| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
This avoids using libunwind, which often causes trouble.
|
|
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
|
|
d561f4ad enable clang checks that were disabled (Chris Vickio)
0aefb2f6 remove std::move from return statements (pessimizing-move warning) (Chris Vickio)
629d5b76 change counter from bool to int (deprecated-increment-bool warning) (Chris Vickio)
fb76d439 add extra braces around subobjects (missing-braces warning) (Chris Vickio)
3b6d5f25 make struct/class declarations consistent (mismatched-tags warning) (Chris Vickio)
fcf66925 remove unused fields from network_throttle (unused-private-field warning) (Chris Vickio)
296f8c16 inline unused function (for unused-function warning) (Chris Vickio)
|
|
|
|
|
|
80abc3bc Build wallet with Android NDK (MoroccanMalinois)
|
|
|
|
See: https://cmake.org/cmake/help/v3.0/policy/CMP0042.html
|
|
- It builds but no further testing has been done.
|
|
|
|
|
|
|
|
344e96c remove check for certain clang versions (Dan Miller)
b73bed2 Don't define stdc++ on FreeBSD (Dan Miller)
|
|
|
|
|
|
|
|
|
|
06bb692 cmake: support BUILD_SHARED_LIBS built-in option (redfish)
e1c7af3 cmake: transitive deps and remove deprecated LINK_* (redfish)
54010b9 crypto: armv7: slow-hash: remove redundant source include (redfish)
|
|
Support building internal libraries as shared. This reduces
development time by eliminating the need to re-link all
binaries every time non-interface code in the library changes.
Instead, can hack on libxyz, then `make libxyz`, and re-run
monerod.
By default BUILD_SHARED_LIBS is OFF in release build type,
and ON in debug build type, but can be overriden with -D.
|
|
|
|
|
|
|
|
It's only blank only if somebody running cmake in MSYS/MinGW (Windows)
manually forgets to add -D ARCH, but when it is blank, without quotes
those lines are invalid cmake syntax.
|
|
Those are always set, no point in checking. #1065
|
|
|
|
0f94f61 cmake: handle dists which prefix gcc binaries wth arch triplet (redfish)
|
|
77fa663 cmake: split BUILD_GUI_DEPS option into two (redfish)
|
|
|
|
The split is to make this software more packageable. 'make install'
is used by the package building scripts, and should not be installing
vendored dependencies onto the system.
|
|
|
|
|
|
Issue #1026
|
|
Adds 64-bit ARMv8 handling to CMakeLists.txt and implements GCC flags for two errata on the Cortex-A53 present on every chip in revision 0:
https://developer.arm.com/docs/epm048406/latest/arm-processor-cortex-a53-mpcore-product-revision-r0-software-developers-errata-notice
835769 affects 64-bit multiply accumulate
843419 affects internal page addressing
Rewritten to build on @radfish's changes
Updated to address @radfish's points
|
|
Lets 'cmake .. && make' be sufficient to build.
|
|
1c7d3b0 cmake: define ARM var for all ARM arch variants (redfish)
6fe543d cmake: ARM: exclude libunwind in static build (redfish)
397b720 make: remove NO_AES from arm targets (redfish)
57ca3f3 make: make the ARM release targets statically linked (redfish)
43c07a1 readme: editted install/build instructions for clarity (redfish)
a0d4058 Revert "makefile: remove unnecessary ARM-specific targets" (redfish)
c2bc34b Revert "Interpret x86_64 as x86-64 for architecture" (redfish)
c54b9a1 cmake: don't set ARCH from CMAKE_SYSTEM_PROCESSOR (redfish)
|
|
94de4b0 cmake: pass -static when STATIC=ON on Windows (redfish)
|
|
f1ba51c remove -Wall from coverage arguments (Jacob Torrey)
f017fec Build the core_tests under Travis (Jacob Torrey)
e0bf02a Streamline release-test target (Jacob Torrey)
baf4574 Update badge to point to monero's coveralls (Jacob Torrey)
d1dc2c3 Re-enable Travis IRC notifications (Jacob Torrey)
9c71b9e Silence coveralls to prevent 4MB logs (Jacob Torrey)
65041fb Disabled libwallet_api_test until Issue #895 resolved (Jacob Torrey)
a450138 Disable core_tests on Travis-CI (Jacob Torrey)
650afac Added -j2 to Makefile and clean up matrix (Jacob Torrey)
256dec0 Streamline test building target (Jacob Torrey)
14915c2 Ensure tests are built prior to testing (Jacob Torrey)
fe4992b Added coverage g++ commands (Jacob Torrey)
497b24f Update .travis.yml (Jacob Torrey)
678467d Update for the current make environment (Jacob Torrey)
abcac26 Fixed tab/space issue on YAML (Jacob Torrey)
7351a11 Converted to a build matrix for testing and release (Jacob Torrey)
342dbfb Prep for coveralls (Jacob Torrey)
|
|
|
|
This is refactoring only. No behavior change.
|
|
Else error in build with STATIC=ON:
cd /home/redfish/bitmonero/build/release/src/miner && /usr/bin/cmake -E
cmake_link_script CMakeFiles/simpleminer.dir/link.txt --verbose=1
/usr/bin/c++ -std=c++11 -D_GNU_SOURCE -Wall -Wextra -Wpointer-arith
-Wundef -Wvla -Wwrite-strings -Wno-error=extra
-Wno-error=deprecated-declarations -Wno-unused-parameter
-Wno-unused-variable -Wno-error=unused-variable -Wno-error=undef
-Wno-error=uninitialized -Wlogical-op -Wno-error=maybe-uninitialized
-Wno-reorder -Wno-missing-field-initializers -march=armv7-a
-fno-strict-aliasing -mfloat-abi=hard -DNDEBUG -O2 -flto
-ffat-lto-objects -static-libgcc -static-libstdc++
-Wl,--wrap=__cxa_throw CMakeFiles/simpleminer.dir/simpleminer.cpp.o -o
../../bin/simpleminer -rdynamic -Wl,-Bstatic -lrt -Wl,-Bdynamic -ldl
../cryptonote_core/libcryptonote_core.a ../common/libcommon.a
-Wl,-Bstatic -lboost_filesystem -lboost_program_options -lboost_regex
-lboost_chrono -lboost_system -lboost_thread -Wl,-Bdynamic -pthread
-Wl,-Bstatic -lrt -Wl,-Bdynamic -ldl ../blockchain_db/libblockchain_db.a
../cryptonote_core/libcryptonote_core.a
../blockchain_db/libblockchain_db.a
../../contrib/otshell_utils/libotshell_utils.a ../blocks/libblocks.a
../common/libcommon.a ../../external/unbound/libunbound.a -lssl -lcrypto
-lunwind -Wl,-Bstatic -lboost_program_options ../crypto/libcrypto.a
-lboost_date_time -lboost_serialization -lboost_filesystem
../../external/db_drivers/liblmdb/liblmdb.a -Wl,-Bdynamic -pthread
-Wl,-Bstatic -lboost_chrono -lboost_system -lboost_thread -lrt
-Wl,-Bdynamic -ldl
/usr/bin/ld: ../../bin/simpleminer: hidden symbol
`__aeabi_unwind_cpp_pr0' in
/usr/lib/gcc/armv7l-unknown-linux-gnueabihf/6.1.1/libgcc_eh.a(unwind-arm.o)
is referenced by DSO
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
|
|
This reverts commit 86234921506944dddab4e2f5edf96bf747be6c73.
Let's restrict ARCH to values accepted by -march to keep things clear
and consistent. ARCH is -march, with only one exception: a value of
"default" indicates to not pass -march at all.
|
|
It is not correct to do so, because ARCH should only take values
supported by the -march argument, with the exception of 'default'
which denotes not passing -march at all.
ARCH defines the target architecture for builds that are intended to be
portable to other machines.
|
|
This gets rid of bitmonerod.exe's dependecy on libwindpthreads-1.dll in build
on Windows on x86_64 (via MSYS2 default toolchain). With this patch all DLL
dependencies are on DLLs in c:\windows\system32.
|
|
|
|
Signed-off-by: Jacob Torrey <torreyj@ainfosec.com>
|
|
2a2b655 Build: make boost 1.58 minimum requirement. Fixes #956 (anonimal)
|
|
|
|
|
|
Also, minor cleanup of redundant flag-setting code.
|
|
|
|
The previous logic that used a COMMON_*_FLAGS intermediate variable
and then re-assigned CMAKE_*_FLAGS before including each subdirectory
was confusing and ugly. This PR is the right way to do it.
This commit is purely refactoring: built binaries unchanged.
|
|
By default the flag is enabled whenever libunwind is found on the
system, with the exception of static build on OSX (for which we can't
install the throw hook #932 due to lack of support for --wrap in OSX
ld64 linker).
|
|
This is an attempt to fix build with STATIC=ON on OSX (#932):
[ 95%] Linking CXX executable ../../bin/bitmonerod Undefined symbols for
architecture x86_64: "___real___cxa_throw", referenced from:
___wrap___cxa_throw in libcommon.a(stack_trace.cpp.o) ld: symbol(s) not found
for architecture x86_64
|
|
This fixes build of tests with STATIC=ON, which failed with:
/tmp/cc8lNtqY.ltrans12.ltrans.o: In function
`boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::thread_resource_error>
>::rethrow() const [clone .lto_priv.41]':
cc8lNtqY.ltrans12.o:(.text+0x4e): undefined reference to `__wrap___cxa_throw'
The hook is implemented in libcommon, which is not linked into some of the test
binaries. An alternative solution is to link all tests against libcommon,
but that seems worse because it introduces a false dependency (also,
I tried that and for some of the test binaries the linker still failed to
pick up the symol from libcommon, strangely.)
|
|
The tests currently issue a warning that
"warning: -fassociative-math disabled; other options take precedence"
The associative math optimization is turned on indirectly by -Ofast.
Apparently, the optimization is forced to be disabled, while compiling
test harnesses generated by Google Test framework.
Unfortunately, there is no -Wno-error=* flag to disable this warning
(see gcc --help=warnings).
An alternative to this patch is to disable the optimization explicitly
with -fno-associative-math, but that seems worse.
Another alternative is to not pass -Ofast for tests build, but we
want the tests to be built with exact same optimization flags as
the code being tested, otherwise the value of the tests is diminished.
Another alternative is to remove -Werror from the entire build, but
it's good to include that flag to preclude people leaving warnings.
A note regarding implementation of not passing -Werror for tests:
I considered filtering out -Werror from CMAKE_{C,CXX}_FLAGS but
that seems to be worse because it's surprizing behavior, to those
reading the code that adds -Werror. It is better to add it for
when it is used and not added otherwise. I also considered relying
on order, adding -Werror after inluding 'tests' subdir, but before
including the other subdirs, but that also seems cryptic to the
reader. So, I settled with the current solution, of explicitly
setting CMAKE_{C,CXX}_FLAGS to different values before including the
respective subdir.
Testing done: compared compiler invocation for non-tests source files
using `make VERBOSE=1` with and without this commit: the only difference
is the position of -Werror. So, this commit doesn't change the binary.
|
|
|
|
|
|
f07f120 cmake: don't try to link with atomic on Apple (redfish)
19349d7 cmake: ARM: clang: make warning non-fatal: inline asm (redfish)
f3e09f3 cmake: link with -latomic for clang (redfish)
f4b35ae cmake: include -ldl via cmake built-in var (redfish)
fa85cd8 common: stack trace: make clang happy with func ptrs (redfish)
4dce26b cmake: do not pass -stdlib=c++ to clang >=3.7 (redfish)
|
|
1e89f4f cmake: do not ignore dangerous warnings with -Wno-error (redfish)
|
|
-latomic is necessary with Clang on Linux, but
apparently, on OSX it's not found.
|
|
Clang issues a warning for some inline asm in stack_trace.cpp. This
patch ieaves the warning to be displayed as a reminder to fix
the code.
|
|
otherwise clang build fails with
../cryptonote_core/libcryptonote_core.a(miner.cpp.o): In function
`std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/usr/bin/../lib/gcc/i686-pc-linux-gnu/6.1.1/../../../../include/c++/6.1.1/bits/atomic_base.h:396:
undefined reference to `__atomic_load_8'
This has no effect on the gcc build.
The one strange thing is that test code like
std::atomic<int> x;
int main() { return x; }
compiles and links without errors with clang, without -latomic. This
alone would suggest that this patch is unnecessary, but that is not the
case. It's not clear exactly why, though. The bitmonero code is
including the same header, but it must be doing something more complex
than in this test code snippet that causes the failure at link time
pasted above. In any case, passing -latomic fixes the problem and
seems safe.
.
|
|
This does two things:
1. fixes clang build, which otherwise errors with undefined symbol
'dlsym'.
2. simplifies the cmake script, delegating to cmake to figure
out platform-specific flags for linking against the dl library.
|
|
Tested on Linux (Arch) with clang 3.7 and 3.8 i686 and ARM:
if -stdlib=c++ is passed to clang, then the build errors
out with <string>,<iostrea>,etc. headers not found. Simply
not passing the arg fixes the problem.
**NOTE**: not tested on OSX.
|
|
Shorten the list of warnings that are reported, but
which are forced to NOT generate an error, via -Wno-error.
Unwhitelist these: strict-aliasing, sign-compare, type-limits
For example, ignoring strict-aliasing warning caused
lots of wasted time diagnosing Issue #847.
|
|
This patch is a temprorary workaround until aliasing is fixed in the
code (Issue #847).
|
|
ecd0f2d makefile: remove unnecessary ARM-specific targets (redfish)
c650160 cmake: disable AES on ARM (redfish)
804b1bc cmake: initialize ARCH for native builds (redfish)
bb39034 cmake: remove repetitive code in handling of NO_AES (redfish)
|
|
d718960 remove POSIX_C_SOURCE and remove dlfcn.h for static builds (luigi1111)
|
|
|
|
On ARM, gcc fails with 'unknown argument' if passed '-maes'.
|
|
We need ARCH, because it needs to be set for ARM7, ARM6 to be
initialized.
Strangely, on different machines (both ARMv7, Arch), ${ARCH}
var is either empty or 'native'. Handle both cases.
|
|
Minor eefactor only. No behavior or interface change in this commit.
|
|
The former was a faulty "fix" for gmtime_r not existing on Windows. The latter is needed only for dynamic builds, and is not included with msys2, which ends up fine because Windows is only built static at this time.
|
|
03e545d More fixing for Windows (iDunk)
e8baa57 CMakeLists.txt: fix build for mingw (iDunk)
|
|
|
|
Fix from iDunk from IRC.
|
|
|
|
if libunwind is found.
Useful for debugging logs.
|
|
Ain't nobody got time for link/cmake skullduggery.
This reverts commit fff238ec94ac6d45fc18c315d7bc590ddfaad63d.
|
|
Useful for debugging users' logs
|
|
|
|
|
|
DL is empty and unused elsewhere.
The intention at one point may have been to use CMAKE_DL_LIBS, but that
would more likely apply in some situations involving static linking.
|
|
This allows the OpenSSL function checks to compile in unbound's CMake
configuration.
Otherwise, the functions SHA256() and EVP_sha512() won't be called from
libunbound as possible algorithms.
They had not been compiling because static OpenSSL libraries were being
used, along with lack of -ldl. The static library preference is
unnecessary for the checks, so use default suffixes ordering for
CMAKE_FIND_LIBRARY_SUFFIXES when building unbound.
Related files:
configure_checks.cmake
external/unbound/validator/val_secalgo.c
secalgo_ds_digest(), setup_key_digest()
|
|
Sample use:
BERKELEY_DB=0 make debug
This makes development with BlockchainLMDB easier when virtual methods
have changed and don't match BlockchainBDB.
|
|
|
|
|
|
|
|
|
|
|
|
flags were being accumulated instead of being set.
Win32 was getting -O2 -DNDEBUG -Ofast -DNDEBUG etc...
Also for Win32, stay compatible to WinXP
|
|
|
|
|
|
Remove trailing whitespace in same files.
|
|
|
|
*Thanks to luigi1111 for reporting.
|
|
CMake supports this through THREADS_PREFER_PTHREAD_FLAG.
Remove inclusion of pthread library in EXTRA_LIBRARIES, as the
individual CMakeLists.txt files which need pthread already require it
with CMAKE_THREAD_LIBS_INIT.
|
|
|
|
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
|
|
|
|
|
|
|
|
See eb565a1ce208c543392808559ddea709eb1c935b
|
|
|
|
library
|
|
|
|
New/updated Makefile targets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
There was a workaround for linking to boost at all on MINGW, but
unfortunately this workaround would not correctly link to boost
statically. This workaround for that workaround works around the issue
that that workaround had.
|
|
|
|
Also change LMDB Cmake variables to CACHE rather than upgrading them
through several parent scopes.
|
|
|
|
|
|
CMakeList as that is not part of standard Unbound
|
|
|
|
This reverts commit b21335642e75b35d3b178a754f4cdb2314989cd1.
|
|
Make Cmake things aware of BerkeleyDB and BlockchainBDB
Make the BlockchainDB unit tests aware of BlockchainBDB
|
|
|
|
Update of the PR with network limits
works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)
more debug options
fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)
TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
|
|
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
|
|
Usage:
default is lmdb for blockchain branch:
$ make release
same as:
$ DATABASE=lmdb make release
for original in-memory implementation:
$ DATABASE=memory make release
|
|
Merge branch 'monero-project/master' into blockchain
|
|
|
|
|
|
|
|
Working on Linux, needs verified for other platforms but should be fine.
|
|
update for rebase (warptangent 2015-01-04)
src/cryptonote_core/CMakeLists.txt (edit)
- replace LMDB_LIBRARIES with LMDB_LIBRARY set from autodetection
|
|
Some BlockchainDB unit testing fleshed out (and working), rudimentary
linker flag for lmdb in CMakeLists, but should probably be done
"correctly" at some point (find it on whatever system you're building on
and all that jazz).
update for rebase (warptangent 2015-01-04)
fix conflicts with upstream CMakeLists.txt files
tests/CMakeLists.txt (remove edits from original commit)
|
|
|
|
|
|
f1eaf88 Prints seed after wallet upgrade. Removed iostream include. (Oran Juice)
70971be Doxygen comments (Oran Juice)
031ca23 Rewrites to old wallet file correctly (Oran Juice)
1f833dc Doxygen comments in (Oran Juice)
0bd88ff Writes seed language while generating wallet. Wallet open fix. (Oran Juice)
09a659e Stores seed language in wallet file. added rapidjson. Yet to test backward compatibility (Oran Juice)
|
|
|
|
Unfortunately, this is necessary because CMake doesn't detect whether
mingw libraries are static or shared and doesn't put a -static flag around
the -lfoo argument which then makes the shared library be linked to.
|
|
This causes duplicate symbol errors on msys' mingw install.
|
|
There are Windows-related warnings turned into errors here.
|
|
This tells find_path and find_library to look under this directory first
which is what we want on msys2.
|
|
Older versions of CMake support LINK_{PUBLIC,PRIVATE} while newer
versions prefer PUBLIC and PRIVATE instead, but still support the LINK_
prefix.
|
|
pthread is handled by CMAKE_THREAD_LIBS_INIT while libdl isn't needed.
|
|
|
|
|
|
|
|
|
|
|
|
CMake will auto-dereference variable names in if statements, so there's
no need to dereference them manually.
|
|
|
|
The option was set twice when it only needs to be set once. Also fix a
bogus dereference and spurious whitespace.
|
|
CMAKE_BUILD_TYPE is meant for single-config build tools (e.g., make and
ninja) while CMAKE_CONFIGURATION_TYPES is meant for multi-config build
tools (e.g., Xcode and Visual Studio). They should not be mixed or
manually set.
|
|
Instead of using BoldRed and ColourReset everywhere, wrap it up in a
function.
|
|
compatibility
|
|
|
|
correctly finding static libs on various operating systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
As it turns out, some of CMake's built-in modules for detecting headers
and libraries don't work if you have certain compiler flags set, such as
-Werror=old-style-definition, as they do "int main()" rather than
"int main(void)". Having CMake search for libs before compiler flags
are set alleviates this issue, and I believe the underlying issue will
be fixed in future releases of CMake.
|
|
CMake config file written, but was unable to test/get it working
properly because of a bug in CMake with functions related to
find_package. Simple "-lunbound" flag used in its stead for now. May
not build on non-Linux systems, not sure yet.
|
|
|
|
|
|
|
|
|
|
The mingw toolchains override this for now.
|
|
This isn't currently working on mingw
|
|
|
|
This should link winpthreads. We really shouldn't be passing these this
way, but that seems to be the existing solution, and it works for now.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The previous code was assuming Apple == Clang. This change should both
enable LTO when using gcc on Apple and fix Clang when using it on other
platforms.
|
|
|
|
The new lto format requires use of the gcc-provided gcc-ar and
gcc-ranlib binaries.
|
|
|
|
|
|
1. Fixed build error on machines not supporting aes-ni.
|
