| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
9672ac0 Revert "re-re-add Windows DNS bug fix, per c0de96f" (Riccardo Spagni)
|
|
This reverts commit f4ba92bcccd3e016c6b5fdced079bf17d1b3f371.
|
|
7c4d6f1 simplewallet: Use default log file name when executable's file path is unknown (warptangent)
b5b0f08 epee: Don't set log file name when process path name isn't found (warptangent)
|
|
378d004 blockchain: mark two places where the new code differs from the old (moneromooo-monero)
73d42a7 blockchain: update cumulative size after block addition (moneromooo-monero)
4a44377 blockchain: remove dead code (moneromooo-monero)
3f9089a blockchain: do not try to add a tx the pool when it was nor taken out (moneromooo-monero)
769d5ef blockchain: fix off by 1 in timestamp median calculations (moneromooo-monero)
|
|
Default to "simplewallet.log" in current directory when file path isn't
obtained from epee.
In this situation previously, it defaulted to the file name of ".log"
("" + ".log") in the current directory.
(Thanks to @sammy007 for reporting bug.)
An earlier version yet used "" + "/" + ".log" = "/.log", which resulted
in silently not logging in most cases, due to lack of permission.
Test:
PATH=$PATH:</path/to/simplewallet/folder> && simplewallet --wallet-file /dev/null
This results in epee not finding the executable's file path, so
simplewallet will now use a default log filename.
|
|
If process path name isn't found, then leave log file name blank.
This also applies if a process name is found, but it's blank after
removing a trailing dot extension.
|
|
And I'd like a comment from tewinget or someone else
|
|
Block addition can fail, and the old code would not update the
cumulative size in that case.
|
|
|
|
This is an unintended difference from the old code. Though I don't
think it can actually happen in practice with the current take_tx
implementation.
|
|
The height function apparently used to return the index of
the last block, rather than the height of the chain. This now
seems to be incorrect, judging the the code, so we remove the
now wrong comment, as well as a couple +/- 1 adjustments
which now cause the median calculation to differ from the
original blockchain_storage version.
|
|
7424cfc net_node: Use DNS resolver singleton (warptangent)
|
|
471e8a3 blockchain_import: Add --input-file option (warptangent)
3ffda6e blockchain_import: Updates for naming consistency (warptangent)
|
|
Each thread can use the same resolver.
|
|
This option specifies the input file path for importing.
The default remains <data-dir>/export/blockchain.raw
|
|
|
|
97c5faa blockchain_export: Add --output-file argument (warptangent)
|
|
dde4dbb doc: hammer the fact that the raw file isn't blockchain.bin (moneromooo-monero)
|
|
This option will export to the specified file path.
The default file path remains <data-dir>/export/blockchain.raw
|
|
f4ba92b re-re-add Windows DNS bug fix, per c0de96f (Riccardo Spagni)
|
|
|
|
|
|
|
|
d87a2d2 core_rpc_server: replace vector<bool> with vector<int> in RPC (moneromooo-monero)
|
|
7764cd7 net_node: skimplify rate limit code, and log as appropriate (moneromooo-monero)
|
|
e7b00ab core_rpc_server: find transactions in the pool as well as the blockchain (moneromooo-monero)
|
|
aa5bc35 wallet: new rescan_spent command to update outputs' spent status (moneromooo-monero)
|
|
vector<bool> causes issues in serialization with Boost 1.56
|
|
|
|
This obsoletes the need for a lengthy blockchain rescan when
a transaction doesn't end up in the chain after being accepted
by the daemon, or any other reason why the wallet's idea of
spent and unspent outputs gets out of sync from the blockchain's.
|
|
|
|
e63b854 blockchain_db: match tx addition semantics to original code (moneromooo-monero)
83bbea4 Add a is_key_image_spent daemon command and RPC call (moneromooo-monero)
35abef1 blockchain: remove dead code (moneromooo-monero)
|
|
The original code removed key images from a tx from the blockchain
when an non to-key nor gen input was found in that tx. Additionally,
the remainder of the tx data was added to the blockchain only after
the double spend check passed.
|
|
|
|
|
|
533acc3 blockchain_db: store key images for tx without outputs too (moneromooo-monero)
|
|
4f19e68 blockchain: factor get_num_outpouts(amount) calls (moneromooo-monero)
275894c blockchain: always select random outs using triangular distribution (moneromooo-monero)
|
|
2634307 daemon: omit extra set of <> in error message (moneromooo-monero)
0822933 daemon: print a decoded tx in print_tx (moneromooo-monero)
1d678b1 daemon: fix print_tx not find transactions (moneromooo-monero)
|
|
a2d7a5f encrypted payment ids are now 64 bit, instead of 256 bit (moneromooo-monero)
e40cfc4 Encrypted payment IDs (moneromooo-monero)
|
|
525bf58 Fix estimation of batch storage size when no blocks exist (warptangent)
|
|
|
|
It has to stay constant as we get the blockchain lock for the
entire function. Avoids some unnecessary DB accesses.
|
|
It was only used by the older blockchain_storage.
We also move the code to the calling blockchain level, to avoid
replicating the code in every DB implementation. This also makes
the get_random_out method obsolete, and we delete it.
|
|
The string conversion already adds them
|
|
in addition to the raw hex representation
|
|
It was not even trying to
|
|
Pros:
- smaller on the blockchain
- shorter integrated addresses
Cons:
- less sparseness
- less ability to embed actual information
The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
|
|
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.
Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
|
|
If there's no blocks in database (m_height == 0):
Don't assign incorrect block range to check.
Skip average block size check.
Test:
Run blockchain_converter with an existing source blockchain.bin and
a non-existent LMDB destination database.
The converter creates a BlockchainLMDB instance with zero height, due to
not being initialized with a genesis block, normally done by
Blockchain::init(). While different than the behavior of bitmonerod,
blockchain_import, and blockchain_export, the initialization hasn't been
strictly necessary.
The db batch size estimation normally uses an average block size, or a
default minimum block size, whichever is greater. In this case, as
there's no existing blocks to check for an average block size, the
default should be used.
|
|
1e23b7a wallet: set watch-only flag to false when creating a new wallet (moneromooo-monero)
|
|
|
|
16d71a3 Fix block_reward unit tests (Rostislav)
|
|
|
|
1d1a77b slight modification to wordlist contributor tagline (as these contributors haven't used git to submit a PR, so we're creating the wordlist on their behalf (Riccardo Spagni)
ef7671a added Russian wordlist (Riccardo Spagni)
|
|
haven't used git to submit a PR, so we're creating the wordlist on their behalf
|
|
|
|
988fe1f wallet: new transaction construction algorithm (moneromooo-monero)
|
|
a49d917 change unique_prefix_length=4 for japanese.h (David Vorick)
|
|
I ran some tests, and all prefixes seem to be unique for len(3)
|
|
6d6a985 add Germany and Italian wordlists (Riccardo Spagni)
514047d fix portuguese wordlist (Riccardo Spagni)
b5c0308 fix license on English wordlist (Riccardo Spagni)
|
|
|
|
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.
Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.
Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.
To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
|
|
|
|
|
|
9b83a43 Update after recent simplewallet string changes (moneromooo-monero)
35378f1 simplewallet: fix context/string order mismatch (moneromooo-monero)
e62692f simplewallet: use unsigned long long instead of size_t in message (moneromooo-monero)
|
|
|
|
|
|
boost doesn't support %zu for size_t, and the previous change
to %u could technically lose bits (though it would require splitting
a transfer into 4 billion transactions, which seems unlikely).
|
|
8fe180a wallet: add boolean to always confirm transactions with the user (moneromooo-monero)
|
|
This can be useful if you want to be given a veto over the tx fee,
or if you want to see what a tx fee would be without actually sending.
|
|
3c13da5 boost doesn't like %zu for size_t, replace with %u (moneromooo-monero)
|
|
e027831 console_handler: do not call a NULL function pointer (moneromooo-monero)
b87e066 console_handler: check for eof before trying to use input (moneromooo-monero)
|
|
e20a4dd blockchain: fix testnet syncing (to not use blocks.dat) (moneromooo-monero)
|
|
70ae2ee Fixed threadpool bug when running on single core systems. *Thanks to freshman for reporting bug. (NoodleDoodleNoodleDoodleNoodleDoodleNoo)
464dbe7 Fixed MINGW duplicate library errors when MSYS folder cannot be found. *Thanks to luigi1111 for reporting. (NoodleDoodleNoodleDoodleNoodleDoodleNoo)
|
|
|
|
The exit_handler can be NULL.
|
|
We'll get there without input if we exited
|
|
These are mainnet blocks, and would cause syncing on testnet to
reject all incoming blocks.
|
|
*Thanks to freshman for reporting bug.
|
|
*Thanks to luigi1111 for reporting.
|
|
bbb936d Use g++ flag "-pthread" instead of "-lpthread", where preferred (warptangent)
|
|
CMake supports this through THREADS_PREFER_PTHREAD_FLAG.
Remove inclusion of pthread library in EXTRA_LIBRARIES, as the
individual CMakeLists.txt files which need pthread already require it
with CMAKE_THREAD_LIBS_INIT.
|
|
35b62fb hyc accidentally typo'd...we shall never speak of this again (Riccardo Spagni)
|
|
|
|
54c785d fixed ARM arch test to prevent breaking on short arch strings (Riccardo Spagni)
a4254a4 updated vl32 to current (Riccardo Spagni)
e6ab2df updated in-source lmdb (Riccardo Spagni)
ea08c76 open() flag O_DSYNC isn't on BSD, use O_SYNC (Thomas Winget)
|
|
|
|
|
|
|
|
If the detected OS is FreeBSD, tell LMDB to compile with
MDB_DSYNC=O_SYNC instead of the default O_DSYNC, as BSD does not
implement this flag.
|
|
71793ef Add batch support to BlockchainLMDB::get_output_key (warptangent)
|
|
This allows blockchain_import to work with batch and verify modes enabled
(the default).
|
|
Added option to cache tx-input verification results.
|
|
Fixed OSX compilation issues due to random lmdb resize points.
Fixed infinite loop bug when calling core::get_block_template(..).
|
|
|
|
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
|
|
Fix compilation error
|
|
- bugfix: prevent re-entering db->get when current buffer contains all possible index values.
|
|
|
|
|
|
|
|
ea58576 Add missing file - i18n.cpp (moneromooo-monero)
|
|
|
|
78b2eab Translatable strings for simplewallet (moneromooo-monero)
|
|
fd73d9c Check and resize if needed at batch transaction start (warptangent)
f9e4afd blockchain_utilities: Increase debug statement's log level (warptangent)
699e4b3 blockchain_utilities: Pass expected number of blocks when starting batch (warptangent)
6e170c8 Optionally allow DB to know expected number of blocks at batch transaction start (warptangent)
|
|
5d304ca Fix loop bug when calling core::get_block_template, causing calling thread to lock up. (NoodleDoodleNoodleDoodleNoodleDoodleNoo)
|
|
The system is mostly the Qt system, but we don't use Qt to avoid
the dependencies.
See README.i18n for details.
|
|
This currently only affects blockchain_import and blockchain_converter.
When the number of blocks expected for the batch transaction is
provided, make an estimate of the DB space needed. If not enough free
space remains, resize the DB.
The estimate is made based on:
- the average size of the last 500 blocks, or if larger, a min. block
size of 4k
- a factor for the expanded size a block occupies in the DB across the
sub-dbs/tables
- a safety factor (1.7) to allow for a "reasonable" average block size
increase over the batch
Increase the DB size by whichever is greater: the estimated size needed
or a minimum increase size, currently 128 MB.
The conservative factors in the estimate help in testing that the resize
occurs when needed, and without gratuitous size increases. For common
use, the safety factor and minimum increase size could reasonably be
increased.
For testing, setting DEFAULT_MAPSIZE (blockchain_db/lmdb/db_lmdb.h) to 1
<< 27 (128 MB) and recompiling will ensure DB resizes take place sooner
and more frequently.
|
|
|
|
|
|
This will assist in a DB resize check.
|
|
to lock up.
|
|
369c7b3 blockchain_utilities/README.md: add workaround for resizing in batch mode (moneromooo-monero)
26970c7 blockchain_utilities/README.md: add high level "what is this about" (moneromooo-monero)
|
|
8623492 Interpret x86_64 as x86-64 for architecture (moneromooo-monero)
|
|
|
|
|
|
|
|
|
|
204759f mnemonics: fix duplicate symbol error (Wladimir J. van der Laan)
|
|
|
|
ea33cad mnemonics: fix prefix extraction with non ASCII text (moneromooo-monero)
|
|
|
|
3ade396 Set dnssec_valid value correctly in dns_utils; fix address_from_url test (Rostislav)
|
|
dc4dbc1 simplewallet: allow creating a wallet from a public address and view secret key (moneromooo-monero)
6a0f61d account: allow creating an account from a public address and view secret key (moneromooo-monero)
e05a58a wallet2: fix write_watch_only_wallet comment description (moneromooo-monero)
4bf6f0d simplewallet: forbid seed commands for watch only wallets (moneromooo-monero)
|
|
2952ffd wallet2: use the same exponential splitting for normal txes (moneromooo-monero)
7c8d3be wallet2: try to split dust sweep txs exponentially (moneromooo-monero)
|
|
|
|
The needed information is supplied via a triple:
--generate-from-view-key address:viewkey:filename
|
|
|
|
|
|
They do not make sense
|
|
|
|
This ensures even massive wallets full of dust can sweep.
|
|
f6da25a Fix standard address deserialization (moneromooo-monero)
|
|
|
|
bbc5475 Fix DNS checkpoint consensus code (moneromooo-monero)
|
|
f9b361b daemon: fix an exit crash (moneromooo-monero)
|
|
fb20071 simplewallet: allow a different password for the watch-only wallet (moneromooo-monero)
|
|
6f8a6dc Add RPC commands to manipulate integrated addresses (moneromooo-monero)
67be2e4 simplewallet: allow integrated_address to generate a random payment id (moneromooo-monero)
7bd6efe account: add a couple consts (moneromooo-monero)
63741d8 Integrated addresses (standard address plus payment id) (moneromooo-monero)
|
|
It's supposed to load all records and pick one that it finds twice.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a9b1f7e dns_utils: simpify smart pointer use, and use for url strings too (moneromooo-monero)
|
|
d7df08d properly decrement p2p socket count (Thomas Winget)
|
|
35b160e fix ^D exit for bitmonerod (moneromooo-monero)
|
|
c882af6 wallet: add watch only wallet support (moneromooo-monero)
f7767c6 account: add a forget_spend_key method (moneromooo-monero)
|
|
OK, I admit I wanted to template this struct for fun too.
|
|
|
|
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
|
|
0f4a036 re-add Windows DNS bug fix, per c0de96f8bd2f64884255f9b0b61a4775ada5e3e6 (Riccardo Spagni)
|
|
|
|
6a11907 update libunbound (Riccardo Spagni)
|
|
|
|
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
|
|
|
|
ce97494 fixed static assert test (Riccardo Spagni)
|
|
|
|
e01d32e cleaning up, removing redundant files, renaming, fixing incorrect licenses (Riccardo Spagni)
dfd53b3 readme updates: added sponsors, fixed build instructions (Riccardo Spagni)
|
|
|
|
|
|
a62daeb wallet_rpc_server: add a sweep_dust RPC command as well (moneromooo-monero)
3204f0d wallet: add a sweep_dust command (moneromooo-monero)
|
|
|
|
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
|
|
87c01c3 console_handler: handle EOF properly (moneromooo-monero)
|
|
183cfac README: minor wording changes (moneromooo-monero)
|
|
5680604 Replace hardcoded value with existing constant of same value (warptangent)
f37ee2f Update database resize behavior (warptangent)
f85cd8e Include database error in more error messages (warptangent)
|
|
693a8bf rpc_command_executor: fix mining in testnet mode (moneromooo-monero)
d09be11 core_rpc_server: add a getter for the testnet flag (moneromooo-monero)
754f863 core_rpc_server: log some error messages to the console (moneromooo-monero)
4f0e8cf daemon: remove obsolete daemon_commands_handler.h (moneromooo-monero)
bac366e core_rpc_server: reenable print_pl (moneromooo-monero)
39a9508 net_peerlist: fix grayt/white naming mismatch (moneromooo-monero)
8069b3b blockchain_db: add a few const (moneromooo-monero)
0932476 wallet: add consts where appropriate (moneromooo-monero)
|
|
10ff75e daemon: Set log file default to use data dir (warptangent)
deacecc simplewallet: Update and add log options (warptangent)
f24bcd5 simplewallet: Don't log view key and spend key (warptangent)
|
|
Exit instead of reading "empty" commands in an infinite loop.
|
|
|
|
This was likely the intent.
|
|
On an existing database, don't set LMDB map size to be the initial size
for a new database.
Check if resize is needed at startup.
|
|
|
|
|
|
|
|
It's helpful when you don't know something failed (especially as
everything ends up returning true, so caller thinks all's fine)
|
|
|
|
|
|
Looking at how these are called confirms this must have been a mistake
|
|
The log file previously used the default data dir even if --data-dir was
set to something else.
Document data dir and log file path.
|
|
Replace --set_log with --log-level for consistency.
Show default log level in usage.
Add --log-file for specifying log file path.
Document log file path.
Display log file path at startup.
|
|
As with display of seed, don't log view key and spend key.
Includes:
- display of viewkey at wallet creation
- "viewkey" command output
- "spendkey" command output
|
|
|
|
because const is always appropriate
|
|
|
|
c44755a Build seed node list without duplicates (warptangent)
|
|
6962253 Fix compile for GCC 5.1.0 (warptangent)
|
|
01076ae Check if LMDB needs resize every 1000 blocks (Thomas Winget)
b0d849e null out batch txn pointer as needed (BlockchainLMDB) (Thomas Winget)
7b7ef73 LMDB should now dynamically resize the mapsize (Thomas Winget)
ac79502 Move mdb_txn_safe implementation to cpp file (Thomas Winget)
|
|
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes #231.
|
|
The random selection of a node shouldn't favor repeats that occur in the
hardcoded and DNS seed node lists.
Remove hardcoded ":18080" address which gives parse error.
Test: bitmonerod --log-level 2
The seed node list displayed at startup shouldn't show duplicate
addresses (includes port).
|
|
fee8424 Allow name@domain.tld for OpenAlias lookups (warptangent)
a0fe18f Revert "Allow name@domain.tld for OpenAlias lookups" (warptangent)
|
|
f278fe3 s/terget/target/ (moneromooo-monero)
d8ee0a9 print limits when running limit commands with no arguments (moneromooo-monero)
|
|
d1eac1b Support debugging command --pop-blocks on in-memory blockchain (warptangent)
|
|
087d7f3 Add spendkey dump to simplewallet (luigi1111)
|
|
|
|
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
|
|
This reverts commit b18368b635ba08aea541ef52ebc74180822644a2.
|
