diff options
Diffstat (limited to 'translations')
| -rw-r--r-- | translations/monero.ts | 34 | ||||
| -rw-r--r-- | translations/monero_fr.ts | 40 | ||||
| -rw-r--r-- | translations/monero_it.ts | 48 |
3 files changed, 61 insertions, 61 deletions
diff --git a/translations/monero.ts b/translations/monero.ts index 4393d3457..413dd073a 100644 --- a/translations/monero.ts +++ b/translations/monero.ts @@ -414,7 +414,7 @@ <name>cryptonote::rpc_args</name> <message> <location filename="../src/rpc/rpc_args.cpp" line="38"/> - <source>Specify ip to bind rpc server</source> + <source>Specify IP to bind RPC server</source> <translation type="unfinished"></translation> </message> <message> @@ -527,7 +527,7 @@ </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="710"/> - <source>sweep_below <amount_threshold> [mixin] address [payment_id] - Send all unlocked outputs below the threshold to an address</source> + <source>sweep_below <amount_threshold> [mixin] address [<payment_id>] - Send all unlocked outputs below the threshold to an address</source> <translation type="unfinished"></translation> </message> <message> @@ -851,7 +851,7 @@ This transaction will unlock on block %llu, in approximately %s days (assuming 2 </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="2921"/> - <source>missing amount threshold</source> + <source>missing threshold amount</source> <translation type="unfinished"></translation> </message> <message> @@ -896,7 +896,7 @@ This transaction will unlock on block %llu, in approximately %s days (assuming 2 </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="3137"/> - <source>daemon is busy. Please try later</source> + <source>daemon is busy. Please try again later</source> <translation type="unfinished"></translation> </message> <message> @@ -931,12 +931,12 @@ This transaction will unlock on block %llu, in approximately %s days (assuming 2 </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="525"/> - <source>priority must be 0, 1, 2, 3,or 4</source> + <source>priority must be 0, 1, 2, 3, or 4</source> <translation type="unfinished"></translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="540"/> - <source>priority must be 0, 1, 2 3,or 4</source> + <source>priority must be 0, 1, 2, 3, or 4</source> <translation type="unfinished"></translation> </message> <message> @@ -961,7 +961,7 @@ This transaction will unlock on block %llu, in approximately %s days (assuming 2 </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="709"/> - <source>sweep_all [mixin] address [payment_id] - Send all unlocked balance to an address</source> + <source>sweep_all [mixin] address [<payment_id>] - Send all unlocked balance to an address</source> <translation type="unfinished"></translation> </message> <message> @@ -1124,7 +1124,7 @@ This transaction will unlock on block %llu, in approximately %s days (assuming 2 </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1887"/> - <source>expected at least one payment_id</source> + <source>expected at least one payment ID</source> <translation type="unfinished"></translation> </message> <message> @@ -1340,7 +1340,7 @@ Warning: Some input keys being spent are from </source> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="706"/> - <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> + <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> <translation type="unfinished"></translation> </message> <message> @@ -1612,7 +1612,7 @@ Warning: Some input keys being spent are from </source> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1306"/> <location filename="../src/simplewallet/simplewallet.cpp" line="1311"/> - <source>invalid language choice passed. Please try again. + <source>invalid language choice entered. Please try again. </source> <translation type="unfinished"></translation> </message> @@ -2493,7 +2493,7 @@ Outputs per *: </source> </message> <message> <location filename="../src/wallet/wallet2.cpp" line="460"/> - <source>Enter new wallet password</source> + <source>Enter new password for the wallet</source> <translation type="unfinished"></translation> </message> <message> @@ -2651,13 +2651,13 @@ Outputs per *: </source> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1789"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1814"/> - <source>Storing wallet...</source> + <source>Saving wallet...</source> <translation type="unfinished"></translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1791"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1816"/> - <source>Stored ok</source> + <source>Saved ok</source> <translation type="unfinished"></translation> </message> <message> @@ -2672,22 +2672,22 @@ Outputs per *: </source> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1805"/> - <source>Failed to initialize wallet rpc server</source> + <source>Failed to initialize wallet RPC server</source> <translation type="unfinished"></translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1809"/> - <source>Starting wallet rpc server</source> + <source>Starting wallet RPC server</source> <translation type="unfinished"></translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1811"/> - <source>Stopped wallet rpc server</source> + <source>Stopped wallet RPC server</source> <translation type="unfinished"></translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1820"/> - <source>Failed to store wallet: </source> + <source>Failed to save wallet: </source> <translation type="unfinished"></translation> </message> </context> diff --git a/translations/monero_fr.ts b/translations/monero_fr.ts index 8ebba52cf..9a2e82f62 100644 --- a/translations/monero_fr.ts +++ b/translations/monero_fr.ts @@ -414,7 +414,7 @@ <name>cryptonote::rpc_args</name> <message> <location filename="../src/rpc/rpc_args.cpp" line="38"/> - <source>Specify ip to bind rpc server</source> + <source>Specify IP to bind RPC server</source> <translation>Spécifier l'IP à laquelle lier le serveur RPC</translation> </message> <message> @@ -527,8 +527,8 @@ </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="710"/> - <source>sweep_below <amount_threshold> [mixin] address [payment_id] - Send all unlocked outputs below the threshold to an address</source> - <translation>sweep_below <montant_seuil> [mixin] adresse [ID_paiement] - Envoyer toutes les sorties débloquées sous le seuil vers une adresse</translation> + <source>sweep_below <amount_threshold> [mixin] address [<payment_id>] - Send all unlocked outputs below the threshold to an address</source> + <translation>sweep_below <montant_seuil> [mixin] adresse [<ID_paiement>] - Envoyer toutes les sorties débloquées sous le seuil vers une adresse</translation> </message> <message> <source>Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value - merge-destinations <1|0> - whether to merge multiple payments to the same destination address</source> @@ -872,7 +872,7 @@ Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s j </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="2921"/> - <source>missing amount threshold</source> + <source>missing threshold amount</source> <translation>montant seuil manquant</translation> </message> <message> @@ -917,7 +917,7 @@ Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s j </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="3137"/> - <source>daemon is busy. Please try later</source> + <source>daemon is busy. Please try again later</source> <translation>le démon est occupé. Veuillez réessayer plus tard</translation> </message> <message> @@ -952,12 +952,12 @@ Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s j </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="525"/> - <source>priority must be 0, 1, 2, 3,or 4</source> + <source>priority must be 0, 1, 2, 3, or 4</source> <translation>la priorité doit être 0, 1, 2, 3 ou 4</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="540"/> - <source>priority must be 0, 1, 2 3,or 4</source> + <source>priority must be 0, 1, 2, 3, or 4</source> <translation>la priorité doit être 0, 1, 2, 3 ou 4</translation> </message> <message> @@ -982,8 +982,8 @@ Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s j </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="709"/> - <source>sweep_all [mixin] address [payment_id] - Send all unlocked balance to an address</source> - <translation>sweep_all [mixin] adresse [ID_paiement] - Envoyer tout le solde débloqué à une adresse</translation> + <source>sweep_all [mixin] address [<payment_id>] - Send all unlocked balance to an address</source> + <translation>sweep_all [mixin] adresse [<ID_paiement>] - Envoyer tout le solde débloqué à une adresse</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="711"/> @@ -1149,7 +1149,7 @@ Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s j </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1887"/> - <source>expected at least one payment_id</source> + <source>expected at least one payment ID</source> <translation>au moins un ID de paiement attendu</translation> </message> <message> @@ -1371,7 +1371,7 @@ Attention : Certaines clés d'entrées étant dépensées sont issues de < </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="706"/> - <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> + <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> <translation>transfer [<priorité>] [<mixin>] <adresse> <montant> [<ID_paiement>] - Transférer <montant> à <adresse>. <priorité> est la priorité de la transaction. Plus la priorité est élevée, plues les frais de transaction seront élévés. Les valeurs de priorité valies sont dans l'ordre (de la plus basse à la plus élevée) : unimportant, normal, elevated, priority. Si ce paramètre est omis, la valeur par défaut (voir la commande "set priority") est utilisée. <mixin> est le nombre d'entrées supplémentaires à inclure pour l'intraçabilité. De multiples paiements peuvent être effectués d'un coup en ajoutant <adresse_2> <montant_2> et cetera (avant l'ID de paiement, s'il est inclus)</translation> </message> <message> @@ -1643,7 +1643,7 @@ Attention : Certaines clés d'entrées étant dépensées sont issues de < <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1306"/> <location filename="../src/simplewallet/simplewallet.cpp" line="1311"/> - <source>invalid language choice passed. Please try again. + <source>invalid language choice entered. Please try again. </source> <translation>choix de langue passé invalide. Veuillez réessayer. </translation> @@ -2543,7 +2543,7 @@ Sorties par * : </translation> </message> <message> <location filename="../src/wallet/wallet2.cpp" line="460"/> - <source>Enter new wallet password</source> + <source>Enter new password for the wallet</source> <translation>Entrez le mot de passe du portefeuille</translation> </message> <message> @@ -2701,14 +2701,14 @@ Sorties par * : </translation> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1789"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1814"/> - <source>Storing wallet...</source> + <source>Saving wallet...</source> <translation>Sauvegarde du portefeuille...</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1791"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1816"/> - <source>Stored ok</source> - <translation>Sauvegarde OK</translation> + <source>Saved ok</source> + <translation>Sauvegarde réussie</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1794"/> @@ -2722,22 +2722,22 @@ Sorties par * : </translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1805"/> - <source>Failed to initialize wallet rpc server</source> + <source>Failed to initialize wallet RPC server</source> <translation>Échec de l'initialisation du serveur RPC du portefeuille</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1809"/> - <source>Starting wallet rpc server</source> + <source>Starting wallet RPC server</source> <translation>Démarrage du serveur RPC du portefeuille</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1811"/> - <source>Stopped wallet rpc server</source> + <source>Stopped wallet RPC server</source> <translation>Arrêt du serveur RPC du portefeuille</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1820"/> - <source>Failed to store wallet: </source> + <source>Failed to save wallet: </source> <translation>Échec de la sauvegarde du portefeuille : </translation> </message> </context> diff --git a/translations/monero_it.ts b/translations/monero_it.ts index 8ee3277fa..128db9bdc 100644 --- a/translations/monero_it.ts +++ b/translations/monero_it.ts @@ -414,8 +414,8 @@ <name>cryptonote::rpc_args</name> <message> <location filename="../src/rpc/rpc_args.cpp" line="38"/> - <source>Specify ip to bind rpc server</source> - <translation>Specificare ip da associare al server rpc</translation> + <source>Specify IP to bind RPC server</source> + <translation>Specificare IP da associare al server RPC</translation> </message> <message> <location filename="../src/rpc/rpc_args.cpp" line="39"/> @@ -527,8 +527,8 @@ </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="710"/> - <source>sweep_below <amount_threshold> [mixin] address [payment_id] - Send all unlocked outputs below the threshold to an address</source> - <translation>sweep_below <amount_threshold> [mixin] address [payment_id] - Invia tutti gli outputs sbloccati sotto la soglia specificata a un indirizzo</translation> + <source>sweep_below <amount_threshold> [mixin] address [<payment_id>] - Send all unlocked outputs below the threshold to an address</source> + <translation>sweep_below <amount_threshold> [mixin] address [<payment_id>] - Invia tutti gli outputs sbloccati sotto la soglia specificata a un indirizzo</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="727"/> @@ -887,7 +887,7 @@ Questa transazione verrà sbloccata al blocco %llu, in approssimativamente %s gi </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="3137"/> - <source>daemon is busy. Please try later</source> + <source>daemon is busy. Please try again later</source> <translation>il daemon è occupato. Prova più tardi</translation> </message> <message> @@ -922,13 +922,13 @@ Questa transazione verrà sbloccata al blocco %llu, in approssimativamente %s gi </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="525"/> - <source>priority must be 0, 1, 2, 3,or 4</source> - <translation>la priorità deve essere 0, 1, 2, 3,or 4</translation> + <source>priority must be 0, 1, 2, 3, or 4</source> + <translation>la priorità deve essere 0, 1, 2, 3, or 4</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="540"/> - <source>priority must be 0, 1, 2 3,or 4</source> - <translation>la priorità deve essere 0, 1, 2 3, or 4</translation> + <source>priority must be 0, 1, 2, 3, or 4</source> + <translation>la priorità deve essere 0, 1, 2, 3, or 4</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="623"/> @@ -952,8 +952,8 @@ Questa transazione verrà sbloccata al blocco %llu, in approssimativamente %s gi </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="709"/> - <source>sweep_all [mixin] address [payment_id] - Send all unlocked balance to an address</source> - <translation>sweep_all [mixin] address [payment_id] - Manda tutto il bilancio sbloccato ad un indirizzo</translation> + <source>sweep_all [mixin] address [<payment_id>] - Send all unlocked balance to an address</source> + <translation>sweep_all [mixin] address [<payment_id>] - Manda tutto il bilancio sbloccato ad un indirizzo</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="711"/> @@ -1115,8 +1115,8 @@ Questa transazione verrà sbloccata al blocco %llu, in approssimativamente %s gi </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1887"/> - <source>expected at least one payment_id</source> - <translation>deve esserci almeno un payment_id</translation> + <source>expected at least one payment ID</source> + <translation>deve esserci almeno un payment ID</translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1896"/> @@ -1336,7 +1336,7 @@ Avviso: alcune chiavi di input spese vengono da </translation> </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="706"/> - <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> + <source>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included)</source> <translation>transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> è la priorità della transazione. Maggiore è la priorità, maggiori saranno le tasse per la transazione. Valori validi in ordini di priorità (dal più basso al più alto) sono:unimportant, normal, elevated, priority. se omesso, verrà usato il valore standard (vedi il comando "set priority"). <mixin_count> è il numero di inputs extra da inludere per intracciabilità. Puoi eseguire pagamenti multipli in una volta aggiungendo <address_2> <amount_2> etcetera (prima dell' ID pagamento, se incluso)</translation> </message> <message> @@ -1608,7 +1608,7 @@ Avviso: alcune chiavi di input spese vengono da </translation> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="1306"/> <location filename="../src/simplewallet/simplewallet.cpp" line="1311"/> - <source>invalid language choice passed. Please try again. + <source>invalid language choice entered. Please try again. </source> <translation>linguaggio selezionato scorretto. Prova di nuovo.</translation> </message> @@ -1755,7 +1755,7 @@ di nuovo il tuo portafoglio (le chiavi del tuo portafoglio NON sono a rischio in </message> <message> <location filename="../src/simplewallet/simplewallet.cpp" line="2921"/> - <source>missing amount threshold</source> + <source>missing threshold amount</source> <translation>manca la soglia massima dell'ammontare</translation> </message> <message> @@ -2512,7 +2512,7 @@ Outputs per *: </source> </message> <message> <location filename="../src/wallet/wallet2.cpp" line="460"/> - <source>Enter new wallet password</source> + <source>Enter new password for the wallet</source> <translation>Inserisci una nuova password per il portafoglio</translation> </message> <message> @@ -2670,13 +2670,13 @@ Outputs per *: </source> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1789"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1814"/> - <source>Storing wallet...</source> + <source>Saving wallet...</source> <translation>Sto salvando il portafoglio...</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1791"/> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1816"/> - <source>Stored ok</source> + <source>Saved ok</source> <translation>Salvato con successo</translation> </message> <message> @@ -2691,22 +2691,22 @@ Outputs per *: </source> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1805"/> - <source>Failed to initialize wallet rpc server</source> - <translation>Inizializzazione server rpc portafoglio fallita</translation> + <source>Failed to initialize wallet RPC server</source> + <translation>Inizializzazione server RPC portafoglio fallita</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1809"/> - <source>Starting wallet rpc server</source> + <source>Starting wallet RPC server</source> <translation>Server RPC portafoglio in avvio</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1811"/> - <source>Stopped wallet rpc server</source> + <source>Stopped wallet RPC server</source> <translation>Server RPC portafoglio arrestato</translation> </message> <message> <location filename="../src/wallet/wallet_rpc_server.cpp" line="1820"/> - <source>Failed to store wallet: </source> + <source>Failed to save wallet: </source> <translation>Impossibile salvare portafoglio: </translation> </message> </context> |