// Tencent is pleased to support the open source community by making RapidJSON available.
//
// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
//
// Licensed under the MIT License (the "License"); you may not use this file except
// in compliance with the License. You may obtain a copy of the License at
//
// http://opensource.org/licenses/MIT
//
// Unless required by applicable law or agreed to in writing, software distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
#ifndef RAPIDJSON_RAPIDJSON_H_
#define RAPIDJSON_RAPIDJSON_H_
/*!\file rapidjson.h
\brief common definitions and configuration
\see RAPIDJSON_CONFIG
*/
/*! \defgroup RAPIDJSON_CONFIG RapidJSON configuration
\brief Configuration macros for library features
Some RapidJSON features are configurable to adapt the library to a wide
variety of platforms, environments and usage scenarios. Most of the
features can be configured in terms of overriden or predefined
preprocessor macros at compile-time.
Some additional customization is available in the \ref RAPIDJSON_ERRORS APIs.
\note These macros should be given on the compiler command-line
(where applicable) to avoid inconsistent values when compiling
different translation units of a single application.
*/
#include <cstdlib> // malloc(), realloc(), free(), size_t
#include <cstring> // memset(), memcpy(), memmove(), memcmp()
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_VERSION_STRING
//
// ALWAYS synchronize the following 3 macros with corresponding variables in /CMakeLists.txt.
//
//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
// token stringification
#define RAPIDJSON_STRINGIFY(x) RAPIDJSON_DO_STRINGIFY(x)
#define RAPIDJSON_DO_STRINGIFY(x) #x
//!@endcond
/*! \def RAPIDJSON_MAJOR_VERSION
\ingroup RAPIDJSON_CONFIG
\brief Major version of RapidJSON in integer.
*/
/*! \def RAPIDJSON_MINOR_VERSION
\ingroup RAPIDJSON_CONFIG
\brief Minor version of RapidJSON in integer.
*/
/*! \def RAPIDJSON_PATCH_VERSION
\ingroup RAPIDJSON_CONFIG
\brief Patch version of RapidJSON in integer.
*/
/*! \def RAPIDJSON_VERSION_STRING
\ingroup RAPIDJSON_CONFIG
\brief Version of RapidJSON in "<major>.<minor>.<patch>" string format.
*/
#define RAPIDJSON_MAJOR_VERSION 1
#define RAPIDJSON_MINOR_VERSION 1
#define RAPIDJSON_PATCH_VERSION 0
#define RAPIDJSON_VERSION_STRING \
RAPIDJSON_STRINGIFY(RAPIDJSON_MAJOR_VERSION.RAPIDJSON_MINOR_VERSION.RAPIDJSON_PATCH_VERSION)
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_NAMESPACE_(BEGIN|END)
/*! \def RAPIDJSON_NAMESPACE
\ingroup RAPIDJSON_CONFIG
\brief provide custom rapidjson namespace
In order to avoid symbol clashes and/or "One Definition Rule" errors
between multiple inclusions of (different versions of) RapidJSON in
a single binary, users can customize the name of the main RapidJSON
namespace.
In case of a single nesting level, defining \c RAPIDJSON_NAMESPACE
to a custom name (e.g. \c MyRapidJSON) is sufficient. If multiple
levels are needed, both \ref RAPIDJSON_NAMESPACE_BEGIN and \ref
RAPIDJSON_NAMESPACE_END need to be defined as well:
\code
// in some .cpp file
#define RAPIDJSON_NAMESPACE my::rapidjson
#define RAPIDJSON_NAMESPACE_BEGIN namespace my { namespace rapidjson {
#define RAPIDJSON_NAMESPACE_END } }
#include "rapidjson/..."
\endcode
\see rapidjson
*/
/*! \def RAPIDJSON_NAMESPACE_BEGIN
\ingroup RAPIDJSON_CONFIG
\brief provide custom rapidjson namespace (opening expression)
\see RAPIDJSON_NAMESPACE
*/
/*! \def RAPIDJSON_NAMESPACE_END
\ingroup RAPIDJSON_CONFIG
\brief provide custom rapidjson namespace (closing expression)
\see RAPIDJSON_NAMESPACE
*/
#ifndef RAPIDJSON_NAMESPACE
#define RAPIDJSON_NAMESPACE rapidjson
#endif
#ifndef RAPIDJSON_NAMESPACE_BEGIN
#define RAPIDJSON_NAMESPACE_BEGIN namespace RAPIDJSON_NAMESPACE {
#endif
#ifndef RAPIDJSON_NAMESPACE_END
#define RAPIDJSON_NAMESPACE_END }
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_HAS_STDSTRING
#ifndef RAPIDJSON_HAS_STDSTRING
#ifdef RAPIDJSON_DOXYGEN_RUNNING
#define RAPIDJSON_HAS_STDSTRING 1 // force generation of documentation
#else
#define RAPIDJSON_HAS_STDSTRING 0 // no std::string support by default
#endif
/*! \def RAPIDJSON_HAS_STDSTRING
\ingroup RAPIDJSON_CONFIG
\brief Enable RapidJSON support for \c std::string
By defining this preprocessor symbol to \c 1, several convenience functions for using
\ref rapidjson::GenericValue with \c std::string are enabled, especially
for construction and comparison.
\hideinitializer
*/
#endif // !defined(RAPIDJSON_HAS_STDSTRING)
#if RAPIDJSON_HAS_STDSTRING
#include <string>
#endif // RAPIDJSON_HAS_STDSTRING
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_NO_INT64DEFINE
/*! \def RAPIDJSON_NO_INT64DEFINE
\ingroup RAPIDJSON_CONFIG
\brief Use external 64-bit integer types.
RapidJSON requires the 64-bit integer types \c int64_t and \c uint64_t types
to be available at global scope.
If users have their own definition, define RAPIDJSON_NO_INT64DEFINE to
prevent RapidJSON from defining its own types.
*/
#ifndef RAPIDJSON_NO_INT64DEFINE
//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
#if defined(_MSC_VER) && (_MSC_VER < 1800) // Visual Studio 2013
#include "msinttypes/stdint.h"
#include "msinttypes/inttypes.h"
#else
// Other compilers should have this.
#include <stdint.h>
#include <inttypes.h>
#endif
//!@endcond
#ifdef RAPIDJSON_DOXYGEN_RUNNING
#define RAPIDJSON_NO_INT64DEFINE
#endif
#endif // RAPIDJSON_NO_INT64TYPEDEF
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_FORCEINLINE
#ifndef RAPIDJSON_FORCEINLINE
//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
#if defined(_MSC_VER) && defined(NDEBUG)
#define RAPIDJSON_FORCEINLINE __forceinline
#elif defined(__GNUC__) && __GNUC__ >= 4 && defined(NDEBUG)
#define RAPIDJSON_FORCEINLINE __attribute__((always_inline))
#else
#define RAPIDJSON_FORCEINLINE
#endif
//!@endcond
#endif // RAPIDJSON_FORCEINLINE
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_ENDIAN
#define RAPIDJSON_LITTLEENDIAN 0 //!< Little endian machine
#define RAPIDJSON_BIGENDIAN 1 //!< Big endian machine
//! Endianness of the machine.
/*!
\def RAPIDJSON_ENDIAN
\ingroup RAPIDJSON_CONFIG
GCC 4.6 provided macro for detecting endianness of the target machine. But other
compilers may not have this. User can define RAPIDJSON_ENDIAN to either
\ref RAPIDJSON_LITTLEENDIAN or \ref RAPIDJSON_BIGENDIAN.
Default detection implemented with reference to
\li https://gcc.gnu.org/onlinedocs/gcc-4.6.0/cpp/Common-Predefined-Macros.html
\li http://www.boost.org/doc/libs/1_42_0/boost/detail/endian.hpp
*/
#ifndef RAPIDJSON_ENDIAN
// Detect with GCC 4.6's macro
# ifdef __BYTE_ORDER__
# if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
# define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
# elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
# define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
# else
# error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.
# endif // __BYTE_ORDER__
// Detect with GLIBC's endian.h
# elif defined(__GLIBC__)
# include <endian.h>
# if (__BYTE_ORDER == __LITTLE_ENDIAN)
# define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
# elif (__BYTE_ORDER == __BIG_ENDIAN)
# define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
# else
# error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.
# endif // __GLIBC__
// Detect with _LITTLE_ENDIAN and _BIG_ENDIAN macro
# elif defined(_LITTLE_ENDIAN) && !defined(_BIG_ENDIAN)
# define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
# elif defined(_BIG_ENDIAN) && !defined(_LITTLE_ENDIAN)
# define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
// Detect with architecture macros
# elif defined(__sparc) || defined(__sparc__) || defined(_POWER) || defined(__powerpc__) || defined(__ppc__) || defined(__hpux) || defined(__hppa) || defined(_MIPSEB) || defined(_POWER) || defined(__s390__)
# define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
# elif defined(__i386__) || defined(__alpha__) || defined(__ia64) || defined(__ia64__) || defined(_M_IX86) || defined(_M_IA64) || defined(_M_ALPHA) || defined(__amd64) || defined(__amd64__) || defined(_M_AMD64) || defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || defined(__bfin__)
# define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
# elif defined(_MSC_VER) && defined(_M_ARM)
# define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
# elif defined(RAPIDJSON_DOXYGEN_RUNNING)
# define RAPIDJSON_ENDIAN
# else
# error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.
# endif
#endif // RAPIDJSON_ENDIAN
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_64BIT
//! Whether using 64-bit architecture
#ifndef RAPIDJSON_64BIT
#if defined(__LP64__) || (defined(__x86_64__) && defined(__ILP32__)) || defined(_WIN64) || defined(__EMSCRIPTEN__)
#define RAPIDJSON_64BIT 1
#else
#define RAPIDJSON_64BIT 0
#endif
#endif // RAPIDJSON_64BIT
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_ALIGN
//! Data alignment of the machine.
/*! \ingroup RAPIDJSON_CONFIG
\param x pointer to align
Some machines require strict data alignment. Currently the default uses 4 bytes
alignment on 32-bit platforms and 8 bytes alignment for 64-bit platforms.
User can customize by defining the RAPIDJSON_ALIGN function macro.
*/
#ifndef RAPIDJSON_ALIGN
#if RAPIDJSON_64BIT == 1
#define RAPIDJSON_ALIGN(x) (((x) + static_cast<uint64_t>(7u)) & ~static_cast<uint64_t>(7u))
#else
#define RAPIDJSON_ALIGN(x) (((x) + 3u) & ~3u)
#endif
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_UINT64_C2
//! Construct a 64-bit literal by a pair of 32-bit integer.
/*!
64-bit literal with or without ULL suffix is prone to compiler warnings.
UINT64_C() is C macro which cause compilation problems.
Use this macro to define 64-bit constants by a pair of 32-bit integer.
*/
#ifndef RAPIDJSON_UINT64_C2
#define RAPIDJSON_UINT64_C2(high32, low32) ((static_cast<uint64_t>(high32) << 32) | static_cast<uint64_t>(low32))
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_48BITPOINTER_OPTIMIZATION
//! Use only lower 48-bit address for some pointers.
/*!
\ingroup RAPIDJSON_CONFIG
This optimization uses the fact that current X86-64 architecture only implement lower 48-bit virtual address.
The higher 16-bit can be used for storing other data.
\c GenericValue uses this optimization to reduce its size form 24 bytes to 16 bytes in 64-bit architecture.
*/
#ifndef RAPIDJSON_48BITPOINTER_OPTIMIZATION
#if defined(__amd64__) || defined(__amd64) || defined(__x86_64__) || defined(__x86_64) || defined(_M_X64) || defined(_M_AMD64)
#define RAPIDJSON_48BITPOINTER_OPTIMIZATION 1
#else
#define RAPIDJSON_48BITPOINTER_OPTIMIZATION 0
#endif
#endif // RAPIDJSON_48BITPOINTER_OPTIMIZATION
#if RAPIDJSON_48BITPOINTER_OPTIMIZATION == 1
#if RAPIDJSON_64BIT != 1
#error RAPIDJSON_48BITPOINTER_OPTIMIZATION can only be set to 1 when RAPIDJSON_64BIT=1
#endif
#define RAPIDJSON_SETPOINTER(type, p, x) (p = reinterpret_cast<type *>((reinterpret_cast<uintptr_t>(p) & static_cast<uintptr_t>(RAPIDJSON_UINT64_C2(0xFFFF0000, 0x00000000))) | reinterpret_cast<uintptr_t>(reinterpret_cast<const void*>(x))))
#define RAPIDJSON_GETPOINTER(type, p) (reinterpret_cast<type *>(reinterpret_cast<uintptr_t>(p) & static_cast<uintptr_t>(RAPIDJSON_UINT64_C2(0x0000FFFF, 0xFFFFFFFF))))
#else
#define RAPIDJSON_SETPOINTER(type, p, x) (p = (x))
#define RAPIDJSON_GETPOINTER(type, p) (p)
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_SSE2/RAPIDJSON_SSE42/RAPIDJSON_SIMD
/*! \def RAPIDJSON_SIMD
\ingroup RAPIDJSON_CONFIG
\brief Enable SSE2/SSE4.2 optimization.
RapidJSON supports optimized implementations for some parsing operations
based on the SSE2 or SSE4.2 SIMD extensions on modern Intel-compatible
processors.
To enable these optimizations, two different symbols can be defined;
\code
// Enable SSE2 optimization.
#define RAPIDJSON_SSE2
// Enable SSE4.2 optimization.
#define RAPIDJSON_SSE42
\endcode
\c RAPIDJSON_SSE42 takes precedence, if both are defined.
If any of these symbols is defined, RapidJSON defines the macro
\c RAPIDJSON_SIMD to indicate the availability of the optimized code.
*/
#if defined(RAPIDJSON_SSE2) || defined(RAPIDJSON_SSE42) \
|| defined(RAPIDJSON_DOXYGEN_RUNNING)
#define RAPIDJSON_SIMD
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_NO_SIZETYPEDEFINE
#ifndef RAPIDJSON_NO_SIZETYPEDEFINE
/*! \def RAPIDJSON_NO_SIZETYPEDEFINE
\ingroup RAPIDJSON_CONFIG
\brief User-provided \c SizeType definition.
In order to avoid using 32-bit size types for indexing strings and arrays,
define this preprocessor symbol and provide the type rapidjson::SizeType
before including RapidJSON:
\code
#define RAPIDJSON_NO_SIZETYPEDEFINE
namespace rapidjson { typedef ::std::size_t SizeType; }
#include "rapidjson/..."
\endcode
\see rapidjson::SizeType
*/
#ifdef RAPIDJSON_DOXYGEN_RUNNING
#define RAPIDJSON_NO_SIZETYPEDEFINE
#endif
RAPIDJSON_NAMESPACE_BEGIN
//! Size type (for string lengths, array sizes, etc.)
/*! RapidJSON uses 32-bit array/string indices even on 64-bit platforms,
instead of using \c size_t. Users may override the SizeType by defining
\ref RAPIDJSON_NO_SIZETYPEDEFINE.
*/
typedef unsigned SizeType;
RAPIDJSON_NAMESPACE_END
#endif
// always import std::size_t to rapidjson namespace
RAPIDJSON_NAMESPACE_BEGIN
using std::size_t;
RAPIDJSON_NAMESPACE_END
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_ASSERT
//! Assertion.
/*! \ingroup RAPIDJSON_CONFIG
By default, rapidjson uses C \c assert() for internal assertions.
User can override it by defining RAPIDJSON_ASSERT(x) macro.
\note Parsing errors are handled and can be customized by the
\ref RAPIDJSON_ERRORS APIs.
*/
#ifndef RAPIDJSON_ASSERT
#include <cassert>
#define RAPIDJSON_ASSERT(x) assert(x)
#endif // RAPIDJSON_ASSERT
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_STATIC_ASSERT
// Adopt from boost
#ifndef RAPIDJSON_STATIC_ASSERT
#ifndef __clang__
//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
#endif
RAPIDJSON_NAMESPACE_BEGIN
template <bool x> struct STATIC_ASSERTION_FAILURE;
template <> struct STATIC_ASSERTION_FAILURE<true> { enum { value = 1 }; };
template<int x> struct StaticAssertTest {};
RAPIDJSON_NAMESPACE_END
#define RAPIDJSON_JOIN(X, Y) RAPIDJSON_DO_JOIN(X, Y)
#define RAPIDJSON_DO_JOIN(X, Y) RAPIDJSON_DO_JOIN2(X, Y)
#define RAPIDJSON_DO_JOIN2(X, Y) X##Y
#if defined(__GNUC__)
#define RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE __attribute__((unused))
#else
#define RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE
#endif
#ifndef __clang__
//!@endcond
#endif
/*! \def RAPIDJSON_STATIC_ASSERT
\brief (Internal) macro to check for conditions at compile-time
\param x compile-time condition
\hideinitializer
*/
#define RAPIDJSON_STATIC_ASSERT(x) \
typedef ::RAPIDJSON_NAMESPACE::StaticAssertTest< \
sizeof(::RAPIDJSON_NAMESPACE::STATIC_ASSERTION_FAILURE<bool(x) >)> \
RAPIDJSON_JOIN(StaticAssertTypedef, __LINE__) RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE
#endif
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_LIKELY, RAPIDJSON_UNLIKELY
//! Compiler branching hint for expression with high probability to be true.
/*!
\ingroup RAPIDJSON_CONFIG
\param x Boolean expression likely to be true.
*/
#ifndef RAPIDJSON_LIKELY
#if defined(__GNUC__) || defined(__clang__)
#define RAPIDJSON_LIKELY(x) __builtin_expect(!!(x), 1)
#else
#define RAPIDJSON_LIKELY(x) (x)
#endif
#endif
//! Compiler branching hint for expression with low probability to be true.
/*!
\ingroup RAPIDJSON_CONFIG
\param x Boolean expression unlikely to be true.
*/
#ifndef RAPIDJSON_UNLIKELY
#if defined(__GNUC__) || defined(__clang__)
#define RAPIDJSON_UNLIKELY(x) __builtin_expect(!!(x), 0)
#else
#define RAPIDJSON_UNLIKELY(x) (x)
#endif
#endif
///////////////////////////////////////////////////////////////////////////////
// Helpers
//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
#define RAPIDJSON_MULTILINEMACRO_BEGIN do {
#define RAPIDJSON_MULTILINEMACRO_END \
} while((void)0, 0)
// adopted from Boost
#define RAPIDJSON_VERSION_CODE(x,y,z) \
(((x)*100000) + ((y)*100) + (z))
///////////////////////////////////////////////////////////////////////////////
// RAPIDJSON_DIAG_PUSH/POP, RAPIDJSON_DIAG_OFF
#if defined(__GNUC__)
#define RAPIDJSON_GNUC \
RAPIDJSON_VERSION_CODE(__GNUC__,__GNUC_MINOR__,__GNUC_PATCHLEVEL__)
#endif
#if defined(__clang__) || (defined(RAPIDJSON_GNUC) && RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,2,0))
#define RAPIDJSON_PRAGMA(x) _Pragma(RAPIDJSON_STRINGIFY(x))
#define RAPIDJSON_DIAG_PRAGMA(x) RAPIDJSON_PRAGMA(GCC diagnostic x)
#define RAPIDJSON_DIAG_OFF(x) \
RAPIDJSON_DIAG_PRAGMA(ignored RAPIDJSON_STRINGIFY(RAPIDJSON_JOIN(-W,x)))
// push/pop support in Clang and GCC>=4.6
#if defined(__clang__) || (defined(RAPIDJSON_GNUC) && RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,6,0))
#define RAPIDJSON_DIAG_PUSH RAPIDJSON_DIAG_PRAGMA(push)
#define RAPIDJSON_DIAG_POP RAPIDJSON_DIAG_PRAGMA(pop)
#else // GCC >= 4.2, < 4.6
#define RAPIDJSON_DIAG_PUSH /* ignored */
#define RAPIDJSON_DIAG_POP /* ignored */
#endif
#elif defined(_MSC_VER)
// pragma (MSVC specific)
#define RAPIDJSON_PRAGMA(x) __pragma(x)
#define RAPIDJSON_DIAG_PRAGMA(x) RAPIDJSON_PRAGMA(warning(x))
#define RAPIDJSON_DIAG_OFF(x) RAPIDJSON_DIAG_PRAGMA(disable: x)
#define RAPIDJSON_DIAG_PUSH RAPIDJSON_DIAG_PRAGMA(push)
#define RAPIDJSON_DIAG_POP RAPIDJSON_DIAG_PRAGMA(pop)
#else
#define RAPIDJSON_DIAG_OFF(x) /* ignored */
#define RAPIDJSON_DIAG_PUSH /* ignored */
#define RAPIDJSON_DIAG_POP /* ignored */
#endif // RAPIDJSON_DIAG_*
///////////////////////////////////////////////////////////////////////////////
// C++11 features
#ifndef RAPIDJSON_HAS_CXX11_RVALUE_REFS
#if defined(__clang__)
#if __has_feature(cxx_rvalue_references) && \
(defined(_LIBCPP_VERSION) || defined(__GLIBCXX__) && __GLIBCXX__ >= 20080306)
#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 1
#else
#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 0
#endif
#elif (defined(RAPIDJSON_GNUC) && (RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,3,0)) && defined(__GXX_EXPERIMENTAL_CXX0X__)) || \
(defined(_MSC_VER) && _MSC_VER >= 1600)
#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 1
#else
#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 0
#endif
#endif // RAPIDJSON_HAS_CXX11_RVALUE_REFS
#ifndef RAPIDJSON_HAS_CXX11_NOEXCEPT
#if defined(__clang__)
#define RAPIDJSON_HAS_CXX11_NOEXCEPT __has_feature(cxx_noexcept)
#elif (defined(RAPIDJSON_GNUC) && (RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,6,0)) && defined(__GXX_EXPERIMENTAL_CXX0X__))
// (defined(_MSC_VER) && _MSC_VER >= ????) // not yet supported
#define RAPIDJSON_HAS_CXX11_NOEXCEPT 1
#else
#define RAPIDJSON_HAS_CXX11_NOEXCEPT 0
#endif
#endif
#if RAPIDJSON_HAS_CXX11_NOEXCEPT
#define RAPIDJSON_NOEXCEPT noexcept
#else
#define RAPIDJSON_NOEXCEPT /* noexcept */
#endif // RAPIDJSON_HAS_CXX11_NOEXCEPT
// no automatic detection, yet
#ifndef RAPIDJSON_HAS_CXX11_TYPETRAITS
#define RAPIDJSON_HAS_CXX11_TYPETRAITS 0
#endif
#ifndef RAPIDJSON_HAS_CXX11_RANGE_FOR
#if defined(__clang__)
#define RAPIDJSON_HAS_CXX11_RANGE_FOR __has_feature(cxx_range_for)
#elif (defined(RAPIDJSON_GNUC) && (RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,3,0)) && defined(__GXX_EXPERIMENTAL_CXX0X__)) || \
(defined(_MSC_VER) && _MSC_VER >= 1700)
#define RAPIDJSON_HAS_CXX11_RANGE_FOR 1
#else
#define RAPIDJSON_HAS_CXX11_RANGE_FOR 0
#endif
#endif // RAPIDJSON_HAS_CXX11_RANGE_FOR
//!@endcond
///////////////////////////////////////////////////////////////////////////////
// new/delete
#ifndef RAPIDJSON_NEW
///! customization point for global \c new
#define RAPIDJSON_NEW(x) new x
#endif
#ifndef RAPIDJSON_DELETE
///! customization point for global \c delete
#define RAPIDJSON_DELETE(x) delete x
#endif
///////////////////////////////////////////////////////////////////////////////
// Type
/*! \namespace rapidjson
\brief main RapidJSON namespace
\see RAPIDJSON_NAMESPACE
*/
RAPIDJSON_NAMESPACE_BEGIN
//! Type of JSON value
enum Type {
kNullType = 0, //!< null
kFalseType = 1, //!< false
kTrueType = 2, //!< true
kObjectType = 3, //!< object
kArrayType = 4, //!< array
kStringType = 5, //!< string
kNumberType = 6 //!< number
};
RAPIDJSON_NAMESPACE_END
#endif // RAPIDJSON_RAPIDJSON_H_
