diff options
Diffstat (limited to 'README.md')
-rw-r--r-- | README.md | 49 |
1 files changed, 34 insertions, 15 deletions
@@ -89,9 +89,15 @@ As with many development projects, the repository on Github is considered to be Monero is a 100% community-sponsored endeavor. If you want to join our efforts, the easiest thing you can do is support the project financially. Both Monero and Bitcoin donations can be made to **donate.getmonero.org** if using a client that supports the [OpenAlias](https://openalias.org) standard. Alternatively, you can send XMR to the Monero donation address via the `donate` command (type `help` in the command-line wallet for details). -The Monero donation address is: `888tNkZrPN6JsEgekjMnABU4TBzc2Dt29EPAvkRxbANsAnjyPbb3iQ1YBRk1UXcdRsiKc9dhwMVgN5S9cQUiyoogDavup3H` (viewkey: `f359631075708155cc3d92a32b75a7d02a5dcf27756707b47a2b31b21c389501`; base address for restoring with address and viewkey: `44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A`) +The Monero donation address is: +`888tNkZrPN6JsEgekjMnABU4TBzc2Dt29EPAvkRxbANsAnjyPbb3iQ1YBRk1UXcdRsiKc9dhwMVgN5S9cQUiyoogDavup3H` +Viewkey: +`f359631075708155cc3d92a32b75a7d02a5dcf27756707b47a2b31b21c389501` +Base address for restoring with address and viewkey: +`44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A` -The Bitcoin donation address is: `1KTexdemPdxSBcG55heUuTjDRYqbC5ZL8H` +The Bitcoin donation address is: +`1KTexdemPdxSBcG55heUuTjDRYqbC5ZL8H` Core development funding and/or some supporting services are also graciously provided by [sponsors](https://www.getmonero.org/community/sponsorships/): @@ -130,8 +136,8 @@ Dates are provided in the format YYYY-MM-DD. | 1788000 | 2019-03-09 | v10 | v0.14.0.0 | v0.14.1.2 | New PoW based on Cryptonight-R, new block weight algorithm, slightly more efficient RingCT format | 1788720 | 2019-03-10 | v11 | v0.14.0.0 | v0.14.1.2 | forbid old RingCT transaction format | 1978433 | 2019-11-30 | v12 | v0.15.0.0 | v0.16.0.0 | New PoW based on RandomX, only allow >= 2 outputs, change to the block median used to calculate penalty, v1 coinbases are forbidden, rct sigs in coinbase forbidden, 10 block lock time for incoming outputs -| 2210000 | 2020-10-17 | v13 | v0.17.0.0 | v0.17.1.1 | New CLSAG transaction format -| 2210720 | 2020-10-18 | v14 | v0.17.1.1 | v0.17.1.7 | forbid old MLSAG transaction format +| 2210000 | 2020-10-17 | v13 | v0.17.0.0 | v0.17.3.2 | New CLSAG transaction format +| 2210720 | 2020-10-18 | v14 | v0.17.1.1 | v0.17.3.2 | forbid old MLSAG transaction format | XXXXXXX | XXX-XX-XX | XXX | vX.XX.X.X | vX.XX.X.X | XXX | X's indicate that these details have not been determined as of commit date. @@ -181,7 +187,7 @@ library archives (`.a`). | libusb | ? | NO | `libusb-1.0-0-dev` | `libusb` | `libusb-devel` | `libusbx-devel` | YES | Hardware wallet | | libprotobuf | ? | NO | `libprotobuf-dev` | `protobuf` | `protobuf-devel` | `protobuf-devel` | YES | Hardware wallet | | protoc | ? | NO | `protobuf-compiler` | `protobuf` | `protobuf` | `protobuf-compiler` | YES | Hardware wallet | -| libudev | ? | No | `libudev-dev` | `systemd` | `eudev-libudev-devel` | `systemd-devel` | YES | Hardware wallet | +| libudev | ? | NO | `libudev-dev` | `systemd` | `eudev-libudev-devel` | `systemd-devel` | YES | Hardware wallet | [1] On Debian/Ubuntu `libgtest-dev` only includes sources and headers. You must build the library binary manually. This can be done with the following command `sudo apt-get install libgtest-dev && cd /usr/src/gtest && sudo cmake . && sudo make` @@ -197,7 +203,17 @@ then: Install all dependencies at once on Debian/Ubuntu: ``` -sudo apt update && sudo apt install build-essential cmake pkg-config libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev libpgm-dev qttools5-dev-tools libhidapi-dev libusb-1.0-0-dev libprotobuf-dev protobuf-compiler libudev-dev libboost-chrono-dev libboost-date-time-dev libboost-filesystem-dev libboost-locale-dev libboost-program-options-dev libboost-regex-dev libboost-serialization-dev libboost-system-dev libboost-thread-dev ccache doxygen graphviz +sudo apt update && sudo apt install build-essential cmake pkg-config libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev libpgm-dev qttools5-dev-tools libhidapi-dev libusb-1.0-0-dev libprotobuf-dev protobuf-compiler libudev-dev libboost-chrono-dev libboost-date-time-dev libboost-filesystem-dev libboost-locale-dev libboost-program-options-dev libboost-regex-dev libboost-serialization-dev libboost-system-dev libboost-thread-dev python3 ccache doxygen graphviz +``` + +Install all dependencies at once on Arch: +``` +sudo pacman -Syu --needed base-devel cmake boost openssl zeromq libpgm unbound libsodium libunwind xz readline ldns expat gtest python3 ccache doxygen graphviz qt5-tools hidapi libusb protobuf systemd +``` + +Install all dependencies at once on Fedora: +``` +sudo dnf install gcc gcc-c++ cmake pkgconf boost-devel openssl-devel zeromq-devel openpgm-devel unbound-devel libsodium-devel libunwind-devel xz-devel readline-devel ldns-devel expat-devel gtest-devel ccache doxygen graphviz qt5-linguist hidapi-devel libusbx-devel protobuf-devel protobuf-compiler systemd-devel ``` Install all dependencies at once on openSUSE: @@ -259,7 +275,7 @@ invokes cmake commands as needed. *Note*: The instructions above will compile the most stable release of the Monero software. If you would like to use and test the most recent software, - use ```git checkout master```. The master branch may contain updates that are + use `git checkout master`. The master branch may contain updates that are both unstable and incompatible with release software, though testing is always encouraged. @@ -327,7 +343,7 @@ Tested on a Raspberry Pi Zero with a clean install of minimal Raspbian Stretch ( ```bash git clone https://github.com/monero-project/monero.git cd monero - git checkout tags/v0.17.1.0 + git checkout v0.17.3.2 ``` * Build: @@ -446,10 +462,10 @@ application. cd monero ``` -* If you would like a specific [version/tag](https://github.com/monero-project/monero/tags), do a git checkout for that version. eg. 'v0.17.1.0'. If you don't care about the version and just want binaries from master, skip this step: +* If you would like a specific [version/tag](https://github.com/monero-project/monero/tags), do a git checkout for that version. eg. 'v0.17.3.2'. If you don't care about the version and just want binaries from master, skip this step: ```bash - git checkout v0.17.1.0 + git checkout v0.17.3.2 ``` * If you are on a 64-bit system, run: @@ -586,8 +602,11 @@ Packages are available for ``` More info and versions in the [Debian package tracker](https://tracker.debian.org/pkg/monero). -* Arch Linux (via Community packages): - [`monero`](https://www.archlinux.org/packages/community/x86_64/monero/) +* Arch Linux [(via Community packages)](https://www.archlinux.org/packages/community/x86_64/monero/): + + ```bash + sudo pacman -S monero + ``` * Void Linux: @@ -611,7 +630,7 @@ More info and versions in the [Debian package tracker](https://tracker.debian.or emerge net-p2p/monero ``` -* macOS (homebrew) +* macOS [(homebrew)](https://brew.sh/) ```bash brew install monero ``` @@ -633,7 +652,7 @@ More info and versions in the [Debian package tracker](https://tracker.debian.or ``` * The build needs 3 GB space. -* Wait one hour or more +* Wait one hour or more Packaging for your favorite distribution would be a welcome contribution! @@ -726,7 +745,7 @@ DNS_PUBLIC=tcp torsocks ./monerod --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip ## Pruning -As of May 2020, the full Monero blockchain file is about 100 GB. One can store a pruned blockchain, which is about 30 GB. +As of April 2022, the full Monero blockchain file is about 130 GB. One can store a pruned blockchain, which is about 45 GB. A pruned blockchain can only serve part of the historical chain data to other peers, but is otherwise identical in functionality to the full blockchain. To use a pruned blockchain, it is best to start the initial sync with `--prune-blockchain`. However, it is also possible |