Age | Commit message (Collapse) | Author | Files | Lines |
|
It was using the raw block weight median, which was not what was
intended in ArticMine's design
|
|
8330e77 monerod can now sync from pruned blocks (moneromooo-monero)
|
|
If the peer (whether pruned or not itself) supports sending pruned blocks
to syncing nodes, the pruned version will be sent along with the hash
of the pruned data and the block weight. The original tx hashes can be
reconstructed from the pruned txes and theur prunable data hash. Those
hashes and the block weights are hashes and checked against the set of
precompiled hashes, ensuring the data we received is the original data.
It is currently not possible to use this system when not using the set
of precompiled hashes, since block weights can not otherwise be checked
for validity.
This is off by default for now, and is enabled by --sync-pruned-blocks
|
|
Support RandomX PoW algorithm
|
|
Some custom wallet code apparently ignores this, which causes users
of that code to be fingerprinted
|
|
26072f1 blockchain: forbid v1 coinbase from v12 (moneromooo-monero)
555dc7c core: from v12, require consistent ring size for mixable txes (moneromooo-monero)
d22dfb7 blockchain: reject rct signatures in coinbase txes from v12 (moneromooo-monero)
|
|
|
|
We're supposed to have a fixed ring size now
Already checked by MLSAG verification, but here seems more intuitive
|
|
|
|
a182df2 Bans for RPC connections (hyc)
|
|
|
|
Make bans control RPC sessions too. And auto-ban some bad requests.
Drops HTTP connections whenever response code is 500.
|
|
|
|
Use the actual block weight limit, assuming that weight is always
greater or equal to size
|
|
eef164f7 cryptonote_protocol_handler: search for syncing peers in "cruise mode" (moneromooo-monero)
|
|
|
|
123fc2a2 i2p: initial support (Jethro Grassie)
|
|
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
|
|
When all our outgoing peer slots are filled, we cycle one peer at
a time looking for syncing peers until we have at least two such
peers. This brings two advantages:
- Peers without incoming connections will find more syncing peers
that before, thereby strengthening network decentralization
- Peers will have more resistance to isolation attacks, as they
are more likely to find a "good" peer than they were before
|
|
|
|
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
|
|
b6534c40 ringct: remove unused senderPk from ecdhTuple (moneromooo-monero)
7d375981 ringct: the commitment mask is now deterministic (moneromooo-monero)
99d946e6 ringct: encode 8 byte amount, saving 24 bytes per output (moneromooo-monero)
cdc3ccec ringct: save 3 bytes on bulletproof size (moneromooo-monero)
f931e16c add a bulletproof version, new bulletproof type, and rct config (moneromooo-monero)
|
|
This makes it easier to modify the bulletproof format
|
|
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
|
|
|
|
|
|
This reverts commit 79d46c4d551a9b1261801960095bf4d24967211a, reversing
changes made to c9fc61dbb56cca442c775faa2554a7460879b637.
|
|
|
|
|
|
|
|
config::testnet::X : stagenet ? config::stagenet::X : config::X
|
|
|
|
|
|
|
|
* src/cryptnote_config.h: The constant `config::testnet::GENESIS_TX` was
changed to be the same as `config::GENESIS_TX` (the mainnet's transaction)
because the mainnet's transaction was being used for both networks.
* src/cryptonote_core/cryptonote_tx_utils.cpp: The `generate_genesis_block` function
was ignoring the `genesis_tx` parameter, and instead it was using the `config::GENESIS_TX`
constant. That's why the testnet genesis transaction was changed. Also five lines of unused
code were removed.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
|
|
|
|
|
|
|
|
|
|
7adceee6 precomputed block hashes are now in blocks of N (currently 256) (moneromooo-monero)
|
|
|
|
7f2f6ee1 protocol: remove hop count on block propagation (moneromooo-monero)
|
|
This shaves a lot of space off binaries
|
|
It is unused, as it was apparently a future optimization,
and it leaks some information (though since pools publish
thei blocks they find, that amount seems small).
|
|
Structured {de-,}serialization methods for (many new) types
which are used for requests or responses in the RPC.
New types include RPC requests and responses, and structs which compose
types within those.
# Conflicts:
# src/cryptonote_core/blockchain.cpp
|
|
|
|
With the new sync algorithm, the network overhead will be masked
as the thread adding blocks isn't interrupted by network calls
anymore. This should reduce memory usage a lot during sync.
|
|
8277e67f Add anchor connections (Miguel Herranz)
|
|
Minimum mixin 4 and enforced ringct is moved from v5 to v6.
v5 is now used for an increased minimum block size (from 60000
to 300000) to cater for larger typical/minimum transaction size.
The fee algorithm is also changed to decrease the base per kB
fee, and add a cheap tier for those transactions which we do
not care if they get delayed (or even included in a block).
|
|
|
|
|
|
Based on https://eprint.iacr.org/2015/263.pdf 4. Anchor connections.
Peer list serialisation version bumped to 5.
|
|
|
|
d61bd81 add lightweight block propagation ("fluffy blocks") (Dion Ahmetaj)
|
|
Added a new command to the P2P protocol definitions to allow querying for support flags.
Implemented handling of new support flags command in net_node. Changed for_each callback template to include support flags. Updated print_connections command to show peer support flags.
Added p2p constant for signaling fluffy block support.
Added get_pool_transaction function to cryptnote_core.
Added new commands to cryptonote protocol for relaying fluffy blocks.
Implemented handling of fluffy block command in cryptonote protocol.
Enabled fluffy block support in node initial configuration.
Implemented get_testnet function in cryptonote_core.
Made it so that fluffy blocks only run on testnet.
|
|
The fee will vary based on the base reward and the current
block size limit:
fee = (R/R0) * (M0/M) * F0
R: base reward
R0: reference base reward (10 monero)
M: block size limit
M0: minimum block size limit (60000)
F0: 0.002 monero
Starts applying at v4
|
|
|
|
The wallet will start using that fee about two weeks after hard
fork 3, when most people will likely have updated their daemons.
|
|
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
|
|
Some of it uses hardcoded height, which will need some thinking
for next (voted upon) fork.
|
|
|
|
|
|
With minor cleanup and fixes (spelling, indent) by moneromooo
|
|
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
|
|
version 2
|
|
The wallet and the daemon applied different height considerations
when selecting outputs to use. This can leak information on which
input in a ring signature is the real one.
Found and originally fixed by smooth on Aeon.
|
|
The small leftover is carried forward
|
|
|
|
|
|
1b46226 std::atomic_flag has no copy/move constructor, can't have a vector (Thomas Winget)
df53c0a small typo in previous commit (Thomas Winget)
4a53898 DNS seed timeout and fallback (Thomas Winget)
|
|
|
|
|
|
|
|
denominations based on DEFAULT_DUST_THRESHOLD, document fee arg to create_transactions as unused, se DEFAULT_DUST_THRESHOLD for wallet dust collection instead of calcualted tx fee
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|