| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
std::thread crashes on (at least) ARMv6 g++ 4.8/4.9
|
|
|
|
|
|
They do not take the object lock, and are meant to be used only
internally, called from a function which does take the lock.
|
|
One loop was not paying attention to the stop signal, and could
end up looping forever
|
|
|
|
63cb1a5 move another non user useful log to L1 (moneromooo-monero)
02827d5 p2p: minor log formatting fix (moneromooo-monero)
|
|
|
|
Remove trailing whitespace in same files.
|
|
336b375 Register daemon command line arguments to core if they're used in core (moneromooo-monero)
|
|
This fixes coretests, which does not register daemon specific arguments,
but uses core, which uses those arguments. Also gets rid of an unwanted
dependency on daemon code from core.
|
|
2c83055 net_node: add a --offline argument (moneromooo-monero)
|
|
It will not try to connect to the monero network, nor listen
|
|
Clear any partially loaded data, and start with a default config
|
|
|
|
m_blocked_ips now stores the unblocking time, rather than the
blocking time.
Also change > to >=, since banning for 0 seconds should not ban
|
|
With minor cleanup and fixes (spelling, indent) by moneromooo
|
|
|
|
upnpDiscover() takes a new argument for TTL.
Use the suggested default of 2.
|
|
Each thread can use the same resolver.
|
|
|
|
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
|
|
|
|
|
|
Looking at how these are called confirms this must have been a mistake
|
|
c44755a Build seed node list without duplicates (warptangent)
|
|
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes #231.
|
|
The random selection of a node shouldn't favor repeats that occur in the
hardcoded and DNS seed node lists.
Remove hardcoded ":18080" address which gives parse error.
Test: bitmonerod --log-level 2
The seed node list displayed at startup shouldn't show duplicate
addresses (includes port).
|
|
|
|
It's more user friendly that an error message saying the command
does not exist.
|
|
|
|
|
|
works for unit tests build, too
|
|
618f20c Network 1.7; Quieted the debug a bit. (rfree2monero)
391c7f9 Utils: use const, document dbg. Less default debug (rfree2monero)
44f4234 [fix] mac os x includes std::random... (rfree2monero)
162c993 Network 1.6: network limits, logging, +doxy (rfree2monero)
a3b2226 my changelog (rfree2monero)
2900b1e doxygen files (rfree2monero)
1489310 doxygen related tool (rfree2monero)
f9dba47 added windows_stream.* console colors (rfree2monero)
c511abf remerged; commands JSON. logging upgrade. doxygen (rfree2monero)
f79821a fix locking in count-peers thread (2) (rfree2monero)
0198ffb 2014 network limit 1.3 fix log/path/data +utils (rfree2monero)
ae2a506 2014 network limit 1.2 +utils +toc -doc -drmonero (rfree2monero)
0f06dca fixed size_t on windows (rfree2monero)
39fc63f removed not needed <netinet/in.h> (rfree2monero)
5ce4256 2014 network limit 1.1 +utils +toc -doc -drmonero (rfree2monero)
eabb519 2014 network limit 1.0a +utils +toc -doc -drmonero (rfree2monero)
|
|
Really really finall version of this changes I hope.
|
|
|
|
|
|
|
|
|
|
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
|
|
many RPC functions added by the daemonize changes
(and related changes on the upstream dev branch that were not merged)
were commented out (apart from return). Other than that, this *should*
work...at any rate, it builds, and that's something.
|
|
new update of the pr with network limits
more debug options:
discarding downloaded blocks all or after given height.
trying to trigger the locking errors.
debug levels polished/tuned to sane values.
debug/logging improved.
warning: this pr should be correct code, but it could make
an existing (in master version) locking error appear more often.
it's a race on the list (map) of peers, e.g. between closing/deleting
them versus working on them in net-limit sleep in sending chunk.
the bug is not in this code/this pr, but in the master version.
the locking problem of master will be fixed in other pr.
problem is ub, and in practice is seems to usually cause program abort
(tested on debian stable with updated gcc). see --help for option
to add sleep to trigger the error faster.
|
|
Update of the PR with network limits
works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)
more debug options
fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)
TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
|
|
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
|
|
Use copied value of seed node index during thread creation, not
reference.
- fixes segfault
Use boost::thread::try_join_until() instead of an atomic flag result
variable for each thread.
Add and handle interrupt for thread timeout.
- fixes segfault where a thread exceeds requested timeout and tries to
assign results to a referenced, but now out-of-scope, variable in
the main thread.
|
|
1b46226 std::atomic_flag has no copy/move constructor, can't have a vector (Thomas Winget)
df53c0a small typo in previous commit (Thomas Winget)
4a53898 DNS seed timeout and fallback (Thomas Winget)
|
|
|
|
|
|
|
|
|
|
|
|
also some other minor bug squashing and code formatting
|
|
|
|
Also implemented rudimentary IPv6 support, but commented it out because
it's not widely supported by ISPs for now, and thus is not currently
supported by Monero.
|
|
IPv4 and IPv6 name resolution working.
Unit tests written (and passing).
net_node.{h,inl} code modified to use DNS seeds.
|
|
On 32-bit MinGW-w64, time_t is int32_t. The existing code was serializing
time_t directly and implicitly assuming that time_t is int64_t. This commit
formalizes that assumption by serializing int64_t directly and casting to
time_t where appropriate.
Thanks go to greatwolf for reporting this issue.
monero-project/bitmonero#88
|
|
|
|
Also removed useless bool return
|
|
|
|
|
|
|
|
|
|
Source: cryptonotefoundation
|
|
|
|
|
|
|
|
|
|
|
|
Per my reading this change makes sense since a subset of the exclusive
peers could be priority peers. Priority peers that are not exclusive
will not get loaded, and priority peers that *are* exclusive will get
special treatment. Prior to this change it looks like priority peers
were silently ignored when exclusive peers were provided.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
