Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
b3a9a4d add a quick early out to get_blocks.bin when up to date (moneromooo-monero)
2899379 daemon, wallet: new pay for RPC use system (moneromooo-monero)
ffa4602 simplewallet: add public_nodes command (moneromooo-monero)
|
|
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.
This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo
This has some advantages:
- incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
- incentive to run your own node instead of using a third party's, thereby promoting decentralization
- decentralized: payment is done between a client and server, with no third party needed
- private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
- no payment occurs on the blockchain, so there is no extra transactional load
- one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
- no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
- Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
- no large credit balance maintained on servers, so they have no incentive to exit scam
- you can use any/many node(s), since there's little cost in switching servers
- market based prices: competition between servers to lower costs
- incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
- increases network security
- helps counteract mining pools' share of the network hash rate
- zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner
And some disadvantages:
- low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
- payment is "random", so a server might go a long time without a block before getting one
- a public node's overall expected payment may be small
Public nodes are expected to compete to find a suitable level for
cost of service.
The daemon can be set up this way to require payment for RPC services:
monerod --rpc-payment-address 4xxxxxx \
--rpc-payment-credits 250 --rpc-payment-difficulty 1000
These values are an example only.
The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.
The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).
There are three new settings in the wallet:
- credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.
- auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25
- persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.
To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.
The wallet has a few new commands too:
- start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
- stop_mining_for_rpc: stop mining to acquire more credits
- rpc_payments: display information about current credits with
the currently selected daemon
The node has an extra command:
- rpc_payments: display information about clients and their
balances
The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
|
|
9f3be3b epee: use SO_REUSEADDR on non-Windows targets (xiphon)
|
|
|
|
23ba69e epee: fix SSL server handshake, run_one() can block, use poll_one() (xiphon)
|
|
1080136 abstract_tcp_server2: move 'Trying to connect' from error to debug (moneromooo-monero)
|
|
be82c40 Support median block size > 4 GB (moneromooo-monero)
|
|
add a 128/64 division routine so we can use a > 32 bit median block
size in calculations
|
|
|
|
e48dcb7 levin: armour against some 'should not happen' case (moneromooo-monero)
|
|
If adding a response handler after the protocol is released,
they could never be cancelled again, and would end up keeping
a ref that never goes away
|
|
c9cfbf7 epee: tcp server - set SO_LINGER instead of SO_REUSEADDR option (xiphon)
|
|
4b654f6 abstract_tcp_server2: log pointer, not contents, where appropriate (moneromooo-monero)
|
|
and fix the message grammar
|
|
24473d7 build: fix MinGW GUI dependencies build (xiphon)
|
|
4371791 epee: implement handshake timeout for SSL connections (xiphon)
|
|
7d81850 epee: fix network timeouts in blocked_mode_client (xiphon)
|
|
|
|
1b91beb abstract_tcp_server2: fix lingering connections (moneromooo-monero)
|
|
Coverity fixes [3a81639, 1bd962d, 2825f07, d099658, d46f701, cd57a10] (anonimal)
|
|
|
|
|
|
use mfatal/merror/mwarning/minfo/mdebug/mtrace
|
|
ab2819a depends: attempt to fix readline (iDunk5400)
|
|
|
|
|
|
As a side effect, colouring on Windows should now work
regardless of version
|
|
73f22c4 depends: fix MacOS build with Clang 3.7.1 (vtnerd)
|
|
Resetting the timer after shutdown was initiated would keep
a reference to the object inside ASIO, which would keep the
connection alive until the timer timed out
|
|
|
|
The problem actually exists in two parts:
1. When sending chunks over a connection, if the queue size is
greater than N, the seed is predictable across every monero node.
>"If rand() is used before any calls to srand(), rand() behaves as if
it was seeded with srand(1). Each time rand() is seeded with the same seed, it
must produce the same sequence of values."
2. The CID speaks for itself: "'rand' should not be used for security-related
applications, because linear congruential algorithms are too easy to break."
*But* this is an area of contention.
One could argue that a CSPRNG is warranted in order to fully mitigate any
potential timing attacks based on crafting chunk responses. Others could argue
that the existing LCG, or even an MTG, would suffice (if properly seeded). As a
compromise, I've used an MTG with a full bit space. This should give a healthy
balance of security and speed without relying on the existing crypto library
(which I'm told might break on some systems since epee is not (shouldn't be)
dependent upon the existing crypto library).
|
|
Make readline actually compile, and make ncurses use existing terminfo data (if available).
|
|
|
|
|
|
IP addresses are stored in network byte order even on little
endian hosts
|
|
|
|
|
|
IPv4 addresses are kept in network byte order in memory
|
|
2a41dc0 epee: fix connections not being properly closed in some instances (moneromooo-monero)
|
|
bdcdb0e Remove unused code under WINDWOS_PLATFORM guard (tomsmeding)
a84aa04 syncobj.h no longer defines shared_guard, so remove those define's (tomsmeding)
|
|
1a367d6 simplewallet: lock console on inactivity (moneromooo-monero)
|
|
|
|
The removed preprocessor macro's refer to types that are not defined in
the file anymore; the only other place where shared_guard is defined is
in winobj.h, which also defines the same macro's. Therefore, this change
is safe.
(Side note is that these macro's weren't used at all anyway, but that is
orthogonal to the issue.)
|
|
|
|
Fixed by Fixed by crCr62U0
|
|
|
|
fcbf7b3 p2p: propagate out peers limit to payload handler (moneromooo-monero)
098aadf p2p: close the right number of connections on setting max in/out peers (moneromooo-monero)
|
|
a182df2 Bans for RPC connections (hyc)
|
|
This code has been present, unchanged, ever since the original move to
github in 2014 with commit 296ae46ed.
|
|
new cli options (RPC ones also apply to wallet):
--p2p-bind-ipv6-address (default = "::")
--p2p-bind-port-ipv6 (default same as ipv4 port for given nettype)
--rpc-bind-ipv6-address (default = "::1")
--p2p-use-ipv6 (default false)
--rpc-use-ipv6 (default false)
--p2p-require-ipv4 (default true, if ipv4 bind fails and this is
true, will not continue even if ipv6 bind
successful)
--rpc-require-ipv4 (default true, description as above)
ipv6 addresses are to be specified as "[xx:xx:xx::xx:xx]:port" except
in the cases of the cli args for bind address. For those the square
braces can be omitted.
|
|
9a6006b abstract_tcp_server2: move some things out of a lock (moneromooo-monero)
|
|
6abaaaa remove obsolete save_graph skeleton code (moneromooo-monero)
|
|
f61a315 net_utils: fix m_ssl type from time_t to bool (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
Make bans control RPC sessions too. And auto-ban some bad requests.
Drops HTTP connections whenever response code is 500.
|
|
NULL is valid when size is 0, but memcpy uses nonnull attributes,
so let's not poke the bear
|
|
|
|
Reported by guidov
|
|
b0a04f7 epee: fix SSL autodetect on reconnection (xiphon)
|
|
|
|
GCC wants operator= aand copy ctor to be both defined, or neither
|
|
|
|
9a7a453 net_ssl: free certs after setting them up (moneromooo-monero)
|
|
b8b957d cmake: fix incorrect hint for OPENSSL_ROOT_DIR (moneromooo-monero)
367bb80 mlog: default to not showing SSL errors (moneromooo-monero)
|
|
The lock is meant for the network throttle object only,
and this should help coverity get unconfused
|
|
|
|
|
|
|
|
a62e0725 net_ssl: SSL config tweaks for compatibility and security (moneromooo-monero)
|
|
a4c4a2d8 blockchain: keep a rolling long term block weight median (moneromooo-monero)
|
|
add two RSA based ciphers for Windows/depends compatibility
also enforce server cipher ordering
also set ECDH to auto because vtnerd says it is good :)
When built with the depends system, openssl does not include any
cipher on the current whitelist, so add this one, which fixes the
problem, and does seem sensible.
|
|
|
|
|
|
SHA1 is too close to bruteforceable
|
|
9956500d net_helper: clear recv buffer on eof (moneromooo-monero)
|
|
edbae2d0 levin_protocol_handler_async: tune down preallocation a fair bit (moneromooo-monero)
|
|
|
|
It can allocate a lot when getting a lot of connections
(in particular, the stress test on windows apparently pushes
that memory to actual use, rather than just allocated)
|
|
|
|
|
|
b18f0b10 wallet: new --offline option (moneromooo-monero)
|
|
61d63900 net_helper: avoid unnecessary memcpy (moneromooo-monero)
|
|
It will avoid connecting to a daemon (so useful for cold signing
using a RPC wallet), and not perform DNS queries.
|
|
|
|
When closing connections due to exiting, the IO service is
already gone, so the data exchange needed for a gracious SSL
shutdown cannot happen. We just close the socket in that case.
|
|
|
|
displays total sent and received bytes
|
|
If `--daemon-ssl enabled` is set in the wallet, then a user certificate,
fingerprint, or onion/i2p address must be provided.
|
|
An override for the wallet to daemon connection is provided, but not for
other SSL contexts. The intent is to prevent users from supplying a
system CA as the "user" whitelisted certificate, which is less secure
since the key is controlled by a third party.
|
|
This allows "chain" certificates to be used with the fingerprint
whitelist option. A user can get a system-ca signature as backup while
clients explicitly whitelist the server certificate. The user specified
CA can also be combined with fingerprint whitelisting.
|
|
The former has the same behavior with single self signed certificates
while allowing the server to have separate short-term authentication
keys with long-term authorization keys.
|
|
If the verification mode is `system_ca`, clients will now do hostname
verification. Thus, only certificates from expected hostnames are
allowed when SSL is enabled. This can be overridden by forcible setting
the SSL mode to autodetect.
Clients will also send the hostname even when `system_ca` is not being
performed. This leaks possible metadata, but allows servers providing
multiple hostnames to respond with the correct certificate. One example
is cloudflare, which getmonero.org is currently using.
|
|
If SSL is "enabled" via command line without specifying a fingerprint or
certificate, the system CA list is checked for server verification and
_now_ fails the handshake if that check fails. This change was made to
remain consistent with standard SSL/TLS client behavior. This can still
be overridden by using the allow any certificate flag.
If the SSL behavior is autodetect, the system CA list is still checked
but a warning is logged if this fails. The stream is not rejected
because a re-connect will be attempted - its better to have an
unverified encrypted stream than an unverified + unencrypted stream.
|
|
Using `verify_peer` on server side requests a certificate from the
client. If no certificate is provided, the server silently accepts the
connection and rejects if the client sends an unexpected certificate.
Adding `verify_fail_if_no_cert` has no affect on client and for server
requires that the peer sends a certificate or fails the handshake. This
is the desired behavior when the user specifies a fingerprint or CA file.
|
|
|
|
Currently a client must provide a certificate, even if the server is
configured to allow all certificates. This drops that requirement from
the client - unless the server is configured to use a CA file or
fingerprint(s) for verification - which is the standard behavior for SSL
servers.
The "system-wide" CA is not being used as a "fallback" to verify clients
before or after this patch.
|
|
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.
This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
|
|
1569776a Add missing include (Leon Klingele)
|
|
dffdccdc No longer use deprecated RSA_generate_key in favor of RSA_generate_key_ex (Martijn Otto)
|
|
59776a64 epee: some more minor JSON parsing speedup (moneromooo-monero)
|
|
c23ea796 New interactive daemon command 'print_net_stats': Global traffic stats (rbrunner7)
|
|
43042a28 Implement array_entry_t copy constructor (Guido Vranken)
|
|
|
|
RSA_generate_key_ex
|
|
|
|
|
|
6ef816de console_handler: print newline on EOF (moneromooo-monero)
|
|
|
|
16590294 abstract_tcp_server2: fix crashy race on socket shutdown (moneromooo-monero)
|
|
9141a0a1 connection_basic: remove debug exception ^_^ (moneromooo-monero)
|
|
get_io_service was deprecated, and got removed
|
|
|
|
Manually initialize the array_entry_t iterator to ensure it points
to the correct m_array, thereby preventing a potential use-after-free
situation.
Signed-off-by: Guido Vranken <guidovranken@gmail.com>
|
|
1f2930ce Update 2019 copyright (binaryFate)
|
|
This avoids the annoying case where the shell prints its prompt
after the last line from Monero output, causing line editing to
sometimes go wonky, for lack of a better term
|
|
- pkey gets deleted by the pkey_deleter but the caller tries to serialize it which causes errors as the memory is freed
|
|
|
|
Use SSL API directly, skip boost layer
|
|
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
|
|
4d3b61a3 Use io_service::work in epee tcp server (Lee Clagett)
|
|
7af4fbd4 epee: Add space after ':' in additional http response headers (Tom Smeding)
|
|
c0e9e805 Fixed missing return value in once_a_time class on windows (Markus Behm)
|
|
1eef0565 performance_tests: better stats, and keep track of timing history (moneromooo-monero)
|
|
7c3ade44 network_throttle: use circular_buffer where appropriate (moneromooo-monero)
|
|
123fc2a2 i2p: initial support (Jethro Grassie)
|
|
|
|
|
|
|
|
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
|
|
|
|
|
|
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
|
|
|
|
ca86ef1b readline: don't dereference possible NULL pointer (Jethro Grassie)
|
|
|
|
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
|
|
|
|
Number matching semantics are slightly changed: since this is used
as a filter to check whether a number is signed and/or floating
point, we can speed this up further. strto* functions are called
afterwards and will error out where necessary. We now also accept
numbers like .4 which were not accepted before.
The strto* calls on a boost::string_ref will not access unallocated
memory since the parsers always stop at the first bad character,
and the original string is zero terminated.
in arbitrary time measurement units for some arbitrary test case:
match_number2: 235 -> 70
match_word2: 330 -> 108
|
|
b82efa32 epee: speed up json parsing (moneromooo-monero)
|
|
a5ffc2d5 Remove boost::lexical_cast for uuid and unused uuid function (Lee Clagett)
|
|
85665003 epee: better network buffer data structure (moneromooo-monero)
|
|
b21a60ef mlocker: set default log category (moneromooo-monero)
|
|
68f045de easylogging++: check allowed categories before logging (moneromooo-monero)
|
|
5464725a protocol: change standby mode to not wait sleeping (moneromooo-monero)
85807dfb add a once_a_time_milliseconds class (moneromooo-monero)
|
|
a13eb0a1 epee: speed up string matching a bit (moneromooo-monero)
3a3858dc epee: avoid string allocation when parsing a pod from string (moneromooo-monero)
|
|
0e2f5cb perf_timer: make all logs Info level (moneromooo-monero)
|
|
3cf85f0 Changed RECIEVED to RECEIVED in log messages. (normoes)
|
|
707c2f8 Remove -Werror (moneromooo-monero)
|
|
|
|
avoids pointless allocs and memcpy
|
|
|
|
ab783b17 easylogging++: ensure logger is initialized before main (moneromooo-monero)
9b69a0ae daemon: print monero version at startup when calling a detached daemon (moneromooo-monero)
4d71d463 mlocker: remove early page size log (moneromooo-monero)
|
|
and make them not default at log level 1
|
|
|
|
|
|
|
|
|
|
|
|
40485a73 mlocker: fix access to global lock map after dtor on exit (moneromooo-monero)
|
|
9c923bad epee: fix network packet header field endianness (moneromooo-monero)
ec1a62b5 move int-util.h to epee (moneromooo-monero)
|
|
96e6b439 blockchain_stats: don't use gmtime_r on Windows (moneromooo-monero)
|
|
1132436f Only show a single mlock() error, to avoid flooding the log (Martijn Otto)
|
|
23829ebb mlocker: don't throw from lock/unlock (moneromooo-monero)
|
|
|
|
|
|
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
|
|
2b3595d0 various: do not propagate exception through dtor (moneromooo-monero)
|
|
b36353e2 unit_tests: add some hex parsing test for non hex input (xiphon)
6671110c unit_tests: add a test for parse_hexstr_to_binbuff (moneromooo-monero)
f6187cd8 epee: speed up parse_hexstr_to_binbuff a little (Howard Chu)
|
|
|
|
It comes before the logger is initialized, so gets displayed
even though it should not be by default, and apparenly comes
too early for (some versions of) Android, where it crashes.
|
|
|
|
7c298f5d No longer use a list for registering self references in the abstract tcp server (Martijn Otto)
|
|
|
|
as the lock, it now leaks
|
|
In some cases, it doesn't like it (I don't know the details).
Factor into a new epee function
|
|
This prevents exceptions from showing up in various awkward
places such as dtors, since the only exception that can be
thrown is a lock failure, and nothing handles a lock failure
anyway.
|
|
It is an annoying piece of garbage
|
|
b620443b epee: log HTTP/RPC calls at info level (moneromooo-monero)
|
|
0cfd2ae5 mlocker: fix dtor ordering problem (moneromooo-monero)
|
|
741e4a11 epee: speed up json number parsing (moneromooo-monero)
|
|
|
|
|
|
Coverity 189689, 189690, 189692, 189695
|
|
157054b8 hardfork: initialize current_fork_index in ctor (moneromooo-monero)
2362baf7 network_throttle: initialize m_last_sample_time in ctor (moneromooo-monero)
d9400f69 serializtion: add missing mainnet and stagenet fields for 0mq (moneromooo-monero)
cbe0122b wallet2: initialize amount to 0 in tx_scan_info_t ctor (moneromooo-monero)
|
|
server
Updated assert message
Use a local variable that won't destruct at the end of the if-branch
Updated comment
|
|
f067bb0c tests: fix MSYS2 warning 'MONERO_DEFAULT_LOG_CATEGORY redefined' (xiphon)
|
|
07c62809 epee: some minor speedup in parsing (moneromooo-monero)
|
|
3381b651 abstract_tcp_server2: fix busy calling of idle IO service (moneromooo-monero)
|
|
It's useful info to have when investigating logs
|
|
leak the mutex instead, it's a one off
|
|
|
|
Coverity 136593
|
|
|