur prunable data hash. Those
hashes and the block weights are hashes and checked against the set of
precompiled hashes, ensuring the data we received is the original data.
It is currently not possible to use this system when not using the set
of precompiled hashes, since block weights can not otherwise be checked
for validity.
This is off by default for now, and is enabled by --sync-pruned-blocks
|
|
Support RandomX PoW algorithm
|
|
PoW is expensive to verify, so be strict
|
|
7b076d5 p2p: fix bans taking port into account (moneromooo-monero)
|
|
2cd4fd8 Changed the use of boost:value_initialized for C++ list initializer (JesusRami)
4ad191f Removed unused boost/value_init header (whyamiroot)
928f4be Make null hash constants constexpr (whyamiroot)
|
|
Also fix part of the RPC results being returned as binary.
This makes the RPC backward incompatible.
|
|
|
|
f91a06c Dropping cppzmq dependency; adding some zmq utils (vtnerd)
|
|
495a7e5 rpc: don't include an address in mining_status when not mining (moneromooo-monero)
|
|
21f6c80 rpc: move a leftover light wallet RPC out of daemon RPC (moneromooo-monero)
|
|
289d215 rpc: fix unitialized 'core_rpc_server::m_was_bootstrap_ever_used' (xiphon)
|
|
The issue is triggered by the captured `this` in RPC server, which
passes reference to throwable `core_rpc_server`:
`core_rpc_server.cpp:164: m_bootstrap_daemon.reset(new bootstrap_daemon([this]{ return get_random_public_node(); }));`
The solution is to simply remove noexcept from the remaining `bootstrap_daemon`
constructors because noexcept is false in this context.
>"An exception of type "boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::asio::invalid_service_owner>>" is thrown but the throw list "noexcept" doesn't allow it to be thrown. This will cause a call to unexpected() which usually calls terminate()."
|
|
082730b daemon: automatic public nodes discovering and bootstrap daemon switching (xiphon)
|
|
|
|
Best case is an address mined previously and it'll get returned,
worst case it was never initialized in the first place
|
|
|
|
|
|
It does not leak much since you can make a fair guess by RPC
version already, and some people want to avoid non release
clients when using third parties' nodes (because they'd never
lie about it)
|
|
|
|
fd60d05 daemon: fix print_pl only printing public zone peers (moneromooo-monero)
|
|
|
|
b712ae0 rpc: work around a GCC 7.4.0 (at least) bug (moneromooo-monero)
|
|
6560bfa rpc: get_block_template add optional extra_nonce (jtgrassie)
|
|
dc8b7a8 zmq: MacPorts latest fix (jtgrassie)
|
|
1db5357 rpc headers fix (malbit)
|
|
a182df2 Bans for RPC connections (hyc)
|
|
1488109 rpc: fix get_transactions getting v1 txes from the txpool (moneromooo-monero)
|
|
52cd2fa rpc: implement get_public_nodes command (xiphon)
|
|
0605406 daemon: sort alt chains by height (moneromooo-monero)
4228ee0 daemon: add optional arguments to alt_chain_info (moneromooo-monero)
880ebfd daemon: add more chain specific info in alt_chain_info (moneromooo-monero)
|
|
df83ed7 consensus: from v12, enforce >= 2 outputs (moneromooo-monero)
|
|
new cli options (RPC ones also apply to wallet):
--p2p-bind-ipv6-address (default = "::")
--p2p-bind-port-ipv6 (default same as ipv4 port for given nettype)
--rpc-bind-ipv6-address (default = "::1")
--p2p-use-ipv6 (default false)
--rpc-use-ipv6 (default false)
--p2p-require-ipv4 (default true, if ipv4 bind fails and this is
true, will not continue even if ipv6 bind
successful)
--rpc-require-ipv4 (default true, description as above)
ipv6 addresses are to be specified as "[xx:xx:xx::xx:xx]:port" except
in the cases of the cli args for bind address. For those the square
braces can be omitted.
|
|
|
|
b8cfa92 rpc: implement set_bootstrap_daemon method (xiphon)
|
|
cf8cb68 rpc: use ip address string representation for peer::host field (xiphon)
|
|
fcfcc3a rpc: in/out peers can now return the setting's value (moneromooo-monero)
|
|
6abaaaa remove obsolete save_graph skeleton code (moneromooo-monero)
|
|
25a7cfd add a few checks where it seems appropriate (moneromooo-monero)
1a66a86 remove unused code (moneromooo-monero)
|
|
|
|
|
|
rather than their string representation
|
|
Circumvents the need to create a new blockhashing blob when you already
know the data you want to set in the extra_nonce (so use this instead of
reserve_size).
|
|
|
|
|
|
|
|
Make bans control RPC sessions too. And auto-ban some bad requests.
Drops HTTP connections whenever response code is 500.
|
|
|
|
In static member function ‘static boost::optional<cryptonote::rpc::output_distribution_data> cryptonote::rpc::RpcHandler::get_output_distribution(const std::function<bool(long unsigned int, long unsigned int, long unsigned int, long unsigned int&, std::vector<long unsigned int>&, long unsigned int&)>&, uint64_t, uint64_t, uint64_t, const std::function<crypto::hash(long unsigned int)>&, bool, uint64_t)’:
cc1plus: warning: ‘void* __builtin_memset(void*, int, long unsigned int)’: specified size 18446744073709551536 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
|
|
It would try to get their prunable hash, but v1 txes don't have one
|
|
|
|
issue: #5568
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
e9809382 fix wide difficulty conversion with some versions of boost (moneromooo-monero)
|
|
0eb0d6b8 rpc: improve get_output_distribution (moneromooo-monero)
|
|
|
|
|
|
SHA1 is too close to bruteforceable
|
|
It can now handle small reorgs without having to rescan the
whole blockchain.
Also add a test for it.
|
|
|
|
c30d93fc rpc: add a pruned bool to the prune_blockchain call (moneromooo-monero)
|
|
d009f6dd rpc: fix get_block_hashes.bin from wallet on pruned blockchain (moneromooo-monero)
bb0ef5b1 blockchain: lock the blockchain while pruning (moneromooo-monero)
|
|
7d79222f daemon: remove debug info (moneromooo-monero)
8fec0f98 functional_tests: add sweep_single test (moneromooo-monero)
9880d61b wallet_rpc_server: remove unused code (moneromooo-monero)
8a61b33d rpc: omit irrelevant fields for pool txes in gettransactions (moneromooo-monero)
56508524 rpc: add relayed in get_transaction output (moneromooo-monero)
82e510f1 rpc: set default log category in core_rpc_server.h (moneromooo-monero)
|
|
b3648232 daemon: fix ratio not being floating point (moneromooo-monero)
e1b097b9 core_rpc_server: remove dummy assigning int to bool (moneromooo-monero)
|
|
ccb996af rpc: new sanity check on relayed transactions (moneromooo-monero)
|
|
f3425f8d rpc.getblocktemplate: set reserved_offset to zero when reserve_size==0 (stoffu)
|
|
|
|
We want to get all blocks here, even pruned ones
|
|
|
|
|
|
|
|
e78cea74 rpc: fix off by one in get_height (moneromooo-monero)
|
|
cbf32241 rpc: make wide_difficulty hexadecimal (moneromooo-monero)
|
|
Coverity 197653
|
|
This will weed out some transactions with silly rings
|
|
|
|
|
|
Related to emission, reorgs, getting tx data back, output
distribution and histogram
|
|
c746f45d Add hash of top block to /getheight RPC (Howard Chu)
|
|
a2561653 wallet: new option to start background mining (moneromooo-monero)
|
|
|
|
Currently if a user specifies a ca file or fingerprint to verify peer,
the default behavior is SSL autodetect which allows for mitm downgrade
attacks. It should be investigated whether a manual override should be
allowed - the configuration is likely always invalid.
|
|
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.
This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
|
|
|
|
This should be friendlier for clients which don't have bignum support
|
|
The setup-background-mining option can be used to select
background mining when a wallet loads. The user will be asked
the first time the wallet is created.
|
|
|
|
c23ea796 New interactive daemon command 'print_net_stats': Global traffic stats (rbrunner7)
|
|
dc20d774 rpc: add miner tx hash to block header response (moneromooo-monero)
|
|
a7211793 rpc: quantize db size up to 5 GB in restricted mode (moneromooo-monero)
|
|
8fd7452b wallet: move light wallet RPC out of core RPC (moneromooo-monero)
|
|
|
|
Based on Boolberry work by:
jahrsg <jahr@jahr.me>
cr.zoidberg <crypto.zoidberg@gmail.com>
|
|
be6f426a rpc: Allow submitting tx as hex blob over ZMQ (Nathan Dorfman)
|
|
|
|
3907588b rpc: make fill_pow restricted (moneromooo-monero)
|
|
|
|
|
|
551104fb daemon: add --public-node mode, RPC port propagation over P2P (xiphon)
|
|
59478c80 daemon: new mining_status command (moneromooo-monero)
|
|
bb2aed8e rpc: quantize db size up to 5 GB in restricted mode (moneromooo-monero)
|
|
It's not nothing to do with it
|
|
|
|
It's slow work, so let's not expose it
|
|
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
|
|
24569454 epee: add SSL support (moneromooo-monero)
|
|
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
|
|
|
|
|
|
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
|
|
|
|
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
|
|
9092fc4b wallet: do not display daemon controlled text if untrusted (moneromooo-monero)
|
|
008647d7 blockchain_db: speedup tx output gathering (moneromooo-monero)
|
|
570dd369 p2p: use vector instead of list for peer lists (moneromooo-monero)
|
|
|
|
We know all the data we'll want for getblocks.bin is contiguous
|
|
5ca4994c rpc: speed up the common get_output_distribution case while syncing (moneromooo-monero)
|
|
dc1c1252 add command pop_blocks (Jason Wong)
|
|
|
|
243f010e rpc: mask values that are nobody else's business in restricted RPC (moneromooo-monero)
|
|
aee7a4e3 wallet_rpc_server: do not use RPC data if the call failed (moneromooo-monero)
1a0733e5 windows_service: fix memory leak (moneromooo-monero)
0dac3c64 unit_tests: do not rethrow a copy of an exception (moneromooo-monero)
5d9915ab cryptonote: fix get_unit for non default settings (moneromooo-monero)
d4f50cb1 remove some unused code (moneromooo-monero)
61163971 a few minor (but easy) performance tweaks (moneromooo-monero)
30023074 tests: slow_memmem now returns size_t (moneromooo-monero)
|
|
|
|
517f25ef rpc: add version to get_info (Jethro Grassie)
|
|
60f36386 Avoid unnecessary temp block and copy ctor (moneromooo-monero)
|
|
6f2497bc Don't cache nettype in core_rpc_server use m_core (doy-lee)
|
|
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
|
|
add new public method to Blockchain and update according to code review
update after review: better lock/unlock, try catch and coding style
|
|
|
|
fc98f7a0 rpc: speedup get_outs.bin (moneromooo-monero)
|
|
|
|
Found by codacy.com
|
|
Makes more sense than uint64_t for an offset, and agrees with
the %zu used to print results.
Found by codacy.com
|
|
|
|
and decrease the amount of data carried around
|
|
block already has a default ctor, and the extra object
churn due to its innards (vectors, etc) is pointless.
|
|
|
|
This can go out of sync with m_core's nettype if you run in fakechain
mode since entering fakechain mode is done through code not the command
line and core_rpc_server only looks at the command line to figure out
the nettype.
|
|
|
|
e61062b6 use current height - 1 for top block height in err msgs (cryptochangements34)
|
|
dad5bbfd return message in stop_mining if mining never started (cryptochangements34)
|
|
73e504c1 rpc: adjust ring size error message now that too high is also possible (moneromooo-monero)
a5ca7f4f core: fix unmixable special case allowing ring size below 11 (moneromooo-monero)
|
|
Undefined symbols for architecture x86_64:
"cryptonote::core::get_output_distribution(unsigned long long, unsigned long long, unsigned long long, unsigned long long&, std::__1::vector<unsigned long long, std::__1::allocator<unsigned long long> >&, unsigned long long&) const", referenced from:
cryptonote::rpc::RpcHandler::get_output_distribution(cryptonote::core&, unsigned long long, unsigned long long, unsigned long long, bool) in rpc_handler.cpp.o
|
|
6097472a Update ZMQ fee estimate and add ZMQ output distribution (Lee Clagett)
|
|
|
|
|
|
|
|
0aff4987 rpc: fix build with older compilers (moneromooo-monero)
|
|
3ffbec15 rpc: init m_rpc_version in Message ctor (moneromooo-monero)
bfa2dce1 rpc: remove unused ctors (moneromooo-monero)
7cc39845 account: init creation timestamp to 0 (moneromooo-monero)
32123789 wallet2: initialize some scalar fields in ctor where appropriate (moneromooo-monero)
4eca42b2 blockchain_db: initialize m_hardfork in ctor just in case (moneromooo-monero)
|
|
|
|
|
|
Fix for #4399.
Also unifies code for serializing pruned tx to binary/json into one.
|
|
f5f7c2ac rpc: blanket initialize 0MQ request and response structures (moneromooo-monero)
|
|
b916ca63 rpc: fix output distribution caching ignoring chain changes (moneromooo-monero)
|
|
0 is placeholder for whole chain, so we should compare chain
height changes rather than chain-height-or-zero. Even this isn't
totally foolproof if a blocks are popped and the same number
added again, but it is much better as it prevents the data from
slowly going out of sync.
|
|
|
|
Coverity 182501
|
|
Also prevents coverity from moaning about them not initializing fields
|
|
|
|
|
|
f77ce675 rpc: allow pruning of json encoded txs (cryptochangements34)
|
|
ac934663 rpc: add a "is an update available" flag in get_info (moneromooo-monero)
|
|
4f81cd3a rpc: add cumulative difficulty in block header data (moneromooo-monero)
|
|
03c07b16 rpc: return "already mining" in start_mining if already mining (moneromooo-monero)
|
|
cd647612 rpc: don't include start time if restricted (moneromooo-monero)
|
|
76f95f05 rpc: allow to pass RPC login via RPC_LOGIN env var (Dusan Klinec)
|
|
|
|
|
|
Make it easier for a user to be told when to update
|
|
|
|
|
|
|
|
|
|
- passing by parameter is insecure as it is shown in the process list
|