diff options
Diffstat (limited to 'utils')
| -rw-r--r-- | utils/build_scripts/windows.bat | 45 | ||||
| -rw-r--r-- | utils/fish/README.md | 2 | ||||
| -rw-r--r-- | utils/fish/monero-wallet-cli.fish | 61 | ||||
| -rw-r--r-- | utils/fish/monero-wallet-rpc.fish | 65 | ||||
| -rw-r--r-- | utils/fish/monerod.fish | 113 | ||||
| -rw-r--r-- | utils/health/README.md | 3 | ||||
| -rwxr-xr-x | utils/health/build-scripts/clang-build-time-analyzer-clone-build.sh | 2 | ||||
| -rwxr-xr-x | utils/health/clang-build-time-analyzer-run.sh | 2 | ||||
| -rwxr-xr-x | utils/health/clang-include-what-you-use-run.sh | 2 | ||||
| -rwxr-xr-x | utils/health/clang-tidy-run-cc.sh | 37 | ||||
| -rwxr-xr-x | utils/health/clang-tidy-run-common.sh (renamed from utils/health/clang-tidy-run.sh) | 18 | ||||
| -rwxr-xr-x | utils/health/clang-tidy-run-cpp.sh | 37 | ||||
| -rwxr-xr-x | utils/health/valgrind-tests.sh | 2 | ||||
| -rw-r--r-- | utils/python-rpc/framework/daemon.py | 17 | ||||
| -rw-r--r-- | utils/python-rpc/framework/rpc.py | 3 | ||||
| -rw-r--r-- | utils/python-rpc/framework/wallet.py | 12 | ||||
| -rw-r--r-- | utils/systemd/monerod.service | 17 |
17 files changed, 354 insertions, 84 deletions
diff --git a/utils/build_scripts/windows.bat b/utils/build_scripts/windows.bat deleted file mode 100644 index a90f27c0c..000000000 --- a/utils/build_scripts/windows.bat +++ /dev/null @@ -1,45 +0,0 @@ -:: Copyright (c) 2014-2020, The Monero Project -:: -:: All rights reserved. -:: -:: Redistribution and use in source and binary forms, with or without modification, are -:: permitted provided that the following conditions are met: -:: -:: 1. Redistributions of source code must retain the above copyright notice, this list of -:: conditions and the following disclaimer. -:: -:: 2. Redistributions in binary form must reproduce the above copyright notice, this list -:: of conditions and the following disclaimer in the documentation and/or other -:: materials provided with the distribution. -:: -:: 3. Neither the name of the copyright holder nor the names of its contributors may be -:: used to endorse or promote products derived from this software without specific -:: prior written permission. -:: -:: THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY -:: EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -:: MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL -:: THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -:: SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -:: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -:: INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -:: STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF -:: THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -:: Set the following variables according to your environment -set BuildProcessorArchitecture=64 -set LocationDependencyBoostRoot=D:\Development\boost_1_55_0 -set LocationEnvironmentVariableSetterMsbuild=C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\vcvarsall.bat - -call "%LocationEnvironmentVariableSetterMsbuild%" -set LocationDependencyBoostLibrary=%LocationDependencyBoostRoot%\lib%BuildProcessorArchitecture%-msvc-%VisualStudioVersion% - -cd ..\.. -set LocationBuildSource=%CD% -mkdir build\win%BuildProcessorArchitecture% -cd build\win%BuildProcessorArchitecture% - -cmake -G "Visual Studio %VisualStudioVersion:.0=% Win%BuildProcessorArchitecture%" -DBOOST_ROOT="%LocationDependencyBoostRoot%" -DBOOST_LIBRARYDIR="%LocationDependencyBoostLibrary%" "%LocationBuildSource%" -msbuild Project.sln /p:Configuration=Release - -pause diff --git a/utils/fish/README.md b/utils/fish/README.md new file mode 100644 index 000000000..7d7c58c28 --- /dev/null +++ b/utils/fish/README.md @@ -0,0 +1,2 @@ +## Fish shell completions for Monero +This folder has basic Fish completions for `monerod`, `monero-wallet-cli`, and `monero-wallet-rpc`. To use them, put those files (or symlink them) inside `~/.config/fish/completions/` or wherever your Fish completion files are (see [https://fishshell.com/docs/current/completions.html#where-to-put-completions](https://fishshell.com/docs/current/completions.html#where-to-put-completions)) diff --git a/utils/fish/monero-wallet-cli.fish b/utils/fish/monero-wallet-cli.fish new file mode 100644 index 000000000..c9c878dba --- /dev/null +++ b/utils/fish/monero-wallet-cli.fish @@ -0,0 +1,61 @@ +complete -c monero-wallet-cli -f + +complete -c monero-wallet-cli -l help -d "Produce help message" +complete -c monero-wallet-cli -l version -d "Output version information" +complete -c monero-wallet-cli -l daemon-address -r -d "Use daemon instance at <host>:<port>" +complete -c monero-wallet-cli -l daemon-host -r -d "Use daemon instance at host <arg> instead of localhost" +complete -c monero-wallet-cli -l proxy -r -d "[<ip>:]<port> socks proxy to use for daemon connections" +complete -c monero-wallet-cli -l trusted-daemon -d "Enable commands which rely on a trusted" +complete -c monero-wallet-cli -l untrusted-daemon -d "Disable⋅commands⋅which⋅rely⋅on⋅a trusted daemon" +complete -c monero-wallet-cli -l password -r -d "Wallet⋅password⋅(escape/quote⋅as needed)" +complete -c monero-wallet-cli -l password-file -r -F -d "Wallet⋅password⋅file" +complete -c monero-wallet-cli -l daemon-port -r -d "Use daemon instance at port <arg> instead of 18081" +complete -c monero-wallet-cli -l daemon-login -r -d "Specify username[:password] for daemon RPC client" +complete -c monero-wallet-cli -l daemon-ssl -x -a "enabled disabled autodetect" -d "Enable SSL on daemon RPC connections. Default: autodetect" +complete -c monero-wallet-cli -l daemon-ssl-private-key -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format private key" +complete -c monero-wallet-cli -l daemon-ssl-certificate -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format certificate" +complete -c monero-wallet-cli -l daemon-ssl-ca-certificates -r -F -d "Path to file containing concatenated PEM format certificate(s) to replace system CA(s)." +complete -c monero-wallet-cli -l daemon-ssl-allowed-fingerprints -r -d "List of valid fingerprints of allowed RPC servers" +complete -c monero-wallet-cli -l daemon-ssl-allow-any-cert -d "Allow any SSL certificate from the daemon" +complete -c monero-wallet-cli -l daemon-ssl-allow-chained -d "Allow user (via --daemon-ssl-ca-certifi cates) chain certificates" +complete -c monero-wallet-cli -l testnet -d "For testnet. Daemon must also be launched with --testnet flag" +complete -c monero-wallet-cli -l stagenet -d "For stagenet. Daemon must also be launched with --stagenet flag" +complete -c monero-wallet-cli -l shared-ringdb-dir -r -F -d "Set shared ring database path" +complete -c monero-wallet-cli -l kdf-rounds -r -d "Number of rounds for the key derivation function. Default: 1" +complete -c monero-wallet-cli -l bitmessage-address -r -d "Use PyBitmessage instance at URL <arg>. Default: http://localhost:8442/" +complete -c monero-wallet-cli -l bitmessage-login -r -d "Specify <arg> as username:password for PyBitmessage API. Default: username:password" +complete -c monero-wallet-cli -l hw-device -r -d "HW device to use" +complete -c monero-wallet-cli -l hw-device-deriv-path -r -d "HW device wallet derivation path (e.g., SLIP-10)" +complete -c monero-wallet-cli -l tx-notify -r -d "Run a program for each new incoming transaction, '%s' will be replaced by the transaction hash" +complete -c monero-wallet-cli -l no-dns -d "Do not use DNS" +complete -c monero-wallet-cli -l offline -d "Do not connect to a daemon, nor use DNS" +complete -c monero-wallet-cli -l extra-entropy -r -F -d "File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, which typically means more than 256 bits of data)" +complete -c monero-wallet-cli -l wallet-file -r -F -d "Use wallet <arg>" +complete -c monero-wallet-cli -l generate-new-wallet -r -F -d "Generate new wallet and save it to <arg>" +complete -c monero-wallet-cli -l generate-from-device -r -F -d "Generate new wallet from device and save it to <arg>" +complete -c monero-wallet-cli -l generate-from-view-key -r -d "Generate incoming-only wallet from view key" +complete -c monero-wallet-cli -l generate-from-spend-key -r -d "Generate deterministic wallet from spend key" +complete -c monero-wallet-cli -l generate-from-keys -r -d "Generate wallet from private keys" +complete -c monero-wallet-cli -l generate-from-multisig-keys -r -d "Generate a master wallet from multisig wallet keys" +complete -c monero-wallet-cli -l generate-from-json -r -k -a "(__fish_complete_suffix .json)" -d "Generate wallet from JSON format file" +complete -c monero-wallet-cli -l mnemonic-language -r -d "Language for mnemonic" +complete -c monero-wallet-cli -l command -d "" +complete -c monero-wallet-cli -l restore-deterministic-wallet -d "Recover wallet using Electrum-style mnemonic seed" +complete -c monero-wallet-cli -l restore-from-seed -d "alias for --restore-deterministic-wallet" +complete -c monero-wallet-cli -l restore-multisig-wallet -d "Recover multisig wallet using Electrum-style mnemonic seed" +complete -c monero-wallet-cli -l non-deterministic -d "Generate non-deterministic view and spend keys" +complete -c monero-wallet-cli -l electrum-seed -r -d "Specify Electrum seed for wallet recovery/creation" +complete -c monero-wallet-cli -l allow-mismatched-daemon-version -d "Allow communicating with a daemon that uses a different RPC version" +complete -c monero-wallet-cli -l restore-height -r -d "Restore from specific blockchain height. Default: 0" +complete -c monero-wallet-cli -l restore-date -r -d "Restore from estimated blockchain height on specified date" +complete -c monero-wallet-cli -l do-not-relay -d "The newly created transaction will not be relayed to the monero network" +complete -c monero-wallet-cli -l create-address-file -d "Create an address file for new wallets" +complete -c monero-wallet-cli -l subaddress-lookahead -r -d "Set subaddress lookahead sizes to <major>:<minor>" +complete -c monero-wallet-cli -l use-english-language-names -d "Display English language names" +complete -c monero-wallet-cli -l rpc-client-secret-key -r -d "Set RPC client secret key for RPC payments" +complete -c monero-wallet-cli -l log-file -r -F -d "Specify log file" +complete -c monero-wallet-cli -l log-level -r -a "0 1 2 3 4" -d "0-4 or categories" +complete -c monero-wallet-cli -l max-log-file-size -r -d "Specify maximum log file size [B]. Default: 104850000" +complete -c monero-wallet-cli -l max-log-files -r -d "Specify maximum number of rotated log files to be saved (no limit by setting to 0). Default: 50" +complete -c monero-wallet-cli -l max-concurrency -d "Max number of threads to use for a parallel job. Default: 1" +complete -c monero-wallet-cli -l config-file -r -F -d "Config file" diff --git a/utils/fish/monero-wallet-rpc.fish b/utils/fish/monero-wallet-rpc.fish new file mode 100644 index 000000000..a64e112ef --- /dev/null +++ b/utils/fish/monero-wallet-rpc.fish @@ -0,0 +1,65 @@ +complete -c monero-wallet-rpc -f + +complete -c monero-wallet-rpc -l help -d "Produce help message" +complete -c monero-wallet-rpc -l version -d "Output version information " +complete -c monero-wallet-rpc -l daemon-address -r -d "Use daemon instance at <host>:<port>" +complete -c monero-wallet-rpc -l daemon-host -r -d "Use daemon instance at host <arg> instead of localhost" +complete -c monero-wallet-rpc -l proxy -r -d "[<ip>:]<port> socks proxy to use for daemon connections" +complete -c monero-wallet-rpc -l trusted-daemon -d "Enable commands which rely on a trusted daemon" +complete -c monero-wallet-rpc -l untrusted-daemon -d "Disable commands which rely on a trusted daemon" +complete -c monero-wallet-rpc -l password -r -d "Wallet password (escape/quote as needed)" +complete -c monero-wallet-rpc -l password-file -r -F -d "Wallet password file" +complete -c monero-wallet-rpc -l daemon-port -r -d "Use daemon instance at port <arg> instead of 18081. Default: 0" +complete -c monero-wallet-rpc -l daemon-login -r -d "Specify username[:password] for daemon RPC client" +complete -c monero-wallet-rpc -l daemon-ssl -x -a "enabled disabled autodetect" -d "Enable SSL on daemon RPC connections. Default: autodetect" +complete -c monero-wallet-rpc -l daemon-ssl-private-key -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format private key" +complete -c monero-wallet-rpc -l daemon-ssl-certificate -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format certificate" +complete -c monero-wallet-rpc -l daemon-ssl-ca-certificates -r -F -d "Path to file containing concatenated PEM format certificate(s) to replace system CA(s)." +complete -c monero-wallet-rpc -l daemon-ssl-allowed-fingerprints -r -d "List of valid fingerprints of allowed RPC servers" +complete -c monero-wallet-rpc -l daemon-ssl-allow-any-cert -d "Allow any SSL certificate from the daemon" +complete -c monero-wallet-rpc -l daemon-ssl-allow-chained -d "Allow user (via --daemon-ssl-ca-certifi cates) chain certificates" +complete -c monero-wallet-rpc -l testnet -d "For testnet. Daemon must also be launched with --testnet flag" +complete -c monero-wallet-rpc -l stagenet -d "For stagenet. Daemon must also be launched with --stagenet flag" +complete -c monero-wallet-rpc -l shared-ringdb-dir -r -F -d "Set shared ring database path" +complete -c monero-wallet-rpc -l kdf-rounds -r -d "Number of rounds for the key derivation function. Default: 1" +complete -c monero-wallet-rpc -l bitmessage-address -r -d "Use PyBitmessage instance at URL <arg>. Default: http://localhost:8442/" +complete -c monero-wallet-rpc -l bitmessage-login -r -d "Specify <arg> as username:password for PyBitmessage API. Default: username:password" +complete -c monero-wallet-rpc -l hw-device -r -d "HW device to use" +complete -c monero-wallet-rpc -l hw-device-deriv-path -r -d "HW device wallet derivation path (e.g., SLIP-10)" +complete -c monero-wallet-rpc -l tx-notify -r -d "Run a program for each new incoming transaction, '%s' will be replaced by the transaction hash" +complete -c monero-wallet-rpc -l no-dns -d "Do not use DNS" +complete -c monero-wallet-rpc -l offline -d "Do not connect to a daemon, nor use DNS" +complete -c monero-wallet-rpc -l extra-entropy -r -F -d "File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, which typically means more than 256 bits of data)" +complete -c monero-wallet-rpc -l rpc-bind-port -r -d "Sets bind port for server" +complete -c monero-wallet-rpc -l disable-rpc-login -d "Disable HTTP authentication for RPC connections served by this process" +complete -c monero-wallet-rpc -l restricted-rpc -d "Restricts to view-only commands" +complete -c monero-wallet-rpc -l rpc-bind-ip -r -d "Specify IP to bind RPC server. Default: 127.0.0.1" +complete -c monero-wallet-rpc -l rpc-bind-ipv6-address -r -d "Specify IPv6 address to bind RPC server. Default: ::1" +complete -c monero-wallet-rpc -l rpc-restricted-bind-ip -r -d "Specify IP to bind restricted RPC server. Default: 127.0.0.1" +complete -c monero-wallet-rpc -l rpc-restricted-bind-ipv6-address -r -d "Specify IPv6 address to bind restricted RPC server. Default: ::1" +complete -c monero-wallet-rpc -l rpc-use-ipv6 -d "Allow IPv6 for RPC" +complete -c monero-wallet-rpc -l rpc-ignore-ipv4 -d "Ignore unsuccessful IPv4 bind for RPC" +complete -c monero-wallet-rpc -l rpc-login -r -d "Specify username[:password] required for RPC server" +complete -c monero-wallet-rpc -l confirm-external-bind -d "Confirm rpc-bind-ip value is NOT a loopback (local) IP" +complete -c monero-wallet-rpc -l rpc-access-control-origins -r -d "Specify a comma separated list of origins to allow cross origin resource sharing" +complete -c monero-wallet-rpc -l rpc-ssl -x -a "enabled disabled autodetect" -d "Enable SSL on RPC connections. Default: autodetect" +complete -c monero-wallet-rpc -l rpc-ssl-private-key -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format private key" +complete -c monero-wallet-rpc -l rpc-ssl-certificate -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format certificate" +complete -c monero-wallet-rpc -l rpc-ssl-ca-certificates -r -F -d "Path to file containing concatenated PEM format certificate(s) to replace system CA(s)." +complete -c monero-wallet-rpc -l rpc-ssl-allowed-fingerprints -r -d "List of certificate fingerprints to allow" +complete -c monero-wallet-rpc -l rpc-ssl-allow-chained -d "Allow user (via --rpc-ssl-certificates) chain certificates" +complete -c monero-wallet-rpc -l disable-rpc-ban -d "Do not ban hosts on RPC errors" +complete -c monero-wallet-rpc -l wallet-file -r -F -d "Use wallet <arg>" +complete -c monero-wallet-rpc -l generate-from-json -r -k -a "(__fish_complete_suffix .json)" -d "Generate wallet from JSON format file" +complete -c monero-wallet-rpc -l wallet-dir -r -F -d "Directory for newly created wallets" +complete -c monero-wallet-rpc -l prompt-for-password -d "Prompts for password when not provided" +complete -c monero-wallet-rpc -l rpc-client-secret-key -r -d "Set RPC client secret key for RPC payments" +complete -c monero-wallet-rpc -l detach -d "Run as daemon" +complete -c monero-wallet-rpc -l pidfile -r -F -d "File path to write the daemon's PID to (optional, requires --detach)" +complete -c monero-wallet-rpc -l non-interactive -d "Run non-interactive" +complete -c monero-wallet-rpc -l log-file -r -F -d "Specify log file" +complete -c monero-wallet-rpc -l log-level -r -a "0 1 2 3 4" -d "0-4 or categories" +complete -c monero-wallet-rpc -l max-log-file-size -r -d "Specify maximum log file size [B]. Default: 104850000" +complete -c monero-wallet-rpc -l max-log-files -r -d "Specify maximum number of rotated log files to be saved (no limit by setting to 0). Default: 50" +complete -c monero-wallet-rpc -l max-concurrency -d "Max number of threads to use for a parallel job. Default: 1" +complete -c monero-wallet-rpc -l config-file -r -F -d "Config file" diff --git a/utils/fish/monerod.fish b/utils/fish/monerod.fish new file mode 100644 index 000000000..d2836a6b2 --- /dev/null +++ b/utils/fish/monerod.fish @@ -0,0 +1,113 @@ +complete -c monerod -f + +complete -c monerod -l help -d "Produce help message" +complete -c monerod -l version -d "Output version information" +complete -c monerod -l os-version -d "OS for which this executable was compiled" +complete -c monerod -l config-file -r -d "Specify configuration file" +complete -c monerod -l detach -d "Run as daemon" +complete -c monerod -l pidfile -r -F -d "File path to write the daemon's PID to (optional, requires --detach)" +complete -c monerod -l non-interactive -d "Run non-interactive" +complete -c monerod -l log-file -r -F -d "Specify log file" +complete -c monerod -l log-level -r -d "" +complete -c monerod -l max-log-file-size -r -d "Specify maximum log file size [B]. Default: 104850000" +complete -c monerod -l max-log-files -r -d "Specify maximum number of rotated log files to be saved (no limit by setting to 0). Default: 50" +complete -c monerod -l max-concurrency -r -d "Max number of threads to use for a parallel job. Default: 0" +complete -c monerod -l proxy -r -d "Network communication through proxy: <socks-ip:port> i.e. \"127.0.0.1:9050\"" +complete -c monerod -l proxy-allow-dns-leaks -d "Allow DNS leaks outside of proxy" +complete -c monerod -l public-node -d "Allow other users to use the node as a remote (restricted RPC mode, view-only commands) and advertise it over P2P" +complete -c monerod -l zmq-rpc-bind-ip -r -d "IP for ZMQ RPC server to listen on. Default: 127.0.0.1" +complete -c monerod -l zmq-rpc-bind-port -r -d "Port for ZMQ RPC server to listen on. Default: 18082, 28082 if 'testnet', 38082 if 'stagenet'" +complete -c monerod -l zmq-pub -r -d "Address for ZMQ pub - tcp://ip:port or ipc://path " +complete -c monerod -l no-zmq -d "Disable ZMQ RPC server [114/349]" +complete -c monerod -l data-dir -x -a "(__fish_complete_directories)" -d "Specify data directory" +complete -c monerod -l test-drop-download -d "For net tests: in download, discard ALL blocks instead checking/saving them (very fast)" +complete -c monerod -l test-drop-download-height -r -d "Like test-drop-download but discards only after around certain height. Default: 0" +complete -c monerod -l testnet -d "Run on testnet. The wallet must be launched with --testnet flag." +complete -c monerod -l stagenet -d "Run on stagenet. The wallet must be launched with --stagenet flag." +complete -c monerod -l regtest -d "Run in a regression testing mode." +complete -c monerod -l keep-fakechain -d "Don't delete any existing database when in fakechain mode." +complete -c monerod -l fixed-difficulty -r -d "Fixed difficulty used for testing. Default: 0" +complete -c monerod -l enforce-dns-checkpointing -d "checkpoints from DNS server will be enforced" +complete -c monerod -l prep-blocks-threads -r -d "Max number of threads to use when preparing block hashes in groups. Default: 4" +complete -c monerod -l fast-block-sync -r -d "Sync up most of the way by using embedded, known block hashes. Default: 1" +complete -c monerod -l show-time-stats -r -d "(=0) Show time-stats when processing blocks/txs and disk synchronization. Default: 0" +complete -c monerod -l block-sync-size -r -d "(=0) How many blocks to sync at once during chain synchronization (0 = adaptive). Default: 0" +complete -c monerod -l check-updates -x -a "disabled notify download update" -d "Check for new versions of monero. Default: notify" +complete -c monerod -l fluffy-blocks -d "Relay blocks as fluffy blocks (obsolete, now default)" +complete -c monerod -l no-fluffy-blocks -d "Relay blocks as normal blocks" +complete -c monerod -l test-dbg-lock-sleep -r -d "Sleep time in ms, defaults to 0 (off), used to debug before/after locking mutex. Values 100 to 1000 are good for tests." +complete -c monerod -l offline -d "Do not listen for peers, nor connect to any" +complete -c monerod -l disable-dns-checkpoints -d "Do not retrieve checkpoints from DNS" +complete -c monerod -l block-download-max-size -r -d "Set maximum size of block download queue in bytes (0 for default)" +complete -c monerod -l sync-pruned-blocks -d "Allow syncing from nodes with only pruned blocks" +complete -c monerod -l max-txpool-weight -r -d "Set maximum txpool weight in bytes. Default: 648000000" +complete -c monerod -l block-notify -r -d "Run a program for each new block, '%s' will be replaced by the block hash" +complete -c monerod -l prune-blockchain -d "Prune blockchain" +complete -c monerod -l reorg-notify -r -d "Run a program for each reorg, '%s' will be replaced by the split height, '%h' will be replaced by the new blockchain height, '%n' will be replaced by the number of new blocks in the new chain, and '%d' will be replaced by the number of blocks discarded from the old chain" +complete -c monerod -l block-rate-notify -r -d "Run a program when the block rate undergoes large fluctuations. This might be a sign of large amounts of hash rate going on and off the Monero network, and thus be of potential interest in predicting attacks. %t will be replaced by the number of minutes for the observation window, %b by the number of blocks observed within that window, and %e by the number of blocks that was expected in that window. It is suggested that this notification is used to automatically increase the number of confirmations required before a payment is acted upon." +complete -c monerod -l keep-alt-blocks -d "Keep alternative blocks on restart" +complete -c monerod -l extra-messages-file -r -F -d "Specify file for extra messages to include into coinbase transactions" +complete -c monerod -l start-mining -r -d "Specify wallet address to mining for" +complete -c monerod -l mining-threads -r -d "Specify mining threads count" +complete -c monerod -l bg-mining-enable -d "Enable background mining" +complete -c monerod -l bg-mining-ignore-battery -d "If true, assumes plugged in when unable to query system power status" +complete -c monerod -l bg-mining-min-idle-interval -r -d "Specify min lookback interval in seconds for determining idle state" +complete -c monerod -l bg-mining-idle-threshold -r -d "Specify minimum avg idle percentage over lookback interval" +complete -c monerod -l bg-mining-miner-target -r -d "Specify maximum percentage cpu use by miner(s)" +complete -c monerod -l db-sync-mode -r -d "Specify sync option, using format [safe|fast|fastest]:[sync|async]:[<nblo cks_per_sync>[blocks]|<nbytes_per_sync> [bytes]]. Default: fast:async:250000000bytes" +complete -c monerod -l db-salvage -d "Try to salvage a blockchain database if it seems corrupted" +complete -c monerod -l p2p-bind-ip -r -d "Interface for p2p network protocol (IPv4). Default: 0.0.0.0" +complete -c monerod -l p2p-bind-ipv6-address -r -d "Interface for p2p network protocol (IPv6). Default: ::" +complete -c monerod -l p2p-bind-port -r -d "Port for p2p network protocol (IPv4). Default: 18080, 28080 if 'testnet', 38080 if 'stagenet'" +complete -c monerod -l p2p-bind-port-ipv6 -d "Port for p2p network protocol (IPv6). Default: 18080, 28080 if 'testnet', 38080 if 'stagenet'" +complete -c monerod -l p2p-use-ipv6 -d "Enable IPv6 for p2p" +complete -c monerod -l p2p-ignore-ipv4 -d "Ignore unsuccessful IPv4 bind for p2p" +complete -c monerod -l p2p-external-port -r -d "External port for p2p network protocol (if port forwarding used with NAT). Default: 0" +complete -c monerod -l allow-local-ip -d "Allow local ip add to peer list, mostly in debug purposes" +complete -c monerod -l add-peer -r -d "Manually add peer to local peerlist" +complete -c monerod -l add-priority-node -r -d "Specify list of peers to connect to and attempt to keep the connection open" +complete -c monerod -l add-exclusive-node -r -d "Specify list of peers to connect to only. If this option is given the options add-priority-node and seed-node are ignored" +complete -c monerod -l seed-node -r -d "Connect to a node to retrieve peer addresses, and disconnect" +complete -c monerod -l tx-proxy -r -d "Send local txes through proxy: <network-type>,<socks-ip:port>[,max_con nections][,disable_noise] i.e. \"tor,127.0.0.1:9050,100,disable_noise\"" +complete -c monerod -l anonymous-inbound -r -d "<hidden-service-address>,<[bind-ip:]port>[,max_connections] i.e. \"x.onion,127.0.0.1:18083,100\"" +complete -c monerod -l ban-list -r -F -d "Specify ban list file, one IP address per line" +complete -c monerod -l hide-my-port -d "Do not announce yourself as peerlist candidate" +complete -c monerod -l no-sync -d "Don't synchronize the blockchain with other peers" +complete -c monerod -l enable-dns-blocklist -d "Apply realtime blocklist from DNS" +complete -c monerod -l no-igd -d "Disable UPnP port mapping" +complete -c monerod -l igd -r -a "Enabled disabled enabled" -d "UPnP port mapping. Default: delayed" +complete -c monerod -l out-peers -r -d "Set max number of out peers. Default: -1" +complete -c monerod -l in-peers -r -d "Set max number of in peers. Default: -1" +complete -c monerod -l tos-flag -r -d "Set TOS flag. Default: -1" +complete -c monerod -l limit-rate-up -r -d "Set limit-rate-up [kB/s]. Default: 2048" +complete -c monerod -l limit-rate-down -r -d "Set limit-rate-down [kB/s]. Default: 8192" +complete -c monerod -l limit-rate -r -d "Set limit-rate [kB/s]. Default: -1" +complete -c monerod -l pad-transactions -d "Pad relayed transactions to help defend against traffic volume analysis" +complete -c monerod -l max-connections-per-ip -r -d "Maximum number of connections allowed from the same IP address. Default: 1" +complete -c monerod -l rpc-bind-port -r -d "Port for RPC server. Default: 18081, 28081 if 'testnet', 38081 if 'stagenet'" +complete -c monerod -l rpc-restricted-bind-port -r -d "Port for restricted RPC server" +complete -c monerod -l restricted-rpc -d "Restrict RPC to view only commands and do not return privacy sensitive data in RPC calls" +complete -c monerod -l bootstrap-daemon-address -r -d "URL of a 'bootstrap' remote daemon that the connected wallets can use while this daemon is still not fully synced. Use 'auto' to enable automatic public nodes discovering and bootstrap daemon switching" +complete -c monerod -l bootstrap-daemon-login -r -d "Specify username:password for the bootstrap daemon login" +complete -c monerod -l bootstrap-daemon-proxy -r -d "<ip>:<port> socks proxy to use for bootstrap daemon connections" +complete -c monerod -l rpc-bind-ip -r -d "Specify IP to bind RPC server. Default: 127.0.0.1" +complete -c monerod -l rpc-bind-ipv6-address -r -d "Specify IPv6 address to bind RPC server. Default: ::1" +complete -c monerod -l rpc-restricted-bind-ip -r -d "Specify IP to bind restricted RPC server. Default: 127.0.0.1" +complete -c monerod -l rpc-restricted-bind-ipv6-address -r -d "Specify IPv6 address to bind restricted RPC server. Default: ::1" +complete -c monerod -l rpc-use-ipv6 -d "Allow IPv6 for RPC" +complete -c monerod -l rpc-ignore-ipv4 -d "Ignore unsuccessful IPv4 bind for RPC" +complete -c monerod -l rpc-login -d "Specify username[:password] required for RPC server" +complete -c monerod -l confirm-external-bind -d "Confirm rpc-bind-ip value is NOT a loopback (local) IP" +complete -c monerod -l rpc-access-control-origins -r -d "Specify a comma separated list of origins to allow cross origin resource sharing" +complete -c monerod -l rpc-ssl -x -a "enabled disabled autodetect" -d "Enable SSL on RPC connections. Default: autodetect" +complete -c monerod -l rpc-ssl-private-key -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format private key" +complete -c monerod -l rpc-ssl-certificate -r -k -a "(__fish_complete_suffix .pem)" -d "Path to a PEM format certificate" +complete -c monerod -l rpc-ssl-ca-certificates -r -F -d "Path to file containing concatenated PEM format certificate(s) to replace system CA(s)." +complete -c monerod -l rpc-ssl-allowed-fingerprints -r -d "List of certificate fingerprints to allow" +complete -c monerod -l rpc-ssl-allow-chained -d "Allow user (via --rpc-ssl-certificates) chain certificates" +complete -c monerod -l disable-rpc-ban -d "Do not ban hosts on RPC errors" +complete -c monerod -l rpc-ssl-allow-any-cert -d "Allow any peer certificate" +complete -c monerod -l rpc-payment-address -r -d "Restrict RPC to clients sending micropayment to this address" +complete -c monerod -l rpc-payment-difficulty -r -d "Restrict RPC to clients sending micropayment at this difficulty. Default: 1000" +complete -c monerod -l rpc-payment-credits -r -d "Restrict RPC to clients sending micropayment, yields that many credits per payment. Default: 100" +complete -c monerod -l rpc-payment-allow-free-loopback -d "Allow free access from the loopback address (ie, the local host)" diff --git a/utils/health/README.md b/utils/health/README.md index 05eb057a1..d4ca4a538 100644 --- a/utils/health/README.md +++ b/utils/health/README.md @@ -16,7 +16,8 @@ On the first run, the script will complain about the missing ClangBuildAnalyzer ## clang-tidy -`utils/health/clang-tidy-run.sh` +`utils/health/clang-tidy-run-cc.sh` +`utils/health/clang-tidy-run-cpp.sh` Performs Lint checks on the source code and stores the result in the build directory. More information on the [home page](https://clang.llvm.org/extra/clang-tidy/). ## include-what-you-use diff --git a/utils/health/build-scripts/clang-build-time-analyzer-clone-build.sh b/utils/health/build-scripts/clang-build-time-analyzer-clone-build.sh index de5f35a38..9284cbbd4 100755 --- a/utils/health/build-scripts/clang-build-time-analyzer-clone-build.sh +++ b/utils/health/build-scripts/clang-build-time-analyzer-clone-build.sh @@ -1,6 +1,6 @@ #!/bin/bash -e -# Copyright (c) 2014-2020, The Monero Project +# Copyright (c) 2014-2022, The Monero Project # # All rights reserved. # diff --git a/utils/health/clang-build-time-analyzer-run.sh b/utils/health/clang-build-time-analyzer-run.sh index fb7eeaced..583b4ed30 100755 --- a/utils/health/clang-build-time-analyzer-run.sh +++ b/utils/health/clang-build-time-analyzer-run.sh @@ -1,6 +1,6 @@ #!/bin/bash -e -# Copyright (c) 2014-2020, The Monero Project +# Copyright (c) 2014-2022, The Monero Project # # All rights reserved. # diff --git a/utils/health/clang-include-what-you-use-run.sh b/utils/health/clang-include-what-you-use-run.sh index 655a188bd..50db929b0 100755 --- a/utils/health/clang-include-what-you-use-run.sh +++ b/utils/health/clang-include-what-you-use-run.sh @@ -1,6 +1,6 @@ #!/bin/bash -e -# Copyright (c) 2014-2020, The Monero Project +# Copyright (c) 2014-2022, The Monero Project # # All rights reserved. # diff --git a/utils/health/clang-tidy-run-cc.sh b/utils/health/clang-tidy-run-cc.sh new file mode 100755 index 000000000..5c8e8acb3 --- /dev/null +++ b/utils/health/clang-tidy-run-cc.sh @@ -0,0 +1,37 @@ +#!/bin/bash -e + +# Copyright (c) 2014-2022, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# clang-tidy runs lint checks on C & C++ sources and headers. +# Run this script from the source directory. + +DIR_THIS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )" +source "$DIR_THIS/clang-tidy-run-common.sh" + +tidy_for_language "C" diff --git a/utils/health/clang-tidy-run.sh b/utils/health/clang-tidy-run-common.sh index 6b34f6a3b..b16d96584 100755 --- a/utils/health/clang-tidy-run.sh +++ b/utils/health/clang-tidy-run-common.sh @@ -1,6 +1,6 @@ #!/bin/bash -e -# Copyright (c) 2014-2020, The Monero Project +# Copyright (c) 2014-2022, The Monero Project # # All rights reserved. # @@ -29,7 +29,7 @@ # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # clang-tidy runs lint checks on C & C++ sources and headers. -# Run this script from the source directory. +# Don't use this script directly but call clang-tidy-run-cc.sh or clang-tidy-run-cpp.sh instead DIR_BUILD_BASE="build/clang-tidy" RESULT_BASE="clang-tidy-result" @@ -40,6 +40,7 @@ function tidy_for_language() { RESULT="${RESULT_BASE}-${LANG}.txt" mkdir -p "$DIR_BUILD" && pushd "$DIR_BUILD" + rm `find . -name "CMakeCache.txt"` || true cmake ../.. \ -DCMAKE_C_COMPILER=clang \ @@ -52,14 +53,13 @@ function tidy_for_language() { make clean # Clean up, so that the result can be regenerated from scratch time make -k 2>&1 | tee "$RESULT" # Build and store the result. -k means: ignore errors #time make -k easylogging 2>&1 | tee "$RESULT" # Quick testing: build a single target - gzip -f "$RESULT" # Zip the result, because it's huge. -f overwrites the previously generated result - + KPI=$(cat "$RESULT" | wc -l) + tar -cJvf "$RESULT.txz" "$RESULT" # Zip the result, because it's huge. + rm -v "$RESULT" echo "" - echo "Readable result stored in: $DIR_BUILD/$RESULT.gz" + echo "Readable result stored in: $DIR_BUILD/$RESULT.txz" + + echo "$KPI" > "kpis.txt" popd } - -tidy_for_language "C" -tidy_for_language "CXX" - diff --git a/utils/health/clang-tidy-run-cpp.sh b/utils/health/clang-tidy-run-cpp.sh new file mode 100755 index 000000000..3b5ea4b04 --- /dev/null +++ b/utils/health/clang-tidy-run-cpp.sh @@ -0,0 +1,37 @@ +#!/bin/bash -e + +# Copyright (c) 2014-2022, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# clang-tidy runs lint checks on C & C++ sources and headers. +# Run this script from the source directory. + +DIR_THIS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )" +source "$DIR_THIS/clang-tidy-run-common.sh" + +tidy_for_language "CXX" diff --git a/utils/health/valgrind-tests.sh b/utils/health/valgrind-tests.sh index 9f5e7e7c0..b1fb0b0f4 100755 --- a/utils/health/valgrind-tests.sh +++ b/utils/health/valgrind-tests.sh @@ -1,6 +1,6 @@ #!/bin/bash -e -# Copyright (c) 2014-2020, The Monero Project +# Copyright (c) 2014-2022, The Monero Project # # All rights reserved. # diff --git a/utils/python-rpc/framework/daemon.py b/utils/python-rpc/framework/daemon.py index 435459f6d..2bb7e664f 100644 --- a/utils/python-rpc/framework/daemon.py +++ b/utils/python-rpc/framework/daemon.py @@ -1,4 +1,5 @@ -# Copyright (c) 2018 The Monero Project +# Copyright (c) 2018-2022, The Monero Project + # # All rights reserved. # @@ -61,6 +62,20 @@ class Daemon(object): } return self.rpc.send_json_rpc_request(get_miner_data) + def calc_pow(self, major_version, height, block_blob, seed_hash = ''): + calc_pow = { + 'method': 'calc_pow', + 'params': { + 'major_version': major_version, + 'height': height, + 'block_blob' : block_blob, + 'seed_hash' : seed_hash, + }, + 'jsonrpc': '2.0', + 'id': '0' + } + return self.rpc.send_json_rpc_request(calc_pow) + def add_aux_pow(self, blocktemplate_blob, aux_pow, client = ""): add_aux_pow = { 'method': 'add_aux_pow', diff --git a/utils/python-rpc/framework/rpc.py b/utils/python-rpc/framework/rpc.py index b857be4d2..58b1eb794 100644 --- a/utils/python-rpc/framework/rpc.py +++ b/utils/python-rpc/framework/rpc.py @@ -1,4 +1,5 @@ -# Copyright (c) 2018 The Monero Project +# Copyright (c) 2018-2022, The Monero Project + # # All rights reserved. # diff --git a/utils/python-rpc/framework/wallet.py b/utils/python-rpc/framework/wallet.py index 02084620c..01e937627 100644 --- a/utils/python-rpc/framework/wallet.py +++ b/utils/python-rpc/framework/wallet.py @@ -1,4 +1,5 @@ -# Copyright (c) 2018 The Monero Project +# Copyright (c) 2018-2022, The Monero Project + # # All rights reserved. # @@ -489,10 +490,11 @@ class Wallet(object): } return self.rpc.send_json_rpc_request(is_multisig) - def prepare_multisig(self): + def prepare_multisig(self, enable_multisig_experimental = False): prepare_multisig = { 'method': 'prepare_multisig', 'params' : { + 'enable_multisig_experimental': enable_multisig_experimental, }, 'jsonrpc': '2.0', 'id': '0' @@ -512,14 +514,12 @@ class Wallet(object): } return self.rpc.send_json_rpc_request(make_multisig) - def finalize_multisig(self, multisig_info, password = ''): + def finalize_multisig(self): finalize_multisig = { 'method': 'finalize_multisig', 'params' : { - 'multisig_info': multisig_info, - 'password': password, }, - 'jsonrpc': '2.0', + 'jsonrpc': '2.0', 'id': '0' } return self.rpc.send_json_rpc_request(finalize_multisig) diff --git a/utils/systemd/monerod.service b/utils/systemd/monerod.service index c89e31f8c..63daefa82 100644 --- a/utils/systemd/monerod.service +++ b/utils/systemd/monerod.service @@ -9,28 +9,11 @@ WorkingDirectory=~ StateDirectory=monero LogsDirectory=monero -# Clearnet config -# Type=simple ExecStart=/usr/bin/monerod --config-file /etc/monerod.conf --non-interactive StandardOutput=null StandardError=null -# Tor config -# -## We have to use simple, not forking, because we cannot pass --detach -## because stderr/stdout is not available when detached, but torsocks -## attempts to write to it, and fails with 'invalid argument', causing -## monerod to fail. -#Type=simple -#Environment=DNS_PUBLIC=tcp -## The following is needed only when accessing wallet from a different -## host in the LAN, VPN, etc, the RPC must bind to 0.0.0.0, but -## by default torsocks only allows binding to localhost. -#Environment=TORSOCKS_ALLOW_INBOUND=1 -#ExecStart=/usr/bin/torsocks /usr/bin/monerod --config-file /etc/monerod.conf \ -# --non-interactive - Restart=always [Install] |