| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
123fc2a2 i2p: initial support (Jethro Grassie)
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
|
|
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
|
|
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
|
|
d1b3990d p2p: don't stop the idle thread when no gray peers are found (moneromooo-monero)
|
|
a5ffc2d5 Remove boost::lexical_cast for uuid and unused uuid function (Lee Clagett)
|
|
85665003 epee: better network buffer data structure (moneromooo-monero)
|
|
|
|
avoids pointless allocs and memcpy
|
|
|
|
|
|
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
|
|
03fc731b p2p: less frequent incoming connections check (moneromooo-monero)
14a5c206 p2p: tone down "no incoming connections" warning to info if in peers is 0 (moneromooo-monero)
|
|
|
|
|
|
Also add an info if not offline, since it weakens the network
|
|
|
|
2d48861d p2p: only deinitialize what's been initialized in offline mode (moneromooo-monero)
|
|
|
|
as per the source documentation
|
|
76d6d832 Revert "p2p: connect via the bound ip, if any" (moneromooo-monero)
|
|
This reverts commit 909398efc79cb1fa92e330e9a50a316ca5858953.
It looks like it's causing trouble with tor on some setups
|
|
|
|
909398e p2p: connect via the bound ip, if any (moneromooo-monero)
|
|
438d52d remove epee from link lines where it's redundant (moneromooo-monero)
|
|
149da42 db_lmdb: enable batch transactions by default (stoffu)
34cb6b4 add --regtest and --fixed-difficulty for regression testing (vicsn)
9e1403e update get_info RPC and bump RPC version (vicsn)
207b66e first new functional tests (vicsn)
|
|
|
|
on_generateblocks RPC call combines functionality from the on_getblocktemplate and on_submitblock RPC calls to allow rapid block creation. Difficulty is set permanently to 1 for regtest.
Makes use of FAKECHAIN network type, but takes hard fork heights from mainchain
Default reserve_size in generate_blocks RPC call is now 1. If it is 0, the following error occurs 'Failed to calculate offset for'.
Queries hard fork heights info of other network types
|
|
For some reason, this confuses and kills ASAN on startup
as it thinks const uint8_t ipv4_network_address::ID is
defined multiple times.
|
|
08b85a8 cryptonote_config: add get_config to refactor x = testnet ? config::testnet::X : stagenet ? config::stagenet::X : config::X (stoffu)
0cf80ba net_node: resolve host for node addresses given via command line flags (stoffu)
|
|
de1ffe0 p2p: warn when no incoming connections are seen for a while (moneromooo-monero)
|
|
|
|
config::testnet::X : stagenet ? config::stagenet::X : config::X
|
|
|
|
Those were added to the seed nodes list even when they had already
been added. Moreover, the current index was not reset after they
were added, typically causing previous seeds to be used, and some
of those fallback seeds to not be tried.
|
|
|
|
(cherry picked from commit a7366b5feeffaeb65b217b2d6f138e0ab1c90192)
|
|
(cherry picked from commit b16a282f97d8f6c967e8a0b1ecfd75110f095182)
|
|
11c933e1 fix lambda compile error on openbsd (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
1d28c0d8 p2p: restore m_testnet assignment lost during rebase (whythat)
|
|
|
|
|
|
|
|
|
|
eda9fb5b p2p: fix testnet/mainnet port mixup (moneromooo-monero)
|
|
e4646379 keccak: fix mdlen bounds sanity checking (moneromooo-monero)
2e3e90ac pass large parameters by const ref, not value (moneromooo-monero)
61defd89 blockchain: sanity check number of precomputed hash of hash blocks (moneromooo-monero)
9af6b2d1 ringct: fix infinite loop in unused h2b function (moneromooo-monero)
8cea8d0c simplewallet: double check a new multisig wallet is multisig (moneromooo-monero)
9b98a6ac threadpool: catch exceptions in dtor, to avoid terminate (moneromooo-monero)
24803ed9 blockchain_export: fix buffer overflow in exporter (moneromooo-monero)
f3f7da62 perf_timer: rewrite to make it clear there is no division by zero (moneromooo-monero)
c6ea3df0 performance_tests: remove add_arg call stray extra param (moneromooo-monero)
fa6b4566 fuzz_tests: fix an uninitialized var in setup (moneromooo-monero)
03887f11 keccak: fix sanity check bounds test (moneromooo-monero)
ad11db91 blockchain_db: initialize m_open in base class ctor (moneromooo-monero)
bece67f9 miner: restore std::cout precision after modification (moneromooo-monero)
1aabd14c db_lmdb: check hard fork info drop succeeded (moneromooo-monero)
|
|
2e584dcb p2p: do not try to connect to peers in offline mode (moneromooo-monero)
|
|
Coverity 136394 136397 136409 136526 136529 136533 175302
|
|
|
|
It was already possible to limit outgoing connections. One might want
to do this on home network connections with high bandwidth but low
usage caps.
|
|
This rename is needed so that delete_in_connections can be added.
|
|
This is needed so that a max_in_connection_count can be added.
|
|
|
|
fd1dfac5 p2p: don't lookup seed IPs if using an exclusive peer (moneromooo-monero)
b50182ae p2p: don't connect to seeds if using an exclusive peer (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
|
|
d28c388f p2p: stop net server before closing starting connections (moneromooo-monero)
|
|
|
|
43f5269f Wallets now do not depend on the daemon rpc lib (moneromooo-monero)
bb89ae8b move connection_basic and network_throttle from src/p2p to epee (moneromooo-monero)
4abf25f3 cryptonote_core does not depend on p2p anymore (moneromooo-monero)
|
|
These even had the epee namespace.
This fixes some ugly circular dependencies.
|
|
As a followon side effect, this makes a lot of inline code
included only in particular cpp files (and instanciated
when necessary.
|
|
|
|
abebe392 rpc: add offline state in info rpc (moneromooo-monero)
7696e849 core: make --offline also disable DNS lookups (moneromooo-monero)
|
|
This fixes a hang on exit due to race where a connection adds
itself to the server after the starting connections are closed,
but before the net server marks itself as stopped.
|
|
|
|
Deleted 3 out of 4 calls to method connection_basic::sleep_before_packet
that were erroneous / superfluous, which enabled the elimination of a
"fudge" factor of 2.1 in connection_basic::set_rate_up_limit;
also ended the multiplying of limit values and numbers of bytes
transferred by 1024 before handing them over to the global throttle
objects
|
|
0d9c0db9 Do not build against epee_readline if it was not built (Howard Chu)
178014c9 split off readline code into epee_readline (moneromooo-monero)
a9e14a19 link against readline only for monerod and wallet-wallet-{rpc,cli} (moneromooo-monero)
437421ce wallet: move some scoped_message_writer calls from the libs (moneromooo-monero)
e89994e9 wallet: rejig to avoid prompting in wallet2 (moneromooo-monero)
ec5135e5 move input_line from command_line to simplewallet (moneromooo-monero)
082db75f move cryptonote command line options to cryptonote_core (moneromooo-monero)
|
|
Those have no reason to be in a generic module
|
|
It's nasty, and actually breaks on Solaris, where if.h fails to
build due to:
struct map *if_memmap;
|
|
The commands handler must not be destroyed before the config
object, or we'll be accessing freed memory.
An earlier attempt at using boost::shared_ptr to control object
lifetime turned out to be very invasive, though would be a
better solution in theory.
|
|
- internal nullptr checks
- prevent modifications to network_address (shallow copy issues)
- automagically works with any type containing interface functions
- removed fnv1a hashing
- ipv4_network_address now flattened with no base class
|
|
p2p uses it, and the cpp file needs to know the symbols should
be public
|
|
28b72b6e tx_pool: pre-init tvc.m_verifivation_failed before processing (moneromooo-monero)
50a629b2 core_tests: catch (impossible in practice) tx extra api failure (moneromooo-monero)
fee15ef1 wallet2: catch failure to parse address (moneromooo-monero)
1399e26d net_peerlist: remove dead code (moneromooo-monero)
50e09698 tx_pool: guard against failure getting tx hash (moneromooo-monero)
54cc209a wallet_rpc_server: catch failure to create directory (moneromooo-monero)
3e55099c wallet_rpc_server: init m_vm to NULL in ctor (moneromooo-monero)
7d0dde5e wallet_args: remove redundant default value for --log-file (moneromooo-monero)
ed4a3350 wallet2: catch failure to save keys file (moneromooo-monero)
44434c8a wallet2_api: check whether dynamic_cast returns NULL (moneromooo-monero)
92f2f687 core: check return value from parse_hexstr_to_binbuff (moneromooo-monero)
5475692e wallet2_api: remove an unused, uninitialized, field (moneromooo-monero)
a7ba3de1 libwallet_api_tests: initialize newblock_triggered on reset (moneromooo-monero)
b2763ace wallet2_api: init error code to "no error" in the ctor (moneromooo-monero)
b5faac53 get_blockchain_top now returns void (moneromooo-monero)
2e44d8f2 wallet_rpc_server: guard against exceptions (moneromooo-monero)
4230876b simplewallet: guard against I/O exceptions (moneromooo-monero)
06c1e057 daemon: initialize decode_as_json in RPC request (moneromooo-monero)
11f71af5 http_base: init size_t in http_request_info ctor (moneromooo-monero)
|
|
e29282d2 build: auto update version info without manually deleting version.h (stoffu)
|
|
CID 175290
|
|
054054c9 p2p: disable gray list housekeeping when an exclusive node is given (moneromooo-monero)
|
|
ef005f5e p2p: add a couple early outs when the stop signal is received (moneromooo-monero)
80d361c7 abstract_tcp_server2: improve tracking/cancelling of early connections (moneromooo-monero)
|
|
|
|
e3680b69 Rename m_listenning_port to m_listening_port (MaxXor)
a1ea475f Delete UPnP port mapping on exit (MaxXor)
|
|
Exclusive nodes may be used for privacy reasons, and thus we don't
want to connect to other nodes, even for checking connectivity.
See https://github.com/monero-project/monero/issues/2346
|
|
e3c4395a p2p: init hashes after deserializing a network address (moneromooo-monero)
|
|
|
|
|
|
|
|
Fixes multiple connections to the same address
|
|
Fix sync wedge corner case:
It could happen if a connection went into standby mode, while
it was the one which had requested the next span, and that span
was still waiting for the data, and that peer is not on the
main chain. Other peers can then start asking for that data
again and again, but never get it as only that forked peer does.
And various other fixes
|
|
This avoids quicker exit
|
|
7fdc178a p2p: fix random peer index being too large (moneromooo-monero)
|
|
6ce769c1 p2p: get net log spam down a bit (moneromooo-monero)
|
|
cb2d5110 Tweak net logs so we get more info on why networking can't start (moneromooo-monero)
|
|
This should prevent "silent" failures to start
|
|
|
|
|
|
This avoids failing to connect to the network in case all
known peers are unavailable (which can happen if the peer
list is small).
|
|
This fixes nodes not being able to connect to nodes which use
recent code. While there, init peer_id too.
|
|
158c3ecf core: thread most of handle_incoming_tx (moneromooo-monero)
f57ee382 cryptonote_protocol: retry stale spans early (moneromooo-monero)
90df52e1 cryptonote_protocol: light cleanup (moneromooo-monero)
84e23156 cryptonote_protocol: avoid spurious SYNCHRONIZED OK messages (moneromooo-monero)
5be43fcd cryptonote_protocol_handler: sync speedup (moneromooo-monero)
|
|
214fd81e some include cleanup (moneromooo-monero)
|
|
c6ba7d11 p2p: move m_in_timedsync from connection_context to p2p_connection_context (moneromooo-monero)
|
|
04ebfbfe p2p: close connections when exiting (moneromooo-monero)
9a10148c p2p: fix thread leak (moneromooo-monero)
|
|
06aea2cf move get_proof_of_trust_hash from util.h to p2p_protocol_defs.h (moneromooo-monero)
|
|
A block queue is now placed between block download and
block processing. Blocks are now requested only from one
peer (unless starved).
Includes a new sync_info coommand.
|
|
This will keep leak traces less noisy, as those were one off
allocations that were technically leaking.
|
|
It's got no place in the base class as it's P2P specific field
|
|
|
|
This ensures they don't leak if they were in the middle of an
async operation.
|
|
|
|
This avoids having to include p2p_protocol_defs.h in util.h,
as util.h is used a lot, and p2p_protocol_defs.h includes
a lot of other things that most users don't need.
|
|
Since I had to add an ID to the derived classes anyway,
this can be used instead. This removes an apparently
pointless warning from CLANG too.
|
|
07c4276c Don't issue a new timedsync while one is already in progress (Howard Chu)
cf3a376c Don't timeout a slow operation that's making progress (Howard Chu)
340830de Fix PR#2039 (Howard Chu)
|
|
A timedsync is issued every minute on a connection, but the input
tineout is 2 minutes. This means a new sync request could be issued
while a slow sync request was already in progress. The additional
request will further clog the network on a slow connection, and
cause a premature timeout.
|
|
All code which was using ip and port now uses a new IPv4 object,
subclass of a new network_address class. This will allow easy
addition of I2P addresses later (and also IPv6, etc).
Both old style and new style peer lists are now sent in the P2P
protocol, which is inefficient but allows peers using both
codebases to talk to each other. This will be removed in the
future. No other subclasses than IPv4 exist yet.
|
|
8277e67f Add anchor connections (Miguel Herranz)
|
|
In case the DNS seed(s) is/are down, which would otherwise
cause the fallback seeds to never be used. Also if the seeds
resolve to too few IPs.
|
|
Prevents the system from always picking the gray peers with the most
recent last_seen.
|
|
get_random_gray_peer is used to implement feeler connections, described
in: https://eprint.iacr.org/2015/263.pdf 2. Random selection
|
|
|
|
|
|
They're now used by core to determine the data directory to use
for the txpool directory.
This fixes an assert in the core tests, which don't use the RPC
server, which normally initializes the P2P code.
|
|
|
|
This is only used to load, not save
|
|
Based on https://eprint.iacr.org/2015/263.pdf 4. Anchor connections.
Peer list serialisation version bumped to 5.
|
|
|
|
ca94d0a4 Separate data per P2P port (Miguel Herranz)
|
|
0644eed7 Remove boost/foreach.cpp includes (Miguel Herranz)
36dd3e23 Replace BOOST_REVERSE_FOREACH with ranged for (Miguel Herranz)
629e3101 Replace BOOST_FOREACH with C++11 ranged for (Miguel Herranz)
|
|
poolstate.bin and p2pstate.bin are stored in .bitmonero/ if the default
P2P port is being used.
If another port is used both files are stored in
.bitmonero/PORTNUMBER/.
|
|
CATCH_ENTRY_L0 already returns the second value.
|
|
|
|
|
|
|
|
4cdf0a35 p2p: always recreate a new peer id on startup (moneromooo-monero)
|
|
f8b97aef p2p: show ban/unban logs by default again (moneromooo-monero)
|
|
This prevents easy fingerprinting when you change IPs, and
will be a must when kovri gets used.
|
|
|
|
|
|
|
|
|
|
A random peer from the gray peer list is selected and a connection is
made to check if the peer is alive.
If the connection and handshake are successful the peer is promoted to
the white peer list, in case of failure the peer is evicted from the
gray peer list.
The connection is closed after the check in either case.
|
|
cbcdf8ad Honor depth in get_peerlist_head method (Miguel Herranz)
|
|
0e0e6c5f Reduce to one connection per IP (Miguel Herranz)
3f269e98 Limit incoming connections from the same IP (Miguel Herranz)
|
|
The method returned depth + 2 because:
- push_back was executed before the condition.
- > instead of >= causing one more iteration.
|
|
|
|
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
|
|
|
|
|
|
net_node.inl, completely adandon boost/archive/binary_oarchive.hpp
|
|
f4772bae Fix a few minor typos (Pierre Boyer)
|
|
3f7d6fb5 Fix delayed exit when syncing (moneromooo-monero)
|
|
7c0dd5e4 net_node: drop connections from banned IPs after looping through connections (moneromooo-monero)
|
|
|
|
|
|
This keeps the connections lock just for the time of looping
and adding connectoins to a list, and the dropping happens
after it. This should avoid lengthy delays waiting for the
connections lock.
|
|
|
|
|
|
Added a new command to the P2P protocol definitions to allow querying for support flags.
Implemented handling of new support flags command in net_node. Changed for_each callback template to include support flags. Updated print_connections command to show peer support flags.
Added p2p constant for signaling fluffy block support.
Added get_pool_transaction function to cryptnote_core.
Added new commands to cryptonote protocol for relaying fluffy blocks.
Implemented handling of fluffy block command in cryptonote protocol.
Enabled fluffy block support in node initial configuration.
Implemented get_testnet function in cryptonote_core.
Made it so that fluffy blocks only run on testnet.
|
|
e57379a p2p: drop any existing connection to a banned IP (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
|
|
The default port is then used
|
|
de030d9 fix: error: -Werror=misleading-indentation (moneroexample)
c2d7300 contrib: epee: add exception spec to throwing destructors (redfish)
6898741 src: p2p: add exception spec to throwing destructors (redfish)
21dbc95 crypto: slow-hash: fix misleading indent (redfish)
70f3634 crypto: slow-hash: remove unused hash list for ARM (redfish)
1a7772f crypto: oaes_lib: remove unused _NR array (redfish)
6462a3a crypto: fix compile error: use named type in sizeof (redfish)
|
|
e409e59 Print stack trace on exceptions (moneromooo-monero)
ef4ff42 connection_basic: avoid gratuitous exception (moneromooo-monero)
|
|
The destructors get a noexcept(true) spec by default, but these
destructors in fact throw exceptions. An alternative fix might be to not
throw (most if not all of these throws are non-essential
error-reporting/logging).
|
|
If there is no comms error, but the response is not as expected,
close would not be called.
|
|
The remote endpoint is usually invalid, so use a version of the
call that returns an error code instead.
|
|
Ain't nobody got time for link/cmake skullduggery.
This reverts commit fff238ec94ac6d45fc18c315d7bc590ddfaad63d.
|
|
Useful for debugging users' logs
|
|
|
|
and all other associated IPC
|
|
std::thread crashes on (at least) ARMv6 g++ 4.8/4.9
|
|
|
|
|
|
They do not take the object lock, and are meant to be used only
internally, called from a function which does take the lock.
|
|
One loop was not paying attention to the stop signal, and could
end up looping forever
|
|
|
|
63cb1a5 move another non user useful log to L1 (moneromooo-monero)
02827d5 p2p: minor log formatting fix (moneromooo-monero)
|
|
|
|
Remove trailing whitespace in same files.
|
|
336b375 Register daemon command line arguments to core if they're used in core (moneromooo-monero)
|
|
This fixes coretests, which does not register daemon specific arguments,
but uses core, which uses those arguments. Also gets rid of an unwanted
dependency on daemon code from core.
|
|
2c83055 net_node: add a --offline argument (moneromooo-monero)
|
|
It will not try to connect to the monero network, nor listen
|
|
Clear any partially loaded data, and start with a default config
|
|
|
|
m_blocked_ips now stores the unblocking time, rather than the
blocking time.
Also change > to >=, since banning for 0 seconds should not ban
|
|
With minor cleanup and fixes (spelling, indent) by moneromooo
|
|
|
|
upnpDiscover() takes a new argument for TTL.
Use the suggested default of 2.
|
|
Each thread can use the same resolver.
|
|
|
