/*
* daemon/daemon.c - collection of workers that handles requests.
*
* Copyright (c) 2007, NLnet Labs. All rights reserved.
*
* This software is open source.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of the NLNET LABS nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \file
*
* The daemon consists of global settings and a number of workers.
*/
#include "config.h"
#ifdef HAVE_OPENSSL_ERR_H
#include <openssl/err.h>
#endif
#ifdef HAVE_OPENSSL_RAND_H
#include <openssl/rand.h>
#endif
#ifdef HAVE_OPENSSL_CONF_H
#include <openssl/conf.h>
#endif
#ifdef HAVE_OPENSSL_ENGINE_H
#include <openssl/engine.h>
#endif
#ifdef HAVE_TIME_H
#include <time.h>
#endif
#include <sys/time.h>
#ifdef HAVE_NSS
/* nss3 */
#include "nss.h"
#endif
#include "daemon/daemon.h"
#include "daemon/worker.h"
#include "daemon/remote.h"
#include "daemon/acl_list.h"
#include "util/log.h"
#include "util/config_file.h"
#include "util/data/msgreply.h"
#include "util/shm_side/shm_main.h"
#include "util/storage/lookup3.h"
#include "util/storage/slabhash.h"
#include "services/listen_dnsport.h"
#include "services/cache/rrset.h"
#include "services/cache/infra.h"
#include "services/localzone.h"
#include "services/view.h"
#include "services/modstack.h"
#include "util/module.h"
#include "util/random.h"
#include "util/tube.h"
#include "util/net_help.h"
#include "sldns/keyraw.h"
#include "respip/respip.h"
#include <signal.h>
#ifdef HAVE_SYSTEMD
#include <systemd/sd-daemon.h>
#endif
/** How many quit requests happened. */
static int sig_record_quit = 0;
/** How many reload requests happened. */
static int sig_record_reload = 0;
#if HAVE_DECL_SSL_COMP_GET_COMPRESSION_METHODS
/** cleaner ssl memory freeup */
static void* comp_meth = NULL;
#endif
#ifdef LEX_HAS_YYLEX_DESTROY
/** remove buffers for parsing and init */
int ub_c_lex_destroy(void);
#endif
/** used when no other sighandling happens, so we don't die
* when multiple signals in quick succession are sent to us.
* @param sig: signal number.
* @return signal handler return type (void or int).
*/
static RETSIGTYPE record_sigh(int sig)
{
#ifdef LIBEVENT_SIGNAL_PROBLEM
/* cannot log, verbose here because locks may be held */
/* quit on signal, no cleanup and statistics,
because installed libevent version is not threadsafe */
exit(0);
#endif
switch(sig)
{
case SIGTERM:
#ifdef SIGQUIT
case SIGQUIT:
#endif
#ifdef SIGBREAK
case SIGBREAK:
#endif
case SIGINT:
sig_record_quit++;
break;
#ifdef SIGHUP
case SIGHUP:
sig_record_reload++;
break;
#endif
#ifdef SIGPIPE
case SIGPIPE:
break;
#endif
default:
/* ignoring signal */
break;
}
}
/**
* Signal handling during the time when netevent is disabled.
* Stores signals to replay later.
*/
static void
signal_handling_record(void)
{
if( signal(SIGTERM, record_sigh) == SIG_ERR ||
#ifdef SIGQUIT
signal(SIGQUIT, record_sigh) == SIG_ERR ||
#endif
#ifdef SIGBREAK
signal(SIGBREAK, record_sigh) == SIG_ERR ||
#endif
#ifdef SIGHUP
signal(SIGHUP, record_sigh) == SIG_ERR ||
#endif
#ifdef SIGPIPE
signal(SIGPIPE, SIG_IGN) == SIG_ERR ||
#endif
signal(SIGINT, record_sigh) == SIG_ERR
)
log_err("install sighandler: %s", strerror(errno));
}
/**
* Replay old signals.
* @param wrk: worker that handles signals.
*/
static void
signal_handling_playback(struct worker* wrk)
{
#ifdef SIGHUP
if(sig_record_reload) {
# ifdef HAVE_SYSTEMD
sd_notify(0, "RELOADING=1");
# endif
worker_sighandler(SIGHUP, wrk);
# ifdef HAVE_SYSTEMD
sd_notify(0, "READY=1");
# endif
}
#endif
if(sig_record_quit)
worker_sighandler(SIGTERM, wrk);
sig_record_quit = 0;
sig_record_reload = 0;
}
struct daemon*
daemon_init(void)
{
struct daemon* daemon = (struct daemon*)calloc(1,
sizeof(struct daemon));
#ifdef USE_WINSOCK
int r;
WSADATA wsa_data;
#endif
if(!daemon)
return NULL;
#ifdef USE_WINSOCK
r = WSAStartup(MAKEWORD(2,2), &wsa_data);
if(r != 0) {
fatal_exit("could not init winsock. WSAStartup: %s",
wsa_strerror(r));
}
#endif /* USE_WINSOCK */
signal_handling_record();
checklock_start();
#ifdef HAVE_SSL
# ifdef HAVE_ERR_LOAD_CRYPTO_STRINGS
ERR_load_crypto_strings();
# endif
ERR_load_SSL_strings();
# ifdef USE_GOST
(void)sldns_key_EVP_load_gost_id();
# endif
# if OPENSSL_VERSION_NUMBER < 0x10100000 || !defined(HAVE_OPENSSL_INIT_CRYPTO)
OpenSSL_add_all_algorithms();
# else
OPENSSL_init_crypto(OPENSSL_INIT_ADD_ALL_CIPHERS
| OPENSSL_INIT_ADD_ALL_DIGESTS
| OPENSSL_INIT_LOAD_CRYPTO_STRINGS, NULL);
# endif
# if HAVE_DECL_SSL_COMP_GET_COMPRESSION_METHODS
/* grab the COMP method ptr because openssl leaks it */
comp_meth = (void*)SSL_COMP_get_compression_methods();
# endif
# if OPENSSL_VERSION_NUMBER < 0x10100000 || !defined(HAVE_OPENSSL_INIT_SSL)
(void)SSL_library_init();
# else
(void)OPENSSL_init_ssl(0, NULL);
# endif
# if defined(HAVE_SSL) && defined(OPENSSL_THREADS) && !defined(THREADS_DISABLED)
if(!ub_openssl_lock_init())
fatal_exit("could not init openssl locks");
# endif
#elif defined(HAVE_NSS)
if(NSS_NoDB_Init(NULL) != SECSuccess)
fatal_exit("could not init NSS");
#endif /* HAVE_SSL or HAVE_NSS */
#ifdef HAVE_TZSET
/* init timezone info while we are not chrooted yet */
tzset();
#endif
/* open /dev/random if needed */
ub_systemseed((unsigned)time(NULL)^(unsigned)getpid()^0xe67);
daemon->need_to_exit = 0;
modstack_init(&daemon->mods);
if(!(daemon->env = (struct module_env*)calloc(1,
sizeof(*daemon->env)))) {
free(daemon);
return NULL;
}
/* init edns_known_options */
if(!edns_known_options_init(daemon->env)) {
free(daemon->env);
free(daemon);
return NULL;
}
alloc_init(&daemon->superalloc, NULL, 0);
daemon->acl = acl_list_create();
if(!daemon->acl) {
edns_known_options_delete(daemon->env);
free(daemon->env);
free(daemon);
return NULL;
}
if(gettimeofday(&daemon->time_boot, NULL) < 0)
log_err("gettimeofday: %s", strerror(errno));
daemon->time_last_stat = daemon->time_boot;
return daemon;
}
int
daemon_open_shared_ports(struct daemon* daemon)
{
log_assert(daemon);
if(daemon->cfg->port != daemon->listening_port) {
size_t i;
struct listen_port* p0;
daemon->reuseport = 0;
/* free and close old ports */
if(daemon->ports != NULL) {
for(i=0; i<daemon->num_ports; i++)
listening_ports_free(daemon->ports[i]);
free(daemon->ports);
daemon->ports = NULL;
}
/* see if we want to reuseport */
#ifdef SO_REUSEPORT
if(daemon->cfg->so_reuseport && daemon->cfg->num_threads > 0)
daemon->reuseport = 1;
#endif
/* try to use reuseport */
p0 = listening_ports_open(daemon->cfg, &daemon->reuseport);
if(!p0) {
listening_ports_free(p0);
return 0;
}
if(daemon->reuseport) {
/* reuseport was successful, allocate for it */
daemon->num_ports = (size_t)daemon->cfg->num_threads;
} else {
/* do the normal, singleportslist thing,
* reuseport not enabled or did not work */
daemon->num_ports = 1;
}
if(!(daemon->ports = (struct listen_port**)calloc(
daemon->num_ports, sizeof(*daemon->ports)))) {
listening_ports_free(p0);
return 0;
}
daemon->ports[0] = p0;
if(daemon->reuseport) {
/* continue to use reuseport */
for(i=1; i<daemon->num_ports; i++) {
if(!(daemon->ports[i]=
listening_ports_open(daemon->cfg,
&daemon->reuseport))
|| !daemon->reuseport ) {
for(i=0; i<daemon->num_ports; i++)
listening_ports_free(daemon->ports[i]);
free(daemon->ports);
daemon->ports = NULL;
return 0;
}
}
}
daemon->listening_port = daemon->cfg->port;
}
if(!daemon->cfg->remote_control_enable && daemon->rc_port) {
listening_ports_free(daemon->rc_ports);
daemon->rc_ports = NULL;
daemon->rc_port = 0;
}
if(daemon->cfg->remote_control_enable &&
daemon->cfg->control_port != daemon->rc_port) {
listening_ports_free(daemon->rc_ports);
if(!(daemon->rc_ports=daemon_remote_open_ports(daemon->cfg)))
return 0;
daemon->rc_port = daemon->cfg->control_port;
}
return 1;
}
/**
* Setup modules. setup module stack.
* @param daemon: the daemon
*/
static void daemon_setup_modules(struct daemon* daemon)
{
daemon->env->cfg = daemon->cfg;
daemon->env->alloc = &daemon->superalloc;
daemon->env->worker = NULL;
daemon->env->need_to_validate = 0; /* set by module init below */
if(!modstack_setup(&daemon->mods, daemon->cfg->module_conf,
daemon->env)) {
fatal_exit("failed to setup modules");
}
log_edns_known_options(VERB_ALGO, daemon->env);
}
/**
* Obtain allowed port numbers, concatenate the list, and shuffle them
* (ready to be handed out to threads).
* @param daemon: the daemon. Uses rand and cfg.
* @param shufport: the portlist output.
* @return number of ports available.
*/
static int daemon_get_shufport(struct daemon* daemon, int* shufport)
{
int i, n, k, temp;
int avail = 0;
for(i=0; i<65536; i++) {
if(daemon->cfg->outgoing_avail_ports[i]) {
shufport[avail++] = daemon->cfg->
outgoing_avail_ports[i];
}
}
if(avail == 0)
fatal_exit("no ports are permitted for UDP, add "
"with outgoing-port-permit");
/* Knuth shuffle */
n = avail;
while(--n > 0) {
k = ub_random_max(daemon->rand, n+1); /* 0<= k<= n */
temp = shufport[k];
shufport[k] = shufport[n];
shufport[n] = temp;
}
return avail;
}
/**
* Allocate empty worker structures. With backptr and thread-number,
* from 0..numthread initialised. Used as user arguments to new threads.
* Creates the daemon random generator if it does not exist yet.
* The random generator stays existing between reloads with a unique state.
* @param daemon: the daemon with (new) config settings.
*/
static void
daemon_create_workers(struct daemon* daemon)
{
int i, numport;
int* shufport;
log_assert(daemon && daemon->cfg);
if(!daemon->rand) {
unsigned int seed = (unsigned int)time(NULL) ^
(unsigned int)getpid() ^ 0x438;
daemon->rand = ub_initstate(seed, NULL);
if(!daemon->rand)
fatal_exit("could not init random generator");
}
hash_set_raninit((uint32_t)ub_random(daemon->rand));
shufport = (int*)calloc(65536, sizeof(int));
if(!shufport)
fatal_exit("out of memory during daemon init");
numport = daemon_get_shufport(daemon, shufport);
verbose(VERB_ALGO, "total of %d outgoing ports available", numport);
daemon->num = (daemon->cfg->num_threads?daemon->cfg->num_threads:1);
if(daemon->reuseport && (int)daemon->num < (int)daemon->num_ports) {
log_warn("cannot reduce num-threads to %d because so-reuseport "
"so continuing with %d threads.", (int)daemon->num,
(int)daemon->num_ports);
daemon->num = (int)daemon->num_ports;
}
daemon->workers = (struct worker**)calloc((size_t)daemon->num,
sizeof(struct worker*));
if(!daemon->workers)
fatal_exit("out of memory during daemon init");
if(daemon->cfg->dnstap) {
#ifdef USE_DNSTAP
daemon->dtenv = dt_create(daemon->cfg->dnstap_socket_path,
(unsigned int)daemon->num);
if (!daemon->dtenv)
fatal_exit("dt_create failed");
dt_apply_cfg(daemon->dtenv, daemon->cfg);
#else
fatal_exit("dnstap enabled in config but not built with dnstap support");
#endif
}
for(i=0; i<daemon->num; i++) {
if(!(daemon->workers[i] = worker_create(daemon, i,
shufport+numport*i/daemon->num,
numport*(i+1)/daemon->num - numport*i/daemon->num)))
/* the above is not ports/numthr, due to rounding */
fatal_exit("could not create worker");
}
free(shufport);
}
#ifdef THREADS_DISABLED
/**
* Close all pipes except for the numbered thread.
* @param daemon: daemon to close pipes in.
* @param thr: thread number 0..num-1 of thread to skip.
*/
static void close_other_pipes(struct daemon* daemon, int thr)
{
int i;
for(i=0; i<daemon->num; i++)
if(i!=thr) {
if(i==0) {
/* only close read part, need to write stats */
tube_close_read(daemon->workers[i]->cmd);
} else {
/* complete close channel to others */
tube_delete(daemon->workers[i]->cmd);
daemon->workers[i]->cmd = NULL;
}
}
}
#endif /* THREADS_DISABLED */
/**
* Function to start one thread.
* @param arg: user argument.
* @return: void* user return value could be used for thread_join results.
*/
static void*
thread_start(void* arg)
{
struct worker* worker = (struct worker*)arg;
int port_num = 0;
log_thread_set(&worker->thread_num);
ub_thread_blocksigs();
#ifdef THREADS_DISABLED
/* close pipe ends used by main */
tube_close_write(worker->cmd);
close_other_pipes(worker->daemon, worker->thread_num);
#endif
#ifdef SO_REUSEPORT
if(worker->daemon->cfg->so_reuseport)
port_num = worker->thread_num % worker->daemon->num_ports;
else
port_num = 0;
#endif
if(!worker_init(worker, worker->daemon->cfg,
worker->daemon->ports[port_num], 0))
fatal_exit("Could not initialize thread");
worker_work(worker);
return NULL;
}
/**
* Fork and init the other threads. Main thread returns for special handling.
* @param daemon: the daemon with other threads to fork.
*/
static void
daemon_start_others(struct daemon* daemon)
{
int i;
log_assert(daemon);
verbose(VERB_ALGO, "start threads");
/* skip i=0, is this thread */
for(i=1; i<daemon->num; i++) {
ub_thread_create(&daemon->workers[i]->thr_id,
thread_start, daemon->workers[i]);
#ifdef THREADS_DISABLED
/* close pipe end of child */
tube_close_read(daemon->workers[i]->cmd);
#endif /* no threads */
}
}
/**
* Stop the other threads.
* @param daemon: the daemon with other threads.
*/
static void
daemon_stop_others(struct daemon* daemon)
{
int i;
log_assert(daemon);
verbose(VERB_ALGO, "stop threads");
/* skip i=0, is this thread */
/* use i=0 buffer for sending cmds; because we are #0 */
for(i=1; i<daemon->num; i++) {
worker_send_cmd(daemon->workers[i], worker_cmd_quit);
}
/* wait for them to quit */
for(i=1; i<daemon->num; i++) {
/* join it to make sure its dead */
verbose(VERB_ALGO, "join %d", i);
ub_thread_join(daemon->workers[i]->thr_id);
verbose(VERB_ALGO, "join success %d", i);
}
}
void
daemon_fork(struct daemon* daemon)
{
int have_view_respip_cfg = 0;
log_assert(daemon);
if(!(daemon->views = views_create()))
fatal_exit("Could not create views: out of memory");
/* create individual views and their localzone/data trees */
if(!views_apply_cfg(daemon->views, daemon->cfg))
fatal_exit("Could not set up views");
if(!acl_list_apply_cfg(daemon->acl, daemon->cfg, daemon->views))
fatal_exit("Could not setup access control list");
if(daemon->cfg->dnscrypt) {
#ifdef USE_DNSCRYPT
daemon->dnscenv = dnsc_create();
if (!daemon->dnscenv)
fatal_exit("dnsc_create failed");
dnsc_apply_cfg(daemon->dnscenv, daemon->cfg);
#else
fatal_exit("dnscrypt enabled in config but unbound was not built with "
"dnscrypt support");
#endif
}
/* create global local_zones */
if(!(daemon->local_zones = local_zones_create()))
fatal_exit("Could not create local zones: out of memory");
if(!local_zones_apply_cfg(daemon->local_zones, daemon->cfg))
fatal_exit("Could not set up local zones");
/* process raw response-ip configuration data */
if(!(daemon->respip_set = respip_set_create()))
fatal_exit("Could not create response IP set");
if(!respip_global_apply_cfg(daemon->respip_set, daemon->cfg))
fatal_exit("Could not set up response IP set");
if(!respip_views_apply_cfg(daemon->views, daemon->cfg,
&have_view_respip_cfg))
fatal_exit("Could not set up per-view response IP sets");
daemon->use_response_ip = !respip_set_is_empty(daemon->respip_set) ||
have_view_respip_cfg;
/* setup modules */
daemon_setup_modules(daemon);
/* response-ip-xxx options don't work as expected without the respip
* module. To avoid run-time operational surprise we reject such
* configuration. */
if(daemon->use_response_ip &&
modstack_find(&daemon->mods, "respip") < 0)
fatal_exit("response-ip options require respip module");
/* first create all the worker structures, so we can pass
* them to the newly created threads.
*/
daemon_create_workers(daemon);
#if defined(HAVE_EV_LOOP) || defined(HAVE_EV_DEFAULT_LOOP)
/* in libev the first inited base gets signals */
if(!worker_init(daemon->workers[0], daemon->cfg, daemon->ports[0], 1))
fatal_exit("Could not initialize main thread");
#endif
/* Now create the threads and init the workers.
* By the way, this is thread #0 (the main thread).
*/
daemon_start_others(daemon);
/* Special handling for the main thread. This is the thread
* that handles signals and remote control.
*/
#if !(defined(HAVE_EV_LOOP) || defined(HAVE_EV_DEFAULT_LOOP))
/* libevent has the last inited base get signals (or any base) */
if(!worker_init(daemon->workers[0], daemon->cfg, daemon->ports[0], 1))
fatal_exit("Could not initialize main thread");
#endif
signal_handling_playback(daemon->workers[0]);
if (!shm_main_init(daemon))
log_warn("SHM has failed");
/* Start resolver service on main thread. */
#ifdef HAVE_SYSTEMD
sd_notify(0, "READY=1");
#endif
log_info("start of service (%s).", PACKAGE_STRING);
worker_work(daemon->workers[0]);
#ifdef HAVE_SYSTEMD
sd_notify(0, "STOPPING=1");
#endif
log_info("service stopped (%s).", PACKAGE_STRING);
/* we exited! a signal happened! Stop other threads */
daemon_stop_others(daemon);
/* Shutdown SHM */
shm_main_shutdown(daemon);
daemon->need_to_exit = daemon->workers[0]->need_to_exit;
}
void
daemon_cleanup(struct daemon* daemon)
{
int i;
log_assert(daemon);
/* before stopping main worker, handle signals ourselves, so we
don't die on multiple reload signals for example. */
signal_handling_record();
log_thread_set(NULL);
/* clean up caches because
* a) RRset IDs will be recycled after a reload, causing collisions
* b) validation config can change, thus rrset, msg, keycache clear */
slabhash_clear(&daemon->env->rrset_cache->table);
slabhash_clear(daemon->env->msg_cache);
local_zones_delete(daemon->local_zones);
daemon->local_zones = NULL;
respip_set_delete(daemon->respip_set);
daemon->respip_set = NULL;
views_delete(daemon->views);
daemon->views = NULL;
/* key cache is cleared by module desetup during next daemon_fork() */
daemon_remote_clear(daemon->rc);
for(i=0; i<daemon->num; i++)
worker_delete(daemon->workers[i]);
free(daemon->workers);
daemon->workers = NULL;
daemon->num = 0;
#ifdef USE_DNSTAP
dt_delete(daemon->dtenv);
#endif
daemon->cfg = NULL;
}
void
daemon_delete(struct daemon* daemon)
{
size_t i;
if(!daemon)
return;
modstack_desetup(&daemon->mods, daemon->env);
daemon_remote_delete(daemon->rc);
for(i = 0; i < daemon->num_ports; i++)
listening_ports_free(daemon->ports[i]);
free(daemon->ports);
listening_ports_free(daemon->rc_ports);
if(daemon->env) {
slabhash_delete(daemon->env->msg_cache);
rrset_cache_delete(daemon->env->rrset_cache);
infra_delete(daemon->env->infra_cache);
edns_known_options_delete(daemon->env);
}
ub_randfree(daemon->rand);
alloc_clear(&daemon->superalloc);
acl_list_delete(daemon->acl);
free(daemon->chroot);
free(daemon->pidfile);
free(daemon->env);
#ifdef HAVE_SSL
SSL_CTX_free((SSL_CTX*)daemon->listen_sslctx);
SSL_CTX_free((SSL_CTX*)daemon->connect_sslctx);
#endif
free(daemon);
#ifdef LEX_HAS_YYLEX_DESTROY
/* lex cleanup */
ub_c_lex_destroy();
#endif
/* libcrypto cleanup */
#ifdef HAVE_SSL
# if defined(USE_GOST) && defined(HAVE_LDNS_KEY_EVP_UNLOAD_GOST)
sldns_key_EVP_unload_gost();
# endif
# if HAVE_DECL_SSL_COMP_GET_COMPRESSION_METHODS && HAVE_DECL_SK_SSL_COMP_POP_FREE
# ifndef S_SPLINT_S
# if OPENSSL_VERSION_NUMBER < 0x10100000
sk_SSL_COMP_pop_free(comp_meth, (void(*)())CRYPTO_free);
# endif
# endif
# endif
# ifdef HAVE_OPENSSL_CONFIG
EVP_cleanup();
# if OPENSSL_VERSION_NUMBER < 0x10100000
ENGINE_cleanup();
# endif
CONF_modules_free();
# endif
# ifdef HAVE_CRYPTO_CLEANUP_ALL_EX_DATA
CRYPTO_cleanup_all_ex_data(); /* safe, no more threads right now */
# endif
# ifdef HAVE_ERR_FREE_STRINGS
ERR_free_strings();
# endif
# if OPENSSL_VERSION_NUMBER < 0x10100000
RAND_cleanup();
# endif
# if defined(HAVE_SSL) && defined(OPENSSL_THREADS) && !defined(THREADS_DISABLED)
ub_openssl_lock_delete();
# endif
#elif defined(HAVE_NSS)
NSS_Shutdown();
#endif /* HAVE_SSL or HAVE_NSS */
checklock_stop();
#ifdef USE_WINSOCK
if(WSACleanup() != 0) {
log_err("Could not WSACleanup: %s",
wsa_strerror(WSAGetLastError()));
}
#endif
}
void daemon_apply_cfg(struct daemon* daemon, struct config_file* cfg)
{
daemon->cfg = cfg;
config_apply(cfg);
if(!daemon->env->msg_cache ||
cfg->msg_cache_size != slabhash_get_size(daemon->env->msg_cache) ||
cfg->msg_cache_slabs != daemon->env->msg_cache->size) {
slabhash_delete(daemon->env->msg_cache);
daemon->env->msg_cache = slabhash_create(cfg->msg_cache_slabs,
HASH_DEFAULT_STARTARRAY, cfg->msg_cache_size,
msgreply_sizefunc, query_info_compare,
query_entry_delete, reply_info_delete, NULL);
if(!daemon->env->msg_cache) {
fatal_exit("malloc failure updating config settings");
}
}
if((daemon->env->rrset_cache = rrset_cache_adjust(
daemon->env->rrset_cache, cfg, &daemon->superalloc)) == 0)
fatal_exit("malloc failure updating config settings");
if((daemon->env->infra_cache = infra_adjust(daemon->env->infra_cache,
cfg))==0)
fatal_exit("malloc failure updating config settings");
}